Offshore HV Senior Authorized Person North Sea, Offshore Germany 02/02/2026 – 31/08/2026 Scope of Work: <ul><li>Work alongside the Electrical Systems Package site representatives and Client Commissioning Team to assist in delivering the hot commissioning activities as Clients Engineer, driving the work scope forward on site to meet the project programme.</li><li>Client witness and sign off for Stage 1 and Stage 2 completion for Substations</li><li>Provide technical support for Project Senior Authorised Persons and M&E Engineers.</li><li>Reporting to the Commissioning Manager (Lead)</li><li>Based principally in the Jack-Up Vessel following installation of the assets offshore. Alternatively, limited work period in the onshore construction yard before Load-Out.</li><li>Initial investigation and reporting of incidents</li><li>Plan, document and perform switching operations (66 kV – 155 kV) at offshore substations, export cables, and wind turbines in line with RWE HV Safety Rules.</li><li>Manage the Permit to Work (PTW) system – Permit request and approval,.</li><li>Carry out fault diagnosis and troubleshooting on offshore HV equipment.</li></ul> Deliverables: <ul><li>Weekly reporting and record keeping on progress and issues to the Commissioning Manager (Lead)</li><li>Liaise with Engineering and Quality Departments to ensure Outstanding Engineering/Quality Issues are resolved.</li><li>Interface with the IAC team, OSS team and WTG team.</li><li>Elaboration of Switching Plan and HV Switching Schedules.</li><li>Responsible for revisionof accurate ‘As Built’ Drawings and Records produced by Contractors.</li></ul> Certifications: <ul><li>Relevant technical education in an electrical engineering discipline</li><li>Certified Switching Operator (Schaltberechtigter) or eligibility to be certified with the corresponding training.</li><li>GWO basic safety training</li><li>GWO Enhanced First Aid Training (Ersthelfer Offshore DGUV)</li><li>Helicopter Underwater Escape Training (HUET)</li><li>Offshore medical fitness</li><li>Other requirements:</li><li>Proven experience as Senior Authorized Person in MV/HV assets (Client or Contractor role)</li><li>Knowledge of testing Alarms/Controls/Indications from a range of MV/HV Equipment</li><li>Knowledge of commissioning of LV/MV/HV Switchgear and associated components.</li><li>Knowledge of GE/Hitachi protection relays including IEC61850/Goose communications is desirable.</li><li>Experience of BMS Systems is desirable</li><li>Understanding of HV Safety Rules.</li><li>Self-starting with planning/coordination and problem solving abilities.</li><li>Fluent written and verbal English with good communication skills.</li><li>Broad knowledge of HV/MV equipment operations combined with commissioning experience.</li><li>Eligibility to be nominated as Electrical Person in Charge of the Electrical Installation</li></ul>

Offshore HV Senior Authorised Person

Commissioning Manager – Data Centres We are seeking an experienced Commissioning Manager to join a collaborative, high-performing project team delivering complex data centre projects. This role offers the opportunity to work alongside highly skilled, culturally diverse professionals in an environment that values trust, ownership, and shared success. You will be empowered to take real responsibility for the commissioning process, play a key role in project delivery, and continue to grow your technical and leadership capabilities within a challenging and rewarding environment. Key Responsibilities<ul><li>Attend key project meetings to monitor progress, collaborate on problem solving, and clearly communicate impacts to stakeholders</li><li>Conduct site inspections to review QA/QC compliance and commissioning activities</li><li>Develop, implement, and manage the project commissioning strategy and procedures</li><li>Drive the commissioning process, including scope definition, scheduling, and execution</li><li>Review and apply best practices to deliver quality, cost-effective commissioning solutions</li><li>Communicate commissioning progress related to scope, schedule, and budget to senior stakeholders</li><li>Oversee vendor performance to ensure high-quality delivery</li><li>Facilitate coordination meetings with vendor and contractor project managers</li><li>Identify and manage interfaces, dependencies, timelines, and budgets across multiple stakeholders</li><li>Proactively identify issues and work collaboratively to resolve them</li><li>Oversee and manage client-appointed commissioning teams</li><li>Work independently in support of a wider data centre commissioning program</li></ul>About You<ul><li>Strong technical understanding of UPS systems, switchgear, generators, and critical mechanical systems</li><li>Proven experience developing detailed commissioning scripts</li><li>Demonstrated experience project managing data centre projects</li><li>Degree or equivalent experience in project management, engineering, construction, or a related discipline</li><li>A collaborative mindset with the ability to build strong relationships with teams and clients</li><li>Comfortable working in a fast-paced environment with multiple priorities</li></ul>

Commissioning Manager

Position Overview We are seeking a qualified Inspector to provide on-site quality oversight for the manufacturing and final preparation of UF6 (Uranium Hexafluoride) cylinders. T The inspector will witness critical operations, ensure compliance with nuclear industry standards, and verify adherence to client-specified procedures. This role requires strict attention to detail, safety consciousness, and technical expertise in pressure vessel inspection. Primary Responsibilities 1. Internal Cleanliness Inspection • Witness and verify cylinder internal cleanliness compliance with ANSI N14.1 / ISO 7195 standards 2. Component Installation Oversight • Witness valve and plug installation immediately following internal inspection per latest Westerman procedure (client-released version) • Verify applied torque values align with WNTI GPG – Installation of valves and plugs in UF6 cylinders 3. Leak Testing & Sealing • Witness leak testing of threaded connections, valve seats, and packing per latest Westerman work instructions (client-released version) • Witness final sealing of valves and plugs per client instruction UG-LOG-Inst-02 4. Nonconformance Management • Document and report all deviations immediately to both Client and fabricator • Verify Client acceptance of nonconforming conditions before fabricator implements corrective actions 5. Reporting • Prepare and submit bi-weekly Source Inspection Reports detailing: o Equipment inspected (by serial/unit numbers) o Inspection activities performed o Results and acceptance status o Any deviations or corrective actions taken Required Qualifications • High School Diploma or equivalent (minimum); Technical/Engineering degree preferred • Certified Welding Inspector (CWI) or ASNT NDT Level II certification (or equivalent) strongly preferred • Minimum 3-5 years of experience in: o Pressure vessel inspection o Nuclear/uranium processing equipment o Chemical/Nuclear cylinder manufacturing • Proven experience with ANSI, ISO, and nuclear industry standards • Familiarity with torque verification, leak testing, and sealing procedures Essential Skills • Strong understanding of quality assurance/quality control (QA/QC) principles • Ability to read and interpret technical drawings, procedures, and specifications • Proficiency in technical report writing • Basic computer skills (Microsoft Office, report templates) • Excellent communication and interpersonal skills for vendor-client liaison

Pressure Vessel Inspector

My client has subcontracted the cable pulling works for the land cable part of their project in Germany. 1 Cable Pulling Surveyor will be required on site to follow and survey the cable pulling activities Function: Follow and survey the cable pulling works on site for the installation of the land cables for project work in Germany Purpose: <ul><li>Ensure that the cable pulling works are done in accordance with existing procedures, specifications and permits</li><li>Ensure that the cable pulling works are executed according to the contractual specifications</li></ul> Areas of Responsibility: <ul><li>Follow and survey the cable pulling activities</li><li>Follow and survey the inspection activities related to cable pulling</li><li>Support on HSE topics related to cable pulling</li><li>Report on a daily basis on the progress and status of the cable pulling works and on the observations made</li><li>Follows risks, incidents, issues and actions related to able pulling works</li><li>Support the Project Manager, Site Manager regarding technical questions</li><li>Support the project claim management with technical explanations and information</li><li>Work and support on project documents related to cable pulling works</li><li>Support the procurement process with technical input</li></ul>Competencies and Qualification: <ul><li>Experience in cable pulling works or similar works</li><li>Experience in High Voltage Land cable installation projects</li><li>Readiness to work on construction site</li><li>Knowledge of standard IT-tools (Word, Excel, Windows…)</li><li>Driving license</li><li>Speaking German and English</li></ul>For more information, do not hesitate to get in touch!

Cable Pulling Surveyor

Deputy Technical Project Director – Electrical – DC Projects! Earthstream is currently partnered with an international business that delivers large-scale turnkey Data Centre projects, who are looking for an experienced Deputy Tech Director (Electrical) to join the team. As Deputy Technical Director you will play a key expert role within the Technical Department, coordinating stakeholders, managing technical exchanges with clients, and acting as a trusted technical representative on projects. Key Responsibilities: During the Commercial / Tender Phase For projects with a strong design component, you will be responsible for: <ul><li>De-risking projects from a technical standpoint</li><li>Defining study priorities and engineering strategies</li><li>Managing external engineering resources where necessary</li><li>Defining the optimal study path to meet cost, schedule and technical objectives</li><li>Acting as the customer’s trusted technical interlocutor</li><li>Negotiating and contractually qualifying technical aspects of the project</li></ul> During the Execution Phase On large-scale or technically critical projects, you may act as Technical Assistant to the Project Director, with responsibilities including: <ul><li>Close collaboration with Design Managers</li><li>Identification of technical risks and bottlenecks</li><li>Proposal and implementation of technical solutions</li><li>Involvement throughout the full project lifecycle, from design to commissioning</li></ul> Your Profile <ul><li>Engineering degree, ideally Electrical or equivalent)</li><li>15 years of experience in the electrical field</li><li>Recognised technical expert in electrical standards and regulations</li><li>Strong expertise in electrical distribution design</li><li>Strong adaptability and problem-solving skills</li><li>Ability to coordinate complex technical topics and multiple stakeholders</li><li>High level of rigor, flexibility, and professional curiosity</li><li>Excellent teamwork and interpersonal skills</li><li>Fluent technical English, enabling effective communication with international partners and clients during tender and project phases</li></ul>Please get in touch asap to be considered!

Deputy Technical Project Director

Mechanical Project Manager - Data Centre Projects - Paris Earthstream is currently partnered with an international business that delivers large-scale turnkey Data Centre projects, who are looking for an experienced Mechanical Project Manager (HVAC) to join the team. Reporting to the Head of the Technical Department, you will focus on the development of technical and financial studies for data centre construction projects, covering HVAC (CVC), Smoke extraction, and Plumbing. You will be responsible for leading and coordinating project bidding activities, proposing technical and economic variants, drafting the technical and methodological sections of commercial offers, and managing a project team of 2/3 people. You will also liaise with external partners and clients’ technical teams throughout the bidding and design phases. Essential skills and experience: <ul><li>Engineering Degree - HVAC / Mechanical / Building Services or equivalent)</li><li>10 years’ experience in ventilation/HVAC systems</li><li>Strong knowledge of HVAC standards, technical regulations, system design</li><li>Ability to coordinate complex technical topics and multiple stakeholders</li><li>Strong teamwork, interpersonal and managerial skills</li><li>Fluent technical English, enabling effective communication with partners and customers during bidding phases</li><li>Knowledge of AutoCAD, Revit and Quick Devis 7 is a plus</li></ul>Get in touch asap to be considered!

Mechanical Project Manager 

WTG Fabrication Supervisor Duration: 01-May-2026 - 31-Jul-2027 Business Unit: Engineering Category Name: WTG Fabrication Supervisor Type: Inside IR35 Description: 1. Role objective <ul><li>Monitor quality and progress of (WTG) Blades at WTG Supplier’s factory in Hull, UK</li></ul> 2. Responsibilities <ul><li>Witness the supplier works</li><li>Witness the supplier's inspection activities</li><li>Follow-up on manufacturing progress (via Manufacturing Inspection Plan and project related plans of P/D Dates and shipments)</li><li>Report non-conformities and observations</li></ul> 3. Tasks <ul><li>Participate in final inspections (paint & add on) and final tagging</li><li>Monitor production activities and production documentation as spot checks</li><li>Monitor product quality and participate in FAI activities</li><li>Report non-conformities detected during inspection and manufacturing (Clients Digital Inspection tool)</li><li>Report relevant quality issues in Client NCR system (i.e. Synergi)</li><li>Follow-up on preservation and maintenance of components at supplier's storage area</li><li>Follow-up on manufacturing progress according to agreed project manufacturing schedule (MIP)</li><li>Keep track of trend concerning repeated non-conformities and manufacturing errors and follow-up with the supplier concerning corrective and preventive actions</li><li>Documentation of daily work and inspections to WTG Fabrication & Quality Manager</li><li>Prioritise participation in inspection for different Add on components according to failure trends and criticality of failures</li><li>Check of CTQs according to Digital inspection tool e.g LEP- VG – DT- Paint- LPS-LOPC</li><li>Review quality related as-built documentation</li><li>Highlight relevant HSE related issues</li></ul> 4. Deliverables <ul><li>Inspection and manufacturing reports</li><li>Non-conformity (Synergi) reports</li></ul> 5. Working schedule <ul><li>8 hours/day</li><li>5 days per week</li><li>Possible night shifts are expected (3 to 10 per month)</li></ul> 6. Additional comments <ul><li>Consultant should bring own PPE (Personal Protection Equipment) needed to perform the work and flashlight</li><li>Consultant should preferably live close to the blade manufacturing site</li><li>Work on weekend is not planned, but might become relevant as an exception</li><li>Access and work restrictions, e.g., due to HSE requirements, may exceptionally be applied by the supplier at their site, limiting chargeable workdays</li><li>Requirements:</li></ul> 7. Qualifications <ul><li>Technical education relevant for the subject matter.</li><li>Recommended 3 years of work experience within wind /manufacturing of blades</li><li>Recommended 1 year of experience from similar position</li><li>Good knowledge of Microsoft Office programmes and smart phone applications for digital inspections</li></ul> 8. Language skills <ul><li>Good English skills in writing and speaking</li></ul> 9. Soft skills <ul><li>Adaptable, works well in teams, strong communication abilities</li><li>Capable of establishing trustful relationship</li><li>Proactive</li><li>Self-driven</li><li>Hands on experience</li><li>Polite and calm by nature</li><li>Cooperative</li><li>Safety conscious</li><li>Quality conscious</li></ul>

WTG Fabrication Supervisor

Commissioning Supervisor – Solar PV Project Position Summary Responsible for supervising and coordinating commissioning and energization activities, ensuring the plant is safely tested, commissioned, and handed over in compliance with contractual and grid requirements. Key Responsibilities <ul><li>Review and implement commissioning plans, procedures, and schedules.</li><li>Coordinate pre-commissioning and commissioning activities with EPC and grid operator.</li><li>Supervise functional testing, performance testing, and energization.</li><li>Ensure all commissioning documentation and test records are completed.</li><li>Support resolution of commissioning issues and punch-list items.</li><li>Assist with final handover and readiness for commercial operation.</li></ul>Minimum Qualifications & Experience <ul><li>Degree or diploma in Electrical or Power Engineering.</li><li>5 years’ experience in commissioning of Solar PV or power plants.</li><li>Experience with grid compliance testing and performance testing.</li><li>Strong coordination and reporting skills.</li></ul>Site Presence Options <ul><li>Resident option: Full-time during commissioning phase</li><li>Ad-hoc option: Mobilized during defined commissioning windows</li></ul>

Commissioning Supervisor – Solar Project

Electrical Supervisor – Solar PV Project Position Summary The Electrical Supervisor will oversee electrical installation activities including DC, AC, inverters, transformers, MV/LV systems, and grid connection works. Key Responsibilities <ul><li>Supervise electrical works in accordance with approved drawings and standards.</li><li>Ensure correct installation of PV strings, combiner boxes, inverters, transformers, and cabling.</li><li>Verify testing activities (continuity, insulation resistance, functional tests).</li><li>Ensure compliance with quality plans, ITPs, and safety requirements.</li><li>Coordinate with commissioning activities and support punch-list closure.</li><li>Maintain accurate inspection and testing records.</li></ul>Minimum Qualifications & Experience <ul><li>Degree or diploma in Electrical Engineering.</li><li>5 years’ experience in Solar PV or power projects.</li><li>Strong knowledge of PV electrical systems and grid interconnection.</li><li>Experience in site inspections, testing, and documentation.</li></ul>Site Presence Options <ul><li>Resident option: Full-time on site</li><li>Ad-hoc option: Attendance during electrical installation and testing phases</li></ul>

Electrical Supervisor – Solar Project

Civil / Mechanical Supervisor – Solar PV Project Position Summary Responsible for supervising civil and mechanical construction activities to ensure works are executed in accordance with drawings, specifications, quality standards, and project schedule. Key Responsibilities<ul><li>Supervise civil works (earthworks, foundations, roads, drainage) and mechanical installations (mounting structures, trackers).</li><li>Verify works against approved drawings, method statements, and ITPs.</li><li>Coordinate daily activities with contractors and report progress/issues.</li><li>Ensure quality control checks and inspections are completed and documented.</li><li>Support resolution of technical issues and construction non-conformities.</li><li>Coordinate with Electrical and Commissioning teams to ensure interface alignment.</li></ul>Minimum Qualifications & Experience<ul><li>Degree or diploma in Civil or Mechanical Engineering.</li><li>5 years’ experience in energy or Solar PV construction projects.</li><li>Experience with large-scale PV mounting systems and civil works.</li><li>Good understanding of construction quality control and site documentation.</li></ul>Site Presence Options<ul><li>Resident option: Full-time on-site</li><li>Ad-hoc option: Site attendance during critical civil/mechanical phases</li></ul>

Civil / Mechanical Supervisor – Solar Project

HSE Supervisor – Solar PV Project Position Summary The HSE Supervisor is responsible for implementing and monitoring Health, Safety, and Environmental (HSE) requirements on site to ensure compliance with project standards, Moroccan regulations, and international best practices. Key Responsibilities<ul><li>Implement and enforce the Project HSE Plan.</li><li>Conduct site inspections, toolbox talks, and safety inductions.</li><li>Monitor contractor compliance with HSE procedures and permits to work.</li><li>Report incidents, near misses, and unsafe conditions; support investigations and corrective actions.</li><li>Ensure environmental controls are implemented (waste management, dust, noise, spill prevention).</li><li>Maintain HSE records, statistics, and reporting.</li><li>Liaise with Site Manager and Client on HSE performance.</li></ul>Minimum Qualifications & Experience<ul><li>Technical diploma or degree (Engineering, HSE, or related discipline).</li><li>Minimum 5 years’ experience in energy or Solar PV construction projects.</li><li>Strong knowledge of construction site HSE risks and controls.</li><li>Familiarity with international standards (ISO 45001 / ISO 14001 preferred).</li><li>HSE certifications (NEBOSH, IOSH, or equivalent) are an advantage.</li></ul>Site Presence Options<ul><li>Resident option: Full-time on site</li><li>Ad-hoc option: Periodic site visits based on project needs</li></ul>

HSE Supervisor – Solar Project

Site Manager – Solar PV Project (Resident) Position Summary The Site Manager will act as the overall on-site representative, responsible for managing construction activities, coordinating contractors, and ensuring compliance with project schedule, quality, HSE, and contractual requirements. This is a 100% resident position. Key Responsibilities<ul><li>Full responsibility for day-to-day site management of the Solar PV project.</li><li>Coordinate and supervise all site activities including civil, mechanical, electrical, and commissioning works.</li><li>Act as the primary interface with EPC contractors, subcontractors, Owner’s Engineer, and Client.</li><li>Ensure compliance with approved drawings, specifications, quality plans, and HSE requirements.</li><li>Monitor construction progress and support schedule recovery actions where required.</li><li>Lead site coordination meetings and report progress, risks, and issues to Project Management.</li><li>Ensure site documentation, daily reports, NCRs, RFIs, and progress records are properly managed.</li><li>Support handover activities and readiness for commissioning and commercial operation.</li></ul>Minimum Qualifications & Experience<ul><li>Bachelor’s degree in Engineering (Civil, Electrical, Mechanical, or equivalent).</li><li>8–10 years’ experience in energy projects, preferably Solar PV.</li><li>Strong experience in site construction supervision, contractor coordination, and quality control.</li><li>Proven leadership on utility-scale or large infrastructure projects.</li><li>Strong reporting and stakeholder management skills.</li></ul>Site Presence<ul><li>100% resident on site (mandatory)</li></ul>Commercial Note All-inclusive resident daily/monthly rate to cover: salary/fee, accommodation, transport, per diem, insurance, taxes, and mobilisation.

