Purpose To ensure that the offshore subsea equipment spread is operated and maintained in an efficient, organised, and controlled manner in accordance with manufacturer operating manuals and project procedures. Carry out engineering duties within the back deck / subsea department, supporting the subsea team under the direction of the senior subsea lead. Develop technical knowledge and operational awareness to become fully conversant with the senior subsea engineer role. Operate as part of the vessel crew and work under the overall authority of the Vessel Master in line with vessel command structure. Duties & Responsibilities The Subsea Engineer shall: • Uphold project safety and environmental policies and ensure defects, incidents, near misses, and non-conformances are reported and investigated in line with applicable procedures. • Ensure that subsea personnel and technicians work in accordance with safe systems of work, including risk assessments and control measures prior to task execution. • Support supervision and coordination of subsea department personnel, maintaining discipline and compliance with applicable maritime codes of conduct. • Participate in vessel emergency response duties and drills as per the Muster List. • Assist with inspection, testing, and basic maintenance of vessel safety systems, including fire detection and alarm systems where required. • Take responsibility for safe and efficient operation of subsea systems when acting in a supervisory capacity or in the absence of the senior subsea lead. • Demonstrate full understanding of senior subsea engineer responsibilities, including launch and recovery of subsea assets and operational decision-making offshore. • Ensure subsea systems are operated within approved operational and insurance limitations. • Manage subsea systems during maintenance, refurbishment, or standby periods. • Coordinate subsea team activities including work allocation and watchkeeping in supervisory scenarios. • Support planning and execution of maintenance, repair, and overhaul of subsea equipment to ensure operational readiness at all times. • Escalate system downtime or reduced functionality to vessel leadership and onshore management where required. • Assist with reporting, documentation, and technical returns for subsea systems. • Maintain awareness of operational factors including vessel manoeuvrability, weather conditions, currents, and seabed characteristics. • Support training and development of junior technicians and subsea personnel. • Undertake additional duties within the subsea engineering discipline as required by vessel or project management.

Subsea Engineer

Project Manager – Major Offshore Campaigns London / Swindon / Northern Europe (Hybrid Offshore Travel) £800 per day (Contract) 6-month contract (with potential extension) The Opportunity We’re supporting a leading organisation in the offshore wind sector to recruit an experienced Project Manager to oversee major component replacement campaigns across a large-scale portfolio. This is a high-impact role focused on planning and delivering complex offshore operations, including heavy-lift vessel campaigns, while driving efficiency, safety, and performance across multiple assets. Key Responsibilities<ul><li>Lead readiness and planning for major component replacement campaigns (WTG >5MW)</li><li>Coordinate offshore marine operations, including jack-up vessel campaigns</li><li>Develop and optimise logistics strategies across a fleet-wide portfolio</li><li>Manage scheduling, operational priorities, and campaign execution</li><li>Act as a key interface between technical, engineering, and marine teams</li><li>Support vessel procurement, tendering processes, and contract negotiations</li><li>Ensure availability of marine assets, tooling, and service resources</li><li>Monitor campaign performance, driving cost efficiency and downtime reduction</li><li>Coordinate cross-functional stakeholders including engineering, supply chain, HSSE, and site teams</li><li>Deliver clear communication and reporting to senior stakeholders</li></ul>Requirements<ul><li>Proven experience in offshore wind project management</li><li>Strong understanding of:<ul><li>Wind turbine generator (WTG) technology</li><li>Heavy lift / jack-up vessel operations</li></ul></li><li>Background in Engineering (Mechanical, Electrical, or Offshore) or similar</li><li>Minimum 3 years’ experience managing complex projects</li><li>Excellent stakeholder management and communication skills</li><li>Ability to work across multiple teams and disciplines</li><li>Willingness to travel across Europe and spend time offshore</li></ul>Desirable<ul><li>GWO certification</li><li>Hands-on offshore experience</li></ul>Why Apply?<ul><li>Work on high-value, complex offshore campaigns</li><li>Join a leading renewable energy environment</li><li>Competitive day rate and exposure to large-scale offshore asset operations</li><li>Opportunity to influence fleet-wide performance and strategy</li></ul>

Project Manager

HSE Site Manager – Wind Farm Construction (Europe) We are seeking an experienced HSE Site Manager to support the construction of utility-scale wind farm projects across Europe. Key Responsibilities: <ul><li>Lead and manage all site HSE activities</li><li>Ensure compliance with local regulations and project requirements</li><li>Conduct audits, inspections, and incident investigations</li><li>Promote a strong safety culture across site teams and contractors</li></ul>Requirements: <ul><li>Proven experience in wind farm, renewable energy, or large-scale construction projects</li><li>Strong knowledge of HSE legislation and best practices</li><li>Excellent communication and leadership skills</li><li>Willingness to travel and work across Europe</li></ul>

HSE Site Manager

We are seeking a Lifting Appointed Person to support a data centre project in Belgium. We are seeking a Lifting Appointed Person who will: <ul><li>Act as the appointed person for all lifting operations, with authority to stop unsafe works.</li><li>Develop, review, and approve lift plans, RAMS, and method statements in line with LOLER, PUWER, and BS 7121.</li><li>Plan and manage all lifting activities, including crane selection, configuration, and capacity checks.</li><li>Assess ground conditions, crane standing, and temporary works requirements.</li><li>Coordinate crane operations, including erection, dismantling, and SIMOPS interfaces with other site activities.</li><li>Ensure all lifting personnel are competent, briefed, and working to approved lift plans.</li><li>Verify lifting equipment, accessories, certifications, and safe working limits.</li><li>Enforce safe systems of work, including weather restrictions, exclusion zones, and communication protocols.</li><li>Manage permits, lifting coordination, and site logistics.</li><li>Lead lifting inspections, audits, and incident investigations.</li></ul>We are seeking candidates with: <ul><li>Experience in lifting operations or crane management on large construction projects.</li><li>CPCS A61 Appointed Person qualification (or equivalent).</li><li>Strong knowledge of LOLER, PUWER, and BS 7121.</li><li>Experience producing and approving complex lift plans.</li><li>Experience with tower and/or mobile cranes on major projects.</li><li>Strong leadership and communication skills.</li><li>SMSTS or equivalent safety qualification.</li></ul>

Lifting Appointed Person

MEP Construction Manager  We are seeking an MEP Construction Manager to support a data centre project in Belgium. We are seeking an MEP Construction Manager who will: <ul><li>Support site safety management in coordination with the Safety Advisor, including setup, maintenance, and close-out of the project safety file.</li><li>Manage site quality assurance in coordination with the Mechanical Package Manager, including documentation setup and close-out.</li><li>Support project planning and scheduling in alignment with other trades, package leads, consultants, and client requirements.</li><li>Assist in managing package costs, including labour, subcontractors, materials, plant, variations, and valuations.</li><li>Oversee day-to-day site operations across assigned works.</li><li>Manage subcontractor activities, including progress tracking, manpower levels, and weekly coordination meetings.</li><li>Ensure weekly snagging and punch lists are issued, tracked, and closed out appropriately.</li><li>Submit direct labour and subcontractor hours to the time administrator for central tracking.</li><li>Attend site meetings, internal project reviews, engineering reviews, coordination meetings, and handover meetings.</li><li>Support project close-out, including O&M manuals, punch lists, safety files, QA documentation, and handover requirements.</li><li>Implement weekly look-ahead planning to ensure coordination between trades.</li><li>Produce weekly progress reports, including progress against WBS codes, risks, delays, and key issues.</li><li>Track and coordinate material deliveries in line with the project schedule.</li><li>Perform any other duties required to support successful project delivery.</li></ul>Requirements  <ul><li>Strong IT skills (MS Word, Excel, etc.).</li><li>Proven experience coordinating and managing large-scale projects.</li><li>Minimum 2 years’ experience in a supervisory role.</li><li>Strong organisational and communication skills.</li><li>Willingness to travel as required.</li></ul>

MEP Construction Manager

Electrical QA Inspector Location: Mons, Belgium We are seeking an Electrical QA Inspector to support the delivery of high-quality electrical fit-out works on a fast-paced, technically demanding project. This role is suited to someone detail-focused, highly organised, and confident in ensuring full compliance with project specifications and quality standards from installation through to handover. Key Responsibilities We are seeking an Electrical QA Inspector who will: <ul><li>Implement and maintain project quality systems in line with ISO 9001 and ISO 14001 standards.</li><li>Develop and maintain quality plans, procedures, manuals, and QA documentation.</li><li>Ensure client quality requirements are correctly submitted, approved, and implemented within agreed timelines.</li><li>Carry out site inspections, audits, and continuous quality checks on electrical installations.</li><li>Verify works including containment, cabling, and terminations in line with inspection and test plans.</li><li>Attend and coordinate inspections, benchmarking, and walkdowns with clients, subcontractors, and suppliers.</li><li>Maintain accurate QA records, including “Right First Time” documentation and inspection reports.</li><li>Ensure all certification and documentation is complete prior to system and area handover.</li><li>Support document control, ensuring records are updated in line with ISO requirements and project changes.</li><li>Report QA performance and issues directly to the Project Manager.</li><li>Attend weekly site meetings and support coordination with project teams and subcontractors.</li><li>Ensure QA/QC procedures are consistently applied across all site activities.</li><li>Support system and area handover to the client in line with project requirements.</li><li>Carry out audits and provide recommendations to improve quality performance.</li><li>Perform any other duties required to support project delivery.</li></ul>Requirements We are seeking candidates with: <ul><li>A relevant electrical qualification (third level or professional).</li><li>3 years’ experience in QA inspections on large-scale construction projects.</li><li>Experience with site walkdowns and inspection & test plans.</li><li>Strong understanding of QA/QC procedures and documentation control.</li><li>Excellent communication and reporting skills.</li><li>Strong organisational ability and attention to detail.</li><li>Proficiency in MS Office (Excel, Word, PowerPoint).</li><li>Ability to work under pressure and meet strict deadlines.</li></ul>

Electrical QA Inspector

Electrical Manager  We are looking for an Electrical Manager to join a major data centre project in Belgium. Responsibilities of the role:<ul><li>Establish performance and delivery criteria, ensuring client requirements are met</li><li>Liaise with the client and build a strong working relationship to support future project opportunities</li><li>Develop and administer quality control provisions; support project cost estimating and value engineering where appropriate</li><li>Liaise with the client on KPI development and implementation</li><li>Champion site safety implementation and participate in Safety Leadership Teams</li><li>Promote a strong quality culture on site and implement “Right First Time” practices</li><li>Track and report progress at weekly client update meetings</li><li>Liaise with the commercial team to ensure contracts, purchase orders, payment certificates, and change orders are issued in accordance with company policies</li><li>Manage the on-site project team and coordinate internal resources, including travel logistics</li><li>Plan all resources including labour, materials, and subcontractors</li><li>Lead and drive a large team to meet project requirements and deadlines</li><li>Produce and maintain installed drawings and O&M manuals</li><li>Ensure timely processing of requisitions, purchase orders, and delivery to site</li><li>Develop a detailed, constructible programme with the project planner</li><li>Maintain strong knowledge of electrical and mechanical systems including UPS, STS, EPMS, BMS, generators, busbar systems, and PDUs</li><li>Understand the requirements of working in a live environment and ensure continuity of client operations during construction</li><li>Liaise with the client regarding permits for all works in live environments and contribute to RAMS development</li><li>Ensure compliance with COHE policies and coordinate with vendors and subcontractors regarding LOTO procedures</li><li>Ensure adherence to all safety and quality standards</li><li>Carry out all other duties associated with the role</li></ul>Criteria and Qualifications:<ul><li>Trade qualification and/or relevant third-level qualification</li><li>5–10 years’ experience in project management</li><li>Proven experience coordinating and managing large installation projects</li><li>Experience dealing with industrial relations issues</li><li>Strong knowledge of Health & Safety practices</li><li>Experience in design and build environments</li><li>Strong technical knowledge of electrical and mechanical systems</li><li>Excellent IT skills</li><li>Strong communication skills</li><li>Ability to work to strict deadlines</li><li>Ability to lead and deliver large-scale projects</li></ul>

Electrical Manager

Electrical Engineer Location: Mons, Belgium We are looking for Electrical Engineers to join a data centre project in Belgium. We are seeking an Electrical Engineer who will:<ul><li>Manage electrical systems within your assigned package.</li><li>Liaise with key stakeholders including client, main contractor, suppliers, and subcontractors.</li><li>Review IFC/design information and support coordination into installation drawings via BIM, ensuring compliance with specifications and programme.</li><li>Manage RFIs, technical queries, and engineering coordination.</li><li>Support site safety and quality in conjunction with project, safety, and QA teams, including documentation close-out.</li><li>Support project planning to ensure engineering activities align with programme requirements.</li><li>Manage all package elements including labour, subcontractors, materials, plant, variations, and valuations.</li><li>Oversee day-to-day site operations and ensure compliance with procedures and standards.</li><li>Monitor subcontractor progress, manpower, and reporting requirements.</li><li>Ensure works are delivered to specification, QA standards, and agreed benchmarks.</li><li>Support work packs, snagging, validation, and handover activities.</li><li>Attend and contribute to site meetings and progress reviews.</li><li>Issue weekly cost and progress reports, including risks, delays, labour, and materials.</li><li>Manage material tracking, procurement, and delivery schedules.</li><li>Manage technical submittals and approvals.</li><li>Support BIM coordination and promote efficient engineering delivery methods.</li><li>Mentor junior engineers and support team development.</li><li>Support project close-out including O&M manuals, QA files, safety files, and final accounts.</li><li>Carry out other duties as required to support project delivery.</li></ul> Requirement <ul><li>Strong organisational, communication, and problem-solving skills.</li><li>Ability to manage workload and work independently or as part of a team.</li><li>Knowledge of HV/MV systems and modularisation is advantageous.</li></ul>

Electrical Engineer

Electrical Construction Manager Location: Mons, Belgium Contract: 6 months We are currently recruiting an Electrical Construction Manager for a 6-month contract based in Mons, Belgium. Key Responsibilities<ul><li>Assist and take a leading role in site safety management in collaboration with the project and safety teams.</li><li>Provide leadership in site quality assurance alongside the QA Manager.</li><li>Manage, monitor, and report all project costs, including labour, materials, plant and equipment, variations, and valuations.</li><li>Support the coordination and oversight of daily site operations.</li><li>Ensure accurate reporting of direct labour and subcontractor hours to the time administrator for central tracking.</li><li>Chair and contribute to site meetings, including internal project reviews, engineering and planning coordination meetings, and handover meetings.</li><li>Support project close-out activities, including final account settlement, O&M manuals, punch lists, safety files, QA documentation, equipment and plant relocation, and project plan completion, in conjunction with the site project manager.</li><li>Ensure team input into weekly progress reports compiled from supervisors, highlighting percentage completion against WBS codes and identifying any risks or issues.</li><li>Provide strong safety and quality leadership across all project activities.</li><li>Ensure all subcontractor documentation, including safety records, is kept up to date and properly archived.</li><li>Assist in labour forecasting based on input from field supervisors.</li><li>Work with the commercial team to ensure all variations are identified, captured, and costed for client submission.</li><li>Carry out any other duties required to support successful project delivery.</li></ul>Essential Criteria <ul><li>5–7 years’ experience as a Construction Manager or Supervisor on large-scale industrial construction projects.</li><li>Trade background or third-level qualification in engineering or construction-related discipline.</li><li>Proven experience coordinating and managing complex, large-scale projects.</li><li>Pharmaceutical industry experience is advantageous.</li></ul>

Electrical Construction Manager

Location: Mons, Belgium Contract: 6 Months We are currently recruiting for an Office Administrator to join a busy project team in Mons on a 6-month contract. Key Responsibilities<ul><li>Provide general administrative support to the project team.</li><li>Manage incoming emails, calls, and general queries.</li><li>Support meeting coordination, scheduling, and preparation.</li><li>Raise purchase orders and process invoices.</li><li>Maintain office supplies and assist with stock control.</li><li>Support facilities coordination, including reporting and tracking issues.</li><li>Assist with travel bookings and general office administration.</li><li>Maintain accurate filing systems and project records.</li><li>Provide ad hoc administrative support as required.</li></ul>Requirements<ul><li>Previous experience in an administrative or office support role.</li><li>Strong organisational and multitasking skills.</li><li>Good communication skills.</li><li>Proficient in Microsoft Office (Word, Excel, Outlook).</li><li>Strong attention to detail and ability to work under pressure.</li><li>Proactive and reliable approach.</li></ul>This is a great opportunity to join a fast-paced project environment and support a dynamic team on a key project in Mons.

Administrator

Document Controller Location: Mons, Belgium Contract Type: Contract Duration: 6 Months We are currently seeking a Document Controller to join a major construction project in Mons, Belgium. This is an excellent opportunity for an organised and detail-oriented professional to support the management and control of project documentation within a fast-paced environment. Key Responsibilities<ul><li>Manage and distribute project documents and drawings to relevant stakeholders.</li><li>Maintain document control systems and registers, ensuring accuracy and compliance.</li><li>Perform quality checks on incoming documents and drawings.</li><li>Issue transmittals and submissions to clients and project teams.</li><li>Track outstanding documentation and provide regular progress reports.</li><li>Update the Master Information Delivery Plan (MIDP) and document registers.</li><li>Support the management of O&M documentation and project handover requirements.</li><li>Produce reports for project management and clients.</li><li>Ensure document naming conventions and project procedures are followed.</li><li>Provide general administrative support and assist with process improvements.</li></ul>Requirements<ul><li>Previous administration or document control experience.</li><li>Strong Microsoft Office skills, particularly Word, Excel, and Outlook.</li><li>Excellent attention to detail and organisational skills.</li><li>Ability to manage multiple tasks and work under pressure.</li><li>Strong communication and interpersonal skills.</li><li>Fluent English language skills.</li></ul>Desirable<ul><li>Experience within the construction or engineering sector.</li><li>Knowledge of document management systems such as BIM360, ACC, Procore, or Asite.</li><li>Proactive approach and strong team-player mentality.</li></ul>If you are an organised and motivated Document Controller looking for your next contract opportunity, we would love to hear from you.

Document Controller

Authorised Person (AP) – Electrical Location: Helsinki, Finland We are seeking an experienced Electrical Authorised Person to join a major project in Helsinki, Finland. This role will support the safe management, commissioning, energisation, and operation of LV/MV electrical systems within a critical infrastructure environment. Key Responsibilities<ul><li>Manage and control LV/MV electrical systems, switching operations, and isolations.</li><li>Issue, approve, and close electrical permits to work.</li><li>Authorise energisation and isolation requests.</li><li>Carry out switching activities in accordance with approved procedures.</li><li>Support commissioning and energisation activities from Level 1 to Level 5.</li><li>Perform electrical testing, inspections, and pre-energisation checks.</li><li>Ensure compliance with electrical safety rules, site procedures, and local regulations.</li><li>Identify hazards and implement appropriate control measures.</li><li>Support audits, incident investigations, and continuous improvement initiatives.</li></ul>Requirements<ul><li>Qualified Electrician with a recognised electrical qualification.</li><li>Previous experience working as an Authorised Person (AP).</li><li>Strong knowledge of LV/MV systems, switching procedures, and permit-to-work systems.</li><li>Experience within data centres, industrial, utilities, infrastructure, or energy projects.</li><li>Ability to read and interpret electrical drawings and schematics.</li><li>Strong understanding of electrical safety regulations and commissioning processes.</li></ul> If you are an experienced Authorised Person looking for your next contract opportunity, we'd love to hear from you.

Authorised Person - Finland

Deputy Senior Authorised Person (SAP) Location: Munich, Germany Contract Type: Freelance / Contract Start Date: ASAP We are currently recruiting for an experienced Deputy Senior Authorised Person (SAP) to join a major engineering and construction project in Munich, Germany. This is an excellent opportunity to work on a high-profile, safety-critical project within a fast-paced environment, supporting the delivery of complex electrical infrastructure. The successful candidate will play a key role in the safe management of HV/LV systems, supporting switching operations, commissioning activities, and ensuring compliance with all electrical safety procedures. Key Responsibilities<ul><li>Support the management and operation of HV/LV electrical systems and associated switching activities.</li><li>Ensure all electrical works are carried out safely and in compliance with site procedures, electrical safety rules, and industry regulations.</li><li>Prepare, issue, and control permits to work, isolations, and switching schedules.</li><li>Assist with commissioning, energisation, and system handover activities.</li><li>Conduct risk assessments and contribute to the development of safe systems of work.</li><li>Monitor compliance with health, safety, and environmental requirements across all electrical activities.</li><li>Liaise with project teams, subcontractors, and stakeholders to coordinate the safe execution of electrical works.</li><li>Support the Senior Authorised Person in maintaining electrical safety standards across the project.</li></ul>Requirements<ul><li>City & Guilds HV/LV Authorised Person certification or equivalent.</li><li>Previous experience working in an Authorised Person (AP) or Deputy SAP capacity.</li><li>Strong experience managing HV/LV electrical systems within data centres, industrial, infrastructure, utilities, or energy projects.</li><li>Comprehensive understanding of electrical safety rules, switching procedures, isolations, and permit-to-work systems.</li><li>Experience supporting commissioning and energisation activities.</li><li>Strong communication, organisational, and leadership skills.</li><li>Ability to work effectively in a safety-critical environment.</li><li>Eligibility to work in Germany or the EU is preferred.</li></ul>What's on Offer<ul><li>Opportunity to work on a large-scale, high-profile project.</li><li>Long-term contract potential.</li><li>Competitive contract rates.</li><li>Exposure to complex critical infrastructure and advanced technology environments.</li><li>Immediate start available.</li></ul>If you are an experienced Electrical AP or Deputy SAP looking for your next contract opportunity, we would be keen to hear from you.

Deputy Senior Authorised Person

Offshore Medic Vessel : CLV Atalanti Project: Ostwind 6.1 Mob Date: approx. mid-July Duration: approx. 4 weeks Position: Medic Advisor Mob: Germany SoW: Cable pull-in, laying, burial   Required Certificates 1. Valid Medical Fitness Certificate OGUK 2. Valid Maritime Safety Training Certificate (GWO) 3. WAH one year updated 4. Chester step 5. A1 certification 6. For non-EU citizens, working permit

Offshore Medic

Deputy SAP – Munich, Germany Location: Munich, Germany Contract Type: Freelance / Contract Start Date: ASAP We are currently seeking an experienced Electrical Authorised Person to join a major project in Munich, Germany. This is an excellent opportunity for a skilled AP with strong HV/LV experience to work on a high-profile project within a safety-critical environment. Key Responsibilities: <ul><li>Manage and oversee HV/LV electrical systems and associated switching operations.</li><li>Ensure all electrical works are carried out safely and in accordance with site procedures and industry regulations.</li><li>Issue and control permits to work, isolations, and switching schedules.</li><li>Support commissioning and energisation activities.</li><li>Conduct risk assessments and ensure compliance with all health and safety requirements.</li><li>Liaise with project teams, contractors, and stakeholders to ensure the safe execution of electrical works.</li></ul>Requirements: <ul><li>City & Guilds HV/LV Certification.</li><li>Experience working in an Authorised Person (AP) capacity.</li><li>Proven experience managing HV/LV electrical systems within industrial, infrastructure, energy, or data centre environments.</li><li>Strong understanding of electrical safety rules, switching procedures, and permit systems.</li><li>Excellent communication and organisational skills.</li><li>Eligibility to work in Germany or the EU is preferred.</li></ul>If you are an experienced Electrical AP looking for your next contract assignment, please get in touch for further details.

