Client Representative – HDD Cable Projects Department: Project Delivery / Construction Oversight Reports To: Project Manager / Construction Manager Location: On-site (Field-based, Fully Onshore) Employment Type: Full-time / Contract Rotation: 4 on 4 off (2 representatives per rotation for 24-hour coverage) Project Timeline Project 1: April start (4 representatives required) Project 2: June start (4 representatives required) Duration: 4 – 6 months About the Role The Client Representative serves as the on-site delegated authority for the client, ensuring Horizontal Directional Drilling (HDD) cable installation activities are executed safely, to specification, on schedule, and in full compliance with contractual, environmental, and regulatory requirements. This is an oversight and assurance role focused on coordination, verification, and quality leadership—not hands-on operation. Key Responsibilities Technical Oversight & Quality Assurance <ul><li>Monitor HDD operations including pilot hole drilling, steering, reaming, and pullback activities</li><li>Validate bore path design, allowable bend radii, and geotechnical suitability</li><li>Review and approve method statements, execution plans, and risk assessments</li><li>Oversee cable pull calculations, tensile limits, and sidewall pressure compliance</li><li>Ensure proper duct installation, conduit integrity checks, swabbing, mandrel testing, and proofing</li><li>Interface between HDD works and electrical cable installation teams</li></ul>HSE Leadership & Compliance <ul><li>Enforce client HSE expectations and foster a strong site safety culture</li><li>Manage permit-to-work systems, site inductions, toolbox talks, and Safe Job Analysis (SJA)</li><li>Identify hazards specific to HDD: high pull operations, drilling fluid management, pipe handling, confined space, and pressure systems</li><li>Oversee environmental controls: drilling fluid containment, spill response, waste management, and watercourse protection</li><li>Manage Inadvertent Fluid Release (IFR/frac-out) incidents and mitigation strategies</li><li>Ensure compliance with land access permits, environmental regulations, and utility guidelines</li></ul>Project & Contract Management <ul><li>Monitor contractor performance against method statements, risk assessments, and daily progress plans</li><li>Track critical path activities and schedule adherence</li><li>Identify deviations from specification and authority to escalate or stop work when required</li><li>Produce daily reports on meterage drilled, drilling parameters, issues, risks, incidents, and equipment downtime</li></ul>Stakeholder Management <ul><li>Serve as primary on-site liaison between client, contractor, landowners, environmental regulators, and cable installation teams</li><li>Translate complex technical issues for non-technical audiences</li><li>Resolve conflicts between contractor crews and client expectations professionally and effectively</li></ul> Required Competencies HDD Technical Knowledge: Pilot hole drilling, steering, reaming, pullback; drilling fluids and recycling systems; bore tracking systems (Walkover, Gyro, Wireline); HDD failure modes (lost circulation, frac-outs, stuck pipe, over-pull) Geotechnical Understanding: Interpret geotechnical reports, soil logs, ground conditions, rock strength; survey data and as-built requirements Quality Assurance: Pre/post-reaming logs, drilling fluid logs, pullback records, alignment reports; standards compliance (UKSTT, EN 16228, DCA, API RP 13, ASTM F1962, NASTT) Safety & Environment: HSE certification, hazard recognition, spill response, IFR management Project Management: Contractor oversight, progress monitoring, schedule awareness, technical documentation review Qualifications & Experience Education <ul><li>Degree or diploma in Engineering, Construction, Telecommunications, or related technical field</li></ul>Certifications (Required/Preferred) <ul><li>IOSH Managing Safely or NEBOSH General Certificate (or equivalent HSE certification)</li><li>NASTT HDD Good Practices or industry-recognized HDD training</li><li>Confined Space certification (site-dependent)</li><li>Lifting Operations certification (site-dependent)</li><li>First Aid certification (site-dependent)</li></ul>Experience <ul><li>3–5 years in HDD operations, trenchless construction oversight, or cable installation projects</li><li>Minimum 1–2 successful HDD cable projects completed in a supervisory or client representative role</li></ul> Personal Attributes Integrity: Objective representation of client interests with unwavering ethical standards Assertiveness: Ability to enforce requirements professionally without unnecessary escalation Attention to Detail: Rigorous review of critical parameters and documentation Decision Making: Sound judgment with clear technical justification Adaptability: Resilience in challenging field conditions Proactivity: Forward-thinking risk identification and mitigation Working Conditions <ul><li>Physical Requirements: Ability to conduct site walks, work in varying weather conditions, and wear required PPE</li><li>Schedule: 4 on 4 off rotation with 24-hour coverage provided by 2 representatives per rotation; project-driven schedule that may include extended hours or shift work to meet construction timelines</li></ul>

Client Representative - Cable/Drilling

Lead Project Manager Start date: April End date: 1st October Position: As a Project Lead, you will be responsible to lead Special Projects designated within the Service Operations area. Special Projects and TM are considered Blade Inspections/Repairs Campaigns, Retrofits Campaigns, or even Large Components Repairs campaigns. Responsibilities: <ul><li>Assists in the project execution of special projects within the Services department</li><li>Maintain Project Schedule(s).</li><li>Schedules necessary Inspection campaigns and process the findings.</li><li>Assists in the coordination of blade/large components repair campaigns based on findings.</li><li>Complies with a defined schedule.</li><li>Performs quality control audits.</li><li>Assists in the management of project costs including monitoring and validating contractor timesheets.</li><li>Assists in the coordination and supervision of manpower and resources on-site for project activities.</li><li>Communicates project status to Management to facilitate customer communications.</li><li>Generates and present periodic reports to the Management team.</li><li>Coordinates and implements technical solutions (retrofits) in cooperation with the Engineering and Technical Services departments.</li><li>Follows standard client Project Management processes.</li><li>Performs pertinent operational and departmental tasks as required</li><li>Performs other duties as assigned by Supervisor</li></ul> Requirements: <ol><li>Competencies/Qualifications (Knowledge, Skills, and Abilities):</li></ol><ul><li>Proven relevant experience managing, leading, and/or coordinating several activities/projects at once (preferably within the Wind Industry or similar industry)</li><li>Ability to plan, organize and execute projects, meet deadlines, prepare reports</li><li>Experience with the coordination of resources including subcontractors (Internationally and domestically)</li><li>Excellent written and verbal communication skills</li><li>Excellent organizational skills including attention to detail and multitasking</li><li>Strong interpersonal skills, and professionalism</li></ul> Education: <ul><li>High School diploma or equivalent required.</li><li>Bachelor’s Degree in technical or engineering field preferred but will consider relevant work experience instead of a degree</li><li>PMP certification desirable</li></ul> Experience: <ul><li>Minimum of 2-3 years in project management, project lead, or other management capacities, especially within the renewable energy or construction industry preferred</li></ul> Other Condition: <ul><li>Travel to project sites as required (>75% travel)</li><li>Driving is an essential function of the job. Must possess a full valid driver’s license and be insurable under our auto insurance policy. This position will be subject to periodic driver’s abstract checks to confirm continued insurability.</li><li>Must be able to pass a pre-employment physical administered by a medical examiner to ensure the ability to safely perform job functions and meet the physical demands of the position</li><li>Ability to meet specific OSHA and ANSI weight limits of 265 lbs. or less.</li><li>Flexible to work long hours and adapt to changing schedules as needed for project demands.</li><li>Ability to travel domestically and internationally up to 100%, including extended stays and variable work schedules to meet business needs.</li><li>Must be legally authorized to work in the U.S. without current or future employer sponsorship</li><li>Ability to obtain a U.S. Passport and Canadian work authorization required</li></ul> .

Lead Project Manager

Authorised Person (AP) – Mission Critical Data Center | Spain We are looking for a qualified Authorised Person (AP) to join a major Mission Critical Data Center project in Spain. This is a permanent role. Experience Required<ul><li>Strong knowledge of electrical safety for LV & MV systems.</li><li>Familiar with Permit to Work, Lock-Out Tag-Out (LOTO), and safe system of work procedures.</li><li>Experience reviewing and approving subcontractor electrical documentation and risk assessments.</li><li>Competent in hazard identification, risk mitigation, and enforcing safety protocols.</li><li>Knowledge of arc flash safety, PPE selection, and maintenance.</li><li>Experience assisting with internal audits and compliance checks.</li><li>Color vision test certification (if not already provided).</li><li>Ability to follow client directives and lead safe working practices.</li></ul>Key Responsibilities<ul><li>Ensure compliance with safety procedures and regulations.</li><li>Review and approve subcontractor electrical RAMS and COHE documentation.</li><li>Authorise energisation and isolation requests for LV & MV systems.</li><li>Monitor hazardous areas, enforce PPE use, and maintain safety signage.</li><li>Report electrical incidents and support internal audits.</li><li>Identify hazards and implement mitigation measures.</li></ul>

Authorised Person

We are seeking a senior S&C Engineer Representative – SCADA Commissioning to support EPC Electrical Systems within SCADA. The purpose of the assignment is to provide independent supervision and coordination of SCADA commissioning activities, including FAT, SAT, SIT, and on-site execution, ensuring full compliance with client's standards, project specifications, National Grid requirements, and applicable HSE rules and local legislation. The consultant will assume day-to-day responsibility for managing and coordinating SCADA commissioning activities on site. This includes supervising contractors, ensuring quality and documentation of tests, signing off contractor checklists, and driving closure of snag lists. The consultant will be expected to draft and maintain the SCADA Commissioning Plan, defining scope, QA/QC requirements, and timelines, and to provide structured progress reporting to the SCADA Package Manager and Commissioning Manager. The role requires close coordination with SCADA contractors, Electrical Commissioning Managers, and other relevant stakeholders to ensure alignment with the overall project commissioning plan. The scope covers commissioning of communication networks, radio systems, telephone systems, Substation Control Systems (SCS), WTG SCADA and grid compliance, metering systems, and, where applicable, VTMS systems. The consultant must ensure that commissioning activities are executed in accordance with internal and external requirements, including project HSE rules and National Grid compliance obligations. Requirements: <ul><li>The consultant must demonstrate familiarity with Ørsted’s commissioning governance, reporting structures, documentation standards, and EPC delivery model.</li><li>The consultant must have substantial hands-on experience with SCADA commissioning in large-scale infrastructure or energy projects, including direct experience with Hitachi MicroSCADA and Substation Control Systems. In-depth knowledge of National Grid requirements and grid compliance processes is essential, including practical experience ensuring that SCADA systems meet grid code obligations during commissioning. The consultant must be capable of managing these interfaces independently without requiring escalation for fundamental compliance matters.</li><li>A minimum of five years of relevant experience is required, supported by a technical background at B.Sc. level or equivalent. Experience aligned with IPMA B/C, PMP, or equivalent project management frameworks is considered advantageous. Strong stakeholder management, structured documentation practices, and the ability to operate effectively in high-pressure commissioning environments are expected.</li></ul> For more info, do not hesitate to get in touch!