Site Manager – Solar Project 

QHSE Officer Duration: 01/02/2026 – 31/03/2026 Location: UK Waters Project: NNG Project Type: Outside IR35   Description: DEME's objective is to provide a healthy work environment, to promote sound work practices and a healthy lifestyle for everyone involved in our business. QHSE is therefore one of the supportive departments that is involved in all Quality, Health, Safety and Environmental matters on our projects, vessels, and in HQ. As a project QHSE engineer you will be part of the team that is on site on one of our offshore projects worldwide, responsible for the maintenance and control of QHSE-S practices on site, as well as inspecting all activities and equipment to reassure proper operation and implementation of procedures. Primary Tasks and responsibilities: -Project QHSE reporting, KPI and communications with Project management and vessel -Participating in meetings and toolboxes onboard and on site -Investigation incidents & non-conformities -Engage the supervisors and workforce to actively participate in HSE matters and campaigns -Carry out HSE inspections on the work floor and ensure proper reporting, communication and follow-up of the findings -Management SHOC cards on board/on site Technical profile requirements: -Provide support to the project team for all QHSE related matters -Ensure that personnel use the latest versions of PQMP, PHSEMP, ITP, MST, RA, etc. Non-Technical profile requirements: -Strong communication skills -Good knowledge & experience with MS Office -Good command of English, both written and spoken - any other languages are a plus Methodology/Certification requirements: -MSC/MSc Degree in Civil Engineering, Mechanic Engineering, Chemical Engineering OR equivalent through experience OR MSc Degree Safety Engineering, prevention advisor level 1

QHSE Officer

Onshore Substation Package Manager   Period - 16/01/2026 to 01/03/2027 Business Unit - Package Management Electrical (OTC-CE) Rotations – Monday-Friday Type – Freelance contract outside IR35 Rate - £800 a day   Location: Swindon office, London Project Office, Coventry Office or Necton Onshore Substation, Swaffham, Norfolk. PE37 8EG. Travel also required to these sites as required for the works.   Description: The role will safely deliver all aspects of the design, contracting, construction and handover to operations of the Onshore Substation Package • As the Onshore Substation Package Manager you will safely deliver the Onshore Substation and connection to the national electricity transmission network including substation design, supply, installation and commissioning, and liaison with the RWE 400kV package Manager Grid/TSO and other authorities as required. You will ensure the package equipment is developed and integrated fully into the wider electrical system including the offshore substations, offshore cables and landfall infrastructure and handed over with all documentation complete as required. • Deliver the electrical system, procurement and project management of the electrical system component parts (where technical and commercial synergies exist) in liaison with the Lead Electrical Engineer and Senior Project Manager for the project. • Be responsible for the planning, time schedule and budget control of the Onshore Substation, grid connection works and associated electrical systems and equipment, and civils and mechanical works. • Face to face interactions with the site team and main contractor at the construction site is expected for a minimum of two days per week.   CERTIFICATIONS • Degree or Chartership in Project Management and membership of recognised Project Management organisation such as APM • Sound knowledge of Electrical Engineering, preferably higher qualification, or closely related competency • Renewable energy/offshore wind farm experience • Demonstrable experience of working effectively in an international business OTHER REQUIREMENTS • Understanding of and ability to work to the CDM regulations. • Experience of working in package management of Offshore substations or closely related complex infrastructure. • Experience on large, complex capital projects through development and construction phase, especially HV and EHV transmission systems and associated works in the UK. • Knowledge of grid infrastructure and grid code • Renewable energy/offshore wind farm experience

Onshore Substation Package Manager - RWE

My client is a global materials technology and recycling group, committed to developing sustainable solutions for clean mobility and recycling. The Olen site is a key production facility within the Cobalt & Specialty Materials (CSM) Business Unit. The Maintenance Engineering Department at CSM Olen is responsible for ensuring the reliability and optimal performance of production equipment and installations. The team focuses on improving machine reliability, optimising preventive maintenance plans, and supporting new projects with robust engineering practices. Primary Tasks and Responsibilities Investigate machine failures (Root Cause Analysis) and develop proposals to reduce downtime. Analyse technical issues and propose effective solutions. Create and optimise preventive maintenance plans. Prepare and execute Reliability-Centred Maintenance (RCM) exercises for new projects. Define spare parts requirements for critical equipment. Draft documentation for testing safety-critical components. Potentially take on additional day-to-day tasks after onboarding. Technical Profile Requirements Master’s degree in a technical field or equivalent experience. 5–7 years of experience in maintenance/reliability engineering, preferably in the process industry. Strong technical knowledge in electromechanics (hydraulics, pneumatics, electricity). Familiarity with maintenance techniques and basic knowledge of materials. Proficient in SAP-PM and maintenance workflows (e.g., work order management). For more info, do not hesitate to get in touch!

Reliability Engineer

Project Manager  Start date: ASAP Duration: Long term contract. Location: Hoboken Belgium Rotation: Monday-Friday. Description Explanation about Umicore Umicore is a global player in materials technology. It is a stable international group and at the same time a thoroughly Belgian company with four sites in Belgium. We develop technologies and produce materials for high-performance solar cells used in satellites, rechargeable batteries, LED applications, catalysts... Through recycling, we recover valuable metals from laptops, mobile phones, and other devices. Department description and responsibilities The Precious Metals Refining (PMR) department produces solutions based on base and precious metals. At our Hoboken site, we are investing heavily to meet changing processes and legislation. Our Technology department, with its enthusiastic employees, is the driving force behind these projects. We support various production departments with technical advice and follow the full cycle of these projects—from feasibility, through design and implementation, to commissioning. Project description As Project Manager, you will manage the projects assigned to you from A to Z.This will be a combination of larger and smaller projects, including both new initiatives and expansions. Primary Tasks and responsibilities Manage the scope, budget, timeline, and quality of projects from A to Z Coordinate engineering (basic and detailed), execution, and commissioning Responsible for project layout, determining process parameters in consultation with production and R&D colleagues, providing input for P&IDs and design Managing and monitoring the process-related part within their projects Focus on safety, ergonomics, automation, maintenance, and energy efficiency Collaborate with the purchasing department for components and services Coordinate multidisciplinary teams (internal and external) Communicate with internal stakeholders Coordinate site and execution Organise the commissioning phase Technical profile requirements Master's degree in engineering (mechanical, electrical, chemical, or metallurgical) or equivalent through experience Minimum degree: industrial engineer Minimum 10 years of experience as an end-to-end Project Manager in multi-disciplinary projects or within one of the aforementioned disciplines Relevant experience in the sector, preferably in chemistry/metallurgy/machine construction Minimum 5 years of experience as a (Project) Engineer within one of the aforementioned disciplines Ability to read and draw P&ID's Strong technical insight = absolute minimum requirement Non-Technical profile requirements Positive attitude and team-oriented Sense of responsibility and initiative Hands-on mentality and safety awareness Strong communication skills Proficiency in Dutch is required Methodology/Certification requirements VCA VOL Certification as project manager is a strong added value Language proficiencies Dutch: fluent Other languages are a plus Location Umicore Hoboken 100% onsite presence required Contract Start ASAP, notice period is acceptable Long-term collaboration planned Skills Background as (project) engineer - 5 Years Can read & understand P&ID's - Yes Ervaring E2E project manager - 10 Year

Project Manager

Cable Lay Superintendent Duration: 23/02/2026 – 28/06/2026 Rotation: 4/4 Location: International Waters Description: Client information A world leader in the highly specialised fields of dredging, solutions for the offshore energy market, infra marine and environmental works. With more than 140 years of experience and 5,200 highly skilled professionals, we bring tailor-made solutions, innovation and new technologies to our customers’ projects, ensuring that they are performed safely, efficiently and cost-effectively. Department Description and responsibilities Offshore is a global solutions provider in the offshore oil, gas and renewables industry. We have an unrivalled track record in the transport and installation of foundations, turbines, inter-array cables, export cables and substations for offshore wind farms. In the oil & gas industry we are experts in landfalls and civil works, rock placement, heavy lift, umbilical’s and installation and decommissioning services. By operating a high-tech and versatile fleet of vessels we offer flexible solutions for the most complex offshore energy projects. Primary Tasks and responsibilities -Make sure all cable related operations are done in the most safe and optimal way. -Lead a team of 10 to 15 members (foremen and operators). -Hold the shift handover meetings with the team onboard. -Liaise with colleagues on the bridge and surveyors for an optimal cable operation. -Run and supervise all operations on the back-deck. This includes the operability of the Cable, installation System (CIS), ROVs, cranes and other equipment onboard. -Make sure works are performed with the highest level of safety. -Take care of the integrity of the cable during loading, transporting and installation phases. -Do a daily log of activities performed. -Assume responsibility for overseeing the cable installation process, ensuring precise, secure cable placement, and upholding the highest quality and performance standards. -Utilize your technical acumen to identify and resolve complex technical challenges that may arise during cable installation, ensuring the seamless progress of projects. -OIM is single point of contact, but the Cable Lay Superintendents have daily contact with the client representatives during the operations and to answer questions about the progress and technical questions Technical profile requirements - 7 years of experience in submarine cable installation, demonstrated through several years of experience in senior technician or similar roles. -Safety Focus: A strong commitment to prioritizing safety and adhering to safety protocols and guidelines. -Leadership Excellence: Proven leadership abilities and exceptional communication skills to effectively manage and lead a diverse team. Non-Technical profile requirements -Strong communication skills -Good knowledge & experience with MS Office -Good command of English, both written and spoken -Fit for Offshore work. Methodology/Certification requirements -MSC/MSc Degree in Civil Engineering, Mechanic Engineering, Chemical Engineering OR equivalent through experience. Certifications required -Valid US Visa or B1 OCS Wind (!) Visa -Full GWO -Offshore medical -VCA/SCC Language proficiencies -Fluent speaking and writing English, proficiency in other languages is a major plus.

Cable Lay Superintendent

Sales Director – EV Charging Infrastructure - remote with travel Sector: Electric Vehicle Charging Infrastructure Strong opportunity to join a fast-growing EV charging infrastructure company playing a critical role in the transition to a low-carbon transport system. As demand for reliable, scalable charging solutions accelerates across public, commercial, and fleet sectors, our client is seeking an experienced Sales Director to lead otheir commercial strategy and drive sustainable revenue growth. This is a senior leadership role with significant influence over company direction, offering the opportunity to shape how EV charging infrastructure is deployed at scale. The Sales Director will be responsible for defining and executing the sales strategy, building high-performing teams, and securing long-term partnerships across key markets. Key responsibilities include: <ul><li>Developing and owning the company’s sales strategy across public, private, fleet, and commercial customers</li><li>Leading, mentoring, and scaling a high-performing sales and business development team</li><li>Driving pipeline growth, forecasting, and revenue delivery against ambitious targets</li><li>Building strategic partnerships with local authorities, property developers, fleet operators, utilities, and corporates</li><li>Leading complex, high-value negotiations and long-term framework agreements</li><li>Working closely with product, operations, and finance to ensure solutions are commercially viable and deliverable</li><li>Providing market insight to inform product roadmap, pricing, and go-to-market strategy</li></ul>About You You are a commercially astute leader with a proven track record of selling complex infrastructure, energy, or technology solutions. You will likely have: <ul><li>Senior sales leadership experience within EV charging, energy, infrastructure, mobility, or adjacent sectors</li><li>Demonstrated success in closing large, multi-stakeholder deals and long sales cycles</li><li>Experience building and leading sales teams in high-growth environments</li><li>Strong understanding of the EV ecosystem, grid considerations, and commercial models</li><li>Excellent negotiation, communication, and stakeholder management skills</li><li>A strategic mindset with hands-on execution capability</li></ul>Apply now or contact us for a confidential discussion.

Sales Director

Design Manager - Execution - Data Centre Business Unit - Paris An established business that supports major clients in France and internationally through the design, construction, and renovation of high-performance Data Centre facilities, are currently looking to strengthen their Pre-Construction Department with an experienced Design Manager. This is a key position at the crossroads of technical expertise, project coordination, and strategic development, and as the successful Design Manager you will contribute to projects from early concept phases through the full execution stage. You will act as the technical guarantor of design quality and consistency, ensuring that all studies align with operational, contractual, financial, and environmental expectations. Responsibilities will include: <ul><li>Leading and coordinating all execution-phase studies for a major Data Centre projects</li><li>Guarantee the proper development and integration of all-trades (TCE) studies for large-scale industrial buildings</li><li>Ensure the consideration of operational constraints (health & safety), environmental requirements, technical risks, and contractual commitments</li><li>Assemble the technical pricing and coordinate study inputs</li><li>Supervise internal and external engineering contributors</li><li>Lead design and costing studies</li><li>Propose value-engineering ideas and innovative alternatives</li></ul> Ideal skills and experience: <ul><li>Engineering or university degree with 10 years of experience in TCE building projects, technical packages, or execution studies/works</li><li>A technically driven professional with a passion for innovation and optimization</li><li>Strong communication skills and a collaborative mindset, fluent in French and English</li><li>Solid technical knowledge of building systems and technical lots (electrical, HVAC) as well as execution studies</li><li>Motivated to join a dynamic Business Unit where technical excellence and personal aspirations are valued for long-term growth</li></ul>

Design Manager - Execution (Data Centre)

Electrical Project Manager - Business Unit - Data Centre Projects - Paris An established international client of ours is currently looking for an experienced Electrical Project Manager to join their Data Centre division in Paris. This particular business Unit brings together over one hundred experts dedicated to the commercial development, design, structuring, and delivery of major turnkey Data Centre projects in close collaboration with construction agencies. The successful Electrical PM will be reporting directly to the Head of the Electrical Division, and will take responsibility for developing technical and financial studies for large-scale Data Centre construction projects. These electrical packages typically range from €20M to €250M. Key responsibilities: <ul><li>Conduct technical and financial analyses of Data Centre projects during tender phases</li><li>Propose technical optimizations and alternatives to improve project cost efficiency and scheduling</li><li>Lead the design development through APS / APD / PRO DCE stages, managing both internal and external engineering contributors.</li><li>Review supplier and contractor offers, identifying risks, key concerns, and financial impacts.</li><li>Collaborate with various internal teams (civil engineering, HVAC, Design Managers, commercial teams, planning) and external partners</li></ul> Ideal skills and experience: <ul><li>5 years of experience in a similar role on multi-trade projects</li><li>Confident in managing all aspects of technical and financial project development within the electrical domain</li><li>Bilingual communication skills (French & English), enabling you to manage documentation and interact with diverse stakeholders</li><li>The ability to develop clear, structured project documentation, using effective tools and methodologies</li><li>Strong versatility and adaptability, allowing you to navigate the highly technical and evolving environment of Data Centres</li></ul>

Electrical Project Manager

Battery Expert - Battery Systems for Charging Infrastructure - DACH Earthstream are partnered with an exciting EV charging business that is rapidly expanding across Europe and looking for dedicated and experienced BESS Engineers to join the team. As a BESS Expert, you will play a key role in scaling battery-backed charging infrastructure across Germany, Austria, and Switzerland. Batteries are at the heart of their expansion plans, enabling grid-independent deployment, optimized energy management, and new revenue opportunities in the energy market. You will work across design, installation, commissioning, operation, and maintenance, and collaborate closely with teams in Industry, Energy, and Network Operations. Key Responsibilities <ul><li>Develop and implement a regional energy strategy integrating BESS</li><li>Evaluate and optimize technical designs for performance, reliability, and cost efficiency</li><li>Act as the primary interface to grid operators, external partners, and internal stakeholders</li><li>Oversee battery system rollout and ensure operational excellence in the DACH region</li><li>Provide electrical engineering expertise to teams across Europe</li></ul> Skills and experience: <ul><li>Degree in Electrical Engineering or equivalent technical background</li><li>5 years hands-on experience with battery systems (installation, commissioning, operations, compliance)</li><li>Strong problem-solving mindset with a passion for innovation</li><li>Autonomous team player capable of coordinating cross-border initiatives</li><li>Comfortable working in fast-paced, R&D-driven environments</li><li>Fluent in German and English</li></ul> Please get in touch asap for further details!