Senior Authorised Person

Electrical Critical Facility Technician Multiple Openings Available Security Clearance: Ability to obtain and maintain a Secret Clearance (U.S. Citizenship required) The Opportunity Our client is seeking multiple experienced Electrical Critical Facility Technicians to support the operation, maintenance, and reliability of mission-critical infrastructure. These roles are ideal for hands-on technicians with experience in data centers, healthcare facilities, government sites, or other critical environments where uptime and operational excellence are essential. You will play a key role in maintaining and troubleshooting electrical and mechanical systems that support continuous operations, helping to ensure the reliability, safety, and performance of critical facilities. Key Responsibilities <ul><li>Operate, maintain, and troubleshoot critical electrical and mechanical infrastructure.</li><li>Support the reliability and performance of power distribution systems in mission-critical environments.</li><li>Perform preventive and corrective maintenance on critical equipment.</li><li>Diagnose and resolve system faults using electrical testing and diagnostic equipment.</li><li>Read and interpret electrical schematics, blueprints, and technical documentation.</li><li>Ensure all work is performed in accordance with safety, compliance, and operational standards.</li></ul>Technical Experience Required Candidates should have experience with some or all of the following: <ul><li>Electrical power systems (AC & DC)</li><li>Switchgear and power distribution equipment</li><li>Uninterruptible Power Supplies (UPS) and battery systems</li><li>Standby generators and fuel systems</li><li>Automatic Transfer Switches (ATS)</li><li>Building Management Systems (BMS)</li><li>Electrical Power Monitoring Systems (EPMS)</li><li>Electrical testing equipment, including multimeters, DLROs, and infrared scanning tools</li></ul>Qualifications <ul><li>High School Diploma, GED, or equivalent.</li><li>Minimum of 6 years of relevant technical experience.</li><li>At least 3 years of experience working in a critical facility environment such as a data center, hospital, government facility, or similar high-availability operation.</li><li>Strong electrical troubleshooting and maintenance experience with systems such as switchgear, generators, UPS, and power distribution equipment.</li><li>Current City of Harrisburg Electrical License preferred.</li><li>Ability to obtain a City of Harrisburg Electrical License within one year of employment.</li></ul>Security Requirements Applicants selected for these positions will be subject to a government security investigation and must be eligible to obtain and maintain a Secret Security Clearance. U.S. Citizenship is required.

Electrical Critical Facility Technician

Overview: We are looking for a DP Trials Specialist to lead and support Dynamic Positioning (DP) trials on offshore vessels. T Key Responsibilities:<ul><li>Plan and execute DP trials including FMEA proving trials and annual DP trials</li><li>Develop and review DP trial procedures and test scripts</li><li>Validate DP system redundancy, failure modes, and worst-case scenarios</li><li>Record, analyse, and report trial results and findings</li><li>Liaise with vessel crew, clients, class, and third-party specialists during trials</li></ul>Requirements:<ul><li>Strong experience with DP systems and offshore vessel operations</li><li>Proven experience conducting DP trials (FMEA/annual trials)</li><li>Good knowledge of IMCA guidelines and class requirements</li><li>DP Operator Certificate or relevant engineering background</li></ul>

DP Trials Specialist

ROV Supervisor Mob Date: approx. mid-end July Duration: approx. 4-5 weeks Position: ROV Supervisor Mob: Germany SoW: Cable pull-in, laying, burial Required Certificates 1. Valid Medical Fitness Certificate OGUK 2. Valid Maritime Safety Training Certificate (GWO) 3. WAH one year updated 4. Chester step

ROV Supervisor

Array Cables Termination & Joint Inspector Duration: 27-Jul-2026 - 30-Sep-2027 Business Unit: Construction Rotations: 4 weeks on, 4 weeks off Description: Mobilisation on 1/08/2026 in Hull, UK Contract start date 1 week prior to mob date, with client access confirmed (27/07/2026) PPE: provided by the Resource Coordination & Project Teams, Consultant should take with them client branded PPE if provided in the last years Travel: mobilisation travel expenses will be covered by the Project, subject to pre-approval from the OIM Manager. The client will cover mileage for personal car use to travel for mob/demob. Parking at the airport will be covered and organised by the construction team. Information of recommended hotel will be shared by Lead Inspector. Rotations: 4 weeks on / 4 weeks off Responsibilities • Acting as clients representative for the inspection and quality assurance of jointing, termination and testing (T&T) of cables at site • Understand client quality technical requirements (TRs) and product relevant IEC standards, and ensure that supplier comply with all the above at site • Inspecting cable systems including cable hang off systems and termination of high voltage cable (HVC) and fibre optic cable (FOC) at Offshore Substations (OSS) or Foundations (FOU) location in accordance with project requirements, TRs, standards and designated inspection reporting tool • QA/QC inspections of termination work • Witnessing VLF, sheath, HVRT and OTDR testing, as well as other cable or termination test that might be required • Reviewing T&T-related documentations including procedures are in accordance with accepted Risk Assessment Method Statement (RAMS) from supplier/contractor prior to offshore/onshore T&T campaign • Complying with and enforcing client QHSE requirements at site • Preparing Daily Progress Report (DPR) to Export or Array Cable Technical Scope Manager (depending on allocated scope) and updating progress table as required by the Project • Preparing or ensuring approved Permit-to-Work is in placed prior to T&T activities at site • Interfacing and ensuring effective communication with Wind Turbine Generator (WTG), Foundation (FOU), Offshore Substation (OSS), Construction/ Offshore Logistics (CONS) and Offshore Cable Installation (OCI) teams at site, where relevant • Preparing or adapting inspection checklists for testing activities during offshore T&T phase (incl. use of Digital Inspection Tool, DIT) • Ensuring cable T&T activities are carried out in safe environment and in due time, including ensuring availability of calibrated test equipment at site • Gathering weather data and ensuring T&T activities can be carried out within acceptable weather window at site • Ensuring daily shift report is handed over and clearly communicated to the next inspector by end of shift • Responsible for Management of Change (not covered under change request), where required • Responsible for the punch list, handover certification, non-conformance report (NCR) management and lesson learnt in Synergi during offshore T&T phase. This includes communicating any non-conformance/damage defect notifications at site to client Project Engineer and Technical Scope Manager • Reviewing and accepting T&T-related as-built documentations, where required • Participating in internal team and external supplier’s T&T-related meetings We encourage profiles with fiber optical cable termination experience Requirements: Minimum 6 years offshore working experience & valid certificates to proof the Consultant is qualified to work offshore as a Jointer for 66-kV connections such as Pfisterer and TE Tyco or nkt. Compulsory: GWOs, Seafarers Offshore Medical, Advanced First Aid Course (we do not accept refreshers, it needs to be a full course), Firefighting course, Sea survival and transfer training, Climbing and Rescue at heights training (needs to be renewed every year for DE!), confined space training, Helicopter transfer Desirable: HV/MV Jointing training or experience, VLF testing training or experience, OTDR testing training or experience, Safe Work in High Voltage Substation Environments and Safe Work in Low Voltage Substation Environments Possesses the skills of HV/MV cable jointing/termination, cable ladder/cleating systems, subsea cable hang off systems, earthing and bonding of cable systems, CDM regulations 2015 (where relevant) and preferably experience with client IT tools/procedures .

Array Cables Termination and Joint Inspector

Quality Engineer – FOU Duration: 1/7/2026 – 30/6/2027 Project: Nordsee Cluster B Location: Essen, Germany       Your tasks • Be the Quality Engineer on the Foundation and the Inter Array Cable Package for NSC  Project reporting to the Project Quality Manager, Package Manager, and line organisation on the scope of delivery. • Project planning co-ordination and control of quality activities for the Foundation Contractor “Consortium” their Manufacturers, Fabricators, Civil Contractors, Installers and their supply chains. • Project planning co-ordination and control of quality activities for the Inter Array Cable Contractor “Consortium” their Manufacturers, Fabricators, Civil Contractors, Installers and their supply chains. • Implement contractual and corporate quality and technical requirements within the project packages. • Plan and manage the production/installation monitoring and inspection of equipment at manufacturing plants, fabrication sites, onshore and offshore sites from design to handover to O&M/OFTO with all deliverables and checks. • Co-ordinate multi-disciplined teams of inspectors managed by the Quality Manager both onshore and offshore in the delivery of scope of works. • Evaluation of reports, inspection results and findings from Contractor and Employer Systems. • Capture all work progress, inspections, and non-conformities (NC) in client's Quality inspection app and monitor and report on compliance and progress of work. Assess non-conformities, conduct root cause analysis and follow-up of correction and corrective action process. • Manage document deliverables to acceptance ready for take-over • Perform supplier qualification and assessment and continuously develop supplier quality. Your profile • Successfully completed university degree or significant experience in an Engineering Environment as well as additional qualifications as quality engineer, quality manager or comparable. • Professional experience and expertise in quality assurance, control/monitoring and management • Comprehensive expertise in offshore wind farm foundations and cables. • Extensive knowledge in the application of relevant international project and quality management standards as well as technical regulations and standards such as IEC, BSH, DNV, BS/EN/ISO and NORSOK etc. • Practical experience from the construction and/or manufacturing industry with a good understanding of foundation and cable OEMs, and the Supply Chain. • Able to demonstrate a good understanding of quality requirements and risks in onshore and offshore environment and the associated standards. • Business fluent in written and spoken English with a very good knowledge of common IT tools and systems. • Motivation to independently and sustainably advance your cause and the ability to keep an overview at all times in hectic project business. • You are an empathetic, reliable and motivated team player with a willingness to travel in accordance client Travel Policies in delivery of scope of work. • Ready to work from NSC office in Hamburg for approximately 60% of the time

Quality Engineer

Control Engineer 400kV 15/06/2026 – 31/03/2028 Monday – Friday Norwich Responsible for co-ordination of LV/MV/HV operations Responsibilities · Advise operationally on high voltage electrical installations to WTG, offshore substations and both HV submarine and onshore cables · Oversee all MV/HV/LV electrical operational activities to ensure safety, security and integrity of the HV network · Planning of all switching activities on sites, both offshore and onshore activities · Monitoring and reporting in the SCADA-system · Managing and controlling a complete log of all activities on site including all switching activities · Controlling the safety documents for the Electrical Safety Rules on site · Controlling and managing all HV- and LVelectrical operations on site · Define safety procedures for electrical matters · Oversee safe commissioning of grid connections, onshore substations and associated MV/HV/LV plant and equipment · Following the Code Compliance in the relevant Country · QA on the different ISO requirements in the project · Reviewing the high voltage scope of work · Develop reference documentations and processes · Knowledge and experience with country specific standards · Knowledge of 50Hz and 60Hz standards for the electrical equipment Deliverables · Managing all electrical operations on site via the Control Log · Control all high voltage switching activities both offshore and onshore · Monitoring and acceptance of all LV Switching activities on site · In charge of all switching programs · Planning of outages of the windfarm together with the Project Commissioning Team · Always keep and provide safety from the systems • Complete overview of all electrical operations on site · Control of resources and work activities · Perform communication of complex technical and commercial issues · Implementation of the client Electrical Safety Rules on site, including the safe system of work Decision Authority · In charge of MV/HV switching and isolations · Consent of client Electrical Safety Rules safety rules documents Qualifications & Requirements · Several years of operation and commissioning experience within the field of high voltage electricity, offshore experience preferable · Appropriate electrical qualification and background related to the authorization scope. · Minimum 3 year of working experience within onshore substations systems

Controls Engineer

We are seeking an Assistant Construction Manager to support the successful delivery of major construction and EPC projects. Working closely with the Construction Manager and Project Management team, you will assist with the day-to-day coordination of project activities, ensuring work is completed safely, on schedule, within budget, and to the required quality standards. This role involves supporting project planning, contractor and supplier management, cost tracking, scheduling, procurement, contract administration, documentation control, and client communication. You will also help coordinate site activities, manage project records, monitor progress, and support project reporting and closeout activities. Key responsibilities include:<ul><li>Supporting day-to-day project delivery and site operations</li><li>Assisting with project planning, scheduling, and cost control</li><li>Coordinating subcontractors, suppliers, and project teams</li><li>Managing project documentation, RFIs, submittals, and change orders</li><li>Supporting health, safety, and quality compliance across the project</li><li>Tracking project progress, budgets, and reporting requirements</li><li>Assisting with procurement, permits, and contract administration</li><li>Supporting workforce planning, onboarding, and craft labour management</li><li>Helping manage materials, equipment, and site logistics</li><li>Maintaining strong relationships with clients, contractors, and stakeholders</li></ul>This is an excellent opportunity for a construction professional looking to develop their project management experience within large-scale infrastructure, utility, energy, or EPC projects.

Assistant Project Manager

We are seeking an experienced Construction Project Manager with a strong background in Transmission & Distribution (T&D) projects to join a major construction project based in St. Louis, Missouri. In this role, you will oversee the delivery of construction activities from planning and mobilisation through to completion and handover. You will be responsible for managing project safety, quality, schedules, budgets, contractors, suppliers, and client relationships to ensure successful project delivery. Key Responsibilities: <ul><li>Manage day-to-day construction activities</li><li>Lead project planning, scheduling, and cost control</li><li>Coordinate subcontractors, suppliers, and project teams</li><li>Maintain strong client and stakeholder relationships</li><li>Manage contracts, change orders, and project documentation</li><li>Monitor project progress, quality, and financial performance</li><li>Support commissioning, project closeout, and handover activities</li><li>Ensure compliance with safety, quality, and regulatory requirements</li></ul>Requirements: <ul><li>Previous experience managing Transmission & Distribution (T&D) projects is essential</li><li>Proven experience delivering large-scale construction or EPC projects</li><li>Strong understanding of project controls, scheduling, budgeting, and contract management</li><li>Excellent leadership and stakeholder management skills</li></ul>This is an excellent opportunity for a construction professional who enjoys leading teams, managing complex projects, and delivering successful outcomes within the T&D sector.

Construction Project Manager

Overhead Linesman – Distribution Networks Location: Northern Ireland We are looking for an experienced Overhead Linesman to join our client’s team on key distribution network projects. If you take pride in safe, steady, hands-on work and want a role where your skills make a real impact, this role will suit you. What you will do <ul><li>Build, repair, and maintain overhead power lines on LV and HV distribution networks</li><li>Install poles, hardware, conductors, stays, and related equipment</li><li>Work as part of a focused crew to deliver work safely and on time</li><li>Respond to faults and carry out emergency repairs when needed</li><li>Follow all safety procedures and keep accurate job records</li></ul>Required skills <ul><li>Solid training and experience in the electricity industry</li><li>Practical experience with overhead line works</li><li>Strong understanding of Health and Safety and how to apply it on site</li><li>Clear communication skills and a strong team approach</li></ul>

Overhead Linesman

Vessel Coordinator – Offshore Operations Support – Senior Duration: 01/08/2026 Location: Grimsby, Lincolnshire Type: Inside IR35 Rotations: 2/2   Responsibilities   Senior Vessel Coordinator <ul><li>Coordinate daily activities with the Marine and Helicopter Coordination Centre.</li><li>Schedule and facilitate meetings; maintain effective communication with project stakeholders.</li><li>Ensure compliance with project procedures, operational processes, and IT tools.</li><li>Provide support to HSE initiatives and activities as needed.</li><li>Contribute to lessons learned and submit change requests for continuous improvement.</li><li>Participate in the Daily Planning Meeting by providing relevant operational input.</li><li>Serve as the primary point of contact between contractors and marine crew.</li><li>Assist in the coordination of all vessels operating within the field.</li><li>Submit and verify daily reports submitted by the vessel (Activity Reports).</li><li>Promote discipline and accountability among industrial personnel on site.</li><li>Actively foster and reinforce a strong safety culture among vessel crews and offshore teams.</li><li>Lead the Daily Planning Meeting when delegated or required.</li><li>Provide coverage for selected Site Manager responsibilities when necessary.</li><li>Identify and propose improvements to the Offshore Site Management scope, tools, and procedures.</li></ul>  Tasks <ul><li>Planning & Coordination of Construction SOV, marine and Helicopter activities, including preparation of relevant documentation. </li><li>Provide lookahead for daily planning</li><li>Liaison with the Packages & Contractors to keep operational conflicts to a minimum  </li><li>Liaison with Offshore Operations/regarding use of CTV Timings</li><li>Daily dialogue with relevant Contractors & vessel crew to ensure compliance with site procedures and OMS </li><li>Ensure all vessels master’s complete Induction </li><li>Assisting construction manager with tasks as required </li><li>Chair / attend interface and kick off meetings with contractors. </li><li>Ensuring personnel are approved within OMS. </li><li>Assistance with SOV port calls</li><li>Providing input into Lessons Learnt for future projects. </li><li>Co-ordination of SOV crew changes</li><li>Tracking and control of all cargo on/off the SOV, including declarations to relevant authorities.  </li><li>POC between Contractors/Vessel Crew offshore back to onshore and vice versa</li><li>Ensuring personnel are approved for use of the W2W system</li></ul>  Deliverables <ul><li>Personnel manifests for crew changes and daily operations.</li><li>Cargo Manifests.</li><li>3DLA</li><li>Daily coordination e Execution plan.</li><li>Activity reports.</li><li>Safety walk and HSE reports</li><li>Captain’s meeting minutes.</li></ul>  Mandatory: • GWO courses: Sea Survival, Working at Heights, First Aid, Fire Awareness, Manual Handling • HUET • Medical certificate including chester step

Vessel Coordinator

Subsea Engineer (Offshore Vessel) Overview The Subsea Engineer is responsible for the safe and efficient operation, maintenance, and control of subsea equipment systems onboard an offshore vessel. Working within the back deck/subsea department and reporting to the Chief Subsea Engineer, this role supports subsea operations and ensures equipment is maintained in line with operational procedures and manufacturer guidelines. The position also contributes to developing capability to step into senior responsibilities when required. Key Responsibilities <ul><li>Operate and maintain subsea equipment systems in a safe, efficient, and controlled manner</li><li>Support subsea operations onboard, working closely with the Chief Subsea Engineer</li><li>Ensure all subsea activities are carried out in accordance with safety procedures, risk assessments, and operational standards</li><li>Assist in supervising subsea personnel, including technicians and junior engineers</li><li>Take responsibility for subsea systems during periods of supervision or in the absence of the Chief Subsea Engineer</li><li>Be capable of supporting launch and recovery operations of subsea equipment (e.g. submersibles/ROV systems)</li><li>Contribute to maintenance, repair, and overhaul of subsea equipment to ensure operational readiness</li><li>Monitor system performance and report any operational or technical issues in a timely manner</li><li>Support planning and execution of maintenance and refurbishment activities</li></ul>Operational Duties <ul><li>Assist in managing subsea system operations, including allocation of work and team coordination</li><li>Support reporting processes, including operational logs and system reporting</li><li>Maintain awareness of key operational factors such as vessel positioning, weather, currents, and seabed conditions</li><li>Ensure subsea systems remain compliant with operational and safety requirements at all times</li><li>Assist in training and development of junior subsea personnel</li></ul>Additional Duties <ul><li>Participate in vessel emergency response and safety procedures</li><li>Assist with inspection and maintenance of onboard safety systems where required</li><li>Support safe working practices and ensure all tasks are conducted with appropriate controls in place</li><li>Undertake additional duties in support of offshore operations as required</li></ul>Candidate Profile Ideal candidates will have: <ul><li>Experience in subsea engineering, ROV, or submersible operations offshore</li><li>Background working onboard offshore vessels or subsea projects</li><li>Knowledge of subsea equipment systems, maintenance, and operations</li><li>Experience supervising or supporting technicians or subsea crews</li><li>Strong understanding of offshore safety standards and procedures</li><li>Ability to work in a rotational offshore environment</li></ul>