SCADA Engineer

MARINE COORDINATOR Offshore Wind Farm Operations & Maintenance Contract Start: June 15, 2026 Contract End: September 4, 2026 Duration: Approximately 12 weeks Work Location: O&M Base Fécamp, France Working Language: French (Required) Rotation Pattern: No rotation - Continuous presence required WORK SCHEDULE Subject to change depending on operational progress: <ul><li>Morning Shift: 07:00 – 14:00</li><li>Afternoon Shift: 13:00 – 20:00</li><li>Weekend Shift: 12 hours/day (as scheduled)</li><li>Weekend Work: 1 out of 3 weekends</li></ul> POSITION OVERVIEW The Marine Coordinator ensures the safety of offshore activities, controls and secures access to the offshore site and associated ports (primarily the maintenance base) by ship. The role involves active participation in activity planning and operational optimization while maintaining 24/7 maritime coordination coverage. KEY RESPONSIBILITIES 1. Leadership & Coordination <ul><li>Lead daily coordination meetings (internal and external)</li><li>Ensure activity reporting to Production Manager and Site Manager</li><li>Coordinate internal and external feedback sessions</li><li>Ensure implementation of actions to optimize offshore and port operations</li></ul>2. Risk Assessment & HSE Compliance <ul><li>Participate in risk assessment and analysis of offshore and port activities</li><li>Propose safety recommendations</li><li>Ensure HSE rules are respected in conjunction with Site Manager and HSE Manager</li><li>Verify staff authorizations and communicate safety instructions to all parties</li></ul>3. Operational Planning <ul><li>Participate in operations planning with production and site managers</li><li>Contribute to short and medium-term schedule development</li><li>Manage daily coordination meetings and issue access permissions while managing priorities</li><li>Establish and maintain contact with maritime authorities (Port, CROSS)</li></ul>4. Activity Tracking & Surveillance <ul><li>Monitor personnel movements (working at sea and wind farm entry)</li><li>Track transport means and on-site receptions</li><li>Coordinate visitor access for exceptional exemptions</li><li>Ensure continuous site surveillance and monitoring of all vessels, barges, floating structures, and aircraft passing through or near the site</li><li>Coordinate vessel positioning to minimize downtime, avoid conflicts of interest, and maximize safety</li><li>Make appropriate arrangements for third-party vessels</li></ul>5. Maritime Operations <ul><li>Track equipment to and from offshore site</li><li>Ensure safe handover at end of watch for 24/7 continuity</li><li>Supervise safe and timely embarkation/disembarkation of CTVs (Crew Transfer Vessels)</li><li>Oversee safe loading and unloading of equipment</li><li>Track hazardous products used in park operations</li><li>Inform vessels about exclusion zones, access restrictions, diving operations, and heavy maintenance operations</li></ul>6. Weather Monitoring & Safety <ul><li>Monitor on-site weather evolution</li><li>Immediately inform ships of weather deterioration</li><li>Coordinate team repatriation when necessary for safety</li><li>Share safety alerts and safety-relevant information (particularly to fishermen and boaters)</li><li>Maintain good relationships with other sea users</li></ul>7. Asset Protection & Monitoring <ul><li>Signal and record position of subsea equipment or abandoned/overboard equipment</li><li>Monitor asset functioning and trigger interventions via Operational Center (OCC) to restore production</li><li>In case of intrusion on assets, ensure doubt removal via video surveillance and notify authorities</li></ul>8. Crisis & Incident Management <ul><li>Ensure monitoring and reporting of emergency exercises</li><li>Ensure Emergency Response Plan implementation</li><li>Collect, centralize, and disseminate information during potential or actual crises (handrail)</li><li>Assist HSE Manager in incident analysis (near misses, first aid situations, or situations of greater severity)</li></ul> STAKEHOLDER MANAGEMENT Internal: <ul><li>EMR Management (O&M Base Team)</li><li>O&M Core Teams of other French offshore farms</li><li>Industry Department (Performance and Engineering)</li><li>Operational Center (OCC)</li></ul>External: <ul><li>Subcontractors for maintenance of offshore wind substation, wind turbines, foundations, and inter-wind turbine cables</li><li>Crew Transfer Vessel (CTV) Crews</li><li>RTE (Réseau de Transport d'Électricité)</li><li>CROSS (Regional Operational Surveillance and Rescue Center)</li><li>Fishermen and boaters</li><li>Maritime Prefecture</li><li>SNSM (National Sea Rescue Society)</li><li>Gendarmerie Maritime</li><li>Harbour Master's Offices</li></ul> MANDATORY REQUIREMENTS <ul><li>Valid Passport (minimum 1 year validity)</li><li>Right to work in France</li><li>Proficiency in French (working language)</li><li>PPE as per defined HSE requirements (provided by contractor)</li></ul> Offshore Wind Farm Operations • Fécamp Site • Marine Coordination Department

Marine Coordinator

Foundation Transport & Installation Package Manager Location: Site, home based and office. (Swindon & London) Duration: 23/02/2026 to 28/02/2027 Rotation: Monday-Friday, 8 hours a day Type: Freelance, outside IR35 Rate: £800 a day Project: Awel y Mor Description: The role will be responsible for the delivery of the safe and efficient transport & installation of the WTG foundations for the Awel Y Mor Offshore Wind Farm. CERTIFICATIONS • Hold a degree or equivalent in Mechanical, Civil or Electrical Engineering, Marine Logistics, Renewable Energy or another closely related engineering or science area. • Have significant demonstratable experience in the project management of the successful and safe execution of offshore wind farm projects. • Have significant demonstratable experience of, and knowledge in, the transportation and installation of offshore foundations. • Have demonstratable experience of the contracts used in offshore in offshore construction and vessel chartering. • Have comprehensive and demonstratable competence in HSE aspects of offshore construction and site management; including working in accordance with the Health & Safety at Work Act 1974 [H&S@W 1974] and CDM 2015. OTHER REQUIREMENTS • A team player comfortable working closely with your colleagues as part of an exciting and determined multinational global team; • A motivated, passionate, keen problem solver with excellent communication and interpersonal skills; • Willing, and able, to travel regularly within UK and globally on an ad hoc basis as required to support our projects; • Willing, and able, to work offshore and at heights; • Fluent in both spoken and written English. SCOPE OF WORKS • The planning, coordination and execution of the transportation & installation of foundation structures in accordance with key project metrics programme, budget, quality and in accordance with industry best practice. • Working efficiently as part of a multi-discipline, matrix team of functional specialists dedicated to ensuring the safe, timely and value optimised delivery of the works. • The negotiation, and subsequent management, of transport and installation contracts with support from Contract Management, Procurement and Legal and other specialist functions. • Developing and maintaining, with support of specialist functions, the package programme and budget ensuring the effective management of risk, opportunities and maintaining a focus on value. • Interfacing with both internal and external stakeholders [contractor, marine warranty survey, regulator bodies, etc] ensuring efficient and timely delivery of the works. • HSE performance within the package, including close collaboration with Principal Contractor to ensure regulatory compliance. • Reporting to project leadership team in line with Project Management Framework and project governance.

Foundation Transport and Installation Package Manager

General Site Manager (Construction Manager) – Offshore 02/2026 – 02/2027 Awel y Mor & Dogger Bank South SCOPE OF WORKS <ul><li>Ensure that the Offshore Site Management function supports the installation and commissioning activities carried out through the tier 1 contractors.</li><li>Responsible for advising and reporting to the Senior Project Manager, the Engineering Manager, the Senior Consents Manager and the Installation Package Managers ensuring and aligned, coherent and safe project execution.</li><li>Planning and co-ordinating the Offshore Site Management works in line with company site management plan, site management philosophy, company values, internal compliance policies and regulations, external regulations, the Project Management Framework (PMF), and project governance.</li><li>Ensuring all works adhere to the company’s HSE policies, 8 Life-Saving Rules, ‘we care’ essential behaviour principles, and region specific legislation and regulations, including but not limited to H&S@W 1974 and CDM 2015.</li><li>HSE emergency response planning including medical needs and clinical governance, and proactive HSE monitoring.</li><li>Collaborating closely with the Procurement department to implement a procurement process, from ITT development to contract signing for all site management related contracts.</li><li>Working within team of experts to provide specialist input for delivering the Offshore Site Management works.</li><li>Supporting the engineering process within the package, ensuring buildability, operational considerations, interfaces, and safety by design are fully addressed.</li><li>Develop resource plans and budgets for Offshore Site Management works.</li><li>Accurate and timely reporting, while identifying, mitigating, and addressing risks and opportunities as needed.</li></ul> CERTIFICATIONS <ul><li>Hold a degree or equivalent in Mechanical, Civil or Electrical Engineering, Marine Logistics, Renewable Energy or another closely related engineering, science or Project Management area.</li><li>Have significant demonstratable experience in leading the successful and safe execution of offshore wind farm projects.</li><li>Have demonstratable experience of the contracts used in offshore in offshore construction and vessel chartering.</li><li>Have comprehensive and demonstratable competence in HSE aspects of offshore construction and site management; including working in accordance with the Health & Safety at Work Act 1974 [H&S@W 1974] and CDM 2015.</li></ul> OTHER REQUIREMENTS <ul><li>A team player comfortable working closely with your colleagues as part of a team;</li><li>A motivated, passionate, keen problem solver with excellent communication and interpersonal skills;</li><li>Willing, and able, to travel regularly within UK and globally on an ad hoc basis as required to support our projects;</li><li>Willing, and able, to work offshore and at heights;</li><li>Fluent in both spoken and written English.</li></ul>

General Site Manager

Warehouse Coordinator – Junior Business Unit: Operations Duration: 01/03/2026 – 30/06/2026 Inside IR35 Description: We are looking for a trained inventory and distribution specialist to operate with the Barrow Area Warehouse. Their role will be focused on accuracy of inventory and order fulfilment, overseeing stock levels and maintaining records. The Consultant will be provided with a laptop. External consultants’ equipment such as PCs, mobile phones and iPads must always be up to date with the latest iOS release. The owner must allow clients Air Watch security and management software for iPhones and iPads to be installed. The app is mandatory on all mobile devices used by client staff (including External consultants) to protect them from cybercrime. The owner must grant approval for client to remove apps, data and access from privately owned equipment if it is deemed to pose a risk in relation to client security or the GDPR regulations, if the equipment is lost/stolen, or if the owner ceases to have an active contract with Magnit and/or client. When an external consultant leaves the client, they must contact the IT Service Desk to remove all clients apps and data. The IT Service Desk can only support privately owned equipment in connection with clients AirWatch security and management software. Requirements: Preferably candidates are local (Barrow in Furness) or state on their CV / cover letter that they are willing to relocate as client will not cover any costs for accommodation Essential - Clean driving license - Qualified forklift truck driver - Technologically Proficient - IT literate (SAP or similar ERP system and Microsoft Office package) - GCSEs in English and Maths (or equivalent) are essential. - Fluent in English language skills - Strong organizational skills and attention to detail - Ability to manage multiple tasks and priorities efficiently - Excellent communication skills, both verbal and written - Problem-solving mindset with a proactive approach - Comfortable using technology and learning new software tools - A passion for sustainability and green energy Desirable - HSE Experience - General good IT skills - Previous experience in warehouse management, logistics, or supply chain is desired

Warehouse Coordinator

About the Organization We are one of the largest energy companies in Europe, generating electricity and heat and supplying energy to millions of customers across Sweden, Germany, the United Kingdom, France, Denmark, Finland, and the Netherlands. With approximately 21,000 employees, we are enabling a future that is less dependent on fossil fuels. We are at the forefront of the transition to a sustainable energy system. The Marketing & Commercial Operations team is responsible for the entire commercial value chain of consumer and small business customers in the Netherlands. Our focus is on acquiring new customers, retaining existing customers, and cross- and upselling electricity, gas, and energy-related products and services. We believe in approaching the right customer with the right message and offer, at the right time, through the right channel—maximizing both customer satisfaction and commercial results. Objective of the Assignment Develop a strong, creative, out-of-the-box acquisition plan to recruit new customers. Identify opportunities, apply them to our organizational context, and deploy new initiatives to achieve acquisition goals. Key Responsibilities <ul><li>Develop a comprehensive, creative acquisition plan from the full breadth of the marketing mix</li><li>Identify (new) growth segments and channel initiatives</li><li>Drive relevant proposition development and explore collaboration opportunities</li><li>Optimize conversion opportunities through data-driven performance marketing</li><li>Challenge existing organizational approaches and current initiatives</li><li>Ensure operational readiness for handover to the acquisition team (11 FTE)</li><li>Deliver actionable recommendations based on customer insights, competitor analysis, and organizational strengths/weaknesses assessment</li></ul> Required Profile You are a powerful senior marketing manager who is highly motivated to deliver the best value for both customers and the company. You combine strong strategic skills with analytical and creative capabilities. You are solution-oriented, proactive, and collaboration-focused. Essential Experience & Skills: <ul><li>~10 years of work experience as a Senior Marketing Manager in strategic marketing and/or sales in a B2C environment</li><li>Proven track record in corporate organizations within a similar field</li><li>Demonstrated expertise in developing strong commercial plans focused on new customer acquisition</li><li>Strong analytical skills for SWOT assessment (organizational strengths/weaknesses market opportunities/threats)</li><li>Deep expertise in data-driven performance marketing, campaign optimization, and effective personalization/targeting</li><li>Sales-oriented mindset with proven ability to manage results, drive sales intention, and continuously renew sales activities</li><li>Experience stimulating employees in a data-driven, learning (corporate) organization</li><li>Languages: Excellent command of Dutch and English (written and spoken)</li></ul>Preferred: <ul><li>Experience in the energy sector</li><li>Solution-oriented and proactive approach</li></ul>