Battery Integration Expert - EV Charging Infrastructure

Business Development Manager - Clean Energy Industry - Remote Travel - UK Earthstream is working closely with a well-established clean energy business who are looking for a motivated Business Development Manager to drive commercial opportunities across the UK, and ensure exceptional service delivery across new and exisiting accounts. This is a fantastic opportunity for someone with a background in the energy space who is passionate about the clean energy transition, and now looking to take their career to the next level. Skills and experience: <ul><li>3-5 years’ experience in Business Development and Sales, ideally with some in the energy space</li><li>Strong track record of building lasting client partnerships/relationships</li><li>Track record of achieving yearly targets</li><li>Excellent communication and organizational skills</li><li>Proficient in Microsoft Office and CRM tools</li><li>Willing and able to travel when need be</li></ul> Please get in touch asap to be considered!

BD Manager

Project Manager - Utility Scale Solar/PV - Hybrid EarthStream Global is working with an exciting international business who specialise in developing and constructing utility scale Solar/PV plants across Europe, and who are looking for an established Project Manager with an electrical background to join the UK team. The successful Project Manager will have the responsibility of managing the UK project portfolio through all phases of development under turnkey contract agreement, including pre-construction, construction, commissioning, and maintenance. You will be involved with reviewing electrical designs, negotiating with customers, providing cost estimation and project schedules, tendering and awarding subcontractor services, as well as managing the project team and monitoring the construction work. Essential skills: <ul><li>5 years’ experience in project management with a focus on end to end renewable energy or electrical installations</li><li>Good experience managing projects under turnkey contract agreements</li><li>Good knowledge of calculation, execution planning, and contracting</li><li>Systematic way of working with the ability to drive results and customer orientated</li><li>Vey collaborative, open to ideas and feedback, and ability to work in a team</li><li>Strong electrical knowledge</li><li>Strong communication skills and fluent in English</li><li>Willing and able to travel to construction sites</li></ul>Ideal skills: <ul><li>Good experience in the utility scale Solar/PV industry</li></ul>

Electrical Site Manager - Utility-scale Solar/PV - UK-wide An exciting opportunity has come up for an experienced Electrical Site Manager to join a fast-growing international business that specialises in developing and building utility scale Solar/PV farms across the UK. As the Electrical Site Manager you will be responsible for overseeing the construction of large Solar/PV projects, supervising and coordinating the works of the subcontractors and ensuring proper execution of works on site. You will ensure Health and Safety regulations are adhered to, and work closely with PM's and Engineers to ensure the smooth day-to-day running on the site. Essential skills: <ul><li>Electrical background as an engineer or electrician or similar</li><li>Strong experienced managing electrical project sites</li><li>Strong leadership and decision making ability</li><li>As much of the following as possible - CITB HS&E, ECS, SSSTS, ECS, First Aid</li><li>Microsoft Office Software</li><li>Strong communication and fluent English</li><li>Willing and able to travel UK wide</li><li>PV or Grid related projects</li></ul>Please get in touch asap to be considered!

Electrical Site Manager - Utility-scale Solar/PV - UK-wide

OBJECTIVE To assist the Wind Farm Commissioning Team in performing all commissioning-related tasks, ensuring safe and compliant execution of electrical operations up to 225kV. CORE RESPONSIBILITIES Electrical Safety & Operations <ul><li>Act as Senior Authorized Person (SAP) for systems from 33kV to 225kV</li><li>Safely execute switching operations and apply/remove Lock-Out/Tag-Out (LOTO) processes</li><li>Energise and de-energise electrical equipment up to 225kV per approved switching schedules</li><li>Follow Inter-Array Cables test program and ensure 33kV equipment is prepared for safe testing</li><li>Perform and document pre-energization and post-energization inspections</li><li>Contribute to and enforce Electrical Safety Rules</li></ul>Work Control & Coordination <ul><li>Implement and maintain Permit to Work (PTW) system</li><li>Prepare and lead toolbox talks and site inductions</li><li>Coordinate de-energizations with Control Engineers</li><li>Monitor work practices for HSE compliance and report improvement areas</li><li>Manage interfaces between multiple stakeholders and multi-skilled subcontractor teams</li></ul>Documentation & Reporting <ul><li>Review and prepare Risk Assessment Method Statements (RAMS)</li><li>Monitor and document all switching activities</li><li>Report commissioning progress in daily progress reports</li><li>Report HSE issues in Sphera system</li><li>Ensure end-of-shift handover reports are completed</li></ul>Commissioning Support <ul><li>Participate in commissioning tests to ensure project compliance</li><li>Detect and report outstanding works and quality issues</li><li>Escalate technical arbitration/solutions when required</li><li>Perform basic maintenance of electrical equipment up to 225kV</li><li>Conduct safety drills to identify improvement areas</li></ul>

Senior Authorised Person - 225KV

Lead Electrical and Instrumentation (E&amp;I) Engineer Start date:&nbsp;ASAP Duration:&nbsp;Long term contract. Location:&nbsp;Olen Belgium Rotation:&nbsp;Monday-Friday. Project Description As a Lead E&amp;I Engineer in Olen, you are responsible for managing electrical and instrumentation projects from concept to delivery. You act as the technical discipline lead for E&amp;I within large-scale multidisciplinary industrial investment projects (up to &euro;30 million) and work closely with the Project Manager, who holds overall responsibility for the project. This is not a purely design-oriented role &mdash; we are looking for a Lead Engineer who can provide technical leadership and coordination within multidisciplinary projects. Tasks &amp; Responsibilities &bull; Independently lead the electrical and instrumentation (E&amp;I) discipline from A to Z, from feasibility studies through commissioning and handover. &bull; Make technical decisions regarding materials and applications, taking environmental factors into account. &bull; Collaborate closely with internal project teams (mechanical, site, design), the Project Manager, and external partners. &bull; Interpret and assess electrical diagrams and cable calculations (including in Caneco) and provide solutions where necessary. &bull; Ensure compliance with ATEX regulations throughout all relevant project phases. &bull; Support projects related to process installations (e.g., battery-related projects such as anode). &bull; Work from transformer level, focusing on low voltage with basic knowledge of high voltage. &bull; Prepare technical specifications and tender documents, define and monitor project budgets, and track planning and milestones. &bull; Correctly interpret SIL, PL, and Exi calculations to ensure functional safety and compliance. &bull; Correctly interpret Exi calculations in the context of ATEX regulations. &bull; Be willing to travel occasionally within Europe and Asia for project follow-up. Technical Profile Requirements &bull; Master&rsquo;s or bachelor&rsquo;s degree in electrical engineering. &bull; Minimum 3 years of experience in a leading E&amp;I role within process industry projects. &bull; Minimum 7 years of experience as an E&amp;I Engineer in the process industry. &bull; Excellent knowledge of industrial instrumentation (pressure, flow, level measurements, etc.). &bull; Experience with project-based work in the process industry. &bull; Strong knowledge and practical experience with ATEX guidelines and applications. &bull; Ability to interpret electrical diagrams (e.g., in EPLAN) &mdash; drawing skills are not required. &bull; Experience with Caneco for cable calculations and interpretation. &bull; Proven experience interpreting SIL safety calculations. &bull; Basic knowledge of hardware and automation (no programming knowledge required). Non-Technical Profile Requirements &bull; You work independently. &bull; You work proactively. &bull; You are solution-oriented. &bull; You can act diplomatically. &bull; You can communicate smoothly with different levels. Language Skills &bull; Fluent in Dutch. &bull; Fluent in English. &bull; Other languages are a plus. Location &bull; Olen. &bull; Onsite presence required. &bull; Standard client policy applies after the induction period. &bull; Current policy: minimum 3 days per week onsite presence. Contract &bull; Long-term collaboration foreseen. Selection Procedure &bull; Two interview rounds: first interview via Teams, second interview on location. Skills &ndash; please make sure candidates confirm each below and fill in the questionnaire Fluent in Dutch - Yes Min. 3 years&rsquo; experience in a leading E&amp;I role within projects in the process industry. - 3 Years Min. 7 years&rsquo; experience as an E&amp;I Engineer in the process industry. - 7 Years Very good knowledge of industrial instrumentation (pressure measurement, flow measurement, level measurement, etc.). - 7 Years

Lead Electrical and Instrumentation Engineer

My client is a large materials manufacturer with sites all across Europe - their main sites being in Antwerp. As a Lead E&I Engineer, you are responsible for managing electrical and instrumentation projects from concept to delivery. You act as the technical discipline lead for E&I within large-scale multidisciplinary industrial investment projects (up to €30 million) and work closely with the Project Manager, who holds overall responsibility for the project. This is not a purely design-oriented role — we are looking for a Lead Engineer who can provide technical leadership and coordination within multidisciplinary projects. Tasks & Responsibilities <ul><li>Independently lead the electrical and instrumentation (E&I) discipline from A to Z, from feasibility studies through commissioning and handover.</li><li>Make technical decisions regarding materials and applications, taking environmental factors into account.</li><li>Collaborate closely with internal project teams (mechanical, site, design), the Project Manager, and external partners.</li><li>Interpret and assess electrical diagrams and cable calculations (including in Caneco) and provide solutions where necessary.</li><li>Ensure compliance with ATEX regulations throughout all relevant project phases.</li></ul> Technical Profile Requirements <ul><li>Master’s or bachelor’s degree in electrical engineering.</li><li>Minimum 3 years of experience in a leading E&I role within process industry projects.</li><li>Minimum 7 years of experience as an E&I Engineer in the process industry.</li><li>Excellent knowledge of industrial instrumentation (pressure, flow, level measurements, etc.).</li><li>Experience with project-based work in the process industry.</li><li>Strong knowledge and practical experience with ATEX guidelines and applications.</li><li>Ability to interpret electrical diagrams (e.g., in EPLAN) — drawing skills are not required.</li><li>Experience with Caneco for cable calculations and interpretation.</li></ul> For more information, do not hesitate to get in touch!

Power System Engineer 02/2026 – 07/2026 initially London The consultant will support projects at various phases by conducting studies. Scope includes: <ul><li>Create and validate EMT and RMS models for relevant assets (e.g., WTG, PPC, STATCOM, as applicable).</li><li>Plan and execute design and Grid Code compliance studies, small disturbances and fault scenarios.</li><li>Draft clear, audit-ready technical documentation for internal review and external compliance; contribute to grid-connection workstreams.</li><li>Interface with OEMs on model provisioning, validation, and parameterization.</li><li>Summarize findings, recommend mitigations, and ensure quality in line with client standards across multiple projects.</li></ul> Requirements <ul><li>Degree in Electrical/Power Systems Engineering (BEng/MSc/PhD) or equivalent.</li><li>At least 5 years’ hands-on experience with PSCAD for EMT studies, including applicable add-ons and analysis modules, plus required experience with DIgSILENT PowerFactory covering steady-state and RMS analyses.</li><li>Experience working with vendor models and parameterization for compliance.</li><li>Scripting/automation skills for workflows and post-processing.</li><li>Experience coordinating with OEMs for model delivery, validation, and updates. strong data confidentiality practices</li><li>Strong communication skills; able to produce clear reports and stakeholder materials.</li><li>Ability to work independently while following clients established methodologies, documentation standards, and QA processes.</li></ul> Nice to Have (Optional) <ul><li>Experience with National Grid ESO EMT guidelines and evidence requirements.</li><li>Experience with grid‑forming controls or advanced STATCOM functionalities.</li></ul> Resources Provided <ul><li>Client will supply a laptop and all necessary software licenses and access.</li></ul> Engagement Terms <ul><li>No additional certifications required.</li><li>No travel required; the role is fully remote.</li><li>Contract basis, billed per hour or per day.</li><li>Flexible allocation subject to project demands and priorities.</li></ul>

Power Systems Engineer

My client is a large windfarm developer with windfarms across the globe. They are looking for a Power System Engineer on a fully remote contract to start in February, details below: The consultant will support projects at various phases by conducting studies. Scope includes:   <ul><li>Create and validate EMT and RMS models for relevant assets (e.g., WTG, PPC, STATCOM, as applicable).</li><li>Plan and execute design and Grid Code compliance studies, small disturbances and fault scenarios.</li><li>Draft clear, audit-ready technical documentation for internal review and external compliance; contribute to grid-connection workstreams.</li><li>Interface with OEMs on model provisioning, validation, and parameterization.</li><li>Summarize findings, recommend mitigations, and ensure quality in line with Ørsted standards across multiple projects.</li></ul>  Requirements <ul><li>Degree in Electrical/Power Systems Engineering (BEng/MSc/PhD) or equivalent.</li><li>At least 5 years’ hands-on experience with PSCAD for EMT studies, including applicable add-ons and analysis modules, plus required experience with DIgSILENT PowerFactory covering steady-state and RMS analyses.</li><li>Experience working with vendor models and parameterization for compliance.</li><li>Scripting/automation skills for workflows and post-processing.</li><li>Experience coordinating with OEMs for model delivery, validation, and updates. strong data confidentiality practices</li><li>Strong communication skills; able to produce clear reports and stakeholder materials.</li><li>Ability to work independently while following Ørsted’s established methodologies, documentation standards, and QA processes.</li></ul>  Nice to Have (Optional) <ul><li>Experience with National Grid ESO EMT guidelines and evidence requirements.</li><li>Experience with grid‑forming controls or advanced STATCOM functionalities.</li></ul> For more information, do not hesitate to get in touch!

Power System Engineer

Senior HR Controlling Essen, Germany (hybrid working) 01/2026 – 06/2026 Establish a trusted HR controlling function for Offshore Wind that measures, monitors, and reports workforce efficiency and effectiveness to senior leadership, aligned with the client growth plan in offshore wind. Primary Objectives: <ul><li>Design and deliver executive grade management reports on HR efficiency for Offshore Wind</li><li>Implement a repeatable reporting cadence with robust definitions, controls, and auditability across the clients HR stack (SAP / SuccessFactors).</li><li>Provide insights and actions that support Offshore capacity build out, project delivery, and operational excellence.</li></ul> Key Responsibilities: <ol><li>Reporting Framework & Governance (Offshore)</li><li>Define a KPI architecture reflecting the clients segment view (Offshore), focusing on delivering efficiency program outcome.</li><li>Establish data governance (validation, reconciliation to payroll/finance, versioning), and role based access.</li></ol> <ol><li>Data Management & Measurement (clients HR Stack)</li><li>Maintain a single source of truth for headcount/FTE focusing on efficiency program</li></ol> <ol><li>Report Design & Delivery (Executive Grade for Offshore)</li><li>Monthly Executive Dashboard Quarterly Management Report with:</li><li>Executive Summary (signals, risks, actions).</li><li>Variance Analysis (plan vs. actual; forecast vs. actual; staffing vs. project schedules).</li><li>Root Cause & Action Tracker (initiative list, owners, deadlines, impact).</li><li>Delivery in Power BI</li><li>Ad hoc analyses for Board Senior Management</li></ol> Deliverables (Offshore) <ol><li>Executive Reporting Pack (Monthly Quarterly) – Power BI/Tableau dashboards plus PPT/PDF with narrative and action list.</li><li>Quarterly Efficiency Review – deep dive on staffing & onboarding, learning compliance, benefit realization supporting capacity additions.</li><li>Forecasting & Scenario Models – headcount & cost projections linked to project schedules/milestones.</li><li>Action/Initiative Tracker – owners, milestones, status, expected € impact.</li></ol> Tools & Systems (clients Offshore Stack) <ul><li>Source Systems: SAP (Recruiting, Learning, Performance & Goals, Succession, Compensation); Payroll; Time & Attendance; Finance/CO.</li><li>Analytics & Reporting: Power BI; Excel for reconciliation; PPT for executive pack.</li></ul> Roles & Responsibilities <ul><li>HR Controller (Offshore): Own framework, validations, narrative, and exec delivery.</li><li>BI Analyst/Data Engineer: Build/maintain reporting and models</li></ul> Qualifications: <ul><li>Bachelor’s/Master’s in Business, Finance, HR Analytics, or related field.</li><li>5 years in HR Controlling/People Analytics within complex, project‑driven organizations (energy/engineering a plus).</li><li>Proficiency with Power BI/Tableau, advanced Excel; experience with SAP SuccessFactors (Recruiting, Learning, Performance & Goals, Succession, Compensation).</li><li>Strong data quality and governance mindset; comfort with reconciliations and audit trails.</li><li>Excellent communication skills—able to write executive summaries and present to senior leaders.</li><li>Working knowledge of German HR compliance (DSGVO, co‑determination) and familiarity with contingent workforce processes is a plus.</li><li>Fluent in English and German.</li></ul> Competencies: <ul><li>Analytical rigor & problem‑solving</li><li>Stakeholder management & influence</li><li>Business acumen (project delivery, cost/benefit)</li><li>Data governance & attention to detail</li><li>Clear executive communication (visuals narrative)</li></ul> Success Measures: <ul><li>On‑time, accurate executive reporting</li><li>Actionable insights adopted by Offshore leadership; benefits realized vs. plan</li><li>Reduced data issues; strong audit trail and compliance</li></ul>

Senior HR Controlling

My client is a large energy provider working all across Europe. They are currently looking for a Senior HR Controller, details below: Location: Essen (hybrid work) Establish a trusted HR controlling function for my client that measures, monitors, and reports workforce efficiency and effectiveness to senior leadership, aligned with company growth plan in offshore wind. Primary Objectives: <ul><li>Design and deliver executive grade management reports on HR efficiency for Offshore Wind</li><li>Implement a repeatable reporting cadence with robust definitions, controls, and auditability across client's HR stack (SAP / SuccessFactors).</li><li>Provide insights and actions that support Offshore capacity build out, project delivery, and operational excellence.</li></ul> Deliverables (Offshore) <ul><li>Executive Reporting Pack (Monthly Quarterly) – Power BI/Tableau dashboards plus PPT/PDF with narrative and action list.</li><li>Quarterly Efficiency Review – deep dive on staffing & onboarding, learning compliance, benefit realization supporting capacity additions.</li><li>Forecasting & Scenario Models – headcount & cost projections linked to project schedules/milestones.</li><li>Action/Initiative Tracker – owners, milestones, status, expected € impact.</li></ul> Qualifications: <ul><li>Bachelor’s/Master’s in Business, Finance, HR Analytics, or related field.</li><li>5 years in HR Controlling/People Analytics within complex, project‑driven organizations (energy/engineering a plus).</li><li>Proficiency with Power BI/Tableau, advanced Excel; experience with SAP SuccessFactors (Recruiting, Learning, Performance & Goals, Succession, Compensation).</li><li>Strong data quality and governance mindset; comfort with reconciliations and audit trails.</li><li>Excellent communication skills—able to write executive summaries and present to senior leaders.</li><li>Working knowledge of German HR compliance (DSGVO, co‑determination) and familiarity with contingent workforce processes is a plus.</li><li>Fluent in English and German.</li></ul> For full job description, do not hesitate to get in touch!