HSE Expert Landfall – Principal Contractor Duration: 15/06/2026 to 31/01/2027 Rotation: Monday-Friday, 8 hours a day Location: Lowestoft, UK Project: Vanguard Type: Outside IR35 Freelance Description: 1. Role Purpose To provide independent HSE assurance and oversight in support of the Principal Contractor’s duties under the Construction (Design and Management) Regulations 2015, ensuring that Contractors plan and execute their works safely and in compliance with PC/CDM requirements, without harm to people or the environment. The HSE Expert will act as the Principal Contractor’s HSE representative on site, supporting and verifying that Contractors discharge their own HSE responsibilities. The role focuses on monitoring and influencing safe working practices throughout the construction of work scopes at the onshore landfall area of the project, without taking over operational control of Contractor activities. 2. Key Responsibilities Principal Contractor CDM Oversight <ul><li>Support the Principal Contractor in demonstrating compliance with CDM Regulation 13 (Principal Contractor duties), with a clear focus on assurance and verification rather than direct operational management.</li><li>Monitor Contractor activities to ensure effective compliance with the Construction Phase Plan, Principal Contractor arrangements and project HSE standards.</li><li>Verify that Contractors and Subcontractors are discharging their duties appropriately (risk assessments, method statements, permits, competence, coordination and interface management).</li><li>Provide clear, evidence based feedback to the Principal Contractor HSE Manager on the adequacy and effectiveness of Contractor HSE management systems.</li><li>Coordinate and monitor overlapping contractor activities to ensure that interface risks, simultaneous operations and shared work areas are effectively planned, communicated and controlled.</li><li>Review interface risks between work packages, Contractors and subcontractors, ensuring that responsibilities, boundaries and control measures are clearly defined and understood.</li><li>Participate in SIMOPS planning and coordination reviews to verify that concurrent high-risk activities are assessed appropriately and managed in accordance with project HSE requirements.</li></ul> HSE Assurance and Monitoring <ul><li>Conduct regular site inspections, HSE tours and audits focusing on key risk areas, including (but not limited to):</li><li></li><li>Confined spaces and enclosed areas</li><li></li><li>Energy isolation, stored energy hazards and release of mechanical, hydraulic, pneumatic or electrical energy</li><li>Lifting operations and lifting equipment</li><li></li><li>Interface management and SIMOPS (multiple Contractors and public interface)</li><li>Identify unsafe acts and conditions, ensuring timely follow‑up with responsible duty holders and clear escalation where repeated or serious non‑conformances arise.</li><li>Ensure compliance with UK legislation, Client HSE standards, CDM 2015 and relevant ISO 45001 requirements.</li><li>Verify that appropriate emergency preparedness and response arrangements are established for landfall activities, including emergency access and egress, rescue arrangements and communication protocols.</li><li>Monitor the adequacy of confined space emergency and rescue arrangements, ensuring that equipment, competence and response capabilities are suitable for the planned activities.</li><li>Support coordination and interface management with public emergency services and relevant external stakeholders where required for high-risk or emergency response scenarios.</li><li>Verify that appropriate environmental emergency response measures, including spill prevention and spill response arrangements, are implemented and maintained for relevant work activities.</li><li>Verify that temporary works coordination, control measures and assurance activities are implemented in accordance with project requirements and applicable standards.</li><li>Monitor excavation support systems, temporary structures and associated high-risk interfaces to ensure ongoing structural stability and safe execution of works.</li><li>Review lifting operations involving temporary works or temporary structures to ensure that interface risks, load considerations and control measures are adequately assessed and managed.</li></ul> Reporting and Communication <ul><li>Prepare concise weekly HSE reports for the Principal Contractor summarising:</li><li>HSE performance and key indicators</li><li>Significant findings from inspections and audits</li><li>Recurring issues, emerging trends and high‑risk activities for the upcoming period</li><li>Status of corrective actions and any overdue items</li><li>Clearly communicate escalation triggers (e.g. serious or imminent danger, repeated non‑compliance, high potential events) and escalate promptly to the Principal Contractor HSE Manager, Project HSE Manager and functional HSE line as required.</li><li>Participate in package and coordination meetings with associated Contractors, including onshore landfall and offshore cable interfaces, raising HSE concerns and promoting proactive management of risk..</li></ul> Leadership and Culture <ul><li>Promote a strong “We Care” culture across the project team and Contractors, emphasising personal accountability and proactive leadership on HSE.</li><li>Champion proactive reporting of observations, near misses and good practices, ensuring feedback and visible close out.</li><li>Encourage workforce engagement and wellbeing initiatives aligned with Client/Project values, including targeted toolbox talks, safety stand￼downs and campaigns related to key risk areas (e.g. lifting and confined spaces).</li><li>Promote awareness and proactive management of critical risk activities, including stored energy hazards and energy isolation</li></ul> Key Interfaces <ul><li>Principal Contractor Team (General Site Manager, Offshore Site Manager, Landfall / Site Managers, PC HSE Manager) and Tier 1 Contractors.</li><li>Client Project Team (Client/Project HSE Manager, Package Managers and Environmental Lead).</li><li>Functional HSE organisation for governance, standards and assurance.</li></ul> Qualifications and Experience Essential: <ul><li>NEBOSH General or Construction Certificate (or equivalent Level 3 H&S qualification).</li><li>Member of IOSH (TechIOSH).</li><li>Experience within offshore wind, infrastructure, utilities or complex construction projects involving multi-contractor interfaces.Strong knowledge of CDM 2015, UK HSE legislation and environmental requirements.</li><li>Experience auditing and monitoring Contractors under CDM on complex multi‑contractor projects.</li><li>Effective communication, influencing and reporting skills, with proven ability to challenge constructively and maintain independence.</li><li>First Aid at Work, CSCS Card or equivalent</li></ul> Desirable: <ul><li>NEBOSH National Diploma (or equivalent Level 6 H&S qualification).</li><li>Member of IOSH (CertIOSH or CMIOSH).</li><li>ISO 45001 Lead Auditor qualification.</li><li>Root cause analysis training (e.g. Taproot, Tripod, Kelvin TOP‑SET).</li></ul> Personal Attributes <ul><li>Proactive, confident communicator with a collaborative mindset, able to build strong relationships while maintaining independent assurance.</li><li>Able to balance assurance, coaching and support roles without compromising independence or clarity of Contractor responsibilities.</li><li>Strong ethical approach and commitment to continuous improvement.</li><li>Able to adapt to changing site conditions (including offshore and marine environments), shifting priorities and multiple stakeholder expectations.</li></ul> Typical Deliverables <ul><li>Weekly HSE inspection and assurance reports, including prioritised actions and owners.</li><li>Documented HSE walkdown and audit findings, with follow up verification of close‑out.</li><li>HSE contributions to method statement and permit to work reviews for high risk tasks.</li><li>Timely notification, support and documentation for incident reporting, investigations and root cause analyses, including recommendations and lessons learned.</li></ul> Scope of Work To provide independent HSE assurance and oversight in support of the Principal Contractor’s duties under the Construction (Design and Management) Regulations 2015, ensuring that Contractors plan and execute their works safely and in compliance with PC/CDM requirements, without harm to people or the environment. The HSE Expert will act as the Principal Contractor’s HSE representative on site, supporting and verifying that Contractors discharge their own HSE responsibilities. The role focuses on monitoring and influencing safe working practices throughout the construction of work scopes at the onshore landfall area of the project, without taking over operational control of Contractor activities.

HSE Expert Landfall - Principal Contractor

Senior Site Safety & Health Specialist - T&D Projects Role: Travel Based  Overview EarthStream is seeking an experienced Senior Site Safety & Health Specialist to lead the implementation and management of safety programs across Transmission & Distribution (T&D) construction projects. This role is critical in ensuring all field operations are executed safely, in full compliance with regulatory requirements, and aligned with EarthStream’s commitment to a zero-incident safety culture. The successful candidate will act as the key safety advisor to project leadership within a heavy construction environment. Key Responsibilities<ul><li>Lead and implement project-specific Safety & Health (S&H) programs across T&D construction sites</li><li>Provide expert safety leadership to project management teams, subcontractors, and field personnel</li><li>Ensure full compliance with: <ul><li>OSHA regulations (local, state, and federal)</li><li>Industry standards (ANSI, NIOSH, NEC, and other applicable frameworks)</li></ul></li><li>Drive a zero-incident safety culture through proactive planning, monitoring, and continuous improvement</li><li>Conduct regular: <ul><li>Site safety inspections and audits</li><li>Performance reviews and compliance assessments</li><li>Hazard identification and risk mitigation activities</li></ul></li><li>Identify and resolve safety issues that could result in immediate danger to life or health, including initiating and managing work stoppages when required</li><li>Collaborate with project teams to: <ul><li>Investigate incidents, near misses, and environmental events</li><li>Develop corrective and preventative action plans</li><li>Prevent reoccurrence of safety issues</li></ul></li><li>Partner closely with: <ul><li>Client safety teams</li><li>Subcontractor safety representatives</li><li>Field supervision teams to ensure alignment and effective communication on all safety matters</li></ul></li><li>Lead site safety meetings, training sessions, and toolbox talks relevant to T&D construction activities</li><li>Conduct and manage comprehensive site safety walkdowns, ensuring timely resolution of identified issues</li><li>Maintain accurate and audit-ready safety documentation, including: <ul><li>Daily safety reports</li><li>Incident logs and investigation reports</li><li>Compliance records and training documentation</li></ul></li><li>Support site leadership by preparing communications that reinforce: <ul><li>Safety awareness</li><li>Project safety goals</li><li>Best practices across all phases of T&D construction</li></ul></li><li>Provide regular reporting and feedback to corporate safety leadership on project performance, risks, and improvements</li><li>Travel between project sites as required</li><li>Ensure compliance with all EarthStream policies and procedures</li></ul>Requirements<ul><li>One of the following: <ul><li>Bachelor’s Degree in Occupational Health & Safety, Engineering, or Construction Management 7 years of experience</li><li>Associate Degree 9 years of experience</li><li>High School Diploma/GED 11 years of relevant experience</li></ul></li><li>Proven experience working on Transmission & Distribution (T&D) construction projects (essential)</li><li>Strong understanding of high-risk activities associated with T&D infrastructure (e.g., transmission lines, substations, high-voltage systems)</li><li>In-depth knowledge & certification of: OSHA Construction & General Industry Standard & ANSI, NIOSH, NEC, and related safety regulations</li><li>Excellent leadership, communication, and stakeholder management skills</li><li>Ability to influence safety culture across multi-contractor project environments</li><li>Proficiency in Microsoft Office (Word, Excel, PowerPoint)</li><li>Willingness to work flexible schedules aligned with site operations</li><li>Valid driver’s license and ability to meet company driving requirements</li></ul>

Senior Site Safety & Health Specialist - T&D

Transmission & Distribution Superintendent Contract Type: 12-month contract (Temp-to-Perm opportunity) Role: Travel Based  Overview: EarthStream is seeking a highly experienced Transmission & Distribution Superintendent to oversee field operations on assigned projects. This role is responsible for ensuring the safe, timely, and profitable delivery of construction activities, while maintaining high standards of quality, safety, and efficiency. The successful candidate will plan, coordinate, and supervise all T&D-related construction activities, ensuring that subcontractors meet contractual obligations and project milestones. Key Responsibilities <ul><li>Oversee field operations across T&D projects, ensuring safe and efficient execution</li><li>Supervise construction activities including:<ul><li>High-voltage transmission lines</li><li>Steel and wood transmission structures</li><li>Drilled piers and spread footings</li><li>Grounding systems and environmental compliance</li><li>Substation equipment, structures, electrical systems, and controls</li></ul></li></ul><ul><li>Manage overall site construction activities, including:<ul><li>Safety compliance and performance</li><li>Workforce productivity</li><li>Materials and equipment utilisation</li><li>Scheduling and coordination</li><li>Engineering and contractual deliverables</li></ul></li></ul><ul><li>Coordinate and manage subcontractors, ensuring adherence to project scope, schedule, and safety standards</li><li>Build and maintain strong relationships with clients, engineers, subcontractors, and key stakeholders</li><li>Collaborate with project management teams to implement procedures, standards, and project documentation</li><li>Review and approve:<ul><li>Purchase requisitions</li><li>Field design change requests</li><li>Construction documentation (under guidance of Project/Construction Manager</li></ul></li></ul><ul><li>Manage quality and compliance through:<ul><li>Verification of materials and proper storage</li><li>Coordination with QA/QC to ensure welder qualifications</li><li>Inspection of equipment installation and alignment</li><li>System walkdowns and testing (including hydrostatic where applicable)</li></ul></li></ul><ul><li>Ensure correct drawing revisions are used onsite and all scope changes are properly executed</li><li>Supervise craft teams and support workforce planning as required</li><li>Manage site materials, tools, and logistics</li><li>Maintain full responsibility for day-to-day construction delivery in line with EarthStream policies, procedures, and standards</li><li>Read and interpret technical documentation, including:<ul><li>Isometric drawings</li><li>Structural drawings</li><li>P&IDs</li></ul></li></ul>Requirements <ul><li>One of the following:<ul><li>Bachelor’s Degree 7 years of T&D construction or craft supervision experience</li><li>Associate Degree 9 years of relevant experience</li><li>High School Diploma/GED 11 years of relevant experience</li></ul></li><li>Proven experience in transmission & distribution construction projects</li><li>Strong leadership, organisational, and communication skills</li><li>Demonstrated commitment to safety and compliance</li><li>Valid driver’s license and ability to meet company driving requirements</li></ul>

Transmission & Distribution Superintendent

Transmission & Distribution Superintendent Contract Type: 12-month contract (Temp-to-Perm opportunity) Role: Travel Based  Overview: EarthStream is seeking a highly experienced Transmission & Distribution Superintendent to oversee field operations on assigned projects. This role is responsible for ensuring the safe, timely, and profitable delivery of construction activities, while maintaining high standards of quality, safety, and efficiency. The successful candidate will plan, coordinate, and supervise all T&D-related construction activities, ensuring that subcontractors meet contractual obligations and project milestones. Key Responsibilities<ul><li>Oversee field operations across T&D projects, ensuring safe and efficient execution</li><li>Supervise construction activities including: <ul><li>High-voltage transmission lines</li><li>Steel and wood transmission structures</li><li>Drilled piers and spread footings</li><li>Grounding systems and environmental compliance</li><li>Substation equipment, structures, electrical systems, and controls</li></ul></li></ul><ul><li>Manage overall site construction activities, including: <ul><li>Safety compliance and performance</li><li>Workforce productivity</li><li>Materials and equipment utilisation</li><li>Scheduling and coordination</li><li>Engineering and contractual deliverables</li></ul></li></ul><ul><li>Coordinate and manage subcontractors, ensuring adherence to project scope, schedule, and safety standards</li><li>Build and maintain strong relationships with clients, engineers, subcontractors, and key stakeholders</li><li>Collaborate with project management teams to implement procedures, standards, and project documentation</li><li>Review and approve: <ul><li>Purchase requisitions</li><li>Field design change requests</li><li>Construction documentation (under guidance of Project/Construction Manager</li></ul></li></ul><ul><li>Manage quality and compliance through: <ul><li>Verification of materials and proper storage</li><li>Coordination with QA/QC to ensure welder qualifications</li><li>Inspection of equipment installation and alignment</li><li>System walkdowns and testing (including hydrostatic where applicable)</li></ul></li></ul><ul><li>Ensure correct drawing revisions are used onsite and all scope changes are properly executed</li><li>Supervise craft teams and support workforce planning as required</li><li>Manage site materials, tools, and logistics</li><li>Maintain full responsibility for day-to-day construction delivery in line with EarthStream policies, procedures, and standards</li><li>Read and interpret technical documentation, including: <ul><li>Isometric drawings</li><li>Structural drawings</li><li>P&IDs</li></ul></li></ul>Requirements<ul><li>One of the following: <ul><li>Bachelor’s Degree 7 years of T&D construction or craft supervision experience</li><li>Associate Degree 9 years of relevant experience</li><li>High School Diploma/GED 11 years of relevant experience</li></ul></li><li>Proven experience in transmission & distribution construction projects</li><li>Strong leadership, organisational, and communication skills</li><li>Demonstrated commitment to safety and compliance</li><li>Valid driver’s license and ability to meet company driving requirements</li></ul>

Scada Engineer Location: Necton, Norwich Duration: 01/07/2026 to 31/07/2028 Rotation: Monday – Friday, 8 hours a day Type: Freelance outside IR35 Description: Proven SCADA Commissioning Engineer in a HV substation/Offshore wind farm environment. Key Qualifications Client witness/support the delivery of the HV/Substation and WTG SCADA systems during the construction and commissioning phase of the project supporting Onshore and/or Offshore systems. This will cover the hardware and software interfaces for the whole project, from HVDC systems to WTGs, which cover: <ul><li>LAN systems (Process, Scada, Server, Subsystem, Client, Operator, DMZ)</li><li>Pole Control systems</li><li>Converter control system</li><li>DC protection</li><li>DC Measuring system</li><li>AC protection</li><li>Bay control units</li><li>HMI and fault reporting operation (design already finalised)</li><li>Communication/LAN systems</li><li>OT cyber security</li><li>Systems such as fire alarm, PECG, Cooling system etc.</li><li>Fibre Optic and other cable communication infrastructure – between onshore and offshore – overseeing installation of the cable, including hygiene, patching and correct install.</li></ul>• Client witness/support for acceptance tests (FAT/SAT) to ensure they are performed to specification, provide required functionality and are documented correctly. • Support investigations and report on HV Network and Ancillary system events during the commissioning phase. • Provide SCADA/control system technical support to the wider Commissioning team and project organisation. • Possible “hands-on” activities involved with testing and commissioning activities supporting the contractor with the various interfaces between contractors and client • Support the Engineering Team with issues relating to the Design Process. • Support the Operations team with troubleshooting , training and/or maintaining associated systems as may be required. DELIVERABLES • Accurate weekly reporting and record keeping on progress and issues to the Commissioning Package Manager. • Maintain a commissioning file. • Working very closely with the client Scada engineering team to ensure the installation matches the design. • Oversee the SATs of equipment especially with regard to remaining OSS panels. • Involved with the development, setup and operation of the Vanguard project from the Grimsby Control Room, GY and Necton. • Working with the Contractor and oversee their execution of works, challenging the progress and quality of works where necessary. • Responsible for troubleshooting relevant systems in the event of failures and coordinating the involvement of stakeholders and suppliers as/when required. • Liaise with Engineering and Quality Departments to ensure outstanding Engineering/Quality Issues are resolved. • Interface with the various packages which interface with Scada. • Responsible for ensuring accurate ‘As Built’ Drawings and Commissioning Records are kept by the Subcontractor. Must have Qualification / Experience • Relevant technical or engineering education, degree/HNC or equivalent. • IOSH/NEBOSH Certification. • All certificates required to work within/on Wind Turbines and Offshore are required - GWO Working at Height/Advanced Rescue, Enhanced First Aid, Sea Survival, Fire Awareness and Manual Handling. • Experience in HV/WTG/Auxiliary SCADA systems and associated infrastructure. • Experience of industrial control systems, automation, PLC’s, RTU’s and IED’s. • Experience in Industrial Communication Protocols (i.e. OPC-family, IEC-104, MMS, IEC61850, Modbus, Profibus). • Knowledge of communication and Monitoring systems used within Offshore wind farms (Tetra, VHF, 4/5G, IP Telephony, CCTV, ICCP, CMS, DTS and Fire Alarm/Extinguishing Systems). • Proven track record in a Client role. • Self-starting with excellent planning/coordination and problem solving abilities. • Fluent written and verbal English with good communication skills."

SCADA Engineer

PMO Manager Location: London, Blackfriars Rotation: Monday-Friday, 40 hours Type: Freelance, outside IR35 Project: Vanguard Description: Department: Construction Project Management Services, Project Assurance OTC-PP Location: London Office The clients Offshore Wind pools the renewable energy expertise and interests in offshore wind energy of the client group. Reporting to the Project Lead / Project Director, the PMO (Project Management Office) Manager shall have the capability and experience to manage a team, processes and systems for a large multi-billion-Euro project. Line reporting line is to the Regional PMO Lead. The Role & Responsibilities: The PMO (Project Management Office) Manager is integral to the project organization, where the PMO Manager is part of the Senior Management Team (SMT) and consults the Project Leadership Team (PLT) in resource allocation, governance, and delivery across project life-cycle phases (from Early-Stage Development to Construction). He/she will establish and maintain robust governance structures, ensure alignment with project scope, and drive efficient execution while monitoring key performance indicators (KPIs) to address deviations proactively. Within the project, the candidate will manage functional teams which include project administrators, PMO analysts, document controllers and planners and will also be expected to manage some other functional areas like change control, project assurance, resource management and reporting, as well as relevant interfaces with risk management and cost controlling and interface management. In addition, the PMO Manager will support the line function in the further development and implementation of processes and governance activities required across the project portfolio. The role includes a wide range of responsibilities, some of which are listed below: • Promote Health, Safety, Wellbeing & Environmental good practices. • Develop and implement a tailored controls framework in alignment with client standards, incorporating project-specific governance to support life-cycle phases. • Lead the establishment of project governance, processes, and systems; conduct internal quality assurance, monitoring, and audits to maintain high standards and facilitate continuous improvement across the portfolio. • Roll out processes and systems to the wider project team, delivering training and awareness sessions to ensure adoption and effective utilization.. • Drive Knowledge Sharing through the Lessons Learned process and related tool. • Manage and support the PMO team (including PMO analysts, document controllers, planners, and administrators) in daily operations, fostering team development, mentoring members, and positioning the PMO as a workstream within the project organization. • Coordinate with other control functions (e.g., risk management, cost control, interface management etc.) to integrate activities, including risk assessments, mitigation strategies, and interface management between technical packages. • Oversee the development of project delivery schedules, reporting tools, progress tracking, and management interfaces, ensuring alignment with strategic objectives and budget constraints. • Lead the Document Controls team to meet project document management needs, maintaining an effective Electronic Document Management System (EDMS). • Implement and oversee change control processes across all functions, ensuring dual responsibility in decision-making under the PLT. • Develop, implement and oversee project specific Dashboards with the aim of ensuring a strong performance management visibility. • Manage project resource recruitment, allocation, and tracking in line with scope parameters, actively reporting on status and optimizing for lean resourcing. • Prepare weekly, monthly and ad hoc reporting according to the project needs • Ensure the project has a strong operating system with possible Joint Venture partners in terms of interfaces, reporting etc. • Partner with other offshore wind projects in the client portfolio to standardize controls frameworks, share best practices, and drive continuous improvements in governance and efficiency. • Support and challenge the PMO team members to establish themselves and their roles in the team and be an ambassador for the PMO in the wider project organization. • Leading project related assurance reviews and the implementation of improvements. Knowledge and Skills: • Successful completion of a degree in engineering, project management or similar. • Professional Project Management qualification (such as APM PMQ, PMI) is an advantage. • Previous experience as being a PMO Manager with experience in cost management, planning & scheduling, cost and schedule risk analysis, change control, information management and project assurance. • Proven experience in the offshore wind sector or large-scale construction projects is highly desirable. • It would be advantageous if the candidate has experience using tools such as Primavera P6, Primavera Risk Analysis and an EDMS. • Strong IT skills, including advanced proficiency in Microsoft Office (Excel, Word, PowerPoint), experience with Power BI is an advantage. • Excellent time management abilities, with skills in planning, organizing, and prioritizing tasks effectively. • Ability to identify a problem or conflict, identify potential solutions and analyse the solutions leading to a recommendation for the optimal solution. • Proactive, self-motivated approach with exceptional leadership, interpersonal, and team-building skills. • Demonstrated ability to lead and collaborate within high-performing, diverse, multidisciplinary teams. • Excellent communication skills both written and verbal (English)