Project Manager - Marketing Acquistion

Senior Authorised Person (SAP) – Hyperscale Data Centre Projects  We are seeking an experienced Senior Authorised Person (SAP) to join our clients team on cutting-edge hyperscale data centre projects in Germany. This is an exciting opportunity to play a key role in the safe and efficient operation of HV/ MV and LV systems within one of the world’s fastest-growing infrastructure sectors. You will be responsible for implementing, supervising, and controlling all electrical switching operations, isolations, and energisation activities in accordance with project and client safety standards.  Key Responsibilities<ul><li>Manage and oversee HV/ MV and LV  electrical operations, ensuring full compliance with safety rules and site procedures.</li><li>Prepare and execute switching schedules, isolation procedures, and testing protocols.</li><li>Issue and control safety documentation, including permits, limitations, and sanction-for-test.</li><li>Coordinate with design, construction, and commissioning teams to ensure system integrity.</li><li>Maintain a high standard of safety awareness and ensure adherence to EN 50110-1 and other relevant standards.</li><li>Provide guidance and training to authorised and competent persons as required.</li></ul>Requirements<ul><li>Proven experience working as a Senior Authorised Person (SAP)</li><li>SAP certification</li><li>Extensive hands-on experience with HV and LV electrical networks.</li><li>In-depth knowledge of switching schedules, isolation protocols, and operational safety rules.</li><li>Familiarity with operational safety documentation and relevant industry standards (e.g. EN 50110-1).</li><li>Strong communication and coordination skills, with the ability to work within multi-disciplinary teams.</li></ul>Why Join Us<ul><li>Work on world-class hyperscale data centre projects with leading global clients.</li><li>Competitive compensation package and accommodation/travel support (ipp</li><li>Opportunity for long-term engagement and career development within a growing international team.</li></ul> Visa can be provided for UK Citizens

Senior Authorised Person - Frankfurt

Develop a strong, creative, out-of-the-box acquisition plan to recruit new customers. Identify opportunities, apply them to our organizational context, and deploy new initiatives to achieve acquisition goals. You are a powerful Senior Marketing Manager who is highly motivated to deliver the best value for both customers and the company. You combine strong strategic skills with analytical and creative capabilities. You are solution-oriented, proactive, and collaboration-focused. Key Responsibilities <ul><li>Develop a comprehensive, creative acquisition plan from the full breadth of the marketing mix</li><li>Identify (new) growth segments and channel initiatives</li><li>Drive relevant proposition development and explore collaboration opportunities</li><li>Optimize conversion opportunities through data-driven performance marketing</li><li>Challenge existing organizational approaches and current initiatives</li><li>Ensure operational readiness for handover to the acquisition team (11 FTE)</li><li>Deliver actionable recommendations based on customer insights, competitor analysis, and organizational strengths/weaknesses assessment</li></ul> Essential Experience & Skills: <ul><li> 10 years of work experience as a Senior Marketing Manager in strategic marketing and/or sales in a B2C environment</li><li>Proven track record in corporate organizations within a similar field</li><li>Demonstrated expertise in developing strong commercial plans focused on new customer acquisition</li><li>Strong analytical skills for SWOT assessment (organizational strengths/weaknesses market opportunities/threats)</li><li>Deep expertise in data-driven performance marketing, campaign optimization, and effective personalization/targeting</li><li>Sales-oriented mindset with proven ability to manage results, drive sales intention, and continuously renew sales activities</li><li>Experience stimulating employees in a data-driven, learning (corporate) organization</li><li>Languages: Excellent command of Dutch and English (written and spoken)</li></ul>

Project Manager – Marketing Acquisition

Contract Manager Project Name: Contract managers Duration: 02-Mar-2026 - 19-Jun-2026 Business Unit: Procurement Rotations: Monday-Friday, 7.5hr a day Location: Copenhagen, Denmark Description: <ul><li>Lead end-to-end IT contract lifecycle management (drafting, negotiation, execution, renewal, termination)</li><li>Develop, review, and negotiate IT agreements (SaaS, software licenses, cloud services, managed services, hardware, consulting)</li><li>Managing claims</li><li>Comfort working with both project-based contracts and recurring SaaS/software agreements.</li><li>Demonstrated experience handling major IT vendors (e.g., hyperscalers, SaaS, software licensing, implementation partners).</li><li>Ensure contracts align with client policies, risk appetite, cybersecurity standards, and regulatory requirements</li><li>Partner with Legal, Finance, and business stakeholders to structure commercial and contractual terms</li><li>Drive commercial optimization including cost control, value realization & benchmarking</li><li>Identify and mitigate contractual, operational, data privacy, and information security risks</li><li>Support IT sourcing initiatives</li><li>Maintain contract repository and ensure compliance with contract management best practices</li><li>Lead contract renewal strategies and renegotiations to optimize value and mitigate auto-renewal risks</li><li>Ensure compliance with data protection regulations (e.g., GDPR), IP rights, and cybersecurity clauses</li><li>Provide contract advisory support to IT stakeholders and project managers</li></ul> Requirements: <ul><li>Bachelor’s degree in Law, Business Administration, IT, or related field</li><li>3–7 years of experience in IT contract management, IT procurement, vendor management, or software licensing.</li><li>Strong understanding of IT commercial models (SaaS, subscription, licensing, cloud consumption models)</li><li>Proven experience negotiating IT agreements with global vendors</li><li>Knowledge of IT risk areas including data protection, cybersecurity, IP rights, and liability frameworks</li><li>Strong commercial acumen and analytical skills</li><li>Able to plan and negotiate renewals and additional purchases for IT vendors</li><li>Experience working cross-functionally with IT, Legal, Finance, and senior stakeholders</li><li>Familiarity with contract lifecycle management (CLM) systems</li><li>Strong stakeholder management and communication skills</li><li>Ability to balance risk mitigation with commercial pragmatism</li><li>Experience in international contracting environments</li></ul>

Cost Engineer

My client is a large energy provider and is seeking an experienced Cost Engineer to support one of their UK projects during the Construction Phase. The Cost Engineer will be responsible for comprehensive cost control, forecasting, and financial oversight to ensure accurate and transparent project performance management. Key Responsibilities <ul><li>Cost Forecasting & Financial Monitoring</li><li>Cost Control & Expenditure Management</li><li>Reporting & Financial Compliance</li><li>Stakeholder Collaboration</li></ul> Key Qualifications and Experience <ul><li>Proven knowledge and understanding of construction contracts within the renewables sector or comparable large infrastructure projects (essential).</li><li>Advanced proficiency in Excel (essential).</li><li>Experience with SAP or similar ERP systems (advantageous).</li><li>Fluency in English (essential); additional European languages are a plus.</li><li>Quantity surveyor qualification or similar certification (advantageous).</li><li>Strong communication and organizational skills.</li><li>Ability to work effectively in a dynamic, international environment with an entrepreneurial mindset.</li><li>Demonstrated ability to manage relationships with multiple stakeholders across a matrix organisation.</li></ul> For more info, do not hesitate to get in touch!

Position: Test Field Technician Site / Location: DE – Brilon Description Synthesises customer contractual needs and requirements into system test solutions that acknowledge technical, schedule, and cost constraints. Develops and directs preparation and execution of comprehensive test plans, procedures, and schedules for completing systems. Coordinates integrated testing activities. Reviews and evaluates test requirements to ensure completeness of the test program. Performs technical analysis of complete systems and prepares comprehensive system-level evaluations. Additional Hiring Information for Supplier Additional Info <ul><li>Working hours: 2-shift system<ul><li>AM: 06:00–13:30</li><li>PM: 13:30–21:00</li><li>Monday to Friday</li></ul></li><li>Flexible working hours (shifts may vary; TBC with manager)</li></ul>Your Responsibilities <ul><li>Routine, type, and special electrical testing of dry-type and traction transformers in accordance with national and international standards</li><li>Preparation of the required test reports</li><li>Analysis and testing of returned goods</li><li>Participation in customer acceptance testing (also in English)</li><li>Final mechanical inspection of the finished product</li></ul>Your Profile <ul><li>Completed vocational training in an electrical engineering field, e.g., State-certified Electrical Engineering Assistant</li><li>Ability to work at heights</li><li>Good cooperation and communication skills</li><li>Willingness to work in a 2-shift system</li><li>Flexibility and a meticulous work ethic</li><li>German mandatory good written and spoken English skills</li></ul>

Test Field Engineer - Prüffeldtechniker

Contract Manager

Project Manager Start date: ASAP Location: Olen, Belgium Duration: April start running until end of year, options to extend long term. Type: Freelance Description Explanation about the client This client is a global leader in materials technology, headquartered in Belgium with four local sites. The company develops and produces high performance materials for solar cells, rechargeable batteries and catalysts, and recovers valuable metals from electronic devices through recycling. The client aims to be a world leader in clean mobility materials and recycling, turning its sustainability strategy into a competitive advantage. Department description and responsibilities The core of the clients worldwide Research & Development activities is located in Olen. Research at with the client focuses on new materials and processes that respond to global trends such as raw material scarcity and clean mobility. CRD is committed to developing new methods, solutions, and technologies for a cleaner future. Project description A new laboratory building is being constructed in Olen, project Glasgow. The overall building design, calculations, 3D modelling and utilities concepts have already been completed. The next phase focuses on: • Designing and equipping a flexible, modular laboratory environment capable of supporting multiple teams. • Setting up or relocating an analysis laboratory, including defining which analytical methods will move to the new building. • Determining the optimal laboratory layout (floorplan, safety, flows, utilities, equipment, etc.). • Preparing for the transfer of teams into the new facility. • Full involvement in the execution phase in 2027, with project completion expected end of 2028. Primary tasks and responsibilities • Phase 1 – Analysis, concept development & budget (2026) • Review and integrate existing engineering and 3D design deliverables into the laboratory fit out planning. • Translate analytical and user requirements into a functional modular laboratory concept (layout, flows, utilities, safety). • Establish cost estimates and investment budgets for the laboratory fit out. • Prepare the annual capex request (planning, scenarios, risk assessments). • Phase 2 – Detail engineering & execution (2027-..) • Coordinate detailed laboratory engineering with internal engineering departments, utilities, design partners, and suppliers. • Schedule, track and steer progress using Planisware or equivalent PM tooling. • Manage contractors, integrators and equipment suppliers during installation and commissioning. • Ensure compliance with safety (VCA, HSE, regulatory) and environmental rules. • Organise FAT/SAT and qualification steps where relevant. • Coordinate the phased relocation of three CRD teams to the new laboratory environment. • Project management, governance & stakeholder communication • Own the scope, budget, timing and quality of the entire laboratory fit out package. • Identify and mitigate risks, issue management, scenario planning. • Report status and key decisions to the Hiring Manager and stakeholders (CRD, production, engineering, maintenance, HSE). • Facilitate workshops and structured decision making processes with laboratory users and technical teams. Technical profile requirements • Master’s degree in Engineering or Applied Sciences (mechanical, chemical/process, electromechanics or equivalent). • Minimum several years of experience managing technical or engineering projects (lab infrastructure, utilities). • Experience with the design and implementation of a laboratory is mandatory. • Strong understanding of technical utilities (HVAC, gases, ventilation, electrical supply, clean utilities). • Ability to read and interpret technical drawings, 3D models and P&IDs. • Knowledge of safety and regulatory frameworks (ATEX is an advantage). • Strong command of MS Office and experience with PM tools such as Planisware. • Experience with LIMS is a plus. Non Technical profile requirements • Strong leadership and stakeholder management skills, able to steer multidisciplinary teams. • Excellent communication skills, both written and verbal. • Structured, analytical and able to manage complexity. • Hands on, pragmatic and willing to be highly present on site, especially during execution. • Quality driven and safety focused. • Ability to handle multiple priorities and make well founded decisions. Methodology / Certification requirements • VCA?VOL required (or willingness to obtain before execution phase). • Project management certification (PMP, Prince2, …) is a plus. • ATEX is a plus Language proficiencies • Fluent Dutch (spoken & written). • Good command of English to understand technical documentation and interact with suppliers/stakeholders. Location • Primary location: Olen • Standard client policy applicable (3 days onsite / 2 days home office) during preparatory phases and after onboarding period. • Near full onsite presence required during execution and if needed for other project phases Contract • Start date: mid April 2026 (negotiable). • Contract till EOY 2026, with the objective to extend for the execution of the project. • Full time assignment. • Interview flow: o 1st interview via Microsoft Teams o 2nd interview on site (Olen) Required Skills Experience as Project Manager in an Engineering environment - 7 Years Experience with Laboratory-design& implementation - 5 Years Knowledge of Technical Utilities - 7 Years