Transmission Line Engineer EarthStream Global are looking for a Transmission Line Engineer that focuses on both civil and electrical engineering aspects of transmission line design, working on systems ranging from 34.5kV to 500kV. This role requires a solid understanding of transmission systems and line design principles. Duties & Responsibilities: <ul><li>Design cost-effective solutions for high voltage transmission lines.</li><li>Represent the Engineering department and participate in cross-departmental meetings.</li><li>Monitor project progress to ensure timely delivery, within budget, and exceeding customer expectations.</li><li>Perform transmission line engineering tasks independently.</li><li>Balance innovation with standardized work processes.</li><li>Senior level engineers (Project Engineer/Senior Project Engineer) will ensure projects meet quality and schedule goals.</li><li>Occasional travel for short assignments as needed.</li></ul>Minimum Qualifications / Experience: <ul><li>Bachelor’s Degree in Civil or Electrical Engineering from an accredited university.</li><li>Minimum of 3 years of hands-on experience in transmission line design.</li><li>Experience in preparing cost-effective designs in an EPC environment.</li><li>Familiarity with substation structures, foundations, and site development.</li><li>Familiarity with design documents and drawings essential for project completion.</li></ul>Other working locations are available.

Transmission Line Engineer - TX

Transmission Line Engineer EarthStream Global are looking for a Transmission Line Engineer that focuses on both civil and electrical engineering aspects of transmission line design, working on systems ranging from 34.5kV to 500kV. This role requires a solid understanding of transmission systems and line design principles. Duties & Responsibilities: <ul><li>Design cost-effective solutions for high voltage transmission lines.</li><li>Represent the Engineering department and participate in cross-departmental meetings.</li><li>Monitor project progress to ensure timely delivery, within budget, and exceeding customer expectations.</li><li>Perform transmission line engineering tasks independently.</li><li>Balance innovation with standardized work processes.</li><li>Senior level engineers (Project Engineer/Senior Project Engineer) will ensure projects meet quality and schedule goals.</li><li>Occasional travel for short assignments as needed.</li></ul>Minimum Qualifications / Experience: <ul><li>Bachelor’s Degree in Civil or Electrical Engineering from an accredited university.</li><li>Minimum of 3 years of hands-on experience in transmission line design.</li><li>Experience in preparing cost-effective designs in an EPC environment.</li><li>Familiarity with substation structures, foundations, and site development.</li><li>Familiarity with design documents and drawings essential for project completion.</li></ul>Other working locations are avaiable.

Transmission Line Engineer - GA

Mechanical Field Service Engineer – Aero Turbines Location: Various Field Locations / Travel Required Job Type: Full-Time Industry: Power Generation / Oil & Gas / Energy Job Summary: EarthStream Global are looking for highly skilled and motivated Mechanical Field Service Engineers with proven experience in the installation, maintenance, and overhaul of aeroderivative gas turbines. The ideal candidate will play a critical role in supporting field operations globally, ensuring turbine systems are installed and maintained to the highest standards of performance, safety, and reliability. Key Responsibilities: <ul><li>Lead or support the installation, inspection and overhaul of aeroderivative gas turbines at customer sites.</li><li>Troubleshoot and resolve mechanical issues related to turbines, compressors, gearboxes, and auxiliaries.</li><li>Perform mechanical disassembly, reassembly, alignment, and dynamic checks on major rotating equipment.</li><li>Collaborate with OEM representatives and site personnel to ensure proper execution of work scopes and documentation.</li><li>Conduct root cause analysis and prepare detailed service reports, findings, and recommendations.</li><li>Adhere strictly to health, safety, and environmental standards and customer-specific regulations.</li><li>Provide technical guidance and mentorship to junior field engineers and technicians.</li><li>Travel to domestic and international customer sites on short notice as needed.</li></ul>Qualifications: <ul><li>Bachelor’s degree in Mechanical Engineering, or equivalent technical qualification.</li><li>Minimum of 5 years of field experience with aeroderivative turbines.</li><li>Proficiency in reading and interpreting mechanical drawings, P&IDs, and OEM manuals.</li><li>Familiarity with control systems.</li><li>Ability to work in demanding environments, including offshore and remote locations.</li><li>Willingness to travel extensively.</li></ul>

Mechanical FSE - Aero 

Mechanical Field Service Engineer – Aero Turbines Location: Various Field Locations / Travel Required Job Type: Full-Time Industry: Power Generation / Oil & Gas / Energy Job Summary: EarthStream Global are looking for highly skilled and motivated Mechanical Field Service Engineers with proven experience in the installation, maintenance, and overhaul of aeroderivative gas turbines. The ideal candidate will play a critical role in supporting field operations globally, ensuring turbine systems are installed and maintained to the highest standards of performance, safety, and reliability. Key Responsibilities: <ul><li>Lead or support the installation, inspection and overhaul of aeroderivative gas turbines at customer sites.</li><li>Troubleshoot and resolve mechanical issues related to turbines, compressors, gearboxes, and auxiliaries.</li><li>Perform mechanical disassembly, reassembly, alignment, and dynamic checks on major rotating equipment.</li><li>Collaborate with OEM representatives and site personnel to ensure proper execution of work scopes and documentation.</li><li>Conduct root cause analysis and prepare detailed service reports, findings, and recommendations.</li><li>Adhere strictly to health, safety, and environmental (HSE) standards and customer-specific regulations.</li><li>Provide technical guidance and mentorship to junior field engineers and technicians.</li><li>Travel to domestic and international customer sites on short notice as needed.</li></ul>Qualifications: <ul><li>Bachelor’s degree in Mechanical Engineering, or equivalent technical qualification.</li><li>Minimum of 5 years of field experience with aeroderivative turbines.</li><li>Proficiency in reading and interpreting mechanical drawings, P&IDs, and OEM manuals.</li><li>Familiarity with control systems.</li><li>Ability to work in demanding environments, including offshore and remote locations.</li><li>Willingness to travel extensively.</li></ul>

Mechanical FSE - Aero

Senior Transmission Line Engineer EarthStream Global is seeking a Senior Transmission Line Engineer with specialized expertise in overhead transmission line systems. This leadership role combines deep technical knowledge in both civil and electrical engineering disciplines with the ability to drive project success across all phases—concept development, design, and execution. Ideal candidates will bring a proven track record in delivering high-voltage overhead transmission solutions in complex and fast-paced environments. Key Responsibilities: <ul><li>Lead the design and engineering of overhead high-voltage transmission lines, ensuring safe, cost-effective, and reliable infrastructure that meets project and industry standards.</li><li>Act as a senior technical authority, representing the Engineering department in internal reviews, client meetings, and multi-disciplinary planning sessions.</li><li>Oversee and manage project lifecycles—from feasibility through detailed design and construction support—ensuring delivery on time, within budget, and to high quality standards.</li><li>Perform advanced engineering analyses related to route selection, structure loading, conductor configuration, sag and tension calculations, and right-of-way considerations.</li><li>Mentor junior engineers and review technical deliverables to ensure accuracy and consistency across projects.</li><li>Integrate innovative design practices while maintaining compliance with regulatory requirements and established engineering standards.</li><li>Provide strategic input for EPC (Engineering, Procurement & Construction) project proposals and execution plans.</li><li>Travel occasionally to project sites, client locations, or manufacturing facilities as needed.</li></ul>Required Qualifications: <ul><li>Bachelor’s degree in Civil or Electrical Engineering from an accredited university. Master’s degree or Professional Engineer (PE) license is highly desirable.</li><li>Minimum of 7 years of focused experience in overhead transmission line engineering, including experience with structure and foundation design, conductor selection, and line routing.</li><li>Demonstrated ability to deliver cost-effective, constructible solutions in an EPC or utility environment.</li><li>Strong knowledge of industry codes and standards (e.g., NESC, IEEE, ASCE, ACI).</li><li>Experience preparing and reviewing engineering documentation, technical drawings, and construction packages for overhead transmission systems.</li><li>Excellent communication and leadership skills, with a collaborative approach to problem-solving and decision-making.</li></ul>

Senior Transmission Line Engineer - GA

Transmission Line Engineer EarthStream Global are looking for a Transmission Line Engineer that focuses on both civil and electrical engineering aspects of transmission line design, working on systems ranging from 34.5kV to 500kV. This role requires a solid understanding of transmission systems and line design principles.   Duties & Responsibilities: <ul><li>Design cost-effective solutions for high voltage transmission lines.</li><li>Represent the Engineering department and participate in cross-departmental meetings.</li><li>Monitor project progress to ensure timely delivery, within budget, and exceeding customer expectations.</li><li>Perform transmission line engineering tasks independently.</li><li>Balance innovation with standardized work processes.</li><li>Senior level engineers (Project Engineer/Senior Project Engineer) will ensure projects meet quality and schedule goals.</li><li>Occasional travel for short assignments as needed.</li></ul>  Minimum Qualifications / Experience: <ul><li>Bachelor’s Degree in Civil or Electrical Engineering from an accredited university.</li><li>Minimum of 3 years of hands-on experience in transmission line design.</li><li>Experience in preparing cost-effective designs in an EPC environment.</li><li>Familiarity with substation structures, foundations, and site development.</li><li>Familiarity with design documents and drawings essential for project completion.</li></ul>

Transmission Line Engineer

Senior Transmission Line Engineer 

Controls Technical Field Advisor (TFA) – Power Generation Location: Nationwide (USA) – Travel Required Industry: Power Generation / Energy Services Position Overview: We are currently seeking a skilled Controls Technical Field Advisor (TFA) to support the installation, commissioning, and overhaul of power generation equipment across multiple sites in the United States. The ideal candidate will bring hands-on experience with GE, along with a strong understanding of turbine operation and field service best practices. This is a travel-intensive role, ideal for someone who thrives in fast-paced environments and is passionate about delivering high-quality technical support on critical energy infrastructure projects. Key Responsibilities: <ul><li>Provide field support for the installation, commissioning, and major overhauls of turbine control systems (gas and steam turbines).</li><li>Lead and support control system configuration, calibration, loop checks, and troubleshooting.</li><li>Perform functional testing of control hardware and software (GE Mark VI, Vie)</li><li>Collaborate with site teams, OEM representatives, and customer personnel to ensure timely and efficient execution.</li><li>Deliver accurate field reports, commissioning logs, and control system documentation.</li><li>Maintain strict adherence to site safety protocols and industry standards.</li></ul>Required Qualifications: <ul><li>5 years of experience in power generation field services as a Controls TFA or similar role.</li><li>Proven hands-on experience with GE control systems (e.g., Mark VI, VIe).</li><li>Strong knowledge of turbine operation, instrumentation, and control system architecture.</li><li>Ability to interpret electrical schematics, P&IDs, and control logic diagrams.</li><li>Strong diagnostic and troubleshooting skills.</li><li>Willingness to travel up to 100% nationwide.</li><li>Excellent communication and customer interface skills.</li></ul>

Controls TFA

Job Title: Field Service Engineer – Heavy-Duty Gas Turbines Location: Multiple Sites / Travel-Based EarthStream Global are seeking a skilled and experienced Field Service Engineer to support the installation and commissioning of heavy-duty gas turbines at various project sites. The ideal candidate will have a strong technical background in turbomachinery and demonstrated experience working with OEMs such as GE, Siemens, Mitsubishi, or similar. This role involves hands-on technical support, troubleshooting, quality assurance, and collaboration with cross-functional teams to ensure successful project execution. Key Responsibilities:<ul><li>Lead and support the installation, assembly, alignment, and commissioning of heavy-duty gas turbines and associated systems (auxiliaries, controls, etc.).</li><li>Conduct pre-commissioning checks, system tests, and operational readiness assessments.</li><li>Provide on-site troubleshooting and diagnostics to resolve mechanical, electrical, or controls issues during installation and start-up phases.</li><li>Ensure adherence to health, safety, and environmental (HSE) policies and site protocols.</li><li>Prepare and maintain detailed project documentation, including daily progress reports, punch lists, and technical records.</li><li>Support end-user training and handover documentation as required.</li><li>Travel extensively to domestic and international project sites.</li></ul>Requirements:<ul><li>Degree or diploma in Mechanical / Electrical / Mechatronics Engineering or equivalent technical field.</li><li>5 years of experience working with gas turbines, with a focus on installation and commissioning.</li><li>Direct experience collaborating with major OEMs (e.g., GE, Siemens, MHPS).</li><li>Strong knowledge of turbine mechanics, instrumentation, and control systems.</li><li>Ability to read and interpret technical drawings, P&IDs, and OEM manuals.</li><li>Proven track record of working in field environments under pressure and meeting project deadlines.</li><li>Excellent communication, leadership, and interpersonal skills.</li><li>Willingness to travel extensively and work in challenging environments</li></ul>

Field Service Engineer - HDGT

Mechanical Field Service Engineer – Aero Turbines Location: Various Field Locations / Travel Required Job Type: Full-Time Industry: Power Generation / Oil & Gas / Energy Job Summary: EarthStream Global are looking for highly skilled and motivated Mechanical Field Service Engineers with proven experience in the installation, maintenance, and overhaul of aeroderivative gas turbines. The ideal candidate will play a critical role in supporting field operations globally, ensuring turbine systems are installed and maintained to the highest standards of performance, safety, and reliability. Key Responsibilities: <ul><li>Lead or support the installation, inspection and overhaul of aeroderivative gas turbines at customer sites.</li><li>Troubleshoot and resolve mechanical issues related to turbines, compressors, gearboxes, and auxiliaries.</li><li>Perform mechanical disassembly, reassembly, alignment, and dynamic checks on major rotating equipment.</li><li>Collaborate with OEM representatives and site personnel to ensure proper execution of work scopes and documentation.</li><li>Conduct root cause analysis and prepare detailed service reports, findings, and recommendations.</li><li>Adhere strictly to health, safety, and environmental standards and customer-specific regulations.</li><li>Provide technical guidance and mentorship to junior field engineers and technicians.</li><li>Travel to domestic and international customer sites on short notice as needed.</li></ul>Qualifications: <ul><li>Bachelor’s degree in Mechanical Engineering, or equivalent technical qualification.</li><li>Minimum of 5 years of field experience with aeroderivative turbines.</li><li>Proficiency in reading and interpreting mechanical drawings, P&IDs, and OEM manuals.</li><li>Familiarity with control systems.</li><li>Ability to work in demanding environments, including offshore and remote locations.</li><li>Willingness to travel extensively.</li></ul>

Job Title: Field Service Engineer – Compressor Installation & Commissioning Location: Multiple Sites / Travel-Based EarthStream Global are seeking an experienced and hands-on Field Service Engineer to support the installation, commissioning, and start-up of industrial compressors (centrifugal, axial, or reciprocating) at customer and project sites. The successful candidate must have prior experience working with OEMs such as Siemens, MAN, Dresser-Rand, or equivalent. Key Responsibilities:<ul><li>Oversee and execute the installation, alignment, and mechanical setup of compressors and auxiliary equipment.</li><li>Perform and support commissioning activities, including system checks, functional testing, and performance validation.</li><li>Collaborate directly with OEM engineering teams and follow all OEM-specific procedures and technical specifications.</li><li>Conduct troubleshooting and diagnostics on mechanical and control systems during installation and startup.</li><li>Ensure strict compliance with site safety standards, industry regulations, and quality protocols.</li><li>Generate and maintain accurate technical documentation, daily logs, test reports, and commissioning checklists.</li><li>Provide technical guidance and on-the-job training to local teams or subcontractors.</li><li>Travel frequently to domestic and international sites based on project demand.</li></ul>Qualifications:<ul><li>Degree or diploma in Mechanical Engineering, Mechatronics, or a relevant technical discipline.</li><li>Minimum of 5 years of hands-on experience in the installation and commissioning of industrial compressors.</li><li>Proven experience working with or on behalf of major OEMs in the compressor space.</li><li>Familiarity with rotating equipment, lube oil systems, vibration monitoring systems, and alignment tools.</li><li>Strong understanding of P&IDs, mechanical schematics, and technical manuals.</li><li>Demonstrated ability to work independently on complex field assignments under tight schedules.</li></ul>