PMO Manager

HSE Advisor – medior (283584) Duration: 15 June 2026 – 30 November 2026 Location: Barrow-In-Furness Monday to Friday Inside IR35 Travel Required Candidate must bring own PPE May be required to travel to Grimsby Description: The OPS QHSE advisor has daily reference to the OPS QHSE Manager or Head of Site to support client Offshore OPS in managing QHSE risks. The OPS QHSE Advisor is responsible for providing independent, expert, and professional advice and guidance to site management on all health and safety issues, actively participates in and promotes a high standard of health, safety, and environmental awareness and culture at the wind farm. Maintain an understanding of the Offshore asset integrity management policy and strategy and relevant responsibilities of the job. Success Criteria/KPIs <ul><li>OPS QHSE managers and Site Manager at relevant Operational sites in CE and UK, are supported as needed</li><li>Strong cooperation and LL sharing with other QHSE advisors across different regions</li><li>Support client and/or Regional QHSE Targets</li><li>Individual success criteria and KPIs are to be found in individual PDD documents</li></ul>Key Responsibilities/Task/Deliverables <ul><li>In client IMS, review and contribute to updating existing site-specific processes, procedures and instructions according to requirements and scope of work</li><li>Support a site culture of using and maintaining relevant processes, procedures and instructions client IMS</li><li>Update client Incident reporting tool:</li><li>Enter and follow up on cases or support/train local responsible people in being able to do this</li><li>Perform first line quality check on cases</li><li>Conduct investigations when necessary</li><li>Give feedback on the status of cases to technicians or other relevant local stakeholders</li><li>Create a good culture around Incident reporting through leading by example, knowledge sharing, and lessons learned</li><li>Support the site with legal compliance through use of RedOnline and promoting awareness of legal requirements on site</li><li>Execute the legal monthly compliance check with RedOnline and prepare action plans</li><li>Contribute to the site compliance standards that client OF holds</li><li>Support the site with Quality tasks e.g. inspections and initiatives as defined with the QHSE organisation</li><li>QHSE activities in accordance with the site QHSE activity plan both on- and offshore (offshore rotation if required)</li><li>Engage with QHSE back-office to provide input the global QHSE plan and strategy</li><li>Safety inspections, incident investigation and root cause analysis (vessel, SOV, CTV, turbines, OSS, HUB-facilities, Helicopter facilities etc.)</li><li>Documentation of safety inspections</li><li>Support (plan, execute and follow up) in executions of emergency exercises and Emergency Response Plan</li><li>Review and update activity plan according to requirements, scope and KPI’s</li><li>Support QHSE culture projects as needed</li><li>Roll-out and follow-up of all QHSE-related campaigns both onshore and on vessels ()</li><li>As relevant, participate in kick-offs on vessels for service campaigns</li><li>Support site (Q)HSE meetings</li><li>Participate and support toolbox talks, back to work briefing and end of shift meeting</li><li>Participate and contribute to all relevant site (Q)HSE meetings</li><li>Contribute towards Board governance reporting on QHSE</li></ul> <ul><li>Contribute to QHSE meetings both external and internal</li><li>Participate in audits (internal and external)</li><li>Follow up on findings from QHSE related audits and support implementation of NCR’s</li><li>Support site management in reporting to authorities as needed (e.g., BSH, Gewerbeaufsicht, BG, HSE)</li><li>Additional tasks</li><li>Reporting LTIs to HSE organisation in accordance with the process</li><li>Ad hoc advise on questions regarding QHSE in daily work (e.g. management, technicians, internal and external)</li><li>Observe execution of additional/special tasks (retrofits, main component exchange, etc.)</li><li>Ensure the validity of own safety certificates: Global Wind Organisations Standard Basic Safety Training (BST) etc.</li><li>Be proactive in maintaining competence level required for the role</li></ul> Full GWO certification, HUET, OGUK medical and Chester Step test with a score of 35 or above. An expectation to be able to travel offshore via CTV or Helicopter Essential <ul><li>QHSE related qualifications in accordance with national requirements</li><li>QHSE Experience in related offshore industry</li><li>Administrative skills</li><li>Good communication and presentation skills</li><li>IT literate (Microsoft office package)</li></ul>Desirable <ul><li>Qualified auditor</li><li>Qualified Investigator</li><li>Experience with Quality management</li><li>Experience with Environmental management</li><li>Advanced: First Aid, Work and Rescue at Height and Confined Space entry/rescue</li></ul> Competence <ul><li>Strong interpersonal skills and ability to communicate with stakeholders at different organizational levels</li><li>The job holder will be expected to reach the estimated competence levels fit for the relevant career path and seniority as laid out in client competency model.</li><li>If some tasks possess the highest direct risk to Operations within the areas of Legal, People, Environment, Asset and Reputation, these will be defined separately.</li><li>Other types of competences will be managed by the Learning and Development department and your manager going forward.</li></ul>

HSE Advisor

Summary The lead Control & Protection System Application Engineer is responsible for the requirement definition, design, studies, validation, and commissioning of Control & Protection Systems for VSC based HVDC transmission schemes, including MMC converter technology. This role provides technical leadership across the full project lifecycle, ensuring compliance with applicable standards and delivering reliable, safe, and high-performance HVDC systems.   Roles and Responsibilities   <ol><li> Technical Leadership</li></ol><ul><li>Oversee the overall technical solution, ensuring customer requirements are met based on reference solutions.</li><li>Lead requirements gathering, system design, implementation, and development of HVDC Control & Protection systems.</li><li>Lead the HVDC control and protection system design for LCC and/or VSC HVDC schemes.</li><li>Act as the technical authority for controls and protection within the project team.</li><li>Review and approve technical documents, including control/protection settings, control philosophies, protection logic, and system architecture, test plans, and test procedures.</li><li>Serve as the primary customer interface for technical discussions, training, and requirement clarification.</li></ul>  <ol><li> Control System & Protection Design</li></ol><ul><li>Define control philosophies, protection and interlocking logics, and data exchange configurations.</li><li>Lead and participate in engineering design processes, including design reviews and approval cycles.</li><li>Ensure that all design outputs comply with industry standards, system requirements, and quality procedures.</li></ul>  <ol><li>Advanced Modelling & Simulation</li></ol><ul><li>Conduct Electromagnetic Transient (EMT) studies using PSCAD, EMTP-RV, and model control/protection functions in MATLAB/Simulink.</li><li>Perform network conversion, modelling, tuning, and verification using PSSE, PSCAD, MATLAB and RSCAD.</li><li>Develop full plant/system models and lead end-to-end validation across multiple simulation platforms.</li><li>Lead Control System Studies & Testing, including:</li></ul>o Software-in-the-Loop (SIL) o Dynamic performance studies o Protection coordination o Overall system integration   <ol><li>System Testing & Commissioning</li></ol><ul><li>Conduct Integration System Test (IST), Functional System Test (FST), Factory Acceptance Tests (FAT), Site Acceptance Tests (SAT), and system commissioning at customer sites.</li><li>Lead root cause analysis and troubleshooting of complex VSC control and protection issues.</li></ul>  <ol><li> Process Improvement & Operational Excellence</li></ol><ul><li>Identify and implement improvements in engineering tools, processes, systems, and technical solutions to enhance customer value and operational efficiency.</li><li>Make informed decisions regarding work processes, schedules, priorities, and operational plans to achieve departmental objectives.</li><li>Uphold and promote SQDC principles across teams.</li></ul>  Required Qualifications & Skills <ul><li>Education: Degree in Electronics/Electrical Engineering or equivalent proven experience in HVDC systems.</li><li>Experience: Minimum 7 years in HVDC control and protection system design.</li><li>Technical Expertise:</li><li>HVDC Control, Protection, and Sequencing strategies.</li><li>Dynamic performance studies and system modelling for VSC-HVDC schemes.</li><li>Proficiency in PSCAD and MATLAB/Simulink.</li></ul>

Lead Control & Protection System Application Engineer

Summary <ul><li>As part of the V and V Test Automation Engineering team, the Automation test engineer will work with a highly motivated, and dynamic team of engineers on the delivery and automation of existing and new power electronics application requirements for power systems, particularly for HVDC converters and the forthcoming “HVDC Grid”.</li><li>The development of scripts is technically challenging and involves a variety of engineering disciplines, contribution through teamwork, clear communication with the software and validation departments of the project and an innovative approach.</li><li> </li></ul>Essential responsibilities: <ul><li>Design and develop testing framework.</li><li>Test automation planning.</li><li>Develop test scripts according to company defined standards.</li><li>Support create and enhance in-house tools.</li><li>Execution of automated tests for different aspects such as PSCAD and MATLAB.</li><li>Clearly communicate details of failures to the respective engineering functions.</li><li>Carry out execution of tests and provide clear reporting of results.</li><li>Seek to automate testing wherever possible using out automatic testing platform.</li><li>Support continual improvement, raising the effectiveness and efficiency of the team through the introduction of tools, methods, and process improvements.</li></ul>  Qualifications and requirements: <ul><li>Engineering degree or equivalent including power systems and power electronics subjects or proven equivalent knowledge and experience in embedded system testing.</li><li>Moderate experience in the automation test across any industry.</li><li>Experience of working with test frameworks involved in testing of embedded systems.</li><li>Strong communication skills with a fluency in English language.</li><li>Willingness to travel to support projects globally and readiness for flexible with working hours</li></ul>  Desired characteristics <ul><li>Strong knowledge of python programming.</li><li>Good understanding of how scripts interact with the software environment.</li><li>Specification & report writing such as technical note.</li><li>Flexible work approach.</li><li>Eager to learn.</li><li>Strong problem-solving skills.</li><li>Good communication skills.</li><li>Accountable for delivery.</li><li>Proactive approach to solve issues.</li><li>Perfection seeking mindset.</li><li>Can deliver under tight schedule and pressure.</li><li>Attention to details.</li><li>Organised.</li><li>EHS compliance ability.</li></ul>

Automation Test Engineer

QHSE Offshore Medical Officer – Senior Duration: 13/7/2026 – 16/10/2026 Location: Rhode Island USA Rotation: 4/4 – 5/5 Description: Client information This client is a world leader in the highly specialised fields of dredging, solutions for the offshore energy market, infra marine and environmental works. With more than 140 years of experience and 5,200 highly skilled professionals, we bring tailor-made solutions, innovation and new technologies to our customers’ projects, ensuring that they are performed safely, efficiently and cost-effectively. Department Description and Responsibilities As an Offshore Medic, you will play a key role as part of the on-site team assigned to one of our offshore projects worldwide. In this role, you will be responsible for overseeing, maintaining, and controlling all medical practices onboard, ensuring they meet company and international standards. Your duties will include providing direct medical care to personnel, managing medical facilities and supplies, and conducting regular inspections of activities and equipment to verify their compliance with health and safety requirements. You will also ensure the proper implementation of medical procedures, support emergency response preparedness, and contribute to promoting a safe and healthy working environment for all offshore staff. Primary Tasks and Responsibilities - Provide medical care to offshore personnel, including emergency response, occupational health treatments, and accurate documentation of all cases. - Maintain and operate the offshore medical facilities, ensuring readiness, functionality, and availability of sufficient medical supplies and equipment. - Ensure proper documentation and filing of medical reports, compile statistics, and provide analysis and reports as required. - Oversee occupational health and hygiene programs, including health surveillance, fitness-to-work monitoring, and workplace environment assessments. - Assist in planning and conducting emergency drills and training exercises, evaluate medical preparedness, and recommend improvements. - Actively participate in safety meetings and toolbox talks, providing medical and health-related input where relevant. - Support incident investigations from a medical perspective, ensuring findings and corrective actions are documented and followed-up. - Carry out medical inspections onboard, ensuring compliance with health standards, proper reporting, and effective follow-up. Technical profile requirements - 5 years’ experience as Offshore Medic in high-risk industries. - Good knowledge & experience with MS Office. - Experience with Offshore Wind operations is a plus. - Willingness to travel abroad on 4:4 or 5:5 rotation. - Fit for Offshore work. Non-Technical profile requirements - Pragmatic, proactive and forward-thinking. - Team player, excellent communication skills, tactful. - Service-oriented and problem-solving attitude. - Critical and analytical thinking. - Accurate, efficient in organising your work. Job-specific certification requirements - HSE Offshore Medic (or similar). - Licensed Medic. - NEBOSH IDIP/Certificate or similar (through experience) is a plus. Offshore-specific certifications requirements -Full GWO -Offshore Medical. -Helicopter Underwater Escape Techniques (HUET) CA-EBS. -Chester Step Test (or similar) -Bi-deltoid measurement VISA requirements - US B1 OCS WIND VISA (!!) Language proficiencies - Fluent proficiency in English is required (written and spoken). - Proficiency in other languages is a plus

QHSE Offshore Medical Officer

US - Protection Engineer Location: Rhode Island, USA Duration: 15-Jun-2026 - 31-Dec-2026 Business Unit: Engineering Rotation: 21 days on / 21 days off Project: Sunrise Wind Farm Description We're looking for a consultant of protection engineer or protection test engineer to be onsite at SRW01 offshore in US. S/he would be in 21/21 rotation scheme and to work closely with our protection lead (protection system engineer) in the project. Requirements: - Preferably HVDC protection engineer - Preferably has great knowledge about Siemens HVDC equipment - Must have a minimum of 1 year experience at offshore site OR a minimum of 3 years experience at onsite substation. - Has GWO valid certificate.

Protection Engineer

Senior Onshore Civils Engineer Duration: 15/05/2026 to 14/05/2027 (ASAP) Project: Dogger Bank South AYM Type: Freelance Base location: London, Swindon or Coventry Travel: Expensed back outside of base location The Senior Onshore Civils Project Engineer will play a key role in defining the optimal solution for the onshore infrastructure associated with the project. The role will include the Landfall, onshore cable route, and the onshore substation. The successful candidate will have strong project management skills and knowledge of the onshore civil works which are required for the development and operations of an offshore wind farm. Experience working in offshore wind is not essential, though this would be an advantage, and transferable skills from a related industry would be necessary. Your key tasks and responsibilities: As a Senior Project Engineer for Onshore Civils your primary responsibilities will be to: Thrive as part of a multi-disciplinary team of technical specialists supporting all stages of the offshore wind farm Support the site selection and design activities through the consent phase Manage the civil engineering activities and design contract during the FEED and Detailed Design stages, and then continue supporting the project on into construction Ensure alignment with the CDM and company policies Support Offshore Operations in driving the lifecycle implementation strategy for the installed works Manage and implement onshore site investigation works Deliver specialist engineering knowledge for onshore cable routing and crossing design (with particular emphasis on trenchless methods) Support with technical input to landowner negotiations Mentor and develop junior and associate colleagues within the team Support preparing the employer’s requirements and technical specifications through the tender process with technical input to programme development Participate in the procurement activities associated with onshore civil works in the project Provide financial estimates for the project cost book based on your experience from similar schemes and extrapolations from prior projects Management of sub-consultants, ensuring that safety in design is appropriately accounted for in the designs and that quality requirements are met Work closely across all interfaces with; internal stakeholders, external design houses and Contractors to produce cost-effective and value-added solutions Ensure that all lessons learned from the completed works are incorporated into future projects. Essential skill requirements: Educated to degree level in civil or structural engineering or equivalent experience Have a successful track record in the delivery of onshore civil works within the power industry Project management experience in the offshore industry from either design, construction, or operations Strong appreciation for CDM Regulations, safe systems of work and Environmental requirements Excellent communication and negotiation skills, able to communicate effectively within a team The capability to work within a team and to manage competing demands from the project Strong coordination and leadership skills; highly motivated; confident and resourceful The drive and motivation to meet the time, cost and quality targets Desirable skills: Member of professional engineering body Understand the process of developing and constructing the onshore portion of an offshore wind farm A proven track record in civil engineering development and installation of an Onshore HV electrical system and a HV substation Deep understanding of onshore civil design across the entire project lifecycle from pre-FEED to detailed design Understanding and ability to communicate with other engineering disciplines Understand the range of available civil engineering methodologies, including cable placement/HDD, with a practical approach to implementation Ability to carry out/ participate in risk management and optioneering to obtain the most favourable outcomes/ solutions Development of EPC-type technical contracts from a Client perspective Desirable skills: Key Qualifications: <ul><li>Degree/diploma in Civil, Structural/mechanical Engineer</li></ul>

Senior Onshore Civils Engineer

10 x BAL02 OSS: Offshore Electrical Inst. & Comm. Supervisor  Project Name: BAL02 OSS Duration: 01-Nov-2026 - 30-Apr-2027 Business Unit: Engineering Rotations: 14days/14 days – 12 hours a day Type: Freelance     Description: Role Objective Guide management and liaise with back-office engineers, creating a clear insight into progress, risks, quality, and safety on site. Motivate progress and a safe work culture, through contractor engagement, coordination, and collaboration. Responsibilities It is the Offshore Electrical Installation & Commissioning Supervisor’s responsibility to facilitate constructive and fact-based communication between activities at site, Offshore Electrical Installation & Commissioning Management, and back-office functions within the project. Through honest observation-based feedback on progress and quality, enabling, especially the Offshore Electrical Installation & Commissioning Manager, to conduct solid risk assessments, present realistic forecasts to project management, and prepare for a smooth handover to Generation. While on site the Offshore Electrical Installation & Commissioning Supervisor is a role model for safe behaviour, inspiring contractors, sub-contractors, and site visitors to always think safety before quality and progress. Furthermore, the Offshore Electrical Installation & Commissioning Supervisor shall engage with the contractors and working party foremen to understand and obtain knowledge of issues related to quality and progress, collaborating with them to identify suitable mitigations, and finally reporting findings and contractors’ proposed mitigations to Offshore Electrical Installation & Commissioning Management. Tasks • Facilitate alignment meetings with respectively back-office engineers and on-site contractor team leads – enabling collaboration through open communication on quality, progress, and safety. • Update Electrical Installation & Commissioning Management on system specific progress, risks, and quality – providing observation-based input to scope related progress and risks. • Review contractor ITP and test procedures, and witness all test phases (FAT, SAT, SIT, OSAT, and OSIT) based on the Critical to Functionality (CtF) and Critical to Quality (CtQ) guidelines from the functional line department and project specific assessment. • Supervise delivery of equipment, ensuring that all damages and missing equipment is recorded and addressed to the contactor. This includes familiarisation with shipping lists and reviewing equipment unloading Risk Assessment & Method Statements (RAMS) • Supervise the contractors handling and installation of equipment during the outfitting and electrical installation, including pulling and termination of cables focusing on CtF and CtQ. • On projects with multiple contractors directly reporting to client on site, coordinate the on-site cross contractor interfaces and collaboration. • Supervise qualification (mechanical completion) of the installed equipment and cables (high voltage, low voltage, and communication cables). • Execute Low Voltage and High Voltage Authorised Person (LV AP and HV AP) scope, involving establishing and maintaining electrical safety, lock out/tag out, and energisation checks. • Support the PICOS, including substituting, in all matters related to safe substation management, including inductions, daily coordination, and safety drills. • Execute inspections and tests relevant for the Test After Completion prior to asset handover to Generation. • Provide lessons learned and improvement proposals, based on NCR’s, punches, and through using the processes and procedures supplied by the functional line department, enabling a continuous development of clients contracts and the standard processes and procedures, ensuring clients and the Electrical Installation & Commissioning Supervisor role always keep up with contemporary needs. • Take location and task-based safety training (e.g. Global Wind Organisation (GWO) training, and local supervisor safety certifications), observe and intervene on site based on safety on site, and report to the clients QHSE representative on site. Deliverables Completed Commissioning Document Register (CDR). [reported to the Offshore Electrical Installation & Commissioning Manager] Record system progress and provide daily input to the Daily Progress Report (DPR) using Lautec.[visualised through EnSync] Minutes of Meeting from regular alignment meetings with respectively back-office engineers and site-based contractors. [stored within project document management system] Rectified and closed out punches for all electrical and electromechanical systems. [recorded in Aconex Field] Recorded lessons learned and improvement proposals within. Synergi [responsible and actions defined in the Synergi cases] Inform about HSE related observation [observation cards or app, viewable by site HSE representative] Decision Authority Through witnessing of installation and test, the Onshore Electrical Installation and Commissioning Supervisor has the authority to accept or reject completion of test and commissioning, based on the contractual requirements and the project mandated requirements and acceptance criteria. The Consultant must bring his/her own Iphone. External consultants’ equipment such as PCs, mobile phones and iPads must always be up-to-date with the latest iOS release. The owner must allow clients AirWatch security and management software for iPhones and iPads to be installed. The app is mandatory on all mobile devices used by client staff (including External consultants) to protect them from cybercrime. The owner must grant approval for client to remove apps, data and access from privately owned equipment if it is deemed to pose a risk in relation to client security or the GDPR regulations, if the equipment is lost/stolen, or if the owner ceases to have an active contract with Magnit and/or client. When an external consultant leaves the client, they must contact the IT Service Desk to remove all client apps and data. The IT Service Desk can only support privately owned equipment in connection with clients AirWatch security and management software. Requirements: Qualification and Requirements • Possess a bachelor or higher educational degree within subject matter field of engineering. • Have recent experience and obtained competencies with installation, test, and commissioning of dynamic systems, equipment, components, and cables (i.e. high and low voltage electrical, electromechanical, mechanical, fluid, thermo, and multidiscipline dynamic systems) and control & communication systems, equipment, components, and cables (i.e. supervisory control & data acquisition, network, and telecommunication systems). • UKOG Medical Chester Step Test (minimum rating: above average). GWO training, following GWO Basic Safety Training Standard, GWO Enhanced First Aid Training Standard, GWO Control of Hazardous Energies Standard, and GWO High Voltage Standard. Polish Medical certificate Polish BHP training

Offshore Electrical & Installation Commissioning Supervisor

Job Title: Electrical Commissioning Manager Location: Kouvola, Finland Contract Type: Fixed-Term Contract (12 Months) Sector: Data Centre Construction Employer: General Contractor Reports To: Project Director / Commissioning Director Position Summary The Electrical Commissioning Manager will lead and manage all electrical commissioning activities for a large-scale data centre project in Kouvola, Finland. Acting on behalf of the General Contractor, the successful candidate will be responsible for the planning, coordination, execution, and successful delivery of electrical commissioning works from pre-commissioning through integrated systems testing and client handover. The role requires close collaboration with project management, construction teams, MEP subcontractors, equipment vendors, commissioning agents, and the client team to ensure all electrical systems are commissioned safely, efficiently, and in accordance with project specifications, industry standards, and programme requirements. Key Responsibilities Commissioning Leadership<ul><li>Develop and implement the project electrical commissioning strategy and execution plan. </li><li>Manage all electrical commissioning activities throughout the project lifecycle. </li><li>Coordinate commissioning activities with construction, quality, and project controls teams. </li><li>Ensure commissioning milestones align with the overall project schedule. </li><li>Lead commissioning meetings and provide regular progress updates to project leadership. </li></ul>Electrical Systems Management Oversee commissioning activities for: <ul><li>Medium Voltage (MV) distribution systems. </li><li>Low Voltage (LV) distribution systems. </li><li>Transformers. </li><li>Switchgear and switchboards. </li><li>UPS systems. </li><li>Static Transfer Switches (STS). </li><li>Standby generator systems. </li><li>Power monitoring and SCADA systems. </li><li>Earthing and lightning protection systems. </li><li>Electrical protection and control systems. </li><li>Fuel systems associated with backup power infrastructure. </li><li>Data hall power distribution systems. </li></ul>Planning & Documentation<ul><li>Review and approve commissioning procedures, method statements, test scripts, and commissioning schedules. </li><li>Ensure completion of pre-functional and functional testing documentation. </li><li>Maintain commissioning trackers, issue logs, and completion reports. </li><li>Review subcontractor commissioning documentation for compliance with project requirements. </li><li>Manage turnover documentation and handover packages. </li></ul>Stakeholder Coordination<ul><li>Interface with client commissioning teams and third-party commissioning agents. </li><li>Coordinate with MEP contractors, specialist vendors, utility providers, and authorities. </li><li>Facilitate integrated systems testing (IST) and witness testing activities. </li><li>Manage issue resolution and system deficiencies through to closure. </li></ul>Quality Assurance<ul><li>Ensure all commissioning activities are carried out in accordance with project specifications and approved procedures. </li><li>Verify compliance with relevant European, Finnish, and industry standards. </li><li>Support QA/QC inspections and system walkdowns. </li><li>Monitor commissioning readiness and system completion status. </li></ul>Health & Safety<ul><li>Promote and enforce a strong safety culture throughout all commissioning activities. </li><li>Ensure compliance with Finnish HSE regulations and project safety requirements. </li><li>Lead commissioning risk assessments and permit-to-work activities. </li><li>Participate in incident investigations and corrective action implementation where required. </li></ul>Reporting<ul><li>Produce weekly and monthly commissioning progress reports. </li><li>Track commissioning KPIs and milestone achievement. </li><li>Escalate programme risks and technical issues to senior management. </li><li>Provide accurate forecasting of commissioning resource requirements and completion dates. </li></ul>Candidate Requirements Essential Qualifications<ul><li>Degree or Diploma in Electrical Engineering or related discipline. </li><li>Minimum 10 years' experience in electrical construction and commissioning. </li><li>Minimum 5 years' experience in a commissioning leadership role on mission-critical facilities. </li><li>Demonstrated experience delivering electrical commissioning on large-scale data centre projects. </li><li>Strong understanding of commissioning methodologies and best practices. </li><li>Experience with integrated systems testing (IST). </li><li>Ability to read and interpret electrical drawings, schematics, and control philosophies. </li><li>Excellent stakeholder management and communication skills. </li><li>Fluent English language skills. </li></ul>Preferred Qualifications<ul><li>Previous experience working in Finland or the Nordic region. </li><li>Data centre commissioning experience exceeding 20MW critical load. </li><li>Knowledge of Finnish electrical regulations and European standards. </li><li>Commissioning certifications or relevant industry accreditations. </li><li>Experience with hyperscale data centre clients. </li></ul>Key Competencies<ul><li>Leadership and team management. </li><li>Programme and schedule management. </li><li>Technical problem solving. </li><li>Quality-focused approach. </li><li>Strong organisational skills. </li><li>Commercial awareness. </li><li>Ability to perform in a fast-paced construction environment. </li><li>Client-facing communication skills. </li></ul>Contract Details<ul><li>12-month fixed-term contract. </li><li>Site-based position in Kouvola, Finland. </li><li>Competitive day rate or monthly contract package. </li><li>Accommodation, travel allowance, and rotation arrangements subject to agreement. </li><li>Immediate or negotiated start date. </li></ul>Success Criteria The Electrical Commissioning Manager will be deemed successful when: <ul><li>Electrical systems are commissioned safely and without significant incidents. </li><li>Commissioning activities are completed in accordance with the project programme. </li><li>All electrical systems achieve successful integrated systems testing. </li><li>Client acceptance and handover milestones are achieved. </li><li>Commissioning documentation is completed to the required standard. </li><li>Project quality and operational readiness targets are met. </li></ul>