Project Manager

We are seeking an experienced Lead Engineer &ndash; Drive System Specialist to take ownership of engineering activities across complex projects.&nbsp; Key Responsibilities
<ul>
<li>Lead and manage engineering activities across projects, ensuring compliance with client expectations, legal requirements, and industry standards.</li>
<li>Take full ownership of the Functional Safety lifecycle within projects.</li>
<li>Supervise, guide, and motivate teams of engineers, including external contractors, ensuring high-quality deliverables.</li>
<li>Mentor apprentices, trainees, junior, and graduate engineers to foster professional development.</li>
<li>Collaborate closely with Project Managers to deliver projects on time and within budget, proactively identifying and mitigating technical risks.</li>
<li>Participate in the Engineering Management Working Group, contributing to the development of internal standards and continuous improvement initiatives.</li>
<li>Develop electrical and controls concept designs, including Functional Design Specifications, Safety Requirements Specifications, Single Line Diagrams, Network Topologies, Device Layouts, Cause &amp; Effect Matrices, and Safety Block Diagrams.</li>
<li>Produce software design specifications and develop software/configuration deliverables for PLCs, HMI, SCADA, robots, drives, BMS, and related systems.</li>
<li>Lead Factory Acceptance Testing (FAT), Commissioning, and Site Acceptance Testing (SAT).</li>
<li>Maintain and own the Technical Construction File.</li>
<li>Undertake other duties as required to support project and business objectives.</li>
</ul>

Lead Controls Engineer

Supply Chain Officer 16/02/2026 &ndash; 29/05/2026 Antwerp, Belgium Client is a world leader in the highly specialised fields of dredging, solutions for the offshore energy market, infra marine and environmental works. With more than 140 years of experience and 5,200 highly skilled professionals, we bring tailor-made solutions, innovation and new technologies to our customers&rsquo; projects, ensuring that they are performed safely, efficiently and cost-effectively. The Supply Chain Officer ensures the organisation and implementation of the logistics process aimed at providing client with timely access to assets at optimal condition. As a Supply Chain Officer you are responsible for assisting the Transport Department to manage the day-to-day transport execution for Fleet and Projects Primary Tasks and responsibilities &middot; You are responsible for shipping supplies from client Head Quarters to the client Fleet worldwide. &middot; You organize transports upon request from client Sites within EU. &middot; You coordinate between the internal clients, agent, custom representative, warehouse, and forwarder. &middot; You are responsible for the operational follow-up and the administration of these transports: ordering transport services, processing logistics administration such as pro- forma invoices and packing lists, ensure proper custom registration and administer dangerous goods etc.. &middot; You process contracted purchase orders or request offers from selected logistic partners and find the best solution (economic and within schedule). Technical profile requirements &middot; You have a few years of experience in the logistics world, preferrable with multi-modal means of transport (air, road, sea); &middot; You have proper knowledge of legislation relating road, air or maritime transport; &middot; You have basic knowledge of customs regulations; &middot; Knowledge of regulations on dangerous goods is of added value; &middot; You like administration and are accurate &middot; Communication with stakeholders by mail and phone &middot; You strive for structure and planning in an everchanging maritime environment &middot; You are solution- driven, stress proof and providing service is a second nature &middot; You are fluent in Dutch (C2) and English. &middot; Proficient in MS Office and ERP systems (MAXIMO knowledge is a plus). Non-Technical profile requirements &middot; Strong negotiation abilities, with a communicative, analytical, and results-oriented approach. &middot; Collaborative mindset with a hands-on mentality. &middot; Project management capabilities are required. Language proficiencies &middot; Fluent speaking and writing English, proficiency in other languages is a major plus.

Supply Chain Officer

The Supply Chain Officer ensures the organisation and implementation of the logistics process aimed at providing DEME with timely access to assets at optimal condition. As a Supply Chain Officer you are responsible for assisting the Transport Department to manage the day-to-day transport execution for Fleet and Projects   Primary Tasks and responsibilities   <ul><li>You are responsible for shipping supplies from Head Quarters to the Fleet worldwide.</li><li>You organize transports upon request from Sites within EU.</li><li>You coordinate between the internal clients, agent, custom representative, warehouse, and forwarder.</li><li>You are responsible for the operational follow-up and the administration of these transports: ordering transport services, processing logistics administration such as pro- forma invoices and packing lists, ensure proper custom registration and administer dangerous goods etc..</li><li>You process contracted purchase orders or request offers from selected logistic partners and find the best solution (economic and within schedule).</li></ul>  Technical profile requirements   <ul><li>You have a few years of experience in the logistics world, preferrable with multi-modal means of transport (air, road, sea);</li><li>You have proper knowledge of legislation relating road, air or maritime transport;</li><li>You have basic knowledge of customs regulations;</li><li>Knowledge of regulations on dangerous goods is of added value;</li><li>You like administration and are accurate</li><li>Communication with stakeholders by mail and phone</li><li>You strive for structure and planning in an everchanging maritime environment</li><li>You are solution- driven, stress proof and providing service is a second nature</li><li>You are fluent in Dutch (C2) and English.</li><li>Proficient in MS Office and ERP systems (MAXIMO knowledge is a plus).</li></ul>  Non-Technical profile requirements <ul><li>Strong negotiation abilities, with a communicative, analytical, and results-oriented approach.</li><li>Collaborative mindset with a hands-on mentality.</li><li>Project management capabilities are required.</li></ul>  Language proficiencies   <ul><li>Fluent speaking and writing English, proficiency in other languages is a major plus.</li></ul> For more info, do not hesitate to get in touch!

The site comprises two substations located in the North Sea, approximately 50 km away from the western coast of Germany. &nbsp; Scope of Work:
<ul>
<li>Work alongside the Electrical Systems Package site representatives and Client Commissioning Team to assist in delivering the hot commissioning activities as Clients Engineer, driving the work scope forward on site to meet the project programme.</li>
<li>Client witness and sign off for Stage 1 and Stage 2 completion for Substations</li>
<li>Provide technical support for Project Senior Authorised Persons and M&amp;E Engineers.</li>
<li>Reporting to the Commissioning Manager (Lead)</li>
<li>Based principally in the Jack-Up Vessel following installation of the assets offshore. Alternatively, limited work period in the onshore construction yard before Load-Out.</li>
<li>Initial investigation and reporting of incidents</li>
<li>Plan, document and perform switching operations (66 kV &ndash; 155 kV) at offshore substations, export cables, and wind turbines in line with HV Safety Rules.</li>
<li>Manage the Permit to Work (PTW) system &ndash; Permit request and approval,.</li>
<li>Carry out fault diagnosis and troubleshooting on offshore HV equipment. Deliverables:</li>
<li>Weekly reporting and record keeping on progress and issues to the Commissioning Manager (Lead)</li>
<li>Liaise with Engineering and Quality Departments to ensure Outstanding Engineering/Quality Issues are resolved.</li>
<li>Interface with the IAC team, OSS team and WTG team.</li>
<li>Elaboration of Switching Plan and HV Switching Schedules.</li>
<li>Responsible for revision of accurate &lsquo;As Built&rsquo; Drawings and Records produced by Contractors.</li>
</ul>
&nbsp; Certifications:
<ul>
<li>Relevant technical education in an electrical engineering discipline</li>
<li>Certified Switching Operator (Schaltberechtigter) or eligibility to be certified with the corresponding training.</li>
<li>GWO basic safety training</li>
<li>GWO Enhanced First Aid Training (Ersthelfer Offshore DGUV)</li>
<li>Helicopter Underwater Escape Training (HUET)</li>
<li>Offshore medical fitness</li>
</ul>
&nbsp; Other requirements:
<ul>
<li>Proven experience as Senior Authorized Person in MV/HV assets (Client or Contractor role)</li>
<li>Knowledge of testing Alarms/Controls/Indications from a range of MV/HV Equipment</li>
<li>Knowledge of commissioning of LV/MV/HV Switchgear and associated components.</li>
<li>Knowledge of GE/Hitachi protection relays including IEC61850/Goose communications is desirable.</li>
<li>Experience of BMS Systems is desirable</li>
<li>Understanding of HV Safety Rules.</li>
<li>Self-starting with planning/coordination and problem solving abilities.</li>
<li>Fluent written and verbal English with good communication skills.</li>
<li>Broad knowledge of HV/MV equipment operations combined with commissioning experience.</li>
<li>Eligibility to be nominated as Electrical Person in Charge of the Electrical Installation.</li>
</ul>
 For more info, do not hesitate to get in touch!

Offshore HV Senior Commissioning Engineer

The Commissioning Manager for offshore Substations is responsible for managing all pre-commissioning, commissioning, and handover activities to ensure safe, timely, and efficient energization of offshore substations. This role requires strong leadership, technical expertise, and a focus on HSE compliance and quality assurance. Roles and Responsibilities<ul><li>Lead and coordinate the commissioning team, including engineers, vendors, and contractors.</li><li>Develop and maintain commissioning execution plans, schedules, and procedures.</li><li>Act as the single point of contact for all commissioning activities on the OSS.</li><li>Ensure commissioning activities align with project milestones and reporting requirements.</li><li>Oversee pre-commissioning and commissioning of HV systems, protection & control, SCADA, auxiliary, and mechanical systems.</li><li>Review and approve commissioning procedures and test documentation.</li><li>Troubleshoot technical issues and coordinate resolution with OEMs and contractors.</li><li>Ensure compliance with HSE standards, permits to work, and isolation procedures.</li><li>Conduct risk assessments and implement safe systems of work.</li><li>Track punch lists, manage non-conformities, and ensure closure before handover.</li><li>Verify documentation, statutory inspections, and certification requirements are met.</li><li>Coordinate handover of completed systems from construction to operations teams.</li><li>Provide training and knowledge transfer to operations/maintenance personnel.</li><li>Lead final acceptance tests (FAT/SAT) and ensure proper handover documentation.</li></ul>Qualifications and Skills<ul><li>Degree in Electrical Engineering, Mechanical Engineering, or related discipline.</li><li>Extensive experience in commissioning of offshore substations, power plants, or large-scale electrical infrastructure.</li><li>Strong knowledge of HV/MV/LV systems, protection and control, and SCADA systems.</li><li>Excellent leadership and coordination skills, with experience managing multi-disciplinary teams.</li><li>Familiarity with international standards (IEC, IEEE, etc.) and grid compliance requirements.</li><li>Strong focus on HSE compliance and safe systems of work.</li><li>Excellent problem-solving and troubleshooting skills.</li><li>Strong communication, reporting, and stakeholder management abilities.</li></ul>

Commiissioning Manager

As a Project Engineer, you will be integral in preparing and executing various offshore projects, acting as the bridge between the project team and the operational crew. Your role is vital in ensuring that projects are executed efficiently and effectively, contributing to client's mission of sustainable solutions in marine engineering. Primary Tasks and responsibilities <ul><li>Prepare, revise, and approve technical documentation for project design phases, ensuring adherence to standards, guidelines, and best practices.</li><li>Monitor and control costs during project execution.</li><li>Plan and execute all assigned tasks on time, safely, efficiently, reliably, and cost-effectively.</li><li>Manage vendors and contractors onsite, analyze potential risks, and recommend actions to mitigate issues related to construction (EHS, manpower, logistics).</li><li>Monitor installation processes</li></ul> Technical profile requirements <ul><li> 7 years of experience in Project Engineering in a marine environment.</li><li>In-depth understanding of dredging operations and vessel management.</li><li>In depth trenching experience needed as well as cable installation</li><li>Proficiency in project management software and tools (e.g., MS Project, Primavera).</li><li>Strong knowledge of engineering principles and practices related to marine, civil engineering.</li></ul> For more info, do not hesitate to get in touch!