Field Service Engineer - Compressors

Employment Type: 2 months Mon- Thurs Office / rest from home – 32 hrs per week Start Date – 19th Jan What will you do? As an HR direct officer, you are part of the beating heart of the HR direct team in the Netherlands and all the associated responsibilities. You are in contact with employees, managers and HR business partners from all business units via chat, tickets and telephone and answer their questions. You are part of sub-teams and within those teams you focus on specific topics and processes that you try to improve together. Your tasks and responsibilities: • Answering HR questions via phone, chat, email and tickets • Processing all inflow, throughput and outflow of employees • Timely processing of contract changes • Advising employees on all HR admin related matters • Improving processes Who are you? As our future new colleague, you are an enthusiastic, inquisitive and proactive person who likes to be part of a dynamic team. You are motivated to improve processes and have a passion for HRM. You are not afraid to show initiative and like to think along about innovative solutions. Profile Education level: at least HBO Education background: HRM Interested in: helping people, improving processes, AI Languages: Dutch and English (basic) Skills: Clear and structured communication style, analytically strong Competencies: Proactive, pragmatic, enthusiastic and service-oriented attitude, always looking for a way forward

HR Officer

ROV Pilot/Technician - Offshore Cable Operations Position Summary We are seeking experienced ROV Pilots and Technicians to join our offshore operations teams. You will operate and maintain work-class ROV systems deployed from cable ships for subsea cable burial, post-lay trenching, inspection, and repair operations. This role requires technical expertise, precision, and the ability to work effectively in demanding offshore environments. Key Responsibilities<ul><li>ROV Operations: Pilot work-class ROV systems (including burial tools and trenching equipment) for cable installation and inspection operations</li><li>Cable Operations Support: Execute cable crossings, post-lay inspections, fault location, and repair procedures in various water depths</li><li>Navigation & Positioning: Operate sonar systems, USBL, and telemetry equipment to maintain precise ROV positioning along cable routes</li><li>Maintenance & Troubleshooting: Perform routine preventive maintenance and emergency repairs on ROV systems, TMS, LARS, and associated equipment</li><li>Pre/Post-Dive Checks: Conduct comprehensive system checks and maintain detailed operational logs and dive reports</li><li>Subsea Survey Operations: Support survey activities including route clearance, pre-lay surveys, and as-built documentation</li><li>Team Collaboration: Work closely with Cable Engineers, Survey Teams, and Deck Crew to ensure safe and efficient operations</li><li>Safety Compliance: Adhere to company safety management system (SMS), permit-to-work systems, and international offshore safety standards</li><li>Equipment Mobilisation: Participate in ROV system mobilisations, demobilisations, and vessel transfers</li></ul>Essential Requirements<ul><li>Minimum 3-5 years experience as ROV Pilot/Technician with work-class vehicles</li><li>Proven experience with cable burial/plough systems and subsea trenching equipment</li><li>Technical certification: ROV Pilot/Tech Grade 2 minimum (Grade 1 preferred)</li><li>Offshore certifications: <ul><li>BOSIET/FOET (recognized offshore safety training)</li><li>Valid offshore medical certificate (minimum 6 months validity)</li></ul></li><li>Strong electrical/hydraulic system troubleshooting skills</li><li>Understanding of DP vessel operations and offshore safety protocols</li><li>Fluent English (written and spoken); additional language skills advantageous</li><li>Flexibility to work on rotational basis: typically 28 days on/28 days off (subject to project requirements)</li></ul>Preferred Qualifications<ul><li>High Voltage switching competency</li><li>Experience with various work-class ROV systems from major manufacturers</li><li>Subsea engineering background or relevant degree (mechanical, electrical, marine engineering)</li><li>Previous cable lay experience with telecom or power cable projects</li><li>Sonar operation expertise with industry-standard equipment</li><li>Technical degree or HNC/HND in mechanical/electrical engineering</li><li>Fiber optic cable handling experience</li></ul>Competencies<ul><li>Technical Acumen: Strong understanding of ROV hydraulic, electrical, and electronic systems</li><li>Problem-Solving: Ability to diagnose and repair complex subsea equipment faults under pressure</li><li>Communication: Clear, concise communication with bridge, deck crew, and project engineers</li><li>Attention to Detail: Precision in cable tracking, depth control, and documentation</li><li>Team Player: Collaborative mindset essential for integrated vessel operations</li><li>Adaptability: Comfortable with variable schedules and remote offshore locations</li></ul>

ROV Pilot / Technicians

Overhead Linesman – Distribution Networks Location: Northern Ireland We are looking for an experienced Overhead Linesman to join our client’s team on key distribution network projects. If you take pride in safe, steady, hands-on work and want a role where your skills make a real impact, this role will suit you. What you will do <ul><li>Build, repair, and maintain overhead power lines on LV and HV distribution networks</li><li>Install poles, hardware, conductors, stays, and related equipment</li><li>Work as part of a focused crew to deliver work safely and on time</li><li>Respond to faults and carry out emergency repairs when needed</li><li>Follow all safety procedures and keep accurate job records</li></ul>Required skills <ul><li>Solid training and experience in the electricity industry</li><li>Practical experience with overhead line works</li><li>Strong understanding of Health and Safety and how to apply it on site</li><li>Clear communication skills and a strong team approach</li></ul>

Overhead Linesman

Utility Engineer Start date: ASAP Duration: Long term contract. Location: Asturia: Gijon Spain. Until end of 2026/beginning 2027 remote work, with visits to the site/partners covered via business travel expenses Rotation: Monday-Friday. Description Client information This client stands as a global leader in materials technology, rooted in Belgium with four local sites. We innovate and produce high-performance materials for solar cells, rechargeable batteries, and catalysts, while also recycling precious metals from electronic devices. We aim to be a clear world leader in materials for clean mobility and recycling and have turned our sustainability approach into an even greater competitive advantage. Department description and responsibilities The Utility Engineer is responsible for the design, development, and maintenance of utility systems, including HVAC, water supply, power distribution, and gas networks. This role spans the entire project lifecycle—from concept to completion—ensuring compliance with the highest standards of quality, efficiency, and safety. Key Responsibilities • Be an integral part of the local engineering team based in Spain. • Serve as the primary point of contact for all discussions with engineering partners and contractors, ensuring clear communication and alignment on project objectives. • Provide technical oversight for utility systems throughout design and execution phases. • Optimize system performance and ensure compliance with regulatory requirements. • Collaborate closely with engineering partners and contractors during construction activities. • Manage overall project execution for utility-related workstreams, ensuring timelines and quality standards are met. Project Description The project involves the design, construction, and commissioning of a state-of-the-art facility in Gijón, Spain, dedicated to the production of Precursor Cathode Active Material (PCAM) and associated refining processes. This facility will play a critical role in supporting the growing demand for advanced battery materials, enabling sustainable energy solutions for the European market. We are looking for local Spanish contractors. Tasks and Responsibilities • Act as technical lead for all project aspects related to HVAC and utilities • Ensure compliance of assigned tasks with global engineering standards across the site • Take full technical responsibility for construction and commissioning activities within assigned disciplines • Demonstrate ownership and accountability for dedicated disciplines, introducing improvements, selecting optimal solutions, and safeguarding technical and financial interests (CAPEX and OPEX) • Lead discussions on safety, design, construction progress, cost, and other project aspects • Monitor and support procurement of critical equipment for investment projects • Share knowledge and expertise within the local Utilities Engineering team and Global Engineering Team • Review and provide feedback on all technical documentation (designs, as-built documentation, specifications, datasheets, material approvals, change requests, RFIs, submittals) • Evaluate scopes of work for future investments for completeness and technical soundness • Align technical solutions with designers and ensure consultation with Asset Management and Operations departments • Monitor site irregularities and take corrective actions per agreed processes • Verify equipment supplier schedules and subcontractor progress reports • Control costs related to construction implementation and validate additional work proposals for technical and financial feasibility • Identify and execute cost-saving opportunities through technical re-evaluation of contractor offers in collaboration with the CAPEX team • Optimize technical solutions, equipment, and processes with a strong focus on OPEX savings • Capture and implement lessons learned into future projects • Support civil and construction design projects from initial planning and concept design to final implementation and testing • Check detailed technical drawings, including P&ID diagrams, and ensure proper documentation for design processes • Collaborate with cross-functional teams, including engineers, vendors, and clients, to ensure seamless project execution • Address technical challenges, optimize designs for performance and manufacturability, and provide solutions during development and implementation phases Technical Requirements • 7 years experience within Utilities design and commissioning within an industrial engineering environment. • Experience with AutoCad, Plant 3D, Naviswork and Autodesk • Experience in managing greenfield projects under EPCm and EPC contract models • Minimum 3 years of professional experience working on construction sites • Solid understanding and application of health and safety regulations Non-Technical Requirements • Ability to work independently and as part of a team. • Demonstrated ability to identify, define, and resolve complex problems effectively • Skilled in assessing needs and driving organizational change initiatives • Strong analytical thinking and problem-solving capabilities • Self-motivated, open-minded, and adaptable to dynamic environments • Positive attitude with a proactive approach to challenges and new opportunities • Expertise in anticipating potential risks and implementing mitigation strategies Academic Requirements • Bachelor’s or Master’s degree in Mechanical Engineering, Electromechanics, or a related field Language Proficiencies • Fluent in Spanish and English, both spoken and written • Strong practical English skills to read and interpret technical documents • Ability to conduct technical and safety discussions confidently in English Location: • North of Spain, region of Asturia: Gijon • Until end of 2026/beginning 2027 remote work, with visits to the site/partners covered via business travel expenses Business Travel: • Travel will be required inside (mainly Barcelona) and outside Spain • Expenses reimbursed via Expense sheet Contract: • Long term collaboration envisioned • Start: as soon as possible, notice periods can be considered Rate: • Market-level Rates for Spain • All-in Rates • no expenses allowed except pre-approved business travel Skills Experience in managing greenfield projects under EPCm- 7 Years Experience with Autocad - 5 Years Experience with Autodesk - 5 Years Experience with Naviswork - 5 Years Experience with Plant 3D - 5 Years Experience within Utilities design and commissioning within an industrial engineering environment. - 7 Years

Utilities Engineer

My client is a global leader in materials technology based in Belgium with four local sites. They are also expanding their presence across Europe with sites in Gijon too. The Utility Engineer is responsible for the design, development, and maintenance of utility systems, including HVAC, water supply, power distribution, and gas networks. This role spans the entire project lifecycle—from concept to completion—ensuring compliance with the highest standards of quality, efficiency, and safety. Key Responsibilities <ul><li>Be an integral part of the local engineering team based in Spain.</li><li>Serve as the primary point of contact for all discussions with engineering partners and contractors, ensuring clear communication and alignment on project objectives.</li><li>Provide technical oversight for utility systems throughout design and execution phases.</li><li>Optimize system performance and ensure compliance with regulatory requirements.</li><li>Collaborate closely with engineering partners and contractors during construction activities.</li><li>Manage overall project execution for utility-related workstreams, ensuring timelines and quality standards are met.</li></ul> The project involves the design, construction, and commissioning of a state-of-the-art facility in Gijón, Spain, dedicated to the production of Precursor Cathode Active Material (PCAM) and associated refining processes. This facility will play a critical role in supporting the growing demand for advanced battery materials, enabling sustainable energy solutions for the European market. We are looking for local Spanish contractors. Tasks and Responsibilities <ul><li>Act as technical lead for all project aspects related to HVAC and utilities</li><li>Ensure compliance of assigned tasks with Umicore global engineering standards across the site</li><li>Take full technical responsibility for construction and commissioning activities within assigned disciplines</li><li>Demonstrate ownership and accountability for dedicated disciplines, introducing improvements, selecting optimal solutions, and safeguarding Umicore’s technical and financial interests (CAPEX and OPEX)</li><li>Lead discussions on safety, design, construction progress, cost, and other project aspects</li><li>Monitor and support procurement of critical equipment for investment projects</li><li>Share knowledge and expertise within the local Utilities Engineering team and Global Engineering Team</li></ul> Technical Requirements <ul><li>7 years experience within Utilities design and commissioning within an industrial engineering environment.</li><li>Experience with AutoCad, Plant 3D, Naviswork and Autodesk</li><li>Experience in managing greenfield projects under EPCm and EPC contract models</li><li>Minimum 3 years of professional experience working on construction sites</li><li>Solid understanding and application of health and safety regulations</li><li>Fluent in Spanish and English, both spoken and written</li></ul> For more information and full job description, do not hesitate to get in touch!

Utility Engineer

Warehouse and Operations Coordinator Duration: 01/2026 – 11/2026 Location: Offshore Essex Rotation: 2/2 Warehouse: Working with the SOV Operations Coordinator, Stores Manager and the Senior Technician to maintain a suite of operational procedures and processes to ensure all parts, consumables tools and PPE is received, shipped and tracked efficiently. To include inventory, tool, certification and calibration, PPE and waste management. Follow the waste management plan that looks to segregates the waste streams at source, allows clear identification and storage of waste onboard the vessel and a controlled and efficient demobilisation process to shore side receptacles. Maintain communication channels and points of contacts between the offshore team, the SOV back office and the shore based fleet team. To include stock adjustments process, PPE and tooling requirements, certification & calibration, adhoc parts requests for trouble shooting and quality checks/ queries. Collation of picklists / requests from the Senior Technicians and /or Stores Manager. Create, identification and quality checking of service bundles/kits for the next 24 hours work prior to mobilisation. Respond to adhoc requests from the service teams on the WTG’s and clear handover to the Single point of contact for the vessel crew for all craning and deck work both operational at sea and alongside the quay. In collaboration with the SOV Stores Manager support the planning of port calls with vessel team, shore-based teams communicating same to all stakeholders, ensuring that port call activities are planned and implemented to mitigate risk of vessel delay. Communicate purchasing requests to the shore-based team in a timely manner to avoid any unnecessary mobilisation or servicing delays. Operations Coordinator: Delivery of toolbox talks prepared by either the SOV operations Coordinator or the Senior Technician. Ensuring that the teams accessing the WTG’s have all the information, documentation, tooling and parts to enable them to complete their allotted tasks Receive, review and file documentation received from the offshore teams in line with the established processes Act as the Operational Controller by Stopping, Starting and Yawing turbines into position for SOV approach. Supporting Technician team on the turbines from the SOV back office when the Senior Technician / Operations Coordinator are not available. DELIVERABLES <ul><li>Service kits are presented at the WTG for the technicians to quality, time.</li><li>On vessel stores is maintained appropriate for the scheduled work and in a manner that supports time and safe efficient mobilisation of the technical team.</li><li>Waste and product return 100% accounted for.</li><li>All parts, tools and consumables 100% allocated to the WTG and site in CMMS</li><li>Toolbox talks and pre work briefs are delivered to a standard that avoids ambiguity.</li><li>Authorised Operational Controller</li></ul> CERTIFICATIONS <ul><li>GWO – Advanced First Aid, Sea Survival, Manual Handling, Fire Awareness</li><li>Slinger/Signaller</li><li>IOSH Managing Safely.</li></ul> OTHER REQUIREMENTS <ul><li>SAP materials management user</li><li>Experience in stock control</li><li>Ability to travel and work in Germany – no visa required as working outside 12NW territorial limits.</li><li>Ideally experience of using SCADA / Turbine control systems</li></ul>

Warehouse and Operations Coordinator

Working with the SOV Operations Coordinator, Stores Manager and the Senior Technician to maintain a suite of operational procedures and processes to ensure all parts, consumables tools and PPE is received, shipped and tracked efficiently. To include inventory, tool, certification and calibration, PPE and waste management. Delivery of toolbox talks prepared by either the SOV operations Coordinator or the Senior Technician. Ensuring that the teams accessing the WTG’s have all the information, documentation, tooling and parts to enable them to complete their allotted tasks DELIVERABLES <ul><li>Service kits are presented at the WTG for the technicians to quality, time.</li><li>On vessel stores is maintained appropriate for the scheduled work and in a manner that supports time and safe efficient mobilisation of the technical team.</li><li>Waste and product return 100% accounted for.</li><li>All parts, tools and consumables 100% allocated to the WTG and site in CMMS</li><li>Toolbox talks and pre work briefs are delivered to a standard that avoids ambiguity.</li><li>Authorised Operational Controller</li></ul> CERTIFICATIONS <ul><li>GWO – Advanced First Aid, Sea Survival, Manual Handling, Fire Awareness</li><li>Slinger/Signaller</li><li>IOSH Managing Safely.</li></ul> OTHER REQUIREMENTS <ul><li>SAP materials management user</li><li>Experience in stock control</li><li>Ability to travel and work in Germany – no visa required as working outside 12NW territorial limits.</li><li>Ideally experience of using SCADA / Turbine control systems</li></ul> For full job description, do not hesitate to get in touch!

As an Authorised Person (AP), you will ensure electrical safety during switching operations and issue safety documents in accordance with established Electrical Safety Rules. You will apply isolations, supervise working parties, and maintain safe working practices on electrical systems up to 33kV. Key Responsibilities <ul><li>Perform switching operations within your authorisation level.</li><li>Apply isolations and safety precautions per procedures.</li><li>Prepare, issue, and cancel Safety Documents (e.g. LVPTW, LOA).</li><li>Supervise Competent Persons and working parties.</li><li>Conduct “Prove Dead” procedures before work begins.</li><li>Ensure clear work area demarcation and safety boundaries.</li><li>Coordinate with the Control Engineer for system release and restoration.</li><li>Maintain general safety and report hazards or process breaches.</li><li>Complete risk assessments and method statements for all tasks.</li></ul>Requirements <ul><li>Electrical trade background or equivalent qualification.</li><li>Recognised AP training and written appointment by an Authorising Engineer.</li><li>Knowledge of LV/HV switchgear, isolation principles, and safety protocols.</li><li>Familiarity with safety documentation and standards (e.g. EN 50110-1).</li><li>Proven supervisory and procedural compliance experience.</li></ul>Benefits Competitive salary and benefits package with opportunities for professional development, collaboration with industry experts, and a strong focus on work-life balance.