Electrical Commissioning Manager

Shift Supervisor  Vessel : TSV Aethra Project: Celtic Mob Date: approx. early of July Duration: approx. 6 weeks Position: Shift Supervisor Mob: Cork SoW: PLB trenching, survey   Required Certificates 1. Valid Medical Fitness Certificate OGUK or STCW 2. Valid Maritime Safety Training Certificate full GWO or Foet Bosiet

Shift Supervisor

Deputy Offshore Manager Vessel : TSV Argo Project: Celtic Mob Date: approx. mid of June Duration: approx. 3 weeks Position: DOM Mob: Cork SoW: PLB trenching, survey Required Certificates 1. Valid Medical Fitness Certificate OGUK or STCW 2. Valid Maritime Safety Training Certificate full GWO or FOET and BOSIET

Deputy Offshore Manager

Electrical QA/QC Engineer – Data Centre Project (Contract) – Denmark Location: Denmark (On-site) Contract Type: Freelance / Contract Duration: Long-term project Start Date: ASAP The Opportunity We are currently seeking an experienced Electrical QA/QC Engineer to join a major hyperscale data centre project in Denmark. This is a fantastic opportunity to work on a high-profile, technically complex project within a fast-growing, mission-critical sector. You will play a key role in ensuring all electrical installations meet the highest standards of quality, compliance, and performance throughout the project lifecycle. Key Responsibilities<ul><li>Implement and manage QA/QC procedures for all electrical works on site</li><li>Review and approve Inspection & Test Plans (ITPs) and method statements</li><li>Conduct site inspections, audits, and quality walkthroughs</li><li>Monitor installation activities to ensure compliance with project specifications, codes, and standards</li><li>Oversee testing & commissioning documentation (FAT, SAT, pre-commissioning)</li><li>Manage and track non-conformance reports (NCRs) and corrective actions</li><li>Liaise with subcontractors, consultants, and client representatives</li><li>Ensure accurate record keeping and QA documentation</li><li>Support project handover and close-out documentation</li></ul>Requirements<ul><li>Proven experience in Electrical QA/QC on data centre or mission-critical projects</li><li>Strong knowledge of electrical systems (LV/MV, UPS, switchgear, generators, etc.)</li><li>Familiarity with international standards (IEC, ISO, etc.)</li><li>Experience with commissioning processes in data centre environments</li><li>Ability to read and interpret technical drawings and specifications</li><li>Excellent communication and stakeholder management skills</li><li>Eligible to work in the EU / Denmark</li></ul>Desirable<ul><li>Previous experience on hyperscale data centre projects</li><li>Relevant electrical qualifications or engineering degree</li><li>Experience with major contractors or EPCs</li></ul>What’s on Offer<ul><li>Competitive day rate</li><li>Long-term contract on a high-profile project</li><li>Opportunity to work with a leading team in the data centre space</li><li>Exposure to cutting-edge, mission-critical infrastructure</li></ul>

Electrical QA/QC

Duration: 1 year Location: Sweden/Denmark/Italy/Germany Role Purpose The Mechanical QA/QC Lead for Europe will oversee all Quality Control activities across multiple project sites within the region. This role ensures that all construction, mechanical, electrical, and commissioning works meet the highest standards of quality, compliance, and client specifications. The successful candidate will act as the primary QC escalation point for European operations, driving consistency, standardisation, and continuous improvement in QC processes. Regional Leadership & Oversight <ul><li>Lead, support, and mentor QC teams across all European project locations.</li><li>Ensure consistent application of QC procedures, inspection processes, and documentation.</li><li>Provide leadership guidance on complex quality issues and NCR/Defect resolution.</li><li>Work closely with Regional Directors, Project Directors, and Quality/Engineering functions.</li></ul>  Quality Control Execution <ul><li>Oversee completion and approval of Inspection & Test Plans (ITPs), Method Statements, and quality checklists.</li><li>Ensure all QC activities are aligned with project specifications, statutory requirements, and client standards.</li><li>Conduct site audits, inspections, and quality walks across all active projects.</li><li>Verify materials, installations, and systems meet compliance and certification requirements.</li></ul>Standards, Processes & Governance <ul><li>Drive harmonisation and standardisation of QC procedures across all European sites.</li><li>Develop regional QC guidance documents, templates, and best-practice playbooks.</li><li>Implement lessons learned and quality improvement initiatives across teams.</li><li>Support internal and external audits, ensuring corrective actions are completed on time.</li></ul>   Quality Reporting & Performance Tracking <ul><li>Ensure accurate and timely QC reporting for each project.</li><li>Track KPIs including: NCR performance, defects, rework trends, audit findings, and close-out compliance.</li><li>Present monthly/quarterly QC updates to senior leadership.</li><li>Support quality related risk assessments and mitigation plans.</li></ul>Client & Stakeholder Liaison <ul><li>Act as regional QC representative for client meetings, audits, and inspections.</li><li>Support buildability reviews, design coordination, and technical workshops.</li><li>Provide early QC input during pre-construction and startup phases.</li></ul>Skills & Experience Required <ul><li>7 years’ experience in Quality Control or Quality Assurance within construction, data centres, MEP, or industrial projects.</li><li>Strong understanding of CSA, Mechanical and commissioning quality requirements.</li><li>Experience leading multi-site or multi country teams.</li><li>Excellent knowledge of inspection processes, ITPs, and QA/QC standards.</li><li>Strong communication skills with ability to influence at all levels.</li><li>Ability to travel regularly across Europe.</li></ul>   Desirable <ul><li>Experience within hyperscale data centre projects.</li><li>Chartered status or relevant engineering qualification.</li><li>Familiarity with digital quality systems (e.g., Procore, BIM 360, Zutec).</li><li>Background working with Tier 1 contractors or global clients.</li></ul>

Mechanical QAQC Lead

Site Contract Manager – Power Plant  Position: Site Contract Manager Start Date: August 2026 Duration: Approx. 3 years Working Hours: 40 hours (Mon–Fri), with potential to increase depending on project demands Role Overview This is a site-based position responsible for managing all commercial and contractual aspects during project execution. The successful candidate will work closely with site and project leadership to identify, mitigate, and manage contractual risks, while ensuring full compliance with contract terms across all stakeholders. Key Responsibilities General Duties<ul><li>Attend site meetings Monday to Friday, with occasional weekend meetings (paid overtime).</li><li>Coordinate and manage commercial matters on-site with the client, consortium partners, and subcontractors.</li><li>Gather and maintain documentation to protect our client’s contractual position and support risk and claims mitigation.</li><li>Communicate any commercial or contractual risks to Site Manager, Project Manager, Site Installation Manager, and Project Contract Manager.</li></ul>Subcontract & Contract Management<ul><li>Establish and maintain event logs, risk registers, and claims registers.</li><li>Prepare notices, claims, counterclaims, and change orders in collaboration with project teams.</li><li>Support the negotiation of claims and variations.</li><li>Manage non-conformance processes and support recovery of back-charges from subcontractors and suppliers.</li><li>Support commercial aspects of site purchasing activities and implementation of agreed procedures with partners.</li><li>Oversee subcontractor payment applications, issuing Payment Certificates and Milestone Certifications.</li></ul>Reporting, Documentation & Compliance<ul><li>Maintain accurate site records, including daily reports, working hours, and claim support documentation.</li><li>Review project progress reports to ensure key commercial risks and events are captured.</li><li>Maintain and organize contract documentation and records, including evidence for claims and delays.</li><li>Prepare, review, and distribute Minutes of Meetings.</li><li>Produce a weekly Contract Management report, covering:<ul><li>Project delays (EPC, client, or third parties)</li><li>Claims status and associated costs</li><li>Insurance events and recovery progress</li><li>Vendor performance and recovery actions</li></ul></li></ul>Risk, Claims & Commercial Oversight<ul><li>Track delays, costs, damages, and scope changes, and develop mitigation plans.</li><li>Monitor contractual milestones and project schedules, identifying deviations.</li><li>Raise and manage delay notices and claim notifications in a timely manner.</li><li>Support the Extra Works process for design changes, repairs, and site modifications.</li><li>Assist in the management of insurance claims, including documentation and coordination with adjusters.</li><li>Provide contractual guidance and interpretation to site teams to ensure compliance.</li></ul>Coordination & Stakeholder Management<ul><li>Attend daily, weekly, and monthly site meetings to identify and capture commercial risks and disputes.</li><li>Coordinate with site teams to identify potential delay or claim scenarios early.</li><li>Escalate risks impacting cost, schedule, or contractual obligations to senior project stakeholders.</li></ul>Key Requirements<ul><li>Degree in Engineering, Quantity Surveying, Law, Business Administration, or equivalent experience.</li><li>10 years’ experience in contract management within large infrastructure or EPC projects.</li><li>Experience in power generation, gas power plants, or substation projects is highly advantageous.</li><li>Strong knowledge of:<ul><li>Contract management & administration</li><li>Claims preparation & dispute resolution</li><li>Variation orders and extension of time (EOT) strategies</li></ul></li><li>Proven experience in high-value contract negotiations.</li><li>Solid understanding of commercial and contract law principles.</li><li>Strong technical awareness of project scope and contractual obligations.</li><li>Excellent communication and stakeholder management skills.</li><li>Good understanding of project risk management, planning, and controls.</li></ul>

Site Contracts Manager - Power Plant 

General Site Manager – Onshore Substation x2 Location: Norfolk/Swindon/London Duration: 30/03/2026 to 30/03/2027 Rotation: Mon-Fri, 40 hours a week Outside IR35 Description: MSP | UK | Client General Site Manager – Onshore Substation The Onshore General Site Manager is to act as the onsite Client Representative during the site initial designs, constructability assessments and planning of the works, prepare for site establishment and later construction of the Onshore Electrical Substation and associated onshore works. Supports the HVDC Package Manager through the construction phase, and manages all aspects of the Client’s site duties under the Contract. The role will co-ordinate the Client Site Representatives and ensure that all site related information is coordinated between the supporting functions within the project. Details: KEY RESPONSIBILITIES: The Onshore General Site Manager is to act as the onsite Client Representative during the site initial designs, constructability assessments and planning and later construction and handover of the works. Supports the HVDC Package Manager through the construction phase, and manages all aspects of the Client’s site duties under the Contract. The role will co-ordinate the client site representatives and and site information within the project. The role will facilitate resolution of site-based issues to ensure that employers risks are mitigated through regular/adhoc meetings, discussions, ensuring adequate recording of such. The role will have support of the Package Manager in representing and resolving site issues with the Contractor’s Senior Management team. The role will be required to have experience in site management of HV substation construction, including technical knowledge of civil engineering, HV Mechanical & Electrical Installations, testing & commissioning of HV systems and cables. All onshore substation site management activities with respect to the onshore works including, Health, Safety, Environment, Security, Maintenance pre-Handover. The role will need to become familiar with the Contracts, Consent Management Plans, Leases, Designs, Construction Phase Health & Safety Plan, package interfaces, the Employers Requirements (specifications) and any relevant contractors documentation in order the manage the site effectively. The role is expected to be experienced in managing relationships with key stakeholders, including National Grid, Associated Works Contractors and Client Senior Management, and will be the Project presence onsite. The role will also support resolution of client programme risk issues, including relating to Package interfaces. Shall provide co-ordination of all site resources within the onshore client site team, supported by the project engineers, quality inspectors, health & safety inspectors, environmental consultants, consents personnel etc. Liaison with the Commissioning Manager who is responsible for operating the HV Safety Rules for all energised plant. Support the interface planning activities with National Grid and the Onshore Cables Team. Reporting to senior leadership and the project as required. Ensure that the Contractor is fulfilling their duties of the Principal Contractor for the onshore substation site under CDM including: Ensure a safe system of work offshore incorporating the HV Safety Rules. Supervise and record all onshore works relevant to the HVDC substation and grid connection ensuring compliance with the defined health, safety, quality and technical standards Design & Implement an effective handover process for the onshore site from construction, commissioning to O&M. DELIVERABLES: Safe delivery of the Electrical transmission system for the project including continued development, construction and handover to operations, closeout of commercial aspects and delivery of all as built documentation for all associated packages KEY QUALIFICATIONS: A degree in Engineering or equivalent experience Site Management Safety Training Scheme (SMSTS) or equivalent required. High level safety qualifications such as NEBOSH would be an advantage MUST HAVE QUALIFICATION/EXPERIENCE: Extensive experience as a Site Manager role on HV substation construction projects including the integration of equipment throughout the build construction and installation process A proven track record in civil engineering, and HV substation site construction management An excellent understanding of the range of available civil engineering techniques, including HDD with a practical approach to implementation. Business proficient in English Role is site based and expectation is that the role is performed therefore at the site location NOTE: This JP has 2 positions, one for each of the below locations: NO ADDITIONAL TRAVEL COSTS TO/FROM THE BASE LOCATIONS MAY BE CHARGED Position 1. Base location Necton Onshore Substation, Swaffham, Norfolk. PE37 8EG. Travel also required to Swindon office, London Project Office and Coventry Office as required. Position 2: The base location will initially be the London DBS offices and will then change to the Onshore Substation site (TBA) when site activities commence with travel to London, Swindon and Coventry offices or other locations as required. Comments from MSP: KEY RESPONSIBILITIES CONTINUED: Ensure a safe system of work offshore incorporating the HV Safety Rules Supervise and record all onshore works relevant to the HVDC substation and grid connection ensuring compliance with the defined health, safety, quality and technical standards Design & Implement an effective handover process for the onshore site from construction, commissioning to O&M Deliverables Safe delivery of the Electrical transmission system for the project including continued development, construction and handover to operations, closeout of commercial aspects and delivery of all as built documentation for all associated packages" Key Qualifications A degree in Engineering or equivalent experience Site Management Safety Training Scheme (SMSTS) or equivalent required High level safety qualifications such as NEBOSH would be an advantage" Must have Qualification / Experience Extensive experience as a Site Manager role on HV substation construction projects including the integration of equipment throughout the build construction and installation process A proven track record in civil engineering, and HV substation site construction management An excellent understanding of the range of available civil engineering techniques, including HDD with a practical approach to implementation Business proficient in English Role is site based and expectation is that the role is performed therefore at the site location

General Site Manager

Annual Service BKR02 2026 (279229) Project Name: Annual Service BORKUMRIFFGRUND 02 2026 Duration: 17-Jun-2026 - 26-Aug-2026 (options to extend) Business Unit: Operations Type: AUG German Employed Contract ONLY (no freelance allowed) Rotations: 2 weeks on. 2 weeks off Rate: 62EUR an hour Description: The Consultant must bring his/her own PC and/or Iphone. External consultants’ equipment such as PCs, mobile phones and iPads must always be up-to-date with the latest iOS release. The owner must allow Ørsted’s AirWatch security and management software for iPhones and iPads to be installed. The app is mandatory on all mobile devices used by Ørsted staff (including External consultants) to protect them from cybercrime. The owner must grant approval for Ørsted to remove apps, data and access from privately owned equipment if it is deemed to pose a risk in relation to Ørsted’s security or the GDPR regulations, if the equipment is lost/stolen, or if the owner ceases to have an active contract with Magnit and/or Ørsted. When an external consultant leaves Ørsted, they must contact the IT Service Desk to remove all Ørsted apps and data. The IT Service Desk can only support privately owned equipment in connection with Ørsted’s AirWatch security and management software. Mi 6,00 onsigning Do 12,00 work Fr 12,00 work Sa 12,00 work So 12,00 work Mo 12,00 work Di 12,00 work Mi 12,00 work Do 12,00 work Fr 12,00 work Sa 12,00 work So 12,00 work Mo 12,00 work Di 12,00 work Mi 6,00 offsigning 168,00 total/rotation Requirements: AUG contracts only BKR02 consists of 56 Turbines, V164, 8.0 MW. The operation takes place on board our Service Operation Vessel (SOV), Portcall harbor is Emden. Standard PPE is to be brought by the consultant (Life-Vest with PLB, Survival Suit, Safety Boots S3 (ankle high), high-vis workwear, helmet, harness/lanyards, Avanti Glider AL04. A complete list of PPE requirements can be provided if required. Minimum Competency Requirements: Competent Technician: GWO- Working at heights (only valid for 12 months in Germany!) Advanced Rescue Training Enhanced first aid Sea Survival Manual handling Fire Awareness BTT Medical fitness certificate incl. chester step test Generic crane user training Avanti Lift User Training EUP WTSR Core Course Any Vestas certifications

Service Technician

EHS Advisor – Data Centre Construction Location: Mons, Belgium Sector: Data Centres / Mission-Critical Construction Employment Type: Permanent About the Role A leading international construction and engineering contractor is seeking an Environmental, Health & Safety (EHS) Advisor to support major data centre construction projects in Belgium. Working closely with Project Managers and the wider EHS team, you’ll play a key role in ensuring projects are delivered safely, responsibly, and in full compliance with statutory requirements. You’ll be hands-on across site activities, helping to embed a proactive safety culture while supporting high standards of environmental and occupational safety performance. This is an excellent opportunity for an EHS professional looking to develop their experience within mission-critical, fast-paced construction environments. Key Responsibilities<ul><li>Support the implementation of the company’s EHS policies to prevent injury, ill health, environmental harm, and damage</li><li>Promote a proactive safety culture across construction sites</li><li>Ensure compliance with local and statutory EHS requirements</li><li>Carry out regular site safety inspections, audits, and reporting</li><li>Track and ensure close‑out of corrective actions within agreed timescales</li><li>Support accident and incident investigations, including reporting and follow-up actions</li><li>Ensure all site operatives and subcontractors receive appropriate inductions</li><li>Monitor welfare facilities, site setup, and statutory notice displays</li><li>Review risk assessments and method statements (RAMS) for suitability</li><li>Ensure permit-to-work systems are correctly implemented</li><li>Monitor COSHH compliance and environmental protection measures</li></ul> Key Requirements<ul><li>Relevant qualification in Health & Safety, Environmental Management, or a related discipline</li><li>NEBOSH Certificate (or equivalent)</li><li>Proven EHS experience within construction environments</li><li>Knowledge of statutory health, safety, and environmental regulations</li><li>Experience conducting site inspections, audits, and investigations</li><li>Confident working with project teams and site management</li><li>Strong communication and organisational skills</li><li>Ability to work across live, fast-track construction sites</li></ul> Why Apply?<ul><li>Work on high-profile data centre and mission-critical projects</li><li>Gain exposure to complex, technically challenging builds</li><li>Join a growing European project portfolio</li><li>Clear progression opportunities within the EHS function</li><li>Stable, long-term project pipeline in Belgium</li></ul>

EHS Advisor

COMPANY SITE REPRESENTATIVE (Barge / Vessel Client Representative / Lead)** Qualifications <ul><li>Minimum BSc (Honours) in Mechanical Engineering or equivalent</li></ul>Experience <ul><li>Minimum 15 years total offshore Oil & Gas experience</li><li>Minimum 10 years’ experience in offshore construction projects including:<ul><li>Jacket installation</li><li>Decks and bridges</li><li>Subsea cables</li><li>Pipelines and risers</li><li>Hook-up and tie-ins</li><li>Pre-commissioning and commissioning</li></ul></li><li>Experience gained on:<ul><li>Offshore construction vessels</li><li>Self-elevating barges</li><li>Derrick and lay barges</li></ul></li></ul>Technical Knowledge <ul><li>Offshore construction practices</li><li>Marine and safety regulations</li><li>QA/QC</li><li>Welding and coating</li><li>Jacket and deck installation procedures</li><li>Anchor handling and barge movements</li><li>Survey, navigation, and positioning systems</li><li>Pipe laying, cable laying, and riser installation</li><li>Hook-up and tie-ins for piping, E&I</li><li>System and equipment commissioning</li><li>Familiarity with:<ul><li>SOLAS</li><li>MODU</li><li>ADNOC HSE Standards</li><li>ADNOC Offshore marine standards</li></ul></li></ul>Core Responsibilities <ul><li>Act as Project focal point and represent the Project Management Team during offshore installation campaigns</li><li>Report to ADNOC Offshore Project Team Leader (Abu Dhabi)</li><li>Act as main communication link with contractors, TPA, and Operations field personnel</li><li>Liaise closely with ADNOC Offshore Marine Representative</li><li>Ensure approved construction procedures are strictly followed</li><li>Obtain formal approval for any changes via Project MOC procedures</li><li>Develop risk mitigation measures based on risk assessments</li><li>Supervise and monitor contractors’ daily work activities</li><li>Review contractor variation and change-order requests and report impacts</li><li>Be responsible for all assigned ADNOC Offshore site team members</li><li>Produce:<ul><li>Daily progress reports</li><li>Accident/incident reports</li><li>Safety and improvement recommendations</li></ul></li><li>Sign Contractor Daily Progress Reports with comments</li><li>Ensure compliance with HSE, QA, and company standards</li><li>Conduct safety meetings, toolbox talks, and safety drills</li><li>Be familiar with emergency response plans (evacuation, medevac, etc.)</li><li>Produce a Close-Out Report upon assignment completion, including lessons learned</li><li>WMS approved</li></ul>