Project Engineer - Dredging

Our cleitn specialises in designing and producing electronic components and accessories for the power transformer industry. Operating since 2009 they supply a range of transformer parts, including power transformer accessories and bespoke electrical fabrications, supported by deep technical expertise and tailored engineering solutions to meet exact customer requirements across the UK & Ireland. Key Duties You secure and expand local and regional customer relationships and business activities through systematic prospecting, networking and regular customer visits You present technical product information and conduct trainings for customers, agents and internal colleagues You support the preparation of quotations and ensure structured project and quotation tracking through continuous follow-up You monitor and coordinate complaint management for your designated countries in collaboration with internal departments You plan, organize and execute customer sales events in your region You prepare regular reports such as visit reports, market and customer insights and sales forecasts while maintaining close coopera-tion with our international sales organization in Germany and other subsidiaries Skills & Experience You have a Bachelor’s degree in Electrical and Electronic Engineering, Mechanical Engineering or a comparable qualification You have at least 5 years of sales experience, ideally in the power transmission and distribution field You build strong stakeholder relationships, communicate confi dently at all organizational levels and work effectively with customers,agents and internal teams You excel in value‑based selling: you research prospects thoroughly, identify customer challenges and convincingly articulate the value and economic benefi ts of our solutions You work independently, reliably and with a strong sense of ownership, even under tight deadlines; willingness to travel is natural for you You have strong numerical understanding, excellent presentation skills and a good command of written and spoken English; you are proficient in MS Office, with SAP and Salesforce knowledge being a plus

Sales Manager - Transformer Components

Join our clients team and work on world-class hyperscale data centre projects with leading global clients! We are seeking an experienced Electrical Authorised Person to ensure safety, compliance, and excellence across electrical commissioning and operations. Key Responsibilities Safety: <ul><li>Enforce company procedures including Control of Hazardous Energies, Permit to Work, and Lock-Out Tag-Out (LOTO) systems. </li><li>Ensure compliance with the Electrical Safe System of Work (ESSOW) and client safety directives. </li><li>Review and approve subcontractor electrical RAMS and COHE documentation. </li><li>Manage and control LOTO systems, safe switching, energisations, and isolations during commissioning. </li><li>Conduct regular safety audits, inspections, and incident reporting. </li><li>Ensure correct use, selection, and maintenance of electrical PPE and arc flash mitigation procedures. </li></ul>Technical: <ul><li>Perform commissioning, testing, troubleshooting, and inspection of LV/MV electrical systems, including MCCs, VSDs, switchgear, and distribution panels. </li><li>Read and interpret technical drawings, SLDs, and wiring diagrams. </li><li>Complete and record all pre- and post-energisation testing in compliance with local regulations. </li><li>Support all commissioning phases (Levels 1–5) and enforce the Electrical Permit to Work system. </li><li>Assist in electrical incident investigations and ensure safety and calibration of testing equipment. </li><li>Execute safe switching schedules and energisation procedures under SAP direction. </li><li>Collaborate effectively within multi-disciplinary teams. </li></ul>Why Join Us: <ul><li>Work on prestigious hyperscale data centre projects with global clients. </li><li>Competitive compensation package with accommodation and travel support. </li><li>Opportunity for long-term engagement and career development within a growing international team. </li></ul>visa support available for UK Citizens.

Authorised Person - Finland

Authorised Person - Denmark

Join the team and work on world-class hyperscale data centre projects with leading global clients! We are seeking an experienced Electrical Authorised Person to ensure safety, compliance, and excellence across electrical commissioning and operations. Key Responsibilities Safety: <ul><li>Enforce company procedures including Control of Hazardous Energies, Permit to Work, and Lock-Out Tag-Out (LOTO) systems. </li><li>Ensure compliance with the Electrical Safe System of Work (ESSOW) and client safety directives. </li><li>Review and approve subcontractor electrical RAMS and COHE documentation. </li><li>Manage and control LOTO systems, safe switching, energisations, and isolations during commissioning. </li><li>Conduct regular safety audits, inspections, and incident reporting. </li><li>Ensure correct use, selection, and maintenance of electrical PPE and arc flash mitigation procedures. </li></ul>Technical: <ul><li>Perform commissioning, testing, troubleshooting, and inspection of LV/MV electrical systems, including MCCs, VSDs, switchgear, and distribution panels. </li><li>Read and interpret technical drawings, SLDs, and wiring diagrams. </li><li>Complete and record all pre- and post-energisation testing in compliance with local regulations. </li><li>Support all commissioning phases (Levels 1–5) and enforce the Electrical Permit to Work system. </li><li>Assist in electrical incident investigations and ensure safety and calibration of testing equipment. </li><li>Execute safe switching schedules and energisation procedures under SAP direction. </li><li>Collaborate effectively within multi-disciplinary teams. </li></ul>Why Join Us: <ul><li>Work on prestigious hyperscale data centre projects with global clients. </li><li>Competitive compensation package with accommodation and travel support. </li><li>Opportunity for long-term engagement and career development within a growing international team. </li></ul>visa support available for UK Citizens.

Authorised Person - Belgium

Senior Authorised Person (SAP) – Hyperscale Data Centre Projects  We are seeking an experienced Senior Authorised Person (SAP) to join our clients team on cutting-edge hyperscale data centre projects in Belgium. This is an exciting opportunity to play a key role in the safe and efficient operation of HV/ MV and LV systems within one of the world’s fastest-growing infrastructure sectors. You will be responsible for implementing, supervising, and controlling all electrical switching operations, isolations, and energisation activities in accordance with project and client safety standards.  Key Responsibilities<ul><li>Manage and oversee HV/LV electrical operations, ensuring full compliance with safety rules and site procedures.</li><li>Prepare and execute switching schedules, isolation procedures, and testing protocols.</li><li>Issue and control safety documentation, including permits, limitations, and sanction-for-test.</li><li>Coordinate with design, construction, and commissioning teams to ensure system integrity.</li><li>Maintain a high standard of safety awareness and ensure adherence to EN 50110-1 and other relevant standards.</li><li>Provide guidance and training to authorised and competent persons as required.</li></ul>Requirements<ul><li>Proven experience working as a Senior Authorised Person (SAP)</li><li>SAP certification</li><li>Extensive hands-on experience with HV/MV and LV electrical networks.</li><li>In-depth knowledge of switching schedules, isolation protocols, and operational safety rules.</li><li>Familiarity with operational safety documentation and relevant industry standards (e.g. EN 50110-1).</li><li>Strong communication and coordination skills, with the ability to work within multi-disciplinary teams.</li></ul>Why Join Us<ul><li>Work on world-class hyperscale data centre projects with leading global clients.</li><li>Competitive compensation package and accommodation/travel support </li><li>Opportunity for long-term engagement and career development within a growing international team.</li></ul> Visas for UK Citizens can be provided

Senior Authorised Person - Belgium

Senior Authorised Person (SAP) – Hyperscale Data Centre Projects  We are seeking an experienced Senior Authorised Person (SAP) to join our clients team on cutting-edge hyperscale data centre projects in Ireland. This is an exciting opportunity to play a key role in the safe and efficient operation of HV/ MV and LV systems within one of the world’s fastest-growing infrastructure sectors. You will be responsible for implementing, supervising, and controlling all electrical switching operations, isolations, and energisation activities in accordance with project and client safety standards.  Key Responsibilities<ul><li>Manage and oversee HV/LV electrical operations, ensuring full compliance with safety rules and site procedures.</li><li>Prepare and execute switching schedules, isolation procedures, and testing protocols.</li><li>Issue and control safety documentation, including permits, limitations, and sanction-for-test.</li><li>Coordinate with design, construction, and commissioning teams to ensure system integrity.</li><li>Maintain a high standard of safety awareness and ensure adherence to EN 50110-1 and other relevant standards.</li><li>Provide guidance and training to authorised and competent persons as required.</li></ul>Requirements<ul><li>Proven experience working as a Senior Authorised Person (SAP)</li><li>SAP certification</li><li>Extensive hands-on experience with HV and LV electrical networks.</li><li>In-depth knowledge of switching schedules, isolation protocols, and operational safety rules.</li><li>Familiarity with operational safety documentation and relevant industry standards (e.g. EN 50110-1).</li><li>Strong communication and coordination skills, with the ability to work within multi-disciplinary teams.</li></ul>Why Join Us<ul><li>Work on world-class hyperscale data centre projects with leading global clients.</li><li>Opportunity for long-term engagement and career development within a growing international team.</li></ul>

Senior Authorised Person - Ireland

Senior MEP Commercial Manager  Data Centres 📍 Netherlands We are working with a leading Tier 1 contractor delivering large-scale data centre projects across the Netherlands. Due to continued growth, they are seeking an experienced Senior MEP Commercial Manager to lead the commercial performance of multiple mission-critical projects. The Role<ul><li>Lead commercial management from tender through to final account</li><li>Manage and mentor project commercial teams</li><li>Oversee contracts, procurement, valuations, cash flow, and risk management</li><li>Drive margin protection and commercial controls</li><li>Support contract negotiations, dispute avoidance, and resolution</li><li>Act as the key commercial interface with senior leadership and clients</li></ul>About You<ul><li>Proven experience in a Senior MEP Commercial Manager role</li><li>Background with a Tier 1 construction contractor</li><li>Strong knowledge of contract administration, risk, and dispute management</li><li>Experience leading commercial teams across major projects</li><li>Excellent communication and stakeholder management skills</li></ul>Desirable<ul><li>Data centre or mission-critical project experience</li><li>Chartered status (RICS / CIOB or equivalent)</li></ul>What’s on Offer<ul><li>Competitive salary and benefits</li><li>26 days annual leave plus company days</li><li>Long-term career opportunities on flagship data centre programmes</li></ul>