Authorised Person

Electrical Authorised Person Location – Amsterdan Also other European locations Key Responsibilities Safety <ul><li>Enforce company procedures including Control of Hazardous Energies, Permit to Work, and Lock-Out Tag-Out (LOTO) systems.</li><li>Ensure compliance with the Electrical Safe System of Work (ESSOW) and client safety directives.</li><li>Review and approve subcontractor electrical RAMS and COHE documentation.</li><li>Manage and control LOTO systems, safe switching, energisations, and isolations during commissioning.</li><li>Conduct regular safety audits, inspections, and incident reporting.</li><li>Ensure correct use, selection, and maintenance of electrical PPE and arc flash mitigation procedures.</li></ul>Technical <ul><li>Perform commissioning, testing, troubleshooting, and inspection of LV/MV electrical systems, including MCCs, VSDs, switchgear, and distribution panels.</li><li>Read and interpret technical drawings, SLDs, and wiring diagrams.</li><li>Complete and record all pre- and post-energisation testing in compliance with local regulations.</li><li>Support all commissioning phases (Levels 1–5) and enforce the Electrical Permit to Work system.</li><li>Assist in electrical incident investigations and ensure safety and calibration of testing equipment.</li><li>Execute safe switching schedules and energisation procedures under SAP direction.</li></ul>

Electrical MV AP

Senior Authorised Person (SAP) The Role We are seeking an experienced Senior Authorised Person (SAP) to take a critical role in ensuring safety from the system across HV and LV electrical networks. You will be responsible for the preparation, issue, and cancellation of Safety Documents, leading switching operations, and overseeing safe systems of work in line with company procedures and industry standards. This role requires strong technical expertise, sound judgement, and proven leadership skills to supervise and mentor Authorised Persons (APs) and Competent Persons (CPs), while liaising closely with Control Engineers and commissioning teams. Key Responsibilities <ul><li>Carry out HV and LV switching operations within your level of authorisation</li><li>Apply isolations, earthing, and safety precautions in accordance with written procedures</li><li>Prepare, issue, suspend, and cancel Safety Documents (LVPTW, LOA, HVPTW, SFT)</li><li>Write, review, and implement Switching Schedules</li><li>Lead and supervise working parties during electrical works</li><li>Conduct “Prove Dead” procedures prior to commencement of work</li><li>Ensure clear demarcation and identification of work areas</li><li>Liaise with Control Engineers for system release and restoration</li><li>Escalate hazards, defects, and abnormal conditions appropriately</li><li>Confirm system readiness for energisation and safe handover</li><li>Coordinate with Control Engineers and Testing Teams during commissioning</li><li>Conduct energisation readiness reviews and sign off Power On Requests</li><li>Maintain accurate logs, records, and control documentation</li><li>Carry out toolbox talks and routine audits to promote compliance</li></ul>Requirements <ul><li>Extensive experience working on HV and LV electrical networks</li><li>Current written appointment as a Senior Authorised Person (SAP)</li><li>Strong knowledge of switching schedules, isolation procedures, and safety rules</li><li>Familiarity with industry standards and safety documentation (e.g. EN 50110-1)</li><li>Proven supervisory, mentoring, and leadership experience</li><li>Recognised electrical engineering qualification or equivalent practical experience</li></ul>Apply now to play a key role in delivering safe, reliable electrical operations.

Senior Authorised Person

Senior Authorised Person (SAP) The Role We are seeking an experienced Senior Authorised Person (SAP) to take a critical role in ensuring safety from the system across HV and LV electrical networks. You will be responsible for the preparation, issue, and cancellation of Safety Documents, leading switching operations, and overseeing safe systems of work in line with company procedures and industry standards. This role requires strong technical expertise, sound judgement, and proven leadership skills to supervise and mentor Authorised Persons (APs) and Competent Persons (CPs), while liaising closely with Control Engineers and commissioning teams. Key Responsibilities <ul><li>Carry out HV and LV switching operations within your level of authorisation</li><li>Apply isolations, earthing, and safety precautions in accordance with written procedures</li><li>Prepare, issue, suspend, and cancel Safety Documents (LVPTW, LOA, HVPTW, SFT)</li><li>Write, review, and implement Switching Schedules</li><li>Lead and supervise working parties during electrical works</li><li>Conduct “Prove Dead” procedures prior to commencement of work</li><li>Ensure clear demarcation and identification of work areas</li><li>Liaise with Control Engineers for system release and restoration</li><li>Escalate hazards, defects, and abnormal conditions appropriately</li><li>Confirm system readiness for energisation and safe handover</li><li>Coordinate with Control Engineers and Testing Teams during commissioning</li><li>Conduct energisation readiness reviews and sign off Power On Requests</li><li>Maintain accurate logs, records, and control documentation</li><li>Carry out toolbox talks and routine audits to promote compliance</li><li>Support the Authorising Engineer in assessing and mentoring new SAP, AP, and CP candidates</li></ul>Requirements <ul><li>Extensive experience working on HV and LV electrical networks</li><li>Current written appointment as a Senior Authorised Person (SAP)</li><li>Strong knowledge of switching schedules, isolation procedures, and safety rules</li><li>Familiarity with industry standards and safety documentation (e.g. EN 50110-1)</li><li>Proven supervisory, mentoring, and leadership experience</li><li>Recognised electrical engineering qualification or equivalent practical experience</li></ul>Apply now to play a key role in delivering safe, reliable electrical operations.

Senior Commissioning Manager – Data Centre  As Senior Commissioning Manager on a Project Management Consultancy (PMC) assignment, you’ll represent the client on a hyperscale data centre project, providing independent oversight of all commissioning activities. You’ll lead the commissioning strategy, coordinate key stakeholders, and ensure all systems are tested, validated, and handed over to the highest standards of quality and reliability. Key responsibilities<ul><li>Lead and deliver the commissioning strategy and programme</li><li>Manage the full commissioning lifecycle, including quality and compliance</li><li>Oversee client-appointed commissioning teams and third-party vendors</li><li>Coordinate design, construction, and commissioning interfaces</li><li>Review commissioning scripts, documentation, and site activities</li><li>Monitor progress, resolve issues, and report against milestones and budgets</li></ul>About you<ul><li>Strong experience commissioning large-scale data centre projects</li><li>Solid technical knowledge of electrical and mechanical systems (UPS, generators, cooling, switchgear)</li><li>Able to develop and manage commissioning plans and schedules</li><li>Engineering or construction-related degree, or equivalent experience</li><li>Based in or willing to relocate to Farciennes, with the legal right to work</li><li>Confident communicator with strong stakeholder management skills</li></ul>

Senior Commissioning Manager - Data Center

Senior Commissioning Manager – Data Centre  As Senior Commissioning Manager, you’ll represent the client on a hyperscale data centre project, providing independent oversight of all commissioning activities. You’ll lead the commissioning strategy, coordinate key stakeholders, and ensure all systems are tested, validated, and handed over to the highest standards of quality and reliability. Key responsibilities<ul><li>Lead and deliver the commissioning strategy and programme</li><li>Manage the full commissioning lifecycle, including quality and compliance</li><li>Oversee client-appointed commissioning teams and third-party vendors</li><li>Coordinate design, construction, and commissioning interfaces</li><li>Review commissioning scripts, documentation, and site activities</li><li>Monitor progress, resolve issues, and report against milestones and budgets</li></ul>About you<ul><li>Strong experience commissioning large-scale data centre projects</li><li>Solid technical knowledge of electrical and mechanical systems (UPS, generators, cooling, switchgear)</li><li>Able to develop and manage commissioning plans and schedules</li><li>Engineering or construction-related degree, or equivalent experience</li><li>Based in or willing to relocate to Farciennes, with the legal right to work</li><li>Confident communicator with strong stakeholder management skills</li></ul>

Senior Commissioning Manager

Project Manager – Electrical (LV/ELV) We are looking for an experienced LV/ELV Project Manager to lead electrical systems delivery on a mission-critical data centre project. You will manage the full project lifecycle, ensuring quality, compliance, and smooth coordination across all stakeholders. Responsibilities: <ul><li>Oversee design, installation, commissioning, and handover of LV/ELV systems. </li><li>Manage project milestones, budgets, and scope. </li><li>Serve as the main contact for clients, contractors, and internal teams. </li><li>Ensure compliance with safety and regulatory standards through inspections and audits. </li><li>Identify and mitigate risks, escalating issues when needed. </li><li>Collaborate with multidisciplinary teams for integrated delivery solutions. </li></ul>Requirements: <ul><li>5 years’ electrical project management experience, ideally in data centres. </li><li>Expertise in LV and ELV systems; strong knowledge of European standards. </li><li>Proven track record of managing complex projects. </li><li>Excellent communication and stakeholder management skills; English required, French a plus. </li><li>Degree in Electrical Engineering or related field; PMP desirable. </li><li>Detail-oriented, proactive, and results-driven. </li></ul>

Project Manager - LV/ELV

Offshore Senior HSE Advisor Description: Description & Responsibilities: The Senior HSE advisor promotes and provides professional expert knowledge and guidance to managers, supervisors, employees and contractors on safe work practices, safety standards, and legal regulations. And supports identification and elimination of potential hazards and ensures control measures are in place. Line Reference: • Head of Regional QHSE Advisors, Europe Project Reference: • Project QHSE Director Success criteria: • Maintain HSE expert knowledge on best practice and legal requirements. ◦ Secure HSE conformity using agreed processes and legal registers. ◦ Support and promote development and use of client management systems. ◦ Proactive approach to risk management. • Technical - and people skills. ◦ Be clear, effective, and positive in verbal and written communication. ◦ Maintain successful cooperation / collaboration with the HSE stakeholders. • High work ethic and excellent behaviours. ◦ Demonstrate efficient and timely collaboration internally /externally. ◦ Report reliable and timely HSE data. ◦ Demonstrate analytical and structured approach to daily workload. It is generally the expectations that the advisor can apply advanced HSE skills to the position. Has experience within subject area and knows fundamental concepts, practices, and procedures related to HSE and knows how to routinely apply knowledge of theories, methods, techniques, and processes to scope of work. Typical tasks (not exhaustive): • Drive and promote a good proactive HSE culture through leading by example, cultural engagement, using data, raising awareness, knowledge sharing, and lessons learned (registration and implementation). • Demonstrate and promote data driven risk management through a proactive reporting culture and high-quality data management. ◦ Support ongoing development, implementation, and use of client systems, procedures, instructions, and associated HSE documentation. ◦ Instructions, procedures, contingency plans. ◦ HSE Management system (way we work) / QHSE process landscape. ◦ Global/local Emergency Response / Crisis Management. ◦ Audit/compliance check (ISO 9001/14001/45001/55001). • Planning, facilitation / participation of Safety meetings, Toolbox Talks, briefings, Safety Walks, inspections, HAZID/HAZOP workshops and employer cultural programms and campaigns. • Review of HSE documentation, Risk Assessments & Method Statements (RAMS). • Monitoring and assessment of internal/external HSE compliance and - performance using client incident reporting tool (Synergi) for reporting, trend analysis etc. • Coordinate and report safety inspections, incident investigations, root cause analyses, and report derived observations, risks, and lessons learnt. • Effective liaison with contractors at management and site levels to establish and improve safety, health and environmental culture. • Participate and contribute to all relevant site HSE meetings. • Participate in audits (internal and external). • Follow up on findings from HSE related audits, inspections, incident investigation and support implementation of NCR’s. • Reporting LTIs to HSE organisation in accordance with the process. • Ad hoc advise on questions regarding HSE in daily work (e.g. management, technicians, internal and external). • Ensure the validity of own safety/training certificates as required. • Be proactive in maintaining own competence levels required for the role. Deliverables: • Facilitation of regular HSE meetings with Contractor and package representatives. • Review of Risk Assessed Method Statements (RAMS). • Operational HSE Assessment. • Perform HSE induction of Clients Representatives. • Perform HSE presentations at kick off meetings. • HSE walk reports (e.g. using DIT). • Entry of incidents and proactive measures in Synergi. • Other deliverables and as per Project (Q)HSE Risk management processes and AP QHSE Management framework. Decision authority: The QHSE function is not the exclusive owner of HSE and therefore does not hold the authority to determine HSE performance on its own. However, a HSE Advisor is a subject matter expert and can therefore contribute to decision-making based on personal level of understanding of the business and the interdependencies with other departments. Key Interfaces to Other Functions / Stakeholders: • QHSE leadership managers. • Project - & Construction Managers. • Client representatives. • Local regulators/authorities. • Client employees. • Contractors at site. Requirements and Qualifications: • English language skills. • Relevant academic or technical background. • Minimum 3-5 years’ work experience with HSE, ideally from onshore renewables/ offshore windfarm construction. • Excellent interpersonal skills, strong communication and presentation skills. • IT literate (Microsoft office package, knowledge of Synergi is an advantage). • Knowledge of route cause analysis and incident investigation. • Demonstratable experience in dealing with 3rd party contractors in relation to HSE. • Completed NEBOSH; (minimum level 3), or similar recognized HSE qualification. • In date site safety passport (CCNSG or CSCS). • Current clean UK driver’s license. Desirable qualifications/experience: • QHSE BSC, Diploma or equivalent level 6 qualification. • NEBOSH or IEMA Environmental Management qualifications. • Qualified/certified Auditor. • Experienced in delivery of training courses / material. • Prior client experience is beneficial. The consultant must comply with and provided client training and medical requirements. Working conditions / Locations: The role will initially be onshore based, working from the site office at Humberside airport. Once offshore works commence, the work will be both onshore and offshore. Flexibility is required for occasional off project site visits for company and supplier internal/external meetings, which may also be overseas. • The normal shift pattern for onshore works is a 5-day week (Monday – Friday), 8-hour days. • There may be some flexibility for occasional working from home if authorised by project management. Office location: Hornsea Zone, Humberside Airport, Kirmington, North Lincolnshire. DN39 6YH IT: • Required IT equipment (laptop etc.) is supplied by the client. <ul><li>The Consultant must bring their own iPhone. External consultants’ equipment such as PCs, mobile phones and iPads must always be up to date with the latest iOS release.</li><li>The owner must allow client Air Watch security and management software for iPhones and iPads to be installed. The app is mandatory on all mobile devices used by client staff (including External consultants) to protect them from cybercrime.</li><li>The owner must grant approval for client to remove apps, data, and access from privately owned equipment if it is deemed to pose a risk in relation to client security or the GDPR regulations, if the equipment is lost/stolen, or if the owner ceases to have an active contract with Magnit. When an external consultant leaves the client, they must contact the IT Service Desk to remove all client apps and data.</li><li>The IT Service Desk can only support privately owned equipment in connection with client Air Watch security and management software.</li></ul> Special Terms: • Option to extend up to 12 months. Requirements and Qualifications: • English language skills. • Relevant academic or technical background. • Minimum 3-5 years’ work experience with HSE, ideally from onshore renewables/ offshore windfarm construction. • Excellent interpersonal skills, strong communication and presentation skills. • IT literate (Microsoft office package, knowledge of Synergi is an advantage). • Knowledge of route cause analysis and incident investigation. • Demonstratable experience in dealing with 3rd party contractors in relation to HSE. • Completed NEBOSH; (minimum level 3), or similar recognized HSE qualification. • In date site safety passport (CCNSG or CSCS). • Current clean UK driver’s license. Work Pattern: Initially Mon - Fri but will be expected to stay offshore at times once offshore construction commences.

Senior HSE Advisor

Senior Works Manager Duration: 19-01-2026 - 02/02/2026 Location: International Waters Project: Doggerbank C Description: Client information This client is a world leader in the highly specialised fields of dredging, solutions for the offshore energy market, infra marine and environmental works. With more than 140 years of experience and 5,200 highly skilled professionals, we bring tailor-made solutions, innovation and new technologies to our customers’ projects, ensuring that they are performed safely, efficiently and cost-effectively. Department Description and responsibilities As a Works Manager, you are responsible for the operational execution of the works on site. You can rely on a team of site superintendents and project engineers. You report directly to the project manager. You focus on the bigger scheme of things whereas the superintendents deal with day to day issues. We are currently looking for an experienced Works Manager who can manage (large) offshore installation projects, having both a strong engineering but also installation background. Primary Tasks and responsibilities -Communicate clearly with project engineers, project management and Clients. -Take the responsibility towards organization of the works and ensure they are carried out in accordance to the method statement and in a safe way. -Accurately monitor the progress of projects. -Assist in the coordination of the work on site, optimize and correct if necessary. -Report about budget and cost control in close collaboration with the project manager. Technical profile requirements -7 Years of relevant (offshore) work experience. -Strong project management and planning skills. -Extensive experience working in Highsafety environments. Non-Technical profile requirements Good communication skills and able to take a critical view towards the works to be carried out. Work well in teams, where you are able to support the other persons in your team and lead the workforce in the field. Methodology/Certification requirements -Bachelor or Master degree in Engineering. -Full GWO Language proficiencies -Fluent proficiency in English is required (written and spoken). -Proficiency in other languages is a plus.