COMPANY SITE REPRESENTATIVE

Provision of a competent ADNOC Offshore Logistics (Marine / HSE) approved Marine Advisor to act as the COMPANY marine representative, experienced in offshore installation works. Responsibilities <ul><li>Conduct marine vessel inspections (Marine / HSE)</li><li>Attend Marine LD main office for routine daily work, including:<ul><li>Vessel monitoring</li><li>Preparation of Scope of Work (SOW) and specifications for vessel tenders</li><li>Reviewing risk assessments</li><li>Participating in technical evaluations for vessels</li><li>Conducting contractor audits (ISM and ASMC)</li></ul></li><li>Witness and monitor marine operations related to offshore lifts and installation activities</li><li>Participate in and conduct incident investigations</li><li>Provide technical and practical marine advice to contractor marine key personnel</li><li>Verify that all marine and operational documentation complies with ADNOC Offshore standards</li><li>Prepare all required reports</li><li>Participate in emergency management and ensure timely reporting to focal points</li><li>Ensure implementation of HSE marine-related rules</li></ul>Education & Qualifications <ul><li>One of the following:<ul><li>Unlimited Class 1 Master Mariner Certificate of Competence (STCW 1995 & amendments) from a white list country</li><li>BSc Degree in Maritime Discipline or equivalent</li></ul></li><li>Strong computer skills and experience in report writing</li><li>Very good command of written and spoken English</li></ul>Experience Requirements <ul><li>Minimum 10 years’ experience in offshore Oil & Gas, serving as Master on vessels such as:<ul><li>PSV</li><li>AHTS</li><li>Heavy Lift</li><li>Dive</li><li>Construction</li><li>Pipe Lay</li><li>Cable Lay</li><li>DP and conventional vessels</li></ul></li><li>Familiarity with:<ul><li>ADNOC Offshore fields</li><li>SIMO</li><li>ASMV</li><li>ASMC</li><li>JUIMS</li></ul></li><li>Prior experience in ADNOC Offshore oil fields</li></ul>

MARINE ADVISOR

Cable Lay Superintendent – Senior Duration: 25/5/2026 – 31/7/2026 Location: International Waters Project: Coastal Virginia Offshore Wind Farm Vessel: Living Stone (NL) Rate: Candidate expectations     Description:   Client information  This client is a world leader in the highly specialised fields of dredging, solutions for the offshore energy market, infra marine and environmental works. With more than 140 years of experience and 5,200 highly skilled professionals, we bring tailor-made solutions, innovation and new technologies to our customers’ projects, ensuring that they are performed safely, efficiently and cost-effectively.  Department Description and responsibilities   Offshore is a global solutions provider in the offshore oil, gas and renewables industry. We have an unrivalled track record in the transport and installation of foundations, turbines, inter-array cables, export cables and substations for offshore wind farms. In the oil & gas industry we are experts in landfalls and civil works, rock placement, heavy lift, umbilicals and installation and decommissioning services. By operating a high-tech and versatile fleet of vessels we offer flexible solutions for the most complex offshore energy projects. Primary Tasks and responsibilities   -Make sure all cable related operations are done in the most safe and optimal way.  -Lead a team of 10 to 15 members (foremen and operators).  -Hold the shift handover meetings with the team onboard.  -Liaise with colleagues on the bridge and surveyors for an optimal cable operation.  -Run and supervise all operations on the back-deck. This includes the operability of the Cable, installation System (CIS), ROVs, cranes and other equipment onboard.  -Make sure works are performed with the highest level of safety.  -Take care of the integrity of the cable during loading, transporting and installation phases.  -Do a daily log of activities performed.  -Assume responsibility for overseeing the cable installation process, ensuring precise, secure cable placement, and upholding the highest quality and performance standards.  -Utilize your technical acumen to identify and resolve complex technical challenges that may arise during cable installation, ensuring the seamless progress of projects.  -OIM is single point of contact but the Cable Lay Superintendents have daily contact with the client representatives during the operations and to answer questions about the progress and technical questions  Technical profile requirements   - 7 years of experience in submarine cable installation, demonstrated through several years of experience in senior technician or similar roles.  -Safety Focus: A strong commitment to prioritizing safety and adhering to safety protocols and guidelines.  -Leadership Excellence: Proven leadership abilities and exceptional communication skills to effectively manage and lead a diverse team.  Non-Technical profile requirements   -Strong communication skills  -Good knowledge & experience with MS Office  -Good command of English, both written and spoken  -Fit for Offshore work.  Methodology/Certification requirements   -MSC/MSc Degree in Civil Engineering, Mechanic Engineering, Chemical Engineering OR equivalent through experience. Certifications required -Valid US Visa or B1 OCS Wind (!) Visa -Full GWO -Offshore medical -VCA/SCC Language proficiencies   -Fluent speaking and writing English, proficiency in other languages is a major plus

Cable Lay Superintendent

Role Overview Design Manager, you will lead the full design process across the entire project lifecycle, ensuring design excellence from concept through construction and final handover. This role is central to aligning client expectations, technical compliance, construction delivery, and commercial objectives. You will serve as the key point of coordination between clients, consultants, subcontractors, BIM teams, and internal delivery teams, ensuring all design information is accurate, timely, compliant, and fully integrated into project execution. This position is ideal for an experienced construction or engineering professional with strong leadership capabilities, technical expertise, and a proven ability to manage multidisciplinary design teams on complex projects. Key Responsibilities Design Leadership & Stakeholder Coordination<ul><li>Lead and manage all design activities throughout project planning, development, construction, and closeout</li><li>Coordinate architects, engineers, consultants, subcontractors, and internal teams to ensure seamless design integration</li><li>Act as the primary contact for all design-related communication between project stakeholders</li><li>Chair and facilitate design coordination meetings, workshops, and technical reviews</li><li>Ensure design intent is maintained while balancing budget, programme, and buildability requirements</li><li>Promote collaboration across all disciplines to reduce conflicts and improve project outcomes</li></ul>Programme Management & Design Deliverables<ul><li>Develop and manage the design delivery schedule in line with overall project milestones</li><li>Monitor progress of design packages, identifying risks, delays, and resource challenges early</li><li>Ensure all drawings, specifications, and technical documentation are issued on time</li><li>Manage design revisions, technical queries, and change control processes to minimise disruption to site activities</li><li>Support procurement and construction teams with timely and coordinated technical information</li></ul>Quality Assurance & Regulatory Compliance<ul><li>Ensure all design outputs meet client specifications, contractual obligations, and project quality standards</li><li>Review and approve design submissions including construction drawings, shop drawings, technical submittals, and consultant packages</li><li>Verify compliance with Belgian, European, and relevant international building regulations</li><li>Oversee adherence to fire safety, building physics, structural integrity, and technical performance requirements</li><li>Drive continuous improvement in design quality, coordination standards, and document control</li></ul>BIM & Digital Design Coordination<ul><li>Co-lead BIM coordination alongside digital engineering teams</li><li>Support implementation of BIM workflows, clash detection, and model integration</li><li>Promote efficient use of digital design tools, project management systems, and collaborative platforms</li><li>Ensure design data is structured, coordinated, and accessible for all project stakeholders</li><li>Champion innovation in digital construction and design processes</li></ul>Construction Phase Support<ul><li>Provide technical design leadership during live construction activities</li><li>Conduct site visits and inspections to ensure accurate design implementation</li><li>Resolve on-site design issues, RFIs, and technical challenges efficiently</li><li>Coordinate design updates in response to site conditions or project changes</li><li>Manage the preparation and completion of As-Built documentation and handover packages</li></ul>Reporting & Project Visibility<ul><li>Prepare weekly and monthly design progress reports for senior leadership and clients</li><li>Track design KPIs, programme milestones, technical risks, and mitigation actions</li><li>Provide clear reporting on commercial, technical, and delivery impacts of design decisions</li><li>Support strategic project planning through data-driven design performance insights</li></ul>Required Skills & Experience Education & Professional Background<ul><li>Degree in Architecture, Civil Engineering, Structural Engineering, Building Services, MEP, or a related discipline</li><li>Significant experience in Design Management, Senior Design Coordination, or Technical Project Leadership within construction, infrastructure, or engineering sectors</li><li>Demonstrated success delivering multidisciplinary projects in complex environments</li></ul>Technical Expertise<ul><li>Strong knowledge of construction methods, sequencing, materials, and detailing</li><li>In-depth understanding of building regulations, fire safety, technical compliance, and quality standards</li><li>Proficiency in BIM, CAD, and digital coordination tools</li><li>Experience with design management systems, project controls, and document management platforms</li><li>Ability to integrate technical, commercial, and operational priorities</li></ul>Leadership & Communication Skills<ul><li>Exceptional stakeholder management and team leadership abilities</li><li>Strong communication, negotiation, and presentation skills</li><li>Highly organised with excellent problem-solving capabilities</li><li>Commercially aware with a practical understanding of project constraints</li><li>Able to manage complexity, change, and competing priorities in fast-paced environments</li></ul>Additional Requirements<ul><li>Fluency in English is essential</li><li>Dutch and/or French language skills are advantageous</li><li>EU work authorisation is required</li></ul>

Design Manager

EHS Lead – Data Centre Construction Location: Belgium Sector: Mission-Critical / Data Centre Construction Employment Type: Permanent About the Role An international construction and engineering contractor is seeking an experienced Environmental Health & Safety (EHS) Lead to support large-scale, mission-critical data centre projects across Belgium. This is a senior site-based leadership role, responsible for driving best-in-class EHS performance across complex, fast-paced construction environments. You’ll act as the EHS authority on site, influencing project teams, clients, and supply-chain partners while embedding a proactive, behavioural safety culture from pre-construction through commissioning and handover. This role goes beyond compliance — it’s about leadership, visibility, and raising standards on some of Europe’s most technically demanding projects. Key Responsibilities Leadership & Safety Culture <ul><li>Lead and champion a proactive, high-performance safety culture on site</li><li>Provide guidance and leadership to EHS Advisors and wider project teams</li><li>Act as the senior EHS point of contact for project leadership and client representatives</li><li>Drive continuous improvement and behavioural safety initiatives</li></ul> Operational Delivery <ul><li>Oversee all EHS activities on high-risk data centre construction sites</li><li>Ensure robust implementation of RAMS, permit-to-work systems, and safe systems of work</li><li>Carry out site inspections, audits, and safety walks, driving timely close-out of actions</li><li>Support safe planning and execution of high-risk activities (lifting operations, energisation, confined spaces, commissioning)</li><li>Ensure effective inductions, toolbox talks, and training programmes</li></ul> Governance & Compliance <ul><li>Ensure compliance with local, EU, and international EHS legislation</li><li>Maintain ISO 45001, ISO 14001, and internal EHS management systems</li><li>Lead incident investigations, root cause analyses, and corrective actions</li><li>Deliver accurate EHS reporting to internal and external stakeholders</li></ul> Stakeholder & Client Engagement <ul><li>Act as a key interface with clients on EHS matters</li><li>Influence subcontractors and supply chain partners to meet stringent safety standards</li><li>Participate in audits, inspections, and regulatory engagement</li></ul> Key Requirements<ul><li>Degree-qualified in Occupational Health & Safety, Environmental Science, Engineering, or similar</li><li>NEBOSH Diploma (or equivalent Level 6 qualification)</li><li>7–10 years’ EHS experience within construction or technical project environments</li><li>Proven data centre construction experience (essential)</li><li>Strong knowledge of high-risk construction activities in mission-critical environments</li><li>In-depth understanding of EU and local EHS legislation</li><li>Experience implementing ISO 45001 & ISO 14001</li><li>Confident communicator with strong stakeholder management skills</li><li>Fluent English required (Dutch and/or French advantageous)</li></ul> Why Apply?<ul><li>Work on major, high-value mission-critical data centre projects</li><li>Take ownership of EHS on complex, fast-track builds</li><li>Join a growing international contractor with a strong pipeline across Europe</li><li>High visibility role with real influence on project outcomes and safety culture</li></ul>

EHS Lead

Protection & Controls Technician (Substation Testing & Commissioning) Location: Nationwide (U.S. – 100% Travel) Position Overview: We are seeking a highly skilled Protection & Controls (P&C) Technician to support substation testing and commissioning projects across the United States. This role is fully travel-based and requires extensive fieldwork supporting new construction, upgrades, and maintenance of high-voltage substations. The ideal candidate will have strong experience in relay testing, control systems, and commissioning activities within utility or EPC environments and be comfortable working in dynamic, fast-paced field conditions. Key Responsibilities<ul><li>Perform testing, commissioning, and maintenance of protection and control systems in substations (up to 765kV or as applicable)</li><li>Conduct functional testing of protective relays, including SEL, GE, ABB, Siemens, and other OEM devices</li><li>Execute end-to-end commissioning activities, including:<ul><li>Point-to-point wiring checks</li><li>Control circuit verification</li><li>SCADA and communications testing</li><li>Breaker timing and functional checks</li></ul></li><li>Interpret and work from schematics, wiring diagrams, and logic drawings</li><li>Perform relay settings verification and implementation</li><li>Carry out troubleshooting and diagnostics on P&C systems, resolving issues efficiently in the field</li><li>Support energization and system turn-over activities</li><li>Ensure compliance with safety standards, company procedures, and client requirements</li><li>Document testing results, produce commissioning reports, and maintain accurate field records</li><li>Collaborate with project engineers, utility clients, and field teams to deliver projects on schedule</li></ul>Required Qualifications<ul><li>3 years of experience in protection & controls, substation testing, or commissioning</li><li>Associate’s degree or technical certification in Electrical Engineering Technology or related field</li><li>Experience working with major utilities or EPC contractors</li><li>Hands-on experience with protective relay testing equipment</li><li>Strong understanding of:<ul><li>Substation protection schemes (line, transformer, bus, feeder protection)</li><li>Electrical fundamentals and power systems</li></ul></li><li>Ability to read and interpret electrical drawings and relay logic</li><li>Valid driver’s license and ability to travel extensively (100%)</li><li>Strong commitment to safety practices and procedures</li></ul>

Protection & Controls Technician

Protection & Controls Technician (Substation Testing & Commissioning) Location: Nationwide (U.S. – 100% Travel) Position Overview: We are seeking a highly skilled Protection & Controls (P&C) Technician to support substation testing and commissioning projects across the United States. This role is fully travel-based and requires extensive fieldwork supporting new construction, upgrades, and maintenance of high-voltage substations. The ideal candidate will have strong experience in relay testing, control systems, and commissioning activities within utility or EPC environments and be comfortable working in dynamic, fast-paced field conditions. Key Responsibilities<ul><li>Perform testing, commissioning, and maintenance of protection and control systems in substations (up to 765kV or as applicable)</li><li>Conduct functional testing of protective relays, including SEL, GE, ABB, Siemens, and other OEM devices</li><li>Execute end-to-end commissioning activities, including:<ul><li>Point-to-point wiring checks</li><li>Control circuit verification</li><li>SCADA and communications testing</li><li>Breaker timing and functional checks</li></ul></li><li>Interpret and work from schematics, wiring diagrams, and logic drawings</li><li>Perform relay settings verification and implementation</li><li>Carry out troubleshooting and diagnostics on P&C systems, resolving issues efficiently in the field</li><li>Support energization and system turn-over activities</li><li>Ensure compliance with safety standards, company procedures, and client requirements</li><li>Document testing results, produce commissioning reports, and maintain accurate field records</li><li>Collaborate with project engineers, utility clients, and field teams to deliver projects on schedule</li></ul>Required Qualifications<ul><li>3 years of experience in protection & controls, substation testing, or commissioning</li><li>Associate’s degree or technical certification in Electrical Engineering Technology or related field</li><li>Experience working with major utilities or EPC contractors</li><li>Hands-on experience with protective relay testing equipment</li><li>Strong understanding of:<ul><li>Substation protection schemes (line, transformer, bus, feeder protection)</li><li>Electrical fundamentals and power systems</li></ul></li><li>Ability to read and interpret electrical drawings and relay logic</li><li>Valid driver’s license and ability to travel extensively (100%)</li><li>Strong commitment to safety practices and procedures</li></ul>

Protection & Control Technician

Senior Authorised Person (Electrical) We are looking for an experienced Senior Authorised Person to lead electrical safety on complex engineering and construction projects. The role is responsible for managing HV/MV/LV systems, including safe isolation, energisation, switching, and enforcing electrical safety procedures such as lock-out/tag-out and permit-to-work systems. You will ensure compliance with all safety rules, review risk assessments and method statements, manage arc flash and electrical hazards, and oversee commissioning activities through to energisation. Key requirements include: <ul><li>Qualified electrician with relevant certification</li><li>Experience with HV/MV/LV switching and testing</li><li>Strong knowledge of electrical safety systems and regulations</li><li>Ability to manage high-risk activities and lead teams</li><li>Competence in fault finding, testing, and commissioning processes</li></ul>

We are seeking an experienced LV/MV Authorised Person to support complex construction and engineering projects in Munich, working on large-scale data centre and industrial developments. Role overview You will be responsible for the safe control of electrical works on site, including switching, isolations, energisations, and permit-to-work systems within a live project environment. Key responsibilities<ul><li>Enforce Electrical Safe Systems of Work (ESSOW), PTW, LOTO, and COHE procedures</li><li>Manage safe switching, isolations, and energisation activities (LV/MV)</li><li>Review and approve RAMS and subcontractor electrical documentation</li><li>Support commissioning, testing, and inspection activities</li><li>Ensure compliance with safety procedures and site regulations</li><li>Identify hazards and implement control measures</li><li>Maintain clear communication with site and engineering teams</li><li>Assist with incident reporting and investigations</li></ul>Requirements<ul><li>Qualified electrician </li><li>Strong experience with LV/MV systems and infrastructure projects</li><li>Background in data centres, power, or industrial environments</li><li>Experience with testing, commissioning, and switching operations</li><li>Knowledge of EN standards and local electrical regulations</li><li>MV switching experience (where applicable)</li><li>Strong understanding of electrical drawings and systems</li></ul>

Authorised Person 

Mechanical & Piping Estimator / Kalkulator Frankfurt, Germany | Data Centers & Life Sciences Projects Are you an experienced Mechanical & Piping Estimator looking to work on some of Europe’s most complex and technically advanced projects? We are supporting a fast‑growing, international construction organisation delivering high‑tech facilities across the Life Sciences and Data Center sectors. With a strong footprint across Germany and Switzerland, this business is known for delivering sophisticated, mission‑critical projects using a highly collaborative and engineering‑led approach. Due to continued growth, they are seeking a Mechanical and Piping Estimator / Kalkulator to strengthen their preconstruction team in Frankfurt. The Role  As a Mechanical & Piping Estimator, you will play a key role in shaping project success from early concept through to final construction documentation. Key responsibilities include: <ul><li>Developing conceptual budgets and detailed cost estimates for Mechanical & Plumbing works</li><li>Preparing independent cost estimates, tenders, financial analyses, and pricing strategies</li><li>Reviewing technical drawings and specifications, ensuring scope alignment across MEP systems (HVAC, Electrical, Fire Protection, BMS/BAS, EPMS)</li><li>Driving Value Engineering initiatives and identifying cost‑saving opportunities</li><li>Leading communication with MEP subcontractors, suppliers, and vendors</li><li>Supporting procurement and tendering, including commercial evaluation and negotiations</li><li>Collaborating with preconstruction and design teams to manage risk, scope clarity, and cost certainty</li></ul>What We’re Looking For<ul><li>Apprenticeship or degree in engineering or a related technical discipline</li><li>Fluent German and English (written and spoken)</li><li>5 years’ experience in Mechanical & Plumbing estimating</li><li>Background in Data Centers, Life Sciences, Pharmaceutical, or Advanced Technology projects</li><li>Strong knowledge of local German standards, market norms, and supply chain</li><li>Experience using cost estimating, quantity take‑off, CAD, and MS Office tools</li><li>A structured, analytical working style with excellent communication skills</li><li>Ability to manage multiple preconstruction workflows in a dynamic environment</li></ul>Why Apply?<ul><li>Work on technically challenging, high‑profile projects</li><li>Be part of a collaborative, international project delivery team</li><li>Strong pipeline of work across Germany and Europe</li><li>Opportunity to influence projects early and add real value through preconstruction expertise</li><li>Long‑term career growth within a stable and expanding organisation</li></ul>

Estimator (Mechanical)

Salary: £55-60k per year The Opportunity We are looking for an experienced CSA Quantity Surveyor to join our project team in the UK. The successful applicant will work closely with the project leadership team and wider Commercial department to ensure the successful delivery of the project for our clients and stakeholders.   Key Tasks <ul><li>Provide commercial and contractual administration support to the Commercial Manager.</li><li>Undertaking internal valuations and production of cost reports</li><li>Supporting the management of applicable subcontract packages and overseeing payments to subcontractors, suppliers and consultants</li><li>Preparing remeasures and variations for submission and follow on agreement with our clients</li><li>Reporting on project budgets and variations</li><li>Distribute and track invoices to various project owners/leads for approval</li><li>Respond to and resolve enquiries from Suppliers, Procurement, and Finance departments (including monthly accruals) in a professional and timely manner</li></ul>Key Qualifications Required: <ul><li>A CSA or tertiary qualification in Quantity Surveying, Engineering, or a similar field.</li><li>A minimum of 3 years of post-graduate experience in the construction sector.</li><li>Strong analytical skills and ability to clearly present findings.</li><li>High level of computer literacy, with experience using relevant estimating software.</li><li>Good communication skills for internal and external liaison.</li><li>Ability to achieve demanding time and quality targets.</li><li>Meticulous approach to take-offs and pricing to ensure accuracy.</li></ul>