Senior MEP Commercial Manager

Position Overview The Construction Coordinator will support the execution of Engineer Procure Construct (EPC), construction management, and program management projects across diverse industries including aviation, commercial construction, electrical transmission & distribution, facilities, manufacturing, oil & gas, power generation, process, and water. This role is responsible for assisting with project safety, quality, schedule, cost control, procurement, contracts, subcontractor management, documentation, reporting, project turnover, and field-based coordination. The Construction Coordinator will work closely with project managers, field teams, suppliers, and clients to support efficient project execution in alignment with company standards. Key Responsibilities Project & Client Support <ul><li>Assist in building and maintaining strong client relationships; interface with clients on proposals and project-related matters.</li><li>Support the execution of prime contracts, subcontract agreements, and change orders.</li></ul>Project Execution & Planning <ul><li>Assist with developing and implementing:<ul><li>Project Execution Plans</li><li>Quality Assurance Plans</li><li>Safety & Health Plans</li><li>Subcontracting Plans</li><li>Staffing Plans</li><li>Organization Charts</li><li>Procurement Plans</li></ul></li><li>Support mobilization and demobilization activities for jobsite setup.</li><li>Aid in securing required project permits.</li></ul>Procurement & Subcontractor Coordination <ul><li>Coordinate supplier and subcontractor registration and prequalification.</li><li>Assist in the creation of RFP packages, bid solicitation, evaluation, and scope-of-work documents.</li><li>Support subcontract administration including RFIs, submittals, change management, and claims mitigation.</li></ul>Project Controls & Reporting <ul><li>Assist with cost reporting, scheduling, WBS development, project setup, and field progress tracking.</li><li>Prepare internal and external reports including budgets, cost summaries, cash flow forecasts, and status reports.</li><li>Participate in review meetings; take minutes and distribute documentation.</li><li>Conduct safety, quality, financial, and progress audits as required.</li></ul>Documentation & Administration <ul><li>Maintain project documentation systems, filing, and recordkeeping.</li><li>Support turnover documentation, warranty administration, and project closeout.</li><li>Assist with subcontractor, supplier, and prime contract invoice processing.</li></ul>Field & Craft Support <ul><li>Assist with onboarding of craft and field supervision personnel.</li><li>Analyze composite crew rates to support labor and equipment cost tracking.</li><li>Monitor craft classifications, progression, training standards, and labor law compliance.</li><li>Support estimating, forecasting, earned value analysis, and unit rate management.</li><li>Coordinate construction equipment inventory and allocation.</li></ul>Other <ul><li>Perform additional duties as assigned.</li><li>Ensure compliance with all company policies, procedures, and safety programs.</li></ul>Qualifications Education & Experience <ul><li>Bachelor’s Degree in Construction Management, Engineering, or related field preferred.</li><li>Equivalent experience may be substituted in lieu of degree.</li></ul>Technical Skills <ul><li>Proficiency in Microsoft Office Suite (Word, Excel, Outlook, PowerPoint, Access).</li><li>Knowledge of document control systems, cost control tools, scheduling platforms, and project management software is preferred.</li></ul>Professional Skills <ul><li>Excellent verbal and written communication abilities.</li><li>Strong organizational, analytical, and problem-solving skills.</li><li>High attention to detail with the ability to handle large workloads and multitask in fast-paced environments.</li><li>Must meet company driving requirements.</li></ul>

Construction Coordinator

Role objective / Success criteria / KPI: Checks, inspections, repair and maintenance offshore on Balance of plant assets (Site Technician BOP) Repair and maintenance on- and offshore OSS until OFTO divestment phase closure (Site Technician OSS/OFTO). Responsibilities <ul><li>Day to day tasks BOP and OSS/OFTO asset and ad hoc tasks</li><li>Responsible for the Site Technicians. Rota, timesheets etc.</li><li>Overall daily planning of tasks and RAMS</li><li>Repair and maintenance of BOP, OFTO and extra tasks as agreed in the projects</li></ul> Tasks <ul><li>Operating, checking and managing the maintenance of the OSS- crane, davit lifting systems and manual hoists</li><li>Maintenance and replacement of defective fall-arrestors</li><li>Assist in snags after installation</li><li>Cleaning of offshore assets using jet/power washer (includes boat landings etc.)</li><li>Responsible for managing all toilets changing out and cleaning by sub-contractor</li><li>Inspection and re-certification of statuary items</li><li>Ad-hoc tasks (both onshore and offshore)</li></ul> Mandatory: <ul><li>GWO courses: Sea Survival, Working at Heights, First Aid, Fire Awareness, Manual Handling.</li><li>BOSIET/HUET incl. CA-EBS</li><li>OGUK Medical certificate incl. Chester Step</li><li>Relevant education: Rigger/Bandsman/Slinger, Cutting/Grinding/Drilling</li></ul> For more information, do not hesitate to get in touch!

Lead Site Technician

Job Description: Quality Engineer Location: Amsterdam, North Holland Hours: 40 hours per week Duration: March 2026 – September 2027 About the Role We are seeking an experienced Quality Engineer to oversee mechanical works on a major construction site in Amsterdam. In this versatile and critical role, you will serve as the primary supervisor for all mechanical construction activities, ensuring contractors deliver work safely, on time, and to the highest quality standards. You will act as a central coordinator for quality assurance, documentation management, and regulatory compliance—spanning the entire project chain from component manufacturing and delivery to final construction and commissioning. Key Responsibilities Site Supervision & Quality Assurance <ul><li>Supervise all mechanical work on the construction site, ensuring compliance with contract specifications, permits, and applicable legislation</li><li>Review and approve Inspection and Test Plans (ITPs)</li><li>Attend pre-inspection meetings and witness critical testing activities</li><li>Coordinate the deployment of specialized inspection personnel as required</li><li>Oversee quality control throughout the supply chain: manufacturing, delivery, installation, and final construction</li></ul>Documentation & Compliance Management <ul><li>Manage complete project documentation lifecycle, ensuring all protocols and reports are complete, accurate, and available prior to commissioning</li><li>Serve as supervisor for external certifications and regulatory inspections</li><li>Coordinate with authorities including fire brigade, municipal bodies, and certification entities for CE, ATEX, and Inspection before Commissioning (KVI)</li></ul>   Strategic Collaboration & Leadership <ul><li>Partner closely with the HSE Manager to maintain exemplary safety and health standards, leading by example at all times</li><li>Monitor construction planning and proactively advise the Site Manager on schedule optimization</li><li>Provide expert input to Site Manager, Project Manager, and Contract Manager regarding claims and additional work assignments</li><li>Report directly to the Site Manager and serve as primary point of contact and deputy in their absence</li></ul>Your Profile Education: Completed HBO (Bachelor) degree in Mechanical Engineering Experience: Minimum 5 years demonstrable experience as Quality Manager and/or Construction Manager in industrial construction; energy or chemical sector experience preferred Languages: Fluent in both Dutch and English Safety Focus: Uncompromising commitment to HSE performance Core Competencies: <ul><li>Strong organizational skills with ability to impose structure on contractors and external specialists</li><li>Excellent interpersonal and communication abilities; confident engaging with diverse stakeholders</li><li>Collaborative mindset with natural leadership presence</li><li>Meticulous approach to documentation and compliance requirements</li></ul>

Quality Engineer - Netherlands

Engineering & Construction Manager Location: Amsterdam, North Holland (Bijlmer Arena) with one day per week in Utrecht (Central Station) Hours: 40 hours per week Duration: March 6, 2026 – February 28, 2027 About the Role We are seeking an experienced E&C Manager to provide crucial support to the Engineering Manager in managing and streamlining the entire engineering workflow within a major industrial project. In this dynamic role, you will play an instrumental part in team assembly, technical documentation development, quality monitoring, and cost evaluation throughout all project phases. This position involves occasional travel to project locations and reference visits to similar installations both domestically and internationally. Key Responsibilities Engineering Workflow Management <ul><li>Support the Engineering Manager in managing and streamlining the complete engineering workflow from basic engineering through to final tendering</li><li>Play a crucial role in assembling an effective project team comprising internal specialists and external suppliers</li><li>Closely support design development across all project phases</li></ul>Technical Documentation & Standards <ul><li>Draft necessary technical documentation and establish critical preconditions for discipline engineers</li><li>Ensure high-quality English-language engineering and tender documents are produced</li><li>Prepare meeting reports and presentations to support project administration</li></ul>Quality, Progress & Cost Control <ul><li>Continuously monitor quality and progress of engineering work</li><li>Actively contribute to preparation of cost estimates</li><li>Participate in project meetings and negotiations</li><li>Assist with bid evaluations and formulation of award recommendations</li></ul>Your Profile Education: Completed HBO degree in Process Engineering, Mechanical Engineering, Electrical Engineering, or Power Plant Technology Experience: Extensive experience with engineering processes and planning in a multidisciplinary, industrial environment; background in (petro)chemical or energy sectors preferred Languages: Excellent command of Dutch and English with ability to deliver high-quality technical documentation in English Core Competencies: <ul><li>Strong analytical skills with structured, detail-oriented approach</li><li>Natural leadership qualities and ability to motivate teams</li><li>Cultural sensitivity and social skills for effective team building</li><li>Ability to solve complex challenges in multidisciplinary settings</li><li>Uncompromising focus on design safety</li></ul>Work Environment & Travel <ul><li>Primary base: Amsterdam office (Bijlmer Arena)</li><li>Weekly presence required: One day per week in Utrecht (Central Station)</li><li>Travel: Occasional visits to project locations and reference installations domestically and internationally as required by project needs</li></ul>Reporting Structure You will report directly to the Engineering Manager and work closely with them to ensure seamless project execution and team cohesion.

E&C Manager  - Netherlands

CX Lead – Data Centre (Contract)  Groningen, Netherlands An experienced CX Lead is required for a large-scale data centre project in Groningen. This is a long-term contractor opportunity on an established campus with further phases already planned. The Role: <ul><li>Lead the full commissioning (CX) process from pre-commissioning through to final handover</li><li>Own the commissioning strategy, programme, and readiness planning</li><li>Manage MEP commissioning and Integrated Systems Testing (IST) activities</li><li>Coordinate commissioning across MEP, BMS, controls contractors, and specialist vendors</li><li>Ensure systems are delivered safely, compliantly, and in line with programme milestones</li><li>Manage commissioning documentation, test scripts, snagging, and close-out</li></ul>Requirements: <ul><li>Proven experience as a CX Lead / Commissioning Manager on data centre projects</li><li>Strong MEP background within mission-critical environments</li><li>Confident working on site with multiple stakeholders and delivery teams</li><li>Available to start within the next month</li></ul>

Cx Lead

Senior Resource Coordinator 02/2026 – 02/2027 Gentofte, Denmark Monday - Friday The client's Construction and Logistics are looking for a one-year support to our team securing on-site resources such as client representatives, Offshore Coordinators, Site Technicians required during installation and commissioning of a project. You’ll collaborate with stakeholders both in projects and in group functions located either in our central offices globally, supporting daily planning and management of operations during execution. Together, you’ll have high focus on communication and on applying learnings across projects to continuously develop and improve our services. Responsibility: <ul><li>keep an overview of demand for specific resources and</li><li>create requests for sourcing external consultants to these roles based on demand.</li><li>onboard the external consultants and ensure the required access rights.</li><li>controlling time registration and handling invoices from contractors</li><li>As projects finish, you’ll help ensure that all contracts for external consultants are closed out.</li><li>maintain overview of contracts to ensure extensions are made in due time</li></ul> Preferred experience: <ul><li>Working in offshore wind Construction, HR, Engineering, Personal Assistant, Finance, Procurement etc. organisation and/or</li><li>Handling insourcing of contingency work and/or</li><li>Been in a coordinator role, before or</li></ul> Other transferable skills: <ul><li>Structured and attention to detail and timeline</li><li>Can work in a very fast paced environment</li><li>Thrives with engaging with many stakeholders internally and externally</li><li>Strong intercultural communication skills in English</li><li>Proactive in engaging with stakeholders to ensure timely delivery</li><li>Gets things done, prioritise and manage own time and tasks, and know when to ask for support</li><li>Team oriented as you will work closely with 2 colleagues</li><li>Comfortable with the Office suite and can learn about enterprise system</li></ul>

Senior Resource Coordinator

Resource Coordinator for Offshore Operations and Logistics Project Name: Offshore Operations and Logistics Duration: 10-Feb-2026 - 15-Feb-2027 Type: Freelance Location: Preferred Warsaw or Gdansk Rotation: Monday-Friday, 8 hours a day Description: Resource Coordinator The client Construction and Logistics are looking for a one-year support to our team securing on-site resources such as client representatives, Offshore Coordinators, Site Technicians required during installation and commissioning of a project. You’ll collaborate with stakeholders both in projects and in group functions located either in our central offices primarily in Europe or on-site, supporting daily planning and management of operations during execution. Together, you’ll have high focus on communication and on applying learnings across projects to continuously develop and improve our services. Responsibility: · keep an overview of demand for specific resources and · create requests for sourcing external consultants to these roles based on demand. · onboard the external consultants and ensure the required access rights. · controlling time registration and handling invoices from contractors · As projects finish, you’ll help ensure that all contracts for external consultants are closed out. · maintain overview of contracts to ensure extensions are made in due time Competencies · Preferred experience: o Working in offshore wind Construction, Engineering, Finance, Procurement etc. organisation and/or o Handling insourcing of contingency work and/or o Been in a coordinator role before or o Other transferable skills · Personality and skills: o Structured and attention to detail and timeline o Can work in a very fast paced environment o Thrives with engaging with many stakeholders internally and externally o Strong intercultural communication skills in English o Proactive in engaging with stakeholders to ensure timely delivery o Gets things done, prioritise and manage own time and tasks, and know when to ask for support o Team oriented as you will work closely with 2 colleagues o Comfortable with the Office suite and can learn about enterprise systems Location · Preferred Warsaw or Gdansk