Senior Works Manager

Electrical Design Engineer Earthstream are recruiting for an Electrical Design Engineer to join our client, a specialist in control system design, software development, and manufacturing services for industrial machinery. This is an excellent opportunity to join a growing company that fosters creativity, values innovation, and provides strong career development. You will play a key role in designing innovative electrical and control systems across diverse projects, with opportunities to travel to site during various project phases (frequency dependent on project requirements). The Role<ul><li>Design and develop electrical and control systems using EPlan Electric and EPlan Pro Panel software (training available for strong AutoCAD users).</li><li>Produce comprehensive design documentation, including:<ul></ul></li><li>Title pages, revision overviews, explanatory documents, and safety evaluation reports</li><li>Layouts (machine/plant, bus network, electrical arrangements)</li><li>Multi-line and single-line diagrams, PLC overviews, terminal and cable diagrams</li><li>Parts lists, summarised reports, macros, and plot frames</li><li>Generate reports such as BOMs, wire/cable labels, and device tag labels using Excel. Essential Skills & Experience<ul><li>HND in Electrical Engineering (or related field).</li><li>Strong understanding of safety, regulatory, and quality standards (HSE, ISO).</li><li>Proficiency in EPlan Electric and Pro Panel (or strong AutoCAD skills with willingness to learn EPlan).</li><li>Solid knowledge of electrical and control components.</li><li>Ability to read and interpret electrical drawings.</li><li>Excellent problem-solving skills and strong attention to detail.</li><li>Confident working independently as well as within a collaborative team.</li><li>Strong communication skills.</li></ul> This role offers the chance to work on cutting-edge industrial automation projects, gain training in advanced software, and grow with a supportive and innovative business.  </li></ul>

Electrical Design Engineer

Hydrographic Surveyor Duration: 12-Jan-2026 - 31-Dec-2026 Business Unit: Construction Rotation: Monday-Friday, 8 hours a day Location: Leba or Gdansk, Poland Type: Freelance contract Description: Hydrographic Surveyor You’ll be part of the Geoscience Construction Management team where you, together with your colleagues, will oversee survey operations, analyze geospatial data, and collaborate closely with installation managers. As a team, we value precision, teamwork, and a proactive approach to problem-solving. You’ll play an important role in: · Providing hydrographic survey expertise under Polish legislative requirements · Reviewing and accepting Installation Contractors procedures for survey and geoscience related tasks, and reviewing, accepting and distributing Installation Contractors progress and final as-built survey datasets · Procuring and managing the review, accept and distribution of data acquired by an internal survey support service · internal survey support service for bathymetric and sub-bottom surveys · Reviewing, accepting, distributing and data acquired by the internal survey support service · Providing expertise on ground conditions on site for installation works · Reviewing of project documentation, method statements, reporting and documentation related to sub-sea and sub-seabed installation and positioning requirements · Managing QA/QC and accepting of pre, during and post-installation surveys · Interfacing between Installation Packages as construction progresses · Owning the residual risk management for UXO during construction · Delivering certain transfer reports from Construction into Operations and Maintenance phase · Office (Leba or Gdansk) based role with occasional offshore vessel visits. · 5 day working week, 8 hours/day with occasional additional hours as the project requires Requirements: PLEASE NOTE: There is no target rate on this request. We kindly ask you to submit your matching candidates to the best market rate. Please notice that we are asking for a daily rate. To succeed in the role, you: · must have a Polish Hydrographic Cat A surveyors license · Have experience with hydrographic surveys and offshore construction works · Have a proactive and systematic approach to your work tasks and experience with interfacing with design, engineering and installation teams · Thrive in an international environment and be able to create good relationships with your stakeholders · Are bilingual in Polish and English. · GWO basic offshore certificates

Hydrographic Surveyor

Risk and Change Manager Location: Charleroi / Farciennes, Belgium Focus: 30% Risk Management, 70% Change Management We are seeking an experienced Risk and Change Manager to join a project management consultancy team delivering large, complex construction projects in Belgium. This role suits someone who thrives with senior stakeholders, values structure, and can balance detailed analysis with clear communication. Key Responsibilities: <ul><li>Manage Early Warning Notification (EWN), risk, and change processes. </li><li>Lead EWN, risk, and change review meetings with stakeholders. </li><li>Track, escalate, and communicate risks and change orders. </li><li>Maintain accurate risk and change databases and documentation. </li><li>Assess impacts, costs, and schedule implications with subject matter experts. </li><li>Develop stress-test scenarios for extreme risks. </li><li>Prepare risk and change updates for monthly reports. </li><li>Track project contingency and change order logs; report directly to the project owner. </li></ul>Requirements: <ul><li>Degree or equivalent experience in a relevant field with strong risk/change management expertise. </li><li>Experience on large-scale, complex construction projects. </li><li>Familiarity with risk tools (Safran Risk, Primavera Risk Analysis, @Risk) and ARM, Xactium, or RiskPredict. </li><li>Knowledge of ISO 31000, COSO, AACE, and PMI risk guidelines. </li><li>Strategic and analytical mindset; detail-focused and organized. </li><li>Fluent in English; legal right to work in Belgium; willing to relocate to Farciennes. </li><li>Comfortable in fast-paced, changing environments. </li></ul>

Risk and Change Manager

Senior Construction Manager We are seeking an experienced Senior Construction Manager on a major DC project, where you will lead site-based delivery across multiple construction packages, ensuring works are delivered safely, on programme, and to the highest quality standards. Key Responsibilities <ul><li>Lead and manage a team of Construction Package Managers.</li><li>Oversee daily site activities and coordinate multiple work packages.</li><li>Ensure alignment with programme, quality, health & safety, and commissioning requirements.</li><li>Act as the primary interface between the client and contractors.</li><li>Identify, manage, and escalate risks, issues, and delays.</li><li>Support quality inspections and commissioning readiness.</li><li>Produce clear progress reports and updates for senior stakeholders.</li></ul>This is a senior, client-facing role offering the opportunity to influence delivery on a large-scale, high-profile project.   Full Job Description is available on request.

Senior Construction Manager - Date Center 

Onshore Senior HSE Advisor  Duration: 02-Feb-2026 - 31-Jan-2027 (Options to extend) Business Unit: QHSE Location: Hitachi Construction Site, Main Road, B1113, Swardeston, NR14 8DU Rotations: Monday-Friday, 10 hours a day IR35: Inside IR35 Description: Description & Responsibilities: The HSE advisor promotes and provides professional expert knowledge and guidance to managers, supervisors, employees and contractors on safe work practices, safety standards, and legal regulations, and supports identification and elimination of potential hazards and ensures control measures are in place. Line Reference: • Head of Regional QHSE Advisors, Europe Project Reference: • Project QHSE Director, & Project HSE Manager Success Criteria/KPIs: • Maintain HSE expert knowledge on best practice and legal requirements. ◦ Secure HSE conformity using agreed processes and legal registers. ◦ Support and promote development and use of management systems. ◦ Proactive approach to risk management. • Good technical - and people skills. ◦ Be clear, effective, and positive in verbal and written communication. ◦ Maintain successful cooperation / collaboration with the HSE stakeholders. • High work ethic and excellent behaviour. ◦ Demonstrate efficient and timely collaboration internally /externally. ◦ Report reliable and timely HSE data. ◦ Demonstrate analytical and structured approach to daily workload. It is generally the expectations that the advisor can apply advanced HSE skills to the position; has experience within subject area and knows fundamental concepts, practices, and procedures related to HSE and knows how to routinely apply knowledge of theories, methods, techniques, and processes to scope of work. Typical tasks (not exhaustive): • Drive and promote a good proactive HSE culture through leading by example, cultural engagement, using data, raising awareness, knowledge sharing, and lessons learned (registration and implementation) • Demonstrate and promote data driven risk management through a proactive reporting culture and high-quality data management. ◦ Support ongoing development, implementation, and use of systems, procedures, instructions, and associated HSE documentation i.e.: ◦ Instructions, procedures, contingency plans ◦ HSE Management system (way we work) / QHSE process landscape. ◦ Global/local Emergency Response / Crisis Management ◦ Audit/compliance check (ISO 9001/14001/45001/55001) • Planning, facilitation / participation of Safety meetings, Toolbox Talks, briefings, Safety Walks, inspections, HAZID/HAZOP workshops and employer cultural programmes and campaigns • Review of HSE documentation, Risk Assessments & Method Statements (RAMS) • Monitoring and assessment of internal/external HSE compliance and - performance using the client incident reporting tool (Synergi) for reporting, trend analysis etc. • Coordinate and report safety inspections, incident investigations, root cause analyses, and report derived observations, risks, and lessons learnt. • Effective liaison with contractors at management and site levels to establish and improve safety, health and environmental culture. • Participate and contribute to all relevant site HSE meetings. • Participate in audits (internal and external) • Follow up on findings from HSE related audits, inspections, incident investigation and support implementation of NCR’s. • Reporting LTIs to HSE organisation in accordance with the process • Ad hoc advise on questions regarding HSE in daily work (e.g. management, technicians, internal and external). • Ensure the validity of own safety/training certificates as required. • Be proactive in maintaining own competence level required for the role. Deliverables: • Facilitation of regular HSE meetings with Contractor and package representatives • Review of Risk Assessed Method Statements (RAMS) • Operational HSE Assessment • Perform HSE induction of Clients Representatives • Perform HSE presentations at kick off meetings. • HSE walk reports (e.g. using DIT) • Entry of incidents and proactive measures in Synergi • Other deliverables and as per Project (Q)HSE Risk management processes and AP QHSE Management framework Decision authority: The QHSE function is not the exclusive owner of HSE and therefore does not hold the authority to determine HSE performance on its own. However, a HSE Advisor is a subject matter expert and can therefore contribute to decision-making based on personal level of understanding of the business and the interdependencies with other departments. Key Interfaces to Other Functions / Stakeholders: • QHSE leadership managers • Project - & Construction Managers • Client representatives • Local regulators/authorities • Contractors at site Working conditions / Locations The role is onshore site based at the Converter Station & Battery Storage facility (BESS), near to Swardeston and is expected to work on site or at the site office daily. The role involves HSE support to the Converter station construction, HSE support to the construction of the Battery Storage facility (BESS) and HSE support to the Norwich Main / National Grid interface. The construction projects are at the same base location. Main scope of works currently being undertaken are the Mechanical and Electrical commissioning phase of the projects. Travel expenses are not chargeable to the base location. However, flexibility is required for occasional off project site visits for company and supplier internal/external meetings, which may also be overseas. • The shift pattern is a 5-day a week rotation (Mondays - Friday), 10-hour days. • There may be some flexibility for occasional working from home if authorised by project management. • Applicants must be local to the project and are expected to live within 60 minutes travel time of the site. Base location for the role: HOW03, Hitachi Construction Site, Main Road, B1113, Swardeston, NR14 8DU IT • Required IT equipment (laptop etc.) is supplied by the client. Requirements: Requirements and Qualifications: • English language skills required. • Relevant academic or technical background • Minimum 3 years’ work experience with HSE, ideally from onshore construction in a Client role. • Excellent interpersonal skills, strong communication and presentation skills • IT literate (Microsoft office package, knowledge of Synergi is an advantage) • Knowledge of route cause analysis and incident investigation • Demonstrable experience in dealing with 3rd party contractors in relation to HSE. • Completed NEBOSH; (minimum level 3), or similar recognized HSE qualification. • In date site safety passport (CCNSG or CSCS) • Current clean UK driver’s license Desirable qualifications/experience: • QHSE BSC, Diploma or equivalent level 6 qualification • NEBOSH or IEMA Environmental Management qualifications • Qualified/certified Auditor • Experienced in delivery of training courses / material. • Prior client experience is beneficial. The consultant must comply with and provided client training and medical requirements.

Onshore Senior HSE Advisor

Document Controller   Duration: 01/01/2026 – 31/12/2026 Location: Essen, Germany Rotation: Monday – Friday, 8 hours per day Type: Freelance   Description:   Function / Role Operational responsibility for the formal, procedural, and system-based management of all project-related documents within the Document Management System (DMS). Ensure that all technical and administrative documents are complete, version-controlled, reviewed, and archived according to project requirements. This role generally supports the Document Manager. The work location is the Autarkie construction site in Biblis. Position Objective Ensure an organized and traceable document flow between all project stakeholders (engineering, suppliers, client). Support project execution through correct and legally compliant document control. Guarantee data quality and revision security within the DMS. Main Tasks Document Management: Maintain, store, and version all project documents in the DMS (e.g., technical drawings, specifications, test reports, manuals). Document Review (Formal Check): Verify incoming and outgoing documents for completeness, correct metadata, numbering, file formats, revision, and approval status. Version and Revision Control: Ensure that only the latest approved version is in circulation; label and archive older revisions. Review and Approval Processes: Initiate and track review workflows, support reviewers and approvers, and document approval history (audit trail). Document Distribution: Prepare and send document transmittals to internal/external recipients; maintain distribution lists and dispatch records. Supplier Documentation: Receive, check, and manage document deliveries from suppliers; provide feedback on discrepancies; maintain the Document Status Report (DSR). DMS Maintenance: Upload documents, maintain metadata, update statuses and approvals, and assist users with system usage. Paper Archive: Create a general paper archive reflecting the digital state, which can be handed over to the client as part of the final documentation. Archiving & Handover: Compile and quality-check the final documentation (As-Built) for transfer to operations or DMS EASY.

Document Controller

Department Description and Responsibilities The Functional Materials platform is dedicated to developing and optimising materials for catalytic and electrochemical applications. Safety, quality, and environmental compliance are embedded in our operations and culture. Project Description The contractor will support the Restart Project within the Functional Materials platform, ensuring e compliance during the relocation and integration of chemical products into the database and warehouse system. The role includes administrative and field activities, as well as acting as the primary QHSE contact for the project. Primary Tasks and Responsibilities • Act as QHSE expert in project activities, ensuring risk-aware operations. • Promote and implement the STOP reflex and Golden Rules across the site. • Conduct process risk analyses and verify safety-critical components. • Organise and facilitate workshops on risk awareness and safety measures. • Monitor and report QHSE-related KPIs. • Manage chemical product registration in the database and assign correct storage locations. • Provide coaching and guidance on QHSE compliance to staff and supervisors. • Support the hierarchical line in drafting risk analyses, instructions, and emergency procedures. Technical Profile Requirements • Bachelor or Master’s degree in a technical field or equivalent experience. • Certified Prevention Advisor Level 2 (mandatory). • Experience in process industry (nice to have). • Strong understanding of safety-critical components and process risk analysis. Non-Technical Profile Requirements • Senior profile with ability to quickly adapt and take ownership. • Strong communication skills and hands-on mentality. • Analytical, proactive, and pragmatic approach. • Experience in training and coaching teams. • High sense of responsibility and autonomy. Methodology/Certification Requirements • Prevention Advisor Level 2 certification. • Familiarity with QHSE standards and best practices. Language Proficiencies • Dutch and English (spoken and written). Location • 100% onsite presence at Olen • Occasional home office possible. Contract • Start ASAP • Full Tim role for 9 months, extension possible Required Skills Environment Coordinator A - Yes Prevention Advisor Level 1 - Yes Safety Coordinator A - Yes

EHS Specialist

Electrical Authorised Person Location – Copenhagen Also other European locations Key Responsibilities Safety <ul><li>Enforce company procedures including Control of Hazardous Energies, Permit to Work, and Lock-Out Tag-Out (LOTO) systems.</li><li>Ensure compliance with the Electrical Safe System of Work (ESSOW) and client safety directives.</li><li>Review and approve subcontractor electrical RAMS and COHE documentation.</li><li>Manage and control LOTO systems, safe switching, energisations, and isolations during commissioning.</li><li>Conduct regular safety audits, inspections, and incident reporting.</li><li>Ensure correct use, selection, and maintenance of electrical PPE and arc flash mitigation procedures.</li></ul>Technical <ul><li>Perform commissioning, testing, troubleshooting, and inspection of LV/MV electrical systems, including MCCs, VSDs, switchgear, and distribution panels.</li><li>Read and interpret technical drawings, SLDs, and wiring diagrams.</li><li>Complete and record all pre- and post-energisation testing in compliance with local regulations.</li><li>Support all commissioning phases (Levels 1–5) and enforce the Electrical Permit to Work system.</li><li>Assist in electrical incident investigations and ensure safety and calibration of testing equipment.</li><li>Execute safe switching schedules and energisation procedures under SAP direction.</li></ul>

Surveyor Start Date: 01/01/2026 End Date: 15/03/2026 Location: Onshore – Wladyslawowo, then move onto offshore vessel Description: Client information is a world leader in the highly specialised fields of dredging, solutions for the offshore energy market, infra marine and environmental works. With more than 140 years of experience and 5,200 highly skilled professionals, we bring tailor-made solutions, innovation and new technologies to our customers’ projects, ensuring that they are performed safely, efficiently and cost-effectively. Primary Tasks and responsibilities -Project execution: Surveyor responsible of vessel positioning services on board multicat during mass flow excavation works and rock bag installation. Main survey sensor used: Echoscope. -Reporting of sailed MFE lines and rock bag positions. Visualize MFE tool and individual rock bags in Echoscope USE software. -Qinsy online navigation software. -For PLGR work: calculating manual layback of the pre lay grapnel train in Qinsy and logging load cell data reporting. Technical profile requirements - 7 years’ experience as a surveyor in marine or construction environments. -You have a practical knowledge of modern measurement techniques and are familiar with AutoCAD. Non-Technical profile requirements -Ability to work effectively in a team and communicate clearly with colleagues and stakeholders. Methodology/Certification requirements -Bachelor’s or Master's degree in Hydrography, Surveying, Geomatics, or a related field. Bachelor Construction with specialization in topography Certifications required -Full GWO -Medical -Schengen VISA or EU -Member Language proficiencies -Fluent proficiency in English is required (written and spoken). -Proficiency in other languages is a plus.