CSA Quantity Surveyor

Mechanical Design Engineer – Senior ASAP to end of the year (options to extend) Olen, Belgium   Your task is to participate in engineering projects for the site facilities and the different business units EOM & CSM to modernize, adapt and expand their hydro- and pyrometallurgical production facilities on the Olen site.   Primary tasks & responsibilities <ul><li>Translate client requirements into a technical design for equipment, piping, and mechanical components of an installation.</li><li>Provide input and coordinate the drawing of PFDs and P&IDs by a drafter.</li><li>Design layout plans, mechanical structures, and components in 3D, create detailed drawings, or coordinate the drafting by a drafter.</li><li>Prepare piping specifications (including isometrics).</li><li>Perform basic calculations (pipe resistance, pump calculations, pipe sizing, determining PED class, heat capacity, etc.).</li><li>Provide advice for risk analyses and ensure the implementation of measures in the design.</li><li>Prepare specifications/requirement books for bidding and execution files.</li><li>Participate in procurement activities related to projects (from inquiry, through ordering and delivery, to completion and invoicing).</li><li>Prepare budgets and contribute to planning for your discipline.</li><li>Respect agreed quality, deadlines, and budgets.</li><li>Discuss the construction file with site managers regarding project realization and provide technical support during execution and startup of the project.</li><li>Maintain contacts with internal clients and external partners/contractors.</li><li>Monitor the quality of work delivered by external partners/contractors.</li><li>Archive documents and ensure an as-built technical construction file is maintained.</li></ul>  Technical Profile Requirements: <ul><li>Bachelor’s or Master’s degree in Mechanics or Electromechanics or equivalent through experience.</li><li>5 years of relevant experience in designing process installations in an industrial environment.</li><li>Experience with AutoCAD and ACAD Plant 3D software (experience with Revit, Inventor, or other programs is a plus).</li><li>Experience in setting up 3D layouts is a plus.</li><li>Operational knowledge of legal regulations and guidelines (PED, ATEX, VLAREM, etc.) is a plus.</li><li>Basic knowledge of chemistry, electricity, and automation, along with necessary material knowledge.</li></ul>  Non-Technical Profile Requirements: <ul><li>Skilled in analyzing, reporting, organizing, and solving technical issues.</li><li>A team player with strong communication and social skills.</li><li>Proficient in using office software packages.</li></ul>  Certifications <ul><li>VCA is mandatory</li></ul>  Language proficiencies <ul><li>Fluent in Dutch & English</li><li>Basic knowledge of German & French</li></ul>  Location <ul><li>Olen</li><li>On site presence is mandatory.</li><li>Ad hoc home work can be approved by the hiring manager upon request.</li></ul>  Contract <ul><li>First contract till EOY</li><li>extension possible</li></ul>  Interviews <ul><li>First interview via teams: 30-45min.</li><li>2nd interview onsite at Olen</li></ul>

Mechanical Design Engineer

Project Scheduler – CCPP (EPC Power Projects) EarthStream Global is currently recruiting for an experienced Project Scheduler to support the delivery of large‑scale Combined Cycle Power Plant (CCPP) projects. This role is suited to a planning professional with a strong background working on EPC power generation projects, providing schedule control, analysis, and reporting across all project phases. The Project Scheduler will play a key role in supporting project management teams by developing, maintaining, and analysing detailed project schedules to ensure programme milestones are achieved. Key Responsibilities<ul><li>Develop, maintain, and manage fully integrated EPC project schedules for CCPP projects from design through commissioning.</li><li>Establish and maintain Level 3 and Level 4 schedules covering engineering, procurement, construction, installation, and commissioning activities.</li><li>Coordinate closely with engineering, procurement, construction, commissioning, and project management teams to validate schedule logic and sequencing.</li><li>Monitor progress against baseline schedules and identify critical paths, float consumption, and schedule risks.</li><li>Perform schedule updates, progress measurement, and forecast analysis.</li><li>Support mitigation planning and recovery schedules where delays or risks are identified.</li><li>Prepare and present schedule reports, dashboards, and progress updates for internal and client stakeholders.</li><li>Interface with cost control teams to support integrated schedule and cost performance analysis.</li><li>Participate in project reviews, planning workshops, and schedule risk assessments.</li><li>Ensure planning best practices and EPC procedures are consistently applied.</li></ul>Required Experience & Qualifications<ul><li>Proven experience working as a Project Scheduler / Planning Engineer on CCPP or thermal power plant projects.</li><li>Strong background working EPC‑side (Engineering, Procurement & Construction).</li><li>Solid understanding of the full power plant project lifecycle, including:<ul><li>Engineering and design phases</li><li>Long‑lead equipment procurement</li><li>Construction and installation sequencing</li><li>Pre‑commissioning, commissioning, and handover</li></ul></li><li>Proficiency in Primavera P6 (mandatory); experience with other planning tools is an advantage.</li><li>Experience developing and managing schedules for multi‑disciplinary power projects.</li><li>Excellent communication and stakeholder coordination skills.</li><li>Strong reporting and documentation capabilities.</li></ul>Preferred Qualifications<ul><li>Degree in Engineering, Construction Management, or a related discipline.</li><li>Experience working on international or large‑scale CCPP projects.</li><li>Familiarity with claims support, delay analysis, and contractual schedule requirements.</li></ul>

Project Scheduler - Power Plants - Texas

Project Scheduler - Power Plants - Louisiana

Project Scheduler - Power Plants - Georgia

Project Scheduler - Site Based

Commissioning Manager – Power Plant Job Summary: The Commissioning Manager is responsible for leading and executing the full commissioning scope of a Power Plant, from mechanical completion through to Final Turnover and commercial operation. This role requires proven leadership in Power Plant commissioning, strong technical expertise across gas turbine, steam turbine, HRSG, BOP, and electrical systems, and strict enforcement of EHS, quality, and regulatory compliance. Key Responsibilities Commissioning Leadership & Execution <ul><li>Lead, manage, and coordinate the multidisciplinary commissioning team across all CCPP systems.</li><li>Develop, review, and execute the Commissioning Management Plan, detailed system commissioning procedures, test protocols, and schedules.</li><li>Plan and execute commissioning activities from Mechanical Completion (MC) through Cold Commissioning, Hot Commissioning, First Fire, First Synchronization, Performance Testing, Reliability Run, and Final Turnover.</li><li>Interface closely with Construction, Engineering, OEMs, Vendors, and the Client to ensure seamless handover and issue resolution.</li><li>Oversee commissioning of Gas Turbines, Steam Turbines, HRSGs, Balance of Plant, Electrical, I&C, Water Treatment, and Auxiliary Systems.</li><li>Ensure all pre-commissioning, flushing, blowing, testing, and start-up activities are executed safely and to specification.</li><li>Enforce the highest standards of Environmental, Health & Safety (EHS) throughout all commissioning activities.</li><li>Ensure commissioning is executed in full compliance with project HSE plans, local regulations, permits, and site safety rules.</li></ul>Required Qualifications & Experience Education<ul><li>Bachelor’s degree in Mechanical, Electrical, or Chemical Engineering (or equivalent).</li><li>Minimum 10–15 years of power plant experience, with proven leadership in Combined Cycle Power Plant (CCPP) commissioning.</li><li>Demonstrated experience leading commissioning teams on large-scale CCPP projects through to Commercial Operation.</li><li>Strong hands-on experience with GT, ST, HRSG, Electrical, and I&C commissioning.</li><li>Experience with OEM coordination and grid synchronization processes is essential.</li></ul>

Commissioning Manager - Power Plant 

Commissioning Manager – Combined Cycle Power Plant Job Summary: The Commissioning Manager is responsible for leading and executing the full commissioning scope of a Combined Cycle Power Plant, from mechanical completion through to Final Turnover and commercial operation. This role requires proven leadership in CCPP commissioning, strong technical expertise across gas turbine, steam turbine, HRSG, BOP, and electrical systems, and strict enforcement of EHS, quality, and regulatory compliance. Key Responsibilities Commissioning Leadership & Execution <ul><li>Lead, manage, and coordinate the multidisciplinary commissioning team across all CCPP systems.</li><li>Develop, review, and execute the Commissioning Management Plan, detailed system commissioning procedures, test protocols, and schedules.</li><li>Plan and execute commissioning activities from Mechanical Completion (MC) through Cold Commissioning, Hot Commissioning, First Fire, First Synchronization, Performance Testing, Reliability Run, and Final Turnover.</li><li>Interface closely with Construction, Engineering, OEMs, Vendors, and the Client to ensure seamless handover and issue resolution.</li><li>Oversee commissioning of Gas Turbines, Steam Turbines, HRSGs, Balance of Plant, Electrical, I&C, Water Treatment, and Auxiliary Systems.</li><li>Ensure all pre-commissioning, flushing, blowing, testing, and start-up activities are executed safely and to specification.</li><li>Enforce the highest standards of Environmental, Health & Safety (EHS) throughout all commissioning activities.</li><li>Ensure commissioning is executed in full compliance with project HSE plans, local regulations, permits, and site safety rules.</li></ul>Required Qualifications & Experience Education<ul><li>Bachelor’s degree in Mechanical, Electrical, or Chemical Engineering (or equivalent).</li><li>Minimum 10–15 years of power plant experience, with proven leadership in Combined Cycle Power Plant (CCPP) commissioning.</li><li>Demonstrated experience leading commissioning teams on large-scale CCPP projects through to Commercial Operation.</li><li>Strong hands-on experience with GT, ST, HRSG, Electrical, and I&C commissioning.</li><li>Experience with OEM coordination and grid synchronization processes is essential.</li></ul>

Commissioning Manager - CCPP

Commissioning Manager / Client Representative for Mission Critical – Data Centers EarthStream Global is currently hiring a Commissioning Manager / Client Representative to support the delivery of complex mission‑critical data centre projects. This role requires a commissioning professional with a strong background in Data Centre CX (Commissioning & Validation) who can act as a key interface between site teams, project teams, and the client, ensuring technical issues are identified early and resolved effectively. The position is both technical and oversight‑focused, with responsibility for commissioning execution, quality control, and quality assurance throughout the project lifecycle. Key Responsibilities Commissioning & Client Representation <ul><li>Act as the Client Representative for all commissioning activities on site.</li><li>Lead and oversee Data Centre commissioning (CX) from early-stage planning through IST, validation, and handover.</li><li>Serve as the primary liaison between site teams, project management, vendors, and client/end‑user stakeholders.</li><li>Proactively identify commissioning risks, technical issues, or programme conflicts and drive resolutions.</li><li>Review and manage commissioning strategies, schedules, method statements, test scripts, and procedures.</li><li>Ensure systems are commissioned in line with design intent, client standards, and operational requirements.</li></ul>Quality Control & Quality Assurance <ul><li>Ensure all commissioning activities comply with the project Quality Management Plan.</li><li>Implement and monitor Quality Control (QC) procedures during commissioning and testing activities.</li><li>Carry out reviews of installation readiness, pre‑commissioning sign‑off, and test readiness.</li><li>Verify accuracy and completeness of commissioning documentation, test records, and close‑out deliverables.</li><li>Identify non‑conformances and coordinate corrective actions with construction, commissioning, and vendor teams.</li><li>Support audits, client inspections, and quality reviews related to commissioning and system validation.</li><li>Ensure handover documentation meets client QA/QC standards and operational acceptance criteria.</li></ul>Coordination & Reporting <ul><li>Facilitate communication between construction, commissioning agents, QA/QC teams, and client stakeholders.</li><li>Track progress against commissioning milestones and highlight risks to programme or quality.</li><li>Provide regular status updates, technical reports, and issue logs to the client and project leadership.</li><li>Support witnessing, validation, and acceptance testing activities.</li></ul>Required Experience & Qualifications<ul><li>Proven experience as a Commissioning Manager, Lead Commissioning Engineer, or Client Representative on mission‑critical data centre projects.</li><li>Strong expertise in Data Centre CX, including mechanical, electrical, controls, and Integrated Systems Testing (IST).</li><li>Demonstrated experience with quality control and quality assurance within commissioning environments.</li><li>Strong knowledge of critical infrastructure systems (HV/LV distribution, UPS, generators, cooling systems, BMS).</li><li>Experience representing the client or end user is highly desirable.</li><li>Excellent stakeholder engagement, problem‑solving, and communication skills.</li><li>Ability to work collaboratively on site and manage multi‑disciplinary teams.</li><li>Strong documentation, reporting, and organisational skills.</li></ul>

Commissioning Manager / Client Representative - Oklahoma

HSE Advisor  Project: Celtic Mob Date: approx. mid-end May Duration: approx. 6 weeks Position: HSE Advisor Mob: Cork SoW: Post-lay burial (Trenching & jetting), survey   Required Certificates 1. Valid Medical Fitness Certificate OGUK or STCW 2. Valid Maritime Safety Training Certificate full GWO or Foet Bosiet 4. For non-EU citizens, working permit 5. ETA Visa 6. A1 certification

SCADA Engineer Representative Duration: 01-May-2026 - 28-Feb-2027 Department: Electrical Systems Rotations: 14/14 days – 12 hrs a day Location: Rhode Island, USA Description: We are seeking an experienced SCADA Commissioning Lead to support the delivery of SCADA systems across offshore wind projects. The role is positioned as an independent, on-site consultant function with responsibility for ensuring that all SCADA commissioning activities are executed safely, in compliance with applicable standards, and in alignment with the overall project schedule. The consultant will act as the central coordination point for SCADA commissioning, working across contractors, engineering teams, and commissioning management to ensure seamless execution. The scope includes Substation Control Systems, WTG SCADA and grid compliance, communication networks, metering systems, and associated auxiliary systems. The role requires both technical depth and the ability to operate effectively in a complex, multi-stakeholder EPC environment. A key part of the assignment is to establish and maintain full control over commissioning activities. This includes driving the preparation and execution of FAT, SAT, and SIT, ensuring that all testing is properly conducted, documented, and approved. The consultant will be responsible for developing and maintaining the SCADA Commissioning Plan, including scope definition, quality assurance, and timelines, and for ensuring that all deliverables meet internal standards as well as regulatory and HSE requirements. The consultant is expected to actively manage interfaces between SCADA contractors, electrical commissioning teams, and project stakeholders. This includes coordinating daily commissioning activities, monitoring progress against the plan, and proactively identifying risks that may impact schedule or quality. Where deviations occur, the consultant must take ownership of driving corrective actions and ensuring alignment across involved parties. In addition, the role carries a clear mandate to ensure quality and compliance. The consultant will have the authority to challenge and reject non-compliant work or documentation and is expected to enforce project standards consistently across all SCADA-related activities. Regular reporting to the Commissioning Manager and SCADA Package Manager will be required, with a focus on transparency, risk visibility, and progress tracking. Overall, the success of the assignment will be measured by the timely and high-quality commissioning of SCADA systems, the absence of critical HSE incidents within scope, and the delivery of complete, audit-ready documentation. The consultant is expected to contribute not only through execution, but by strengthening coordination, reducing risk, and ensuring that SCADA commissioning supports the broader project objectives. The resource will work onshore and offshore. The Consultant must bring his/her own PC and/or Iphone. External consultants’ equipment such as PCs, mobile phones and iPads must always be up-to-date with the latest iOS release. The owner must allow the client’s AirWatch security and management software for iPhones and iPads to be installed. The app is mandatory on all mobile devices used by client staff (including External consultants) to protect them from cybercrime. The owner must grant approval for client to remove apps, data and access from privately owned equipment if it is deemed to pose a risk in relation to client’s security or the GDPR regulations, if the equipment is lost/stolen, or if the owner ceases to have an active contract with Magnit and/or client. When an external consultant leaves the client, they must contact the IT Service Desk to remove all client apps and data. The IT Service Desk can only support privately owned equipment in connection with client's AirWatch security and management software. Requirements: The ideal candidate brings a minimum of five years of experience within SCADA or automation commissioning, preferably from offshore wind or similar large-scale infrastructure projects. A solid technical foundation combined with strong project execution capabilities is essential, as is the ability to operate independently in a demanding site environment. Experience working with international contractors and managing complex interfaces is critical to success in this role. Has GWO and hold the cost to maintain it. A person with offshore Wind expirations and is willing to stay for a longer period at the time if needed.

SAP (Senior Authorised Person) – 66kV 04/2026 – 03/2028 Responsible for HV system integration, operational supervision and electrical safety rules (HV/MV/LV). Ensure safety when working with High HV and LV. Responsibilities <ul><li>Responsible for electrical issues accordingly to the affected Country's legislation and regulation.</li><li>Delegating scopes of works for the whole team of Transmission Specialist on sites both offshore and onshore work scopes.</li><li>Responsible for and managing rotaplan’s for all Transmission Specialist and Operators on site.</li><li>Leading all improvements of instructions and site-specific instructions improvements related to High Voltage electrical operations on sites.</li><li>Implementation of the client's Electrical Safety Rules on site, including the safe system of Work.</li><li>Advise operationally on high voltage electrical installations to WTG, offshore substations and both HV submarine and onshore cables.</li><li>Oversee safe commissioning of grid connections, onshore substations and associated MV/HV/LV plant and equipment.</li><li>Oversee all MV/HV/LV electrical operational activities to ensure safety, security and integrity of the HV network.</li><li>Contribute to proactive management, good coordination and communication between all parties and that the process works effectively.</li><li>Coordinate MV/HV/LV commissioning activities through the project construction Stages.</li><li>Advise operationally on high voltage electrical installations to WTG, offshore substations and both HV submarine and onshore cables.</li><li>Oversee all MV/HV/LV electrical operational activities to ensure safety, security and integrity of the HV network.</li><li>Oversee and the delegation of planning of all switching activities on sites, both offshore and onshore activities.</li><li>Controlling the safety documents for the Electrical Safety Rules on site.</li><li>Define safety procedures for electrical matters.</li><li>Delegation of tasks to the Operators on sites, who oversee safe commissioning of grid connections, onshore substations and associated MV/HV/LV plant and equipment.</li><li>Reviewing the high voltage scope of work.</li><li>Knowledge and experience with country specific standards.</li></ul> Tasks <ul><li>Ensure compliancy with and managing of the client's Electrical Safety Rules.</li><li>Safety coordination in electrical matters.</li><li>Manage and coordinate HV/MV/LV commissioning activities.</li><li>Coordinate with National Grid and attend commissioning panel meetings.</li><li>Act as senior authorized person.</li><li>Outage management and network control in collaboration with the Control Engineers.</li><li>Prepare and check high voltage switching schedules.</li><li>Update MV/HV/LV schematic diagrams.</li><li>Inspect work sites and perform site safety inspections and auditing for electrical matters.</li><li>Check method statements for electrical matters.</li><li>Implement and provide training programs for relevant staff according to the rules.</li><li>Mentor HV APs during field training.</li></ul> Deliverables <ul><li>Input to the project commissioning management manual and related documents (including pre-commissioning and commissioning quality plans).</li><li>Participation in different audits.</li><li>Reports from FAT & SAT on the different high voltage equipment’s.</li><li>Onsite check of switching programs.</li><li>Participation in the planning of resource and work activities.</li><li>Participation in authorizations and assessments of new candidates.</li><li>Deliver inputs to the design phase of the project on technical aspects.</li></ul> Decision Authority <ul><li>Final say in relation to MV/HV switching and isolations.</li><li>Issue of the client's Electrical Safety Rules safety rules documents.</li><li>Organization and management of the SAP permit office, including all operational staff.</li></ul> Qualifications and Requirements <ul><li>Several years of operation and commissioning experience within the field of high voltage 9electricity, offshore experience preferable.</li><li>Appropriate electrical qualification and background related to the authorization scope.</li><li>Minimum 3 year of working experience within onshore substations systems.</li><li>Complete and up to date GWO courses and HUET with CA-EBS if required by site (climbing gear person weight limit – 120kg/264lb).</li></ul>

Senior Authorised Person 66KV

Join our clients team and work on world-class hyperscale data centre projects with leading global clients! We are seeking an experienced Electrical Authorised Person to ensure safety, compliance, and excellence across electrical commissioning and operations. Key Responsibilities Safety: <ul><li>Enforce company procedures including Control of Hazardous Energies, Permit to Work, and Lock-Out Tag-Out (LOTO) systems. </li><li>Ensure compliance with the Electrical Safe System of Work (ESSOW) and client safety directives. </li><li>Review and approve subcontractor electrical RAMS and COHE documentation. </li><li>Manage and control LOTO systems, safe switching, energisations, and isolations during commissioning. </li><li>Conduct regular safety audits, inspections, and incident reporting. </li><li>Ensure correct use, selection, and maintenance of electrical PPE and arc flash mitigation procedures. </li></ul>Technical: <ul><li>Perform commissioning, testing, troubleshooting, and inspection of LV/MV electrical systems, including MCCs, VSDs, switchgear, and distribution panels. </li><li>Read and interpret technical drawings, SLDs, and wiring diagrams. </li><li>Complete and record all pre- and post-energisation testing in compliance with local regulations. </li><li>Support all commissioning phases (Levels 1–5) and enforce the Electrical Permit to Work system. </li><li>Assist in electrical incident investigations and ensure safety and calibration of testing equipment. </li><li>Execute safe switching schedules and energisation procedures under SAP direction. </li><li>Collaborate effectively within multi-disciplinary teams. </li></ul>Why Join Us: <ul><li>Work on prestigious hyperscale data centre projects with global clients. </li><li>Competitive compensation package with accommodation and travel support. </li><li>Opportunity for long-term engagement and career development within a growing international team. </li></ul>visa support available for UK Citizens.