Job Purpose: To ensure materials and equipment delivery controlling suppliers and alerting project team in case of delay Main Responsibilities: Procured materials and equipment delivery in compliance with project schedule requirements Key Activities: <ul><li>Tracking of materials and equipment suppliers;</li><li>Controlling work progress of materials and equipment suppliers;</li><li>Carrying out expediting visits at suppliers premises and preparing expediting reports;</li><li>Preparing supplier delivery according to contractual requirements, and after technical release has been issued;</li><li>Dealing with Logistics Coordinator relevant to EXW delivery of materials and equipment;</li><li>Dealing with and expediting Engineering Team with reference to approval of Vendor design documents;</li><li>Dealing with Procurement Dept with reference to supplier contractual delivery date changes</li></ul> Required Experience: 3 years of experience in O&G Project Execution Environment as Expediter Required knowledge, technical or professional skills: <ul><li>Development Project Management: schedule planning and control</li><li>Contracting: basic knowledge of typical contracts for packages, equipment and supplies T&C and pricing structure</li><li>Facilities: construction/offshore hook up process basic knowledge and main requirements in terms of materials availability</li><li>Quality: basic knowledge of QA/QC Construction Management Systems</li><li>Logistics: intermediate knowledge of land/marine/air transportation methodologies and means, custom clearance and warehousing and handling techniques</li><li>Good Knowledge of Microsoft MS Office Package</li></ul>

Expediter - Italy

Expediter - Germany

Expediter - France

Job Purpose: To ensure materials and equipment delivery controlling suppliers and alerting project team in case of delay Main Responsibilities: Procured materials and equipment delivery in compliance with project schedule requirements Key Activities: <ul><li>Tracking of materials and equipment suppliers;</li><li>Controlling work progress of materials and equipment suppliers;</li><li>Carrying out expediting visits at suppliers premises and preparing expediting reports;</li><li>Preparing supplier delivery according to contractual requirements, and after technical release has been issued;</li><li>Dealing with Logistics Coordinator relevant to EXW delivery of materials and equipment;</li><li>Dealing with and expediting Engineering Team with reference to approval of Vendor design documents;</li><li>Dealing with Procurement Dept with reference to supplier contractual delivery date changes</li></ul> Required Experience: 3 years of experience in O&G Project Execution Environment as Expediter Required knowledge, technical or professional skills: <ul><li>Development Project Management: schedule planning and control</li><li>Contracting: basic knowledge of typical contracts for packages, equipment and supplies T&C and pricing structure</li><li>Facilities: construction/offshore hook up process basic knowledge and main requirements in terms of materials availability</li><li>Quality: basic knowledge of QA/QC Construction Management Systems</li><li>Logistics: intermediate knowledge of land/marine/air transportation methodologies and means, custom clearance and warehousing and handling techniques</li><li>Good Knowledge of Microsoft MS Office Package</li></ul>

Expediter

Warehouse Manager Duration: 23/02/2026 to 28/02/2029 Rotation: 8:00am til 5:00pm Monday – Friday (42.5hrs /week) (and some weekend cover when required 8:00am til 4:30pm Saturday / Sunday approx 1 weekend per month) Your Role The Supply Chain Team is looking to recruit an energetic and motivated Warehouse Manager to support the day-to-day operations at our new Major Component Hub in Great Yarmouth. This facility is critical to the offshore wind business and will be responsible for the storage, maintenance, and mobilisation of large, heavy-lift components essential to offshore operations. In this varied and hands-on role, you will play a key part in establishing and running the warehouse, working closely with offshore teams, and supply chain functions. This role requires excellent organisational skills, technical understanding of heavy equipment handling, and a strong safety-first mindset. In this varied role your key responsibilities will include: • Oversee and manage all warehouse activities related to major components, tools, special tools and associated equipment. • Perform or coordinate routine minor maintenance and condition checks on stored components to ensure readiness. • Operate and oversee the use of 50 Ton mobile gantry crane and heavy-duty forklifts for the safe movement and storage of large components. • Maintain SAP MM or other inventory management systems, ensuring all stock levels, movements, and usage are accurately recorded. • Support the setup of warehouse systems and layout, including racking, component zoning, and material flow for efficient operations. • Liaise regularly with the Major Corrective Team, and the Supply Chain Manager to align warehouse operations with project needs. • Monitor tooling and equipment lifecycles, arranging calibration, inspections, and repairs as required. • Champion health, safety, and environmental compliance, ensuring all lifting operations and warehouse practices are carried out to the highest safety standards. • Coordinate and plan inbound and outbound shipments, ensuring documentation, transport, packaging, and equipment readiness. • Assist in preparing for audits, inspections, and operational readiness reviews. • Support and lead continuous improvement initiatives, including lean warehousing and process optimisation. • Provide reporting and KPIs related to inventory, downtime, logistics efficiency, and compliance. Requirements: <ul><li>5Ton & 16Ton Fork truck & 50Ton Gantry crane operator licence advantageous but not a must as training can be provided.</li><li>Fork Truck & Gantry Crane operator experience a must.</li><li>Slinger & Banksman experience a must.</li><li>Minor maintenance experiences a must.</li><li>SAP Material Management Experience a must.</li><li>Occasional weekends may be required.</li><li>3 week notice each way.</li></ul> Qualifications & Competencies: • Strong organisational skills and high level of attention to detail. • Ability to work methodically and quickly. • Excellent time management skills and exceptional work ethic. • Excellent communication skills. PPE: PPE provided

Warehouse Manager

My client is looking for a Geotechnical Engineer for an initial 3 month contract for work in London. The candidate should as default work from our office at least 3 days a week, but this can be negotiated depending on the candidate. The tasks will cover both traditional offshore site characterization work and support to jack-up activities under my clients guidelines and QA/QC: <ul><li>Review of leg penetration and spudcan-quay wall interaction analyses provided by consultants; review of leg penetration analysis and vessel suitability; High level jack-up installation assessment using in-house tools and methods.</li><li>Other potential ad-hoc tacks:<ul><li>supporting scoping, planning and operations for geotechnical site investigations and laboratory testing</li><li>analysing and interpreting large geotechnical datasets to deliver high-quality site characterisations and engineering soil/rock properties for design and installation assessments</li><li>supporting engineering assessments for jack-up installations</li><li>other tasks aligned with the competencies above and support offshore wind farm site characterisation and related engineering activities.</li></ul></li></ul> Key competencies: <ul><li>have proven experience in offshore site characterisation and analyses of in situ data and laboratory test results</li><li>have in-depth experience with planning, scoping and execution of offshore geotechnical site investigations, including operational and in situ techniques</li><li>have in-depth experience with Leg Penetration Analyses and engineering assessments applicable to jack-up installations</li><li>have proven experience with processing and validating geotechnical data, including AGS data handling and with writing Geotechnical Interpretation Reports (GIRs)</li><li>have knowledge of the geotechnical input required for foundation and cable design, installation constraints and understanding of the interfaces with different engineering teams</li><li>have a high degree of personal responsibility and accountability and capable of working with different tasks in parallel </li><li>have strong analytical, communication and stakeholder management skills and enjoy working closely with colleagues and project teams.</li><li>must be able to speak and write English fluently</li><li>much be result oriented</li></ul> For more information, do not hestitate to get in touch!

Geotechnical Engineer

Talent Acquisition Officer – Senior Start date: ASAP. Duration: 3 month contract initially, options to extend long term. Location: Hoboken/Olen, Belgium. Rotation: Monday-Friday. Type: Freelance contract. Description Department: P&O Operations Client information This client stands as a global leader in materials technology, rooted in Belgium with four local sites. We innovate and produce high-performance materials for solar cells, rechargeable batteries, and catalysts, while also recycling precious metals from electronic devices. We aim to be a clear world leader in materials for clean mobility and recycling and have turned our sustainability approach into an even greater competitive advantage. Department description and responsibilities The Talent Acquisition Specialist is responsible for identifying and attracting top talent for the organization. You’ll collaborate with the Talent Sourcing Specialists and Hiring Managers to understand the staffing needs. This role involves sourcing, recruiting, and onboarding skilled workers within various departments. Project description: We are looking for a talent acquisition officer to join the team for finding the right candidates for different departments. You'll lead the recruitment of 20-25 open vacancies. Primary Tasks and responsibilities - Work closely with hiring managers to understand specific job requirements and develop effective recruitment strategies. - Create and align job postings according to client standards. - Conduct initial screenings and interviews to assess candidates' skills, experience, and cultural fit. - Facilitate the onboarding process for new hires, ensuring a smooth transition into the company. - Build and maintain relationships with potential candidates and industry contacts to create a talent pipeline. - Track and report on recruitment metrics to evaluate the effectiveness of sourcing strategies. Technical profile requirements - 7 Years experience within Recruitment , preferably in a similar industry - Experience with recruitment of different type of profiles (Blue & white colour .) - Experience managing high volume requisitions in a fast-paced environment. - Strong understanding of labour laws and regulations related to hiring. - Knowledge of SHL tests and questionnaires is a plus (OPQ, MQ, G ) - Excellent communication and interpersonal skills. - Proficiency in Microsoft Office and ATS (SuccessFactors, …) Non-Technical profile requirements - Ability to work independently and as part of a team in a fast-paced environment. - Strong listening skills and interviewing skills Methodology/Certification requirements - Bachelor’s degree in HR, Business administration or relevant field Language proficiencies - Fluent speaking and writing English - Fluent speaking and writing Dutch - proficiency in other languages is a major plus (German and/or French) Location - min. 3days/Week onsite presence in Hoboken & Olen Office, during onboarding period fulltime Contract - start ASAP - first contract until end of the year, extension foreseen in 2026 Skills ATS (SAP HCM, ERP) - 7 Years Experience as recruiter for corporate profiles - 7 Years Experience as recruiter for technical profiles - 7 Years

Talent Acquisition Officer

A global engineering consultancy specialising in complex power system challenges, dedicated to providing high-quality solutions for the energy transition. Our multidisciplinary team of experts offers strategic, technical, and regulatory advice across all fields related to power transmission, as well as specialist solutions to a diverse international client base in the power sector. Your function We wish to reinforce our team working on Power System Operations and Security in the context of deep integration of renewable energy sources and Energy/Balancing Market Integration. To achieve this, we are looking for experienced professionals with expertise in transmission system operation. These experts will participate in local and international projects focusing on RES integration, security of supply, sustainability and economic efficiency of Power Systems. Typical activities involve (but are not limited to):
<ul>
<li>Analysis and definition of operational principles;</li>
<li>Model definition and validation;</li>
<li>Steady-state analysis (load flow, short circuit calculations, etc.);</li>
<li>Dynamic stability analysis (frequency, voltage stability, etc.);</li>
<li>Grid Code requirement and connection compliance studies;</li>
<li>Support the analysis and evaluation of grid reliability and security (e.g., capacity calculation, balancing, operational planning);</li>
<li>Support business development teams in identifying and pursuing opportunities by establishing trusted relationships with clients and developing proposals.</li>
</ul>
 Your profile 
<ul>
<li>Master's degree in Engineering or Applied Mathematics/Physics;</li>
<li>10 years of experience in Power System Operations and Security (balancing and RES system integration, system operation and state-of-the-art technological solutions);</li>
<li>Expertise in translating complex data into key strategic insights and valuable actions;</li>
<li>Knowledge of power system simulation tools (PowerFactory, PSSE);</li>
<li>Fluent in English;</li>
<li>Additional language skills are considered a strong asset.</li>
</ul>
 For more information, do not hesitate to get in touch!