Surveyor

Project Manager The Power Transmission Project Operations section is responsible for execution of the turnkey and offshore projects within the business group The Project Manager role is the operational head of a defined project or package, organized in the Projects section and acting as responsible for one or more projects First level of escalation from the project manager is the Project Director or to an appointed management representative, for supervision. The formal head above the PM is the leader of the steering committee. The project charter for the projects are listing the responsibilities <ul><li>The matrix organization of the project management requires good communication and information at the interface between vertical and horizontal axis</li><li>The team is spread between several locations – and may support execution activities ongoing in different plants and sites</li><li>The Job Description, or parts of it, may be used for temporary roles in specific projects</li><li>A project manager is expected to be capable of heading our standard EPC and EPCI projects</li></ul> Purpose <ul><li>Manage the assigned project(s) and ensure project(s) are delivered on time, on budget, with the required quality and within agreed specifications and in compliance with agreed HSE standards</li><li>Provide input to allocated tenders – or contribute in other defined management tasks requiring project approach</li></ul> Mission specific <ul><li>Responsibility for scoping, tendering and managing multiple marine subcontracts, such as diving, route preparation, flexible/ cable product installation, trenching and rockdumping. Experience of managing manufacturing contracts such as umbilical's, flexible or rigid flowlines would be an advantage.</li></ul> General – PM role: <ul><li>Overall management of the assigned project(s), including – but not limited to – the following:</li><li>Ensure that project(s) are executed in line with the mandate given - according to Contract requirements and Clients as well as internal expectations (QHSER, sales, cost, margin, cash, time, phasing)</li><li>Effective use of the Project Model and internal procedures, including profitability requirements</li><li>Manage a geographically spread project team organization</li><li>Ensure adequate use of tools, processes and procedures for project execution</li><li>Ensure effective use of the resources within the team and in cooperation with the departments, disciplines and internal units to meet internal and external requirements/obligations</li></ul>Accountable for the profit and loss performance within the assigned project scope.Tender Process Assistance: <ul><li>Provide input upon request to allocated tenders for aspects relating to Project Management</li><li>Take a temporary role in the tender team if required</li><li>Take active part in the DICs / IDCs / risk assessments</li></ul>Project Execution: <ul><li>Obtain an as optimal project execution as possible in accordance with the Project Model, including identifying and managing risks and opportunities</li><li>Organize and lead the project in order to achieve the best possible co-operation between the involved units and team members</li><li>Ensure effective use of the resources to meet internal and external requirements – also taking people management in priorities</li><li>Be overall responsible for intercompany agreements and dedicated sub-contracts</li><li>Report to Client according to Contract requirements</li></ul>

We are seeking an experienced Lead Engineer – Drive System Specialist to take ownership of engineering activities across complex projects.  Key Responsibilities<ul><li>Lead and manage engineering activities across projects, ensuring compliance with client expectations, legal requirements, and industry standards.</li><li>Take full ownership of the Functional Safety lifecycle within projects.</li><li>Supervise, guide, and motivate teams of engineers, including external contractors, ensuring high-quality deliverables.</li><li>Mentor apprentices, trainees, junior, and graduate engineers to foster professional development.</li><li>Collaborate closely with Project Managers to deliver projects on time and within budget, proactively identifying and mitigating technical risks.</li><li>Participate in the Engineering Management Working Group, contributing to the development of internal standards and continuous improvement initiatives.</li><li>Develop electrical and controls concept designs, including Functional Design Specifications, Safety Requirements Specifications, Single Line Diagrams, Network Topologies, Device Layouts, Cause & Effect Matrices, and Safety Block Diagrams.</li><li>Produce software design specifications and develop software/configuration deliverables for PLCs, HMI, SCADA, robots, drives, BMS, and related systems.</li><li>Lead Factory Acceptance Testing (FAT), Commissioning, and Site Acceptance Testing (SAT).</li><li>Maintain and own the Technical Construction File.</li><li>Undertake other duties as required to support project and business objectives.</li></ul>

Lead Controls Engineer

The Power Transmission Project Operations section is responsible for execution of the turnkey and offshore projects within the business group The Project Manager role is the operational head of a defined project or package, organized in the Projects section and acting as responsible for one or more projects First level of escalation from the project manager is the Project Director or to an appointed management representative, for supervision. The formal head above the PM is the leader of the steering committee. The project charter for the projects are listing the responsibilities <ul><li>The matrix organization of the project management requires good communication and information at the interface between vertical and horizontal axis</li><li>The team is spread between several locations – and may support execution activities ongoing in different plants and sites</li><li>The Job Description, or parts of it, may be used for temporary roles in specific projects</li><li>A project manager is expected to be capable of heading our standard EPC and EPCI projects</li></ul> Purpose <ul><li>Manage the assigned project(s) and ensure project(s) are delivered on time, on budget, with the required quality and within agreed specifications and in compliance with agreed HSE standards</li><li>Provide input to allocated tenders – or contribute in other defined management tasks requiring project approach</li></ul> Mission spesific <ul><li>Responsibility for scoping, tendering and managing multiple marine subcontracts, such as diving, route preparation, flexible/ cable product installation, trenching and rockdumping. Experience of managing manufacturing contracts such as umbilicals, flexible or rigid flowlines would be an advantage. </li></ul> General – PM role: <ul><li>Overall management of the assigned project(s), including – but not limited to – the following:</li><li>Ensure that project(s) are executed in line with the mandate given - according to Contract requirements and Clients as well as internal expectations (QHSER, sales, cost, margin, cash, time, phasing)</li><li>Effective use of the Project Model and internal procedures, including profitability requirements</li><li>Manage a geographically spread project team organization</li><li>Ensure adequate use of tools, processes and procedures for project execution</li><li>Ensure effective use of the resources within the team and in cooperation with the departments, disciplines and internal units to meet internal and external requirements/obligations</li></ul>Accountable for the profit and loss performance within the assigned project scope.Tender Process Assistance: <ul><li>Provide input upon request to allocated tenders for aspects relating to Project Management</li><li>Take a temporary role in the tender team if required</li><li>Take active part in the DICs / IDCs / risk assessments</li></ul>Project Execution: <ul><li>Obtain an as optimal project execution as possible in accordance with the Project Model, including identifying and managing risks and opportunities</li><li>Organize and lead the project in order to achieve the best possible co-operation between the involved units and team members</li><li>Ensure effective use of the resources to meet internal and external requirements – also taking people management in priorities</li><li>Be overall responsible for intercompany agreements and dedicated sub-contracts</li><li>Report to Client according to Contract requirements</li></ul> For more info, do not hesitate to get in touch!

Project Manager - Power Transmission

Site Commissioning Manager Location: BVB Stadium in Dortmund Duration: 01/12/2025 to 31/05/2026 Type: Freelance contract Rotation: 20 hours a week – part time Project: Arena Description: Battery project at the Dortmund Arena Stadium: Commissioning Manager: Efficient and comprehensive management of the cold and hot commissioning process in collaboration with the respective service and component providers (BESS container, PE inverter, Siemens MV transformation, overall electrical installation, integration of PV-plant interface etc. this in conjunction with a (non scope) Solar project Due to the uniqueness (stadium environment) and complexity of the project in terms of interfaces knowledge of E and commissioning is required The BESS container has already arrived, the electrical installation is ongoing, the PE inverter is expected to be delivered in CW3/2026 and the MV transformation shall arrive in March 2026. The cold and hot commission needs to be executed accordingly for a project closure in 05/2026 (as per current project timeline). Experience of site and commissioning management is required with an electrical /C&I background. Flexibility and stakeholder management is a plus. Foreseen is a start in December 2025 with limited participation as of January 2026 1/2 FTE workload is needed. This until May 2025.

Site Commissioning Manager

Document Controller 01/2026 – 08/2026 Baltica 02 Offshore Windfarm Varso 2, Level 13-15, 73 Chmielna Street, Warzawa, Poland The assignment is to work mainly on an WTG Offshore Foundation package. We are receiving a high volume of contractor documentation and we must deliver speedy and high-quality support to ensure that the technical documentation flow is running smoothly. When time permits, you may also be required to assist with Information Management Work on other packages such as OSS, Offshore HV-Cables etc. An Information Management Specialist with a background in information management or document controlling, with experience in work in Aconex and DORECO is preferred. The work will be related to the polish Baltica Offshore Wind Farm 02-project and polish language while not being a requirement can be an advantage. The ideal candidate has extensive experience as an Information Management Specialist or Document Controller. · Information Management Specialist/Document Controller experience · Experience with Aconex and DORECO · Remote work allowed · Experience with Construction Project Work · Remote work allowed · Polish speaking is an advantage

The assignment is to work mainly on an WTG Offshore Foundation package with my windfarm developer client. We are receiving a high volume of contractor documentation and we must deliver speedy and high-quality support to ensure that the technical documentation flow is running smoothly.   When time permits, you may also be required to assist with Information Management Work on other packages such as OSS, Offshore HV-Cables etc.   An Information Management Specialist with a background in information management or document controlling, with experience in work in Aconex and DORECO is preferred.   The ideal candidate has extensive experience as an Information Management Specialist or Document Controller.   <ul><li>Information Management Specialist/Document Controller experience</li><li>Experience with Aconex and DORECO</li><li>Remote work allowed</li><li>Experience with Construction Project Work</li><li>Remote work allowed</li><li>Polish speaking is an advantage</li></ul> For more information, do not hestiate to get in touch!

Information Management Specialist

Site Quality Manager Job Description Description Ensures support to the project management team regarding all quality related issues on projects to support its objective achievement in terms of quality, supplier & subcontractor quality, and customer satisfaction. Leads the implementation, maturity assessment and improvement of all processes along the entire value chain to improve customer satisfaction and increase profitability in a safe working environment across the project. Key Areas of Responsibility<ul><li>Cooperating with the customer on Project Quality issues and ensuring ownership of actions to resolve it. Enabling and coaching all project team members to evaluate risks, problems and solutions from a quality and customer/stakeholder point of view.</li><li>Analyzing transferability of experience between projects as well as planning Quality Assurance activities to reduce all forms of risk. Collaborating with the project team to develop schedules, estimates, forecasts, and budgets for quality activities.</li><li>Applying project quality procedures and plans and ensuring appropriate implementation and compliance from the project team.</li><li>Certifying effective internal controls system (project, supply, site) is in place to verify that processes continue to meet customer and stakeholder requirements, validating that control plans are applied and effective in mitigating prioritized risks.</li><li>Performing audits on project delivery and ensuring the use of Quality data analytics from all aspects of the operation to identify risks, failures and nonconformances within the local business, its suppliers and customers. Ensuring that appropriate corrective and preventive actions are taken, and solutions are managed to closure.</li></ul>Additional Hiring Information<ul><li>A Site Quality Manager is being sought for the Bergrheinfeld construction site (full-time on site).</li><li>Spotlight call: Monday 01.12., 11:30 AM.</li></ul>Requirements<ul><li>Technical / engineering / quality management education – minimum bachelor’s degree.</li><li>5 year construction quality site experience or in operations.</li><li>Power or energy industry experience.</li><li>Track record and proven capability in Change Management, managing internal project/program in large and complex organization.</li><li>Experience in process management ideally in project business, preferably in the energy or automation industry, or other quality and process-oriented industries.</li><li>Continuous Improvement experience.</li><li>L6S Belt.</li><li>Capacity to communicate, result oriented, speed in execution, openness and listen to others.</li><li>Test coordination experience.</li><li>ISO9001 knowledge.</li><li>Certified auditor.</li><li>Knowledge and experience on construction codes / standards.</li><li>English & German fluency (written spoken)</li><li>Willing to be relocated at project site location.</li><li>Computer skills and knowledge of completion systems.</li></ul>Responsibilities<ul><li>Provide Quality Induction training to the site personnel.</li><li>Execute and follow up the Quality Plans, master test plan and completion system status for site activities as required.</li><li>Review quality documentation for correctness and completeness prior to approval (e.g. test certificates, checklists, etc.).</li><li>Ensure that the quality control plans (ITP, ITR etc.) and any erection documentation (drawings, procedures, etc.) provided by HVDC are effectively communicated to the site management team and the contractors.</li><li>Ensure that Quality Control processes are fully implemented and continuously monitored.</li><li>Ensure that inspection/testing during Civil, Mechanical & Electrical erection and Commissioning are conducted, documented, checked and validated as per the quality control system.</li><li>If required, support the organization and supervision of acceptance testing and/or approval by customers, third parties and governmental authorities whenever required at site.</li><li>Ensure that the completion system, deviation, NCR (Non-Conformance Report) system, CCRP system and any other Quality tools are fully deployed at site and that the users are adequately trained with the support of the completion manager.</li><li>Ensure that all testing and measurement equipment used at site are listed and calibrated and that the associated calibration certificates are available.</li><li>Follow up completion system at site having an overview of status regarding inspections, certifications and all outstanding works including punch list.</li><li>Provide Quality-related site KPIs to the stakeholders whenever required.</li><li>Follow up on site inspections and support the management of punch-out items.</li><li>Provide Quality inputs to the site management to support on-time and in-budget execution of the project.</li><li>If required, support the performance of incoming inspection of goods at site and report any deviations according to the project regulations.</li><li>Follow up that handling and storage of delivered material and equipment are in accordance with the manufacturer’s guidelines.</li><li>Ensure that the ITP/ITR are applied by the sub-contractor and its subcontractors, including compliance with the Hold points and Witness points.</li><li>Ensure site quality documentation is generated, distributed, updated and archived in accordance with the management system and completion system requirements.</li><li>Support the deployment of the Site Quality audit program (including contractor audits and internal audits).</li><li>Participate in internal and contractor quality audits as per the Site Quality audit program.</li><li>Assist and coordinate any planned external site-related audits.</li><li>Monitor contractor compliance with Quality requirements and follow up contractor corrective actions whenever required.</li><li>Follow up the adherence and governance of the quality management system at site.</li><li>Support CoQP reporting processes at site according to HVDC processes.</li></ul>

Site Quality Manager

Key Responsibilities: <ul><li>Monitor and coordinate commissioning and operational activities across the project.</li><li>Ensure commissioning activities comply with HSE, quality, planning, and cost requirements.</li><li>Promote zero-harm HSE policy through active involvement in daily operations.</li><li>Maintain effective communication and coordination between all stakeholders.</li><li>Validate that equipment and systems meet functional and operational requirements.</li><li>Report commissioning progress and participate in related meetings.</li><li>Review and ensure quality of commissioning documentation.</li><li>Communicate with grid operator, contractors, and internal teams.</li><li>Optimize wind farm production for maximum power output.</li><li>Manage and operate the control room effectively.</li><li>Monitor HV/MV electrical operations to ensure safety.</li><li>Implement best practices for commissioning scope and collaborate with O&M teams.</li><li>Capture and transfer commissioning experience into asset operations.</li></ul>Electrical Safety & Control Duties: <ul><li>Act as Electrical Safety Control Engineer (ESCE) and Senior Authorized Person (SAP) for switching decisions.</li><li>Prepare, review, and comment on PTW and RAMS.</li><li>Authorize and monitor all remote HV/MV switching operations.</li><li>Prepare cross-package switching protocols and schedules.</li><li>Coordinate emergency response and communicate outages to stakeholders.</li><li>Operate electrical equipment via SCADA systems, including signal testing.</li><li>Manage HV systems (225kV) and MV systems (33kV) operations.</li><li>Handle SCADA alarms and implement corrective measures.</li><li>Maintain operational logs and manage shift handovers.</li></ul>Required Skills & Experience: <ul><li>Minimum 3 years in a similar role, preferably in offshore wind farm commissioning or operations.</li><li>Strong experience as Control Engineer and/or Senior Authorized Person up to 225kV.</li><li>Expertise in switching operations and electrical systems.</li><li>Excellent understanding of electrical networks and control & protection systems.</li><li>Proficiency in English and/or French.</li><li>Advanced MS Office skills.</li><li>Adaptable and able to work in an international team environment</li></ul>

Electrical Safety Control Engineer

Daniel joins our Renewable Energy team as a Delivery Consultant.

Daniel Bentley

Delivery Consultant

Site Manager (Bauleiter – Building Leader) Duration: 01/04/2026 – 28/02/2027 Type: Freelance Description: The site manager or client representative is a functional role in a project for which the following skills are desirable: - Electrical engineering training/degree with practical experience in the construction of energy industry facilities - Experience in the supervision, leadership, and management of large construction sites. - Experience in monitoring occupational safety. - Experience in commissioning electrical engineering systems ? 10 kV desirable - Good verbal and written communication skills with the general contractor, suppliers, the client site on location, and headquarters in Essen. Job description: The site manager/client representative is a functional role in a project, which essentially involves the following activities (list is not exhaustive). - Client representative on the construction site vis-à-vis the general contractor, the neighbouring client Nuclear site and, if applicable, authorities. - Management of and contact person for the general contractor and client's own suppliers - Coordination, management, instruction, supervision, and support of client's component suppliers at and on the construction site. - Interface coordination with the neighbouring power plant and engineering colleagues in Essen and Dresden - Responsibility for the construction and commissioning of the construction site in the role of client - Responsibility for health, safety, and the environment on the construction site in the role and on behalf of the client - Monitoring the work of component suppliers and general contractors - Coordinating and monitoring the commissioning of components provided by the client (battery containers, converters, MV and HV transformers) by the relevant suppliers together with the general contractor. - The construction site itself is handed over to a contracted general contractor who is responsible for the construction site, safety, compliance with permits, and construction site management. The client representative acts as the second line of contact for the client on site but does not bear any direct responsibility in the sense of a site manager vis-à-vis authorities or official bodies. NOTE: proficiency in German language is MANDATORY

Site Manager

APPLY FOR THIS JOB

Daniel Bentley