Authorised Person - Netherlands

Senior Authorised Person (SAP) – Hyperscale Data Centre Projects  We are seeking an experienced Senior Authorised Person (SAP) to join our clients team on cutting-edge hyperscale data centre projects in Germany. This is an exciting opportunity to play a key role in the safe and efficient operation of HV/ MV and LV systems within one of the world’s fastest-growing infrastructure sectors. You will be responsible for implementing, supervising, and controlling all electrical switching operations, isolations, and energisation activities in accordance with project and client safety standards.  Key Responsibilities<ul><li>Manage and oversee HV/LV electrical operations, ensuring full compliance with safety rules and site procedures.</li><li>Prepare and execute switching schedules, isolation procedures, and testing protocols.</li><li>Issue and control safety documentation, including permits, limitations, and sanction-for-test.</li><li>Coordinate with design, construction, and commissioning teams to ensure system integrity.</li><li>Maintain a high standard of safety awareness and ensure adherence to EN 50110-1 and other relevant standards.</li><li>Provide guidance and training to authorised and competent persons as required.</li></ul>Requirements<ul><li>Proven experience working as a Senior Authorised Person </li><li>Extensive hands-on experience with HV and LV electrical networks.</li><li>In-depth knowledge of switching schedules, isolation protocols, and operational safety rules.</li><li>Familiarity with operational safety documentation and relevant industry standards (e.g. EN 50110-1).</li><li>Strong communication and coordination skills, with the ability to work within multi-disciplinary teams.</li></ul>Why Join Our Client<ul><li>Work on world-class hyperscale data centre projects with leading global clients.</li><li>Competitive compensation package and accommodation/travel support </li><li>Opportunity for long-term engagement and career development within a growing international team.</li></ul>Visas can be provided for UK Citizens

Senior Authorised Person - Netherlands

Senior Authorised Person (SAP) – Hyperscale Data Centre Projects  We are seeking an experienced Senior Authorised Person (SAP) to join our clients team on cutting-edge hyperscale data centre projects in Belgium. This is an exciting opportunity to play a key role in the safe and efficient operation of HV/ MV and LV systems within one of the world’s fastest-growing infrastructure sectors. You will be responsible for implementing, supervising, and controlling all electrical switching operations, isolations, and energisation activities in accordance with project and client safety standards.  Key Responsibilities<ul><li>Manage and oversee HV/LV electrical operations, ensuring full compliance with safety rules and site procedures.</li><li>Prepare and execute switching schedules, isolation procedures, and testing protocols.</li><li>Issue and control safety documentation, including permits, limitations, and sanction-for-test.</li><li>Coordinate with design, construction, and commissioning teams to ensure system integrity.</li><li>Maintain a high standard of safety awareness and ensure adherence to EN 50110-1 and other relevant standards.</li><li>Provide guidance and training to authorised and competent persons as required.</li></ul>Requirements<ul><li>Proven experience working as a Senior Authorised Person (SAP)</li><li>SAP certification</li><li>Extensive hands-on experience with HV/MV and LV electrical networks.</li><li>In-depth knowledge of switching schedules, isolation protocols, and operational safety rules.</li><li>Familiarity with operational safety documentation and relevant industry standards (e.g. EN 50110-1).</li><li>Strong communication and coordination skills, with the ability to work within multi-disciplinary teams.</li></ul>Why Join Us<ul><li>Work on world-class hyperscale data centre projects with leading global clients.</li><li>Competitive compensation package and accommodation/travel support </li><li>Opportunity for long-term engagement and career development within a growing international team.</li></ul>

Senior Authorised Person - Belgium

Material Handling Manager – Power Plant Projects (USA) We are seeking an experienced Material Handling Manager to support large-scale power plant projects within the energy sector. This role is critical to ensuring the safe, compliant, and high‑quality control, storage, and movement of materials and equipment, including heavy-duty power generation components. Key Responsibilities<ul><li>Manage all site material handling activities across power plant construction and installation phases</li><li>Oversee inventory control for heavy-duty power plant equipment, including turbines, generators, auxiliaries, and balance-of-plant materials</li><li>Ensure materials are received, inspected, stored, preserved, and issued in accordance with project quality standards and OEM requirements</li><li>Coordinate logistics, warehousing, laydown yard operations, and interface with procurement, quality, and construction teams</li><li>Implement and maintain robust material tracking, documentation, and reporting systems</li><li>Ensure full compliance with quality plans, inspection & test plans (ITPs), and material traceability requirements</li><li>Manage non-conformance issues related to material damage, incorrect storage, or handling and support corrective actions</li><li>Enforce HSE, lifting, and quality procedures during all material handling activities</li><li>Identify risks related to material quality, preservation, or availability and implement mitigation plans</li></ul>Required Experience & Qualifications<ul><li>Proven experience as a Material Handling Manager on power plant or major industrial projects</li><li>Strong background supporting OEM-led projects</li><li>Demonstrated experience managing quality-critical and heavy-duty power generation equipment inventory</li><li>Solid understanding of material quality control, preservation standards, and documentation requirements</li><li>Experience working closely with QA/QC teams and supporting audits and inspections</li><li>Ability to work in a fast-paced, schedule-driven project environment</li><li>Strong communication and coordination skills across multiple stakeholders</li></ul>

Material Handling Manager - Texas

Commissioning Manager / Client Representative for Mission Critical – Data Centres EarthStream Global is currently hiring a Commissioning Manager / Client Representative to support the delivery of complex mission‑critical data centre projects. This role requires a commissioning professional with a strong background in Data Centre CX (Commissioning & Validation) who can act as a key interface between site teams, project teams, and the client, ensuring technical issues are identified early and resolved effectively. The position is both technical and oversight‑focused, with responsibility for commissioning execution, quality control, and quality assurance throughout the project lifecycle. Key ResponsibilitiesCommissioning & Client Representation <ul><li>Act as the Client Representative for all commissioning activities on site.</li><li>Lead and oversee Data Centre commissioning (CX) from early-stage planning through IST, validation, and handover.</li><li>Serve as the primary liaison between site teams, project management, vendors, and client/end‑user stakeholders.</li><li>Proactively identify commissioning risks, technical issues, or programme conflicts and drive resolutions.</li><li>Review and manage commissioning strategies, schedules, method statements, test scripts, and procedures.</li><li>Ensure systems are commissioned in line with design intent, client standards, and operational requirements.</li></ul>Quality Control & Quality Assurance <ul><li>Ensure all commissioning activities comply with the project Quality Management Plan.</li><li>Implement and monitor Quality Control (QC) procedures during commissioning and testing activities.</li><li>Carry out reviews of installation readiness, pre‑commissioning sign‑off, and test readiness.</li><li>Verify accuracy and completeness of commissioning documentation, test records, and close‑out deliverables.</li><li>Identify non‑conformances and coordinate corrective actions with construction, commissioning, and vendor teams.</li><li>Support audits, client inspections, and quality reviews related to commissioning and system validation.</li><li>Ensure handover documentation meets client QA/QC standards and operational acceptance criteria.</li></ul>Coordination & Reporting <ul><li>Facilitate communication between construction, commissioning agents, QA/QC teams, and client stakeholders.</li><li>Track progress against commissioning milestones and highlight risks to programme or quality.</li><li>Provide regular status updates, technical reports, and issue logs to the client and project leadership.</li><li>Support witnessing, validation, and acceptance testing activities.</li></ul>Required Experience & Qualifications<ul><li>Proven experience as a Commissioning Manager, Lead Commissioning Engineer, or Client Representative on mission‑critical data centre projects.</li><li>Strong expertise in Data Centre CX, including mechanical, electrical, controls, and Integrated Systems Testing (IST).</li><li>Demonstrated experience with quality control and quality assurance within commissioning environments.</li><li>Strong knowledge of critical infrastructure systems (HV/LV distribution, UPS, generators, cooling systems, BMS).</li><li>Experience representing the client or end user is highly desirable.</li><li>Excellent stakeholder engagement, problem‑solving, and communication skills.</li><li>Ability to work collaboratively on site and manage multi‑disciplinary teams.</li><li>Strong documentation, reporting, and organisational skills.</li></ul>

Commissioning Manager - Client Representative - Texas

Senior Site Safety & Health Specialist EarthStream Global are seeking a Senior Site Safety & Health Specialist to provide on-site safety leadership for commercial construction projects. This role is ideal for a local candidate with hands-on experience supporting complex, high‑risk builds. What You’ll Do<ul><li>Lead and enforce site-specific safety and health programs</li><li>Ensure compliance with OSHA and applicable safety regulations</li><li>Conduct job site audits, safety walk‑throughs, and risk assessments</li><li>Manage incident investigations, near misses, and corrective actions</li><li>Stop work when unsafe conditions exist and partner with project teams on resolutions</li><li>Deliver safety training and promote a zero-incident culture</li><li>Collaborate with clients, project teams, and subcontractor safety representatives</li><li>Maintain all safety documentation in an audit‑ready state</li></ul>Required Experience & Qualifications<ul><li>Experience on BESS, Substation, Power Generation, or Mission Critical (data center) projects required</li><li>Commercial building construction experience</li><li>7 years construction safety or construction management experience (education‑equivalent combinations accepted)</li><li>Strong knowledge of OSHA Construction & General Industry standards</li><li>OSHA 10‑Hour or 30‑Hour Construction Certification</li><li>Proficient in Microsoft Word, Excel, and PowerPoint</li><li>Valid driver’s license and ability to travel to local job sites</li><li>Ability to work flexible site schedules as required</li></ul>

Health & Safety Specialist - Georgia

Health & Safety Specialist - Texas

Health & Safety Specialist - Ohio

Quality Manager/Quality Engineer Electrical   Duration: 01/05/2026 – 30/04/2027 Location: Swindon, London (depending on the project) Type: Outside IR35   Your tasks as Quality Manager - Define and implement complex concepts, processes and methods for quality planning, assurance and control in line with the companies Quality Management Framework • Define and implement the project quality strategy under a risk-based approach, including planning and monitoring of quality resources and budgets • Setting the project quality objectives and relevant standards to be achieved • Communication and collaboration with all relevant project stakeholders • Carry out supplier qualification and assessment; continuous further development of supplier quality • Preparation of quality-related tender documents (e.g. quality assurance agreement), evaluation of offers and support in contract negotiations with suppliers Your tasks as Quality Engineer - Be the Quality Engineer on the Electrical Package for the Dogger Bank South Projects reporting to the Project Quality Manager, Project/Package Manager, and line organisation on the scope of delivery. • Project planning, co-ordination and control of quality activities for the Electrical Contractor their Manufacturers, Fabricators, Civil Contractors, Installers and their supply chains, with the support of the Offshore Substation Fabrication and Civil Quality Engineers. • Implement contractual and corporate quality and technical requirements within the project package. • Plan and manage the production/installation monitoring and inspection of equipment at manufacturing plants, fabrication sites, onshore and offshore sites from design to handover to O&M/OFTO with all deliverables and checks. • Co-ordinate multi-disciplined teams of inspectors managed by the Quality Manager both onshore and offshore in the delivery of scope of works. • Evaluation of reports, inspection results and findings from Contractor and Employer Systems. • Capture all work progress, inspections, and non-conformities (NC) in the client's Quality inspection app and monitor and report on compliance and progress of work. Assess non-conformities, conduct root cause analysis and follow-up of correction and corrective action process. • Manage Document Deliverables to acceptance ready for handover to O&M/OFTO • Prepare tender documents (e.g., quality assurance agreements), evaluate tender returns, and support contract negotiations with suppliers as required. • Plan/conduct general quality monitoring/audits. • Perform supplier qualification and assessment and continuously develop supplier quality. • Collaborate with Project Quality Manager to identify and manage risks within the Projects. Your profile - Successfully completed university degree or significant experience with a (HNC/HND) in an HV Electrical Engineering Environment (or in a comparable field) as well as additional qualifications as quality auditor, quality manager or comparable. • Relevant professional experience and expertise in quality assurance, control/monitoring and management as well as comprehensive expertise in offshore wind farm components in general and substation electrical components in particular. • Extensive knowledge in the application of relevant international project and quality management standards as well as technical regulations and standards such as IEC, BSH, DNV, BS/EN/ISO and NORSOK etc. • Practical experience from the construction and/or manufacturing industry with a good understanding of OEM HVDC, electrical components and the Supply Chain. • Able to demonstrate a good understanding of quality requirements and risks in onshore and offshore environment and the associated standards. • Business fluent in written and spoken English with a very good knowledge of common IT tools and systems. • Motivation to independently and sustainably advance your cause and the ability to keep an overview at all times in hectic project business. • You are an empathetic, reliable and motivated team player with a willingness to travel in accordance client Travel Policies in delivery of scope of work.

Quality Manager

Role Summary As a Project Coordinator / Work Planner, you are responsible for ensuring that all preparatory activities are completed so that projects and operational works can start and finish smoothly, safely, and in accordance with agreements. You act as the central point of coordination and control within the project team, where all project information comes together. Key Responsibilities <ul><li>Monitoring and reporting on integrated project quality across all project control aspects (GROTIK: Scope, Risk, Organization, Time, Information, Cost), acting as the “conscience” of the project team</li><li>Supporting the Project Manager in preparing:<ul><li>Project management meetings</li><li>Periodic progress and accountability meetings with the Lead</li></ul></li><li>Preparing and updating monthly and quarterly financial forecasts, including:<ul><li>Cashflow</li><li>ETC (Estimate to Complete)</li><li>EAC (Estimate at Completion)</li><li>Substantiating deviations from the approved budget</li></ul></li><li>Preparing, maintaining, and updating project schedules to ensure contractual milestones and final commissioning dates are met</li><li>Developing and maintaining internal resource planning per project and processing this in relevant systems</li><li>Preparing, updating, and monitoring project risk registers</li><li>Managing internal documentation together with the Document Controller, including:<ul><li>Contract documentation</li><li>Requests for Change (RFC)</li><li>Requests for Acceptance (RFA)</li><li>Monitoring review and approval timelines with contractors</li></ul></li><li>Monitoring Owner-Supplied Goods (client-direct supplies) delivered to contractors</li></ul>Candidate Profile Education & Experience <ul><li>HBO-level education or equivalent working and thinking level</li><li>5–10 years of recent experience in roles such as:<ul><li>Work Planner</li><li>Project Coordinator</li><li>Project Controls Manager</li></ul></li><li>Experience in infrastructure or technically oriented organizations, preferably within the energy sector</li></ul>Skills & Competencies <ul><li>Familiarity with project control systems for managing:<ul><li>Cost</li><li>Planning</li><li>Risk</li><li>Documentation (Within TenneT: IFS, Primavera, ARM, Meridian)</li></ul></li><li>Strong communication and negotiation skills</li><li>Excellent organizational, planning, and prioritization abilities</li><li>Professional, analytical, flexible, and able to work independently</li><li>Strong stakeholder awareness and organizational sensitivity</li><li>Proven ability to collaborate effectively with:<ul><li>Project Managers</li><li>Project team members</li><li>Internal and external stakeholders</li></ul></li><li>Preferred (not mandatory):<ul><li>Experience with different contract types (Specifications / Bestek, UAV, UAV‑GC)</li><li>Systems-Oriented Contract Management</li><li>Project management methodologies such as PRINCE2 or IPMA</li></ul></li><li>Full professional proficiency in Dutch and English (spoken and written), due to contractor communication requirements</li></ul>Important Information <ul><li>Primary workplace schedule:<ul><li>2 days per week in Hoogeveen (preferably Monday and Tuesday)</li><li>2 days per week in Eemshaven (Thursday mandatory)</li><li>1 day per week remote (home office)</li></ul></li></ul>

Project Coordinator / Work Planner

As a Lead Engineer, you are responsible for the technical integrity of projects throughout the execution phase: <ul><li>Requesting and coordinating discipline engineers and managing their technical input</li><li>Leading the assessment of contractor documentation and taking responsibility for all technical aspects of projects</li><li>Active involvement in project realization, from detailed design through commissioning, with frequent presence on-site</li><li>Maintaining close contact with internal and external stakeholders, including regional grid operators and contractor engineers</li><li>Supporting and advising during the tendering, design, and execution phases</li><li>Reviewing and approving:<ul><li>Technical specifications</li><li>Work packages</li><li>Drawings and calculations</li></ul></li><li>Working with multiple contract types, including traditional contracts, UAV, and UAV-GC</li></ul>Candidate Profile Education & Experience <ul><li>Bachelor’s or Master’s degree in Electrical Engineering or Energy Technology</li><li>Minimum 5 years’ experience in high-voltage engineering (≥110 kV), including substations<ul><li>Alternatively:<ul><li>Minimum 3 years of relevant experience for experienced engineers</li><li>Engineers with experience from ≥10 kV networks are also eligible</li></ul></li></ul></li></ul>Skills & Competencies <ul><li>Strong leadership or coordination capabilities (not mandatory for experienced engineers)</li><li>Analytical, structured, and able to maintain a helicopter view</li><li>Strong communication skills and resilience under time pressure</li><li>Experience with project-based working methods (e.g. PRINCE2, IPMA)</li><li>Knowledge of and experience with:<ul><li>Contract forms (Specifications, UAV, UAV-GC)</li><li>Systems-Oriented Contract Management</li><li>Systems Engineering</li><li>Requirements management tools such as Relatics</li></ul></li><li>Full professional fluency in Dutch (mandatory)</li></ul>

Lead Engineer

About the Role We are seeking an experienced Construction Manager to lead the delivery of substation construction projects across the United States. This role is critical to the successful execution of high‑voltage electrical infrastructure projects supporting utilities, renewable integration, and grid modernization. The Construction Manager will oversee all site‑based activities, ensuring projects are delivered safely, on schedule, and in compliance with technical, regulatory, and quality standards. This position offers the opportunity to work on complex, high‑impact power projects in a growing market sector. Key Responsibilities<ul><li>Manage on‑site construction activities for new‑build and expansion substation projects (distribution, transmission, and high‑voltage)</li><li>Coordinate civil, structural, electrical, and commissioning works across multiple contractors and trades</li><li>Oversee project schedules, field budgets, quality control, and daily construction operations</li><li>Enforce strict compliance with OSHA, company safety policies, and utility safety standards</li><li>Lead subcontractor coordination meetings and resolve site issues proactively</li><li>Ensure adherence to construction drawings, technical specifications, and approved methods</li><li>Support testing, energization, and close‑out activities in coordination with utility stakeholders</li><li>Maintain accurate progress reporting and communicate risks, delays, or changes to project leadership</li></ul>Required Qualifications<ul><li>7 years of construction management or supervisory experience within substation or power infrastructure projects</li><li>Strong understanding of high‑voltage systems, substation construction sequencing, and electrical safety practices</li><li>Proven experience working with utilities, EPC contractors, or heavy civil/electrical contractors</li><li>Demonstrated ability to manage multiple subcontractors and complex site logistics</li><li>Excellent leadership, communication, and problem‑solving skills</li><li>Familiarity with US electrical codes, standards, and utility requirements</li><li>Willingness to travel or relocate to project sites as required</li></ul>Preferred Qualifications<ul><li>Bachelor’s degree in Construction Management, Engineering, or related field</li><li>Experience with transmission & distribution (T&D) or renewable interconnection projects</li><li>OSHA 30 certification</li><li>Proficiency with construction management software (e.g., Procore, Primavera P6, MS Project)</li><li>Working knowledge of commissioning and energization processes</li></ul>

Construction Manager - Substations 

About the Role We are seeking an experienced Construction Manager to lead the delivery of substation construction projects across the United States. This role is critical to the successful execution of high‑voltage electrical infrastructure projects supporting utilities, renewable integration, and grid modernization. The Construction Manager will oversee all site‑based activities, ensuring projects are delivered safely, on schedule, and in compliance with technical, regulatory, and quality standards. This position offers the opportunity to work on complex, high‑impact power projects in a growing market sector. Key Responsibilities<ul><li>Manage on‑site construction activities for new‑build and expansion substation projects (distribution, transmission, and high‑voltage)</li><li>Coordinate civil, structural, electrical, and commissioning works across multiple contractors and trades</li><li>Oversee project schedules, field budgets, quality control, and daily construction operations</li><li>Enforce strict compliance with OSHA, company safety policies, and utility safety standards</li><li>Lead subcontractor coordination meetings and resolve site issues proactively</li><li>Ensure adherence to construction drawings, technical specifications, and approved methods</li><li>Support testing, energization, and close‑out activities in coordination with utility stakeholders</li><li>Maintain accurate progress reporting and communicate risks, delays, or changes to project leadership</li></ul>Required Qualifications<ul><li>7 years of construction management or supervisory experience within substation or power infrastructure projects</li><li>Strong understanding of high‑voltage systems, substation construction sequencing, and electrical safety practices</li><li>Proven experience working with utilities, EPC contractors, or heavy civil/electrical contractors</li><li>Demonstrated ability to manage multiple subcontractors and complex site logistics</li><li>Excellent leadership, communication, and problem‑solving skills</li><li>Familiarity with US electrical codes, standards, and utility requirements</li><li>Willingness to travel or relocate to project sites as required</li></ul>Preferred Qualifications<ul><li>Bachelor’s degree in Construction Management, Engineering, or related field</li><li>Experience with transmission & distribution (T&D) or renewable interconnection projects</li><li>OSHA 30 certification</li><li>Proficiency with construction management software (e.g., Procore, Primavera P6, MS Project)</li><li>Working knowledge of commissioning and energization processes</li></ul>

Construction Manager - Substation 

About the Role We are seeking an experienced Construction Manager to lead the delivery of complex, mission‑critical construction projects across the United States. This role will play a key part in managing high‑value, fast‑paced projects where safety, quality, and schedule adherence are critical to success. You will oversee site operations from pre‑construction through close‑out, working closely with owners, designers, subcontractors, and internal teams to ensure world‑class project delivery in environments where uptime and reliability are paramount. Key Responsibilities<ul><li>Lead on‑site construction activities for mission‑critical projects, including data centers and other critical facilities</li><li>Manage project schedules, budgets, quality controls, and safety performance</li><li>Coordinate subcontractors, vendors, and suppliers to ensure project milestones are achieved</li><li>Enforce compliance with OSHA regulations, company safety standards, and site‑specific requirements</li><li>Collaborate with project managers, engineers, and commissioning teams to support seamless project delivery</li><li>Review construction documents, RFIs, submittals, and change orders</li><li>Maintain clear communication with stakeholders, providing regular progress and risk updates</li><li>Support commissioning, turnover, and close‑out processes</li></ul>Required Qualifications<ul><li>Minimum 7–10 years of construction management experience, with significant exposure to mission‑critical or complex technical projects</li><li>Proven experience managing large‑scale projects in live or high‑reliability environments (data centers highly preferred)</li><li>Strong knowledge of construction means and methods, sequencing, and cost controls</li><li>Excellent leadership, communication, and problem‑solving skills</li><li>Thorough understanding of US construction codes, standards, and OSHA safety requirements</li><li>Ability to travel or relocate to project sites as required</li></ul>Preferred Qualifications<ul><li>Bachelor’s degree in Construction Management, Engineering, or a related discipline</li><li>Experience delivering data center projects for hyperscale, colocation, or enterprise clients</li><li>Proficiency with construction management software (e.g., Procore, P6, MS Project)</li><li>OSHA 30 certification (or higher)</li></ul>

Construction Manager - Mission Critical 

Daniel joins our Renewable Energy team as a Delivery Consultant.

Daniel Bentley

Delivery Consultant

Offshore Operations Support Duration: 15-Jul-2026 - 28-Feb-2027 Business Unit: Construction Rotation: 4/4 or 2/2 (12 hours a day) Location: Rhode Island USA Description: Responsibilities • Coordinate activities onboard the vessel, scheduling team drop off and pickup times • Align onboard activities with logistics planning team, and report into Offshore Site Manager • Arrange meetings and liaise with project stakeholders • Ensure adherence to project procedures, processes, and IT Tools. • Support HSE when required. • Operate the Offshore management system and provide lessons learnt/change requests. • Participate in general lessons learned. Tasks • Primary contact on board the vessel to manage coordination between contractors and operational activities • Work directly with offshore site manager to enforce project policies and maritime laws. • Maintaining a safety presence and acting within HSE requirements compliance with PPE policies, work with HSE team members on findings, investigations and safety pushes. • Ensure adherence to project specific offshore access process. • Planning & Coordination of Constructions daily onboard activities • Liaison between coordination teams, offshore technicians, and vessel crews • Liaison with the Packages & Contractors to keep operational conflicts to a minimum • Liaison with Marine coordination for execution of planned activities • Daily dialogue with relevant Contractors & Vessels to ensure compliance with site procedures and OMS • Assisting site manager with tasks as required • Chair / attend interface and kick off meetings with contractors. • Ensuring personnel are approved within OMS providing personnel forecast to ensure operational needs are met • Assistance in POB lists and offshore certification requirement checking • Tracking and control of all cargo going offshore, including declarations to relevant agents and authorities. Deliverables • SOMS Training Documents • Vessel/Helicopter performance reports • Daily coordination & Execution plan Requirements: Mandatory Qualification / Requirements • Knowledge of vessel and personnel logistics in dynamic offshore environments, with preference to experience in offshore wind farm operations. Mandatory: • GWO courses: Sea Survival, Working at Heights, First Aid, Fire Awareness, Manual Handling. • BOSIET/HUET incl. CA-EBS • OGUK Medical certificate incl. Chester Step *Travel expenses will be covered as per agreement with the Project

Offshore Operations Support

APPLY FOR THIS JOB

Daniel Bentley