Senior Power System Expert

Project Engineer &ndash; HVAC / Mechanical Location: Site Sector: Safety‑Critical Infrastructure We&rsquo;re seeking a skilled Project Engineer to support the delivery of HVAC and specialist mechanical engineering projects within safety‑critical environments. You&rsquo;ll ensure work is delivered safely, on time, and to the correct technical standards.&nbsp; Key Responsibilities
<ul>
<li>Plan and coordinate project activities, schedules and milestones</li>
<li>Provide technical oversight on HVAC designs, drawings and equipment selections</li>
<li>Supervise site installation, testing and commissioning</li>
<li>Maintain project documentation and support cost control</li>
<li>Liaise with clients, suppliers and project teams to resolve technical issues and ensure project expectations are met&nbsp;</li>
</ul>
Requirements
<ul>
<li>HNC/HND or higher in Mechanical Engineering / Building Services</li>
<li>Strong knowledge of HVAC system design, standards (e.g. DW144) and packaged plant room fabrication</li>
<li>Experience across full project lifecycle, including design reviews and site execution</li>
<li>Commercial awareness and strong communication skills</li>
<li>Experience in nuclear or safety‑critical environments is desirable&nbsp;</li>
</ul>

Project Engineer - HVAC

Project Manager – HVAC / MEP Location: Office / Site Sector: Safety‑Critical Infrastructure We’re seeking an experienced Project Manager to lead the delivery of complex HVAC and specialist ventilation projects within safety‑critical environments. You’ll take full ownership of scope, programme, quality, cost and client management, overseeing projects from tender through to on‑site delivery.  Key Responsibilities<ul><li>Manage multidisciplinary teams across engineering, commercial, procurement, construction & commissioning</li><li>Ensure high standards of Health & Safety, quality and regulatory compliance</li><li>Control programme performance, reporting, risk, and project milestones</li><li>Oversee subcontractors, procurement and commercial processes (payments, variations, change control)</li><li>Build strong client and stakeholder relationships and represent the project in senior meetings</li></ul>Requirements<ul><li>Proven experience delivering HVAC/MEP projects</li><li>Strong understanding of HVAC, pipework & electrical installations</li><li>Experience managing subcontractors and fast‑paced programmes</li><li>Knowledge of NEC contracts (preferred)</li><li>SMSTS/IOSH or similar safety qualification</li><li>Strong communication and leadership skills </li></ul>

HVAC Project Manager

A leading global engineering consultancy is seeking an experienced Senior Power System Expert to support complex power‑system challenges across international markets. The organisation specialises in energy transition, system operation, renewable integration, and advanced transmission technologies. With offices across Europe, the Middle East, Asia, and North America, the company delivers strategic and technical expertise to utilities, system operators, regulators, and energy investors worldwide. The Role As part of a growing Power System Operations & Security team, you will contribute to high‑impact projects involving the deep integration of renewables, balancing market evolution, system stability, and operational security. You will act as a senior technical expert across multiple international assignments. Key Responsibilities<ul><li>Define and analyse operational principles for transmission systems</li><li>Develop and validate power‑system models</li><li>Perform steady‑state studies (load flow, short‑circuit analysis, etc.)</li><li>Conduct dynamic stability studies (frequency stability, voltage stability, converter‑interactions, etc.)</li><li>Carry out grid‑code compliance assessments</li><li>Support reliability, adequacy, and security‑of‑supply evaluations</li><li>Contribute to proposals and client engagement, supporting business‑development teams</li><li>Provide senior‑level insight on renewable integration, system operations, and energy‑market dynamics</li></ul> Candidate Profile<ul><li>Master’s degree in Electrical Engineering, Power Systems, Applied Mathematics, or Physics</li><li>10 years’ experience in power‑system operations, stability, balancing, or renewable integration</li><li>Strong capability in converting complex technical data into actionable insights</li><li>Expertise with power‑system simulation tools (e.g., PowerFactory, PSS/E)</li><li>Fluent in French and English; additional European languages are advantageous</li><li>Strong communication skills and the ability to engage with clients at senior level</li></ul>

Document Controller 16/02/2026 to 15/02/2027 Outside IR35 Monday-Friday, 8 hours a day Description: The role is responsible for the processing, quality checking, tracking and reporting for Offshore project documentation. The role is critical to the efficient and effective running of the project. Another main responsibility is the provision and receipt of data and communications to/from contractors and for the reporting of progress to project managers. The job holder will be responsible for supporting the document management function that has direct influence on project budget, time and quality requirements in order that the key shareholders and stakeholders expectations are met. Principal Accountabilities • To work within the Document Management function for Offshore projects • Assist Project Managers & Teams to support document workflow requirements and methods • To execute the function task of ensuring traceability for all documentation during all phases of the project, including handover and operations • To be complicit in the implementation and continual adherence of the company’s document control procedures and processes • Ensure accuracy in storage and ease of retrieval of all project documentation • To support the document control manager in the development of routines and implementation of improvements for all technical and administrative documentation • Execute document management verifications towards contractors • To support all project members with adequate information, training and assistance regarding DM routines and applications • Monitor incoming documents and drawings, and distribute as appropriate in accordance to a project distribution matrix • Ensure closure of all document management processes at project end, including the expediting of close out reports, giving an overview of all documentation produced in the project • The coordination of data-sets to be migrated to the EDMS on a project Knowledge and Skills: Essential: • Relevant experience in a document controller role (3 to 5 years) • A good understanding of document management processes and practices • Previous experience working in large multidiscipline engineering projects within a document control function • Experience of document management EDMS systems, utilised within a project team • Strong general computing skills especially MS office, including Outlook; Word; Excel; PowerPoint and Access & MS SharePoint • Competent, responsible and innovative • Systematic, proactive and service minded • Team player and motivated • Proven experience working under pressure and meeting deadlines • Strong communication, report writing and presentation skills • Enthusiastic about learning and pushing technical limits and finding new solutions • Capable of maintaining positive working relationships while adhering to demanding deadlines • Track record of adhering to document management procedures • Excellent attention to detail • Ability to work across differing projects and work streams simultaneously  Desirable: • Qualification in document management • Comfortable in the execution of training for the use of EDMS systems • Experience of the renewables sector within a document management function • Knowledge of engineering and construction documentation lifecycles and workflows

Document Controller

SITE MANAGER – Germany IMPORTANT INFO<ul><li>SITE: WILSTER CONSTRUCTION SITE</li><li>Site presence required 5 days a week</li><li>The role may require Saturday / weekend work as needed (this would be scheduled in accordance with working hours)</li><li>German English full fluency mandatory</li><li>Valid driving licence required</li><li>We will consider candidates outside of the location and will evaluate the possibility to expense travel/accommodation costs if needed - this will be evaluated on a case-by-case basis and is dependent on budget approval</li></ul>JOB DESCRIPTION The Senior Site Manager is responsible for the successful execution of all activities on the assigned construction site, on time, within budget, as per Contractual Scope and requirements, maintaining the highest standard of quality of the works, ensuring an incident-free construction site and complete adherence by all personnel to the Health, Safety and Environment (HSE) plans and regulations. TASKS<ul><li>You act as the main interface to the Customer on all contractual matters and maintain a good relationship with local authorities and organisations.</li><li>You manage workforce requirements on site and drive the site activities to achieve the contractual milestones and targets.</li><li>You ensure that all personnel on site are well informed about the Scope of Work (SoW) and Division of Work (DoW).</li><li>You manage Change Management on site, including variation orders to subcontractors.</li><li>You guarantee that all tests are performed and accepted by the customer in accordance with the contractual conditions.</li><li>You foster a culture of proper understanding and adherence to the Health, Safety, and Environment requirements of the business, the Customer, and local authorities by all site personnel.</li><li>You ensure that all activities are done with the expected quality and that all quality records are created and properly archived.</li><li>You ensure that all permits, licenses, and requirements are in place for a compliant execution of the site activities.</li><li>You ensure a structured, up-to-date, and reliable documentation handling on site and towards the Headquarters.</li><li>You guarantee that all activities are performed within the defined contractual schedules and milestones, understand the project budget and ensure that costs for the site activities are maintained within budget.</li><li>You ensure that contractual obligations are met and to the satisfaction of our customers.</li><li>You are assigned as Senior Site Manager in large EPC converter station projects and complex Consortium projects.</li></ul>REQUIREMENTS<ul><li>Bachelor’s degree in mechanical, electrical, or civil engineering.</li><li>Experience (minimum 6 years) working as a Site Manager or a Senior Site Manager on construction sites in the energy sector or similar industries, particularly in large size projects.</li><li>Fluent in German and English, written and spoken (Minimum B2 to C1)</li><li>Sound commercial awareness, contracts management experience and business acumen.</li><li>Experience in Civil Works, Installation, and/or Commissioning.</li><li>Relevant and Certified knowledge and experience in the field of HSE.</li><li>Very structured and organised, good people skills, collaboration and team working spirit, resilient, excellent customer interface and communication skills.</li><li>Valid driving licence required</li></ul>

Site manager-Baustellenleiter

My client is looking for 2 Lead Planning Engineers for two different locations. Location: • Biblis Nuclear Site – approx. 30 person team – x1 Consultant • Lingen Nuclear Site – approx. 20–25 person team – x1 Consultant Monday - Friday, 8 hour days These roles support nuclear projects by providing planning and engineering expertise in Control & Instrumentation (C&I) and Electrical Engineering. The sub-project managers manage the sub-projects tailored to technical aspects and are responsible for the completeness, consistency and correctness of the engineering planning in the sub-projects. They are also responsible for meeting deadlines and planning budgets. In this project, TPL combines the technical project functions (in particular specialist project management), order management, quality management and (preparatory work for) scheduling. Responsibilities include (Generic across both sites) Engineering & Technical <ul><li>Planning and engineering within C&I and Electrical disciplines</li><li>Getting familiar with client's nuclear systems, standards, and project structures</li><li>Working closely with site teams to deliver project milestones Project Integration</li><li>Daily interaction with C&I and electrical colleagues</li><li>Rapid onboarding into nuclear project environments</li><li>Contributing within large multi-disciplinary engineering teams Technical</li></ul> Skills Mandatory: <ul><li>Strong background in Control & Instrumentation (C&I) OR Electrical Engineering</li><li>Experience in industrial or nuclear project environments preferred Soft Skills</li><li>Ability to integrate quickly into large project teams</li><li>Willingness to be on site and work embedded in operations Language Requirements German fluency is essential</li><li>All documentation is in German</li><li>Candidates without strong German skills will struggle to perform the job Work Conditions On-site Work</li></ul> For more information, do not hesitate to get in touch!

Lead Planning Engineer

Lead Engineer, Planning – x2 Duration: 01/03/2026 to 30/06/2027 Type: Freelance Rotations: Monday-Friday, 8 hours a day Description: These roles support nuclear projects by providing planning and engineering expertise in Control & Instrumentation (C&I) and Electrical Engineering. Two positions: one for Biblis Nuclear Site, one for Lingen Nuclear Site Candidates will work predominantly on-site to integrate into active project teams. The sub-project managers manage the sub-projects tailored to technical aspects and are responsible for the completeness, consistency and correctness of the engineering planning in the sub-projects. They are also responsible for meeting deadlines and planning budgets. In this project, TPL combines the technical project functions (in particular specialist project management), order management, quality management and (preparatory work for) scheduling. Responsibilities include (Generic across both sites) Engineering & Technical • Planning and engineering within C&I and Electrical disciplines • Getting familiar with the client nuclear systems, standards, and project structures • Working closely with site teams to deliver project milestones Project Integration • Daily interaction with C&I and electrical colleagues • Rapid onboarding into nuclear project environments • Contributing within large multi-disciplinary engineering teams Technical Skills Mandatory: • Strong background in Control & Instrumentation (C&I) OR Electrical Engineering • Experience in industrial or nuclear project environments preferred Soft Skills • Ability to integrate quickly into large project teams • Willingness to be on site and work embedded in operations Language Requirements German fluency is essential • All documentation is in German • Candidates without strong German skills will struggle to perform the job Work Conditions On-site Work • Role is primarily on-site • Occasional home office is possible, but not the norm • On-site presence is critical to learning nuclear systems and integrating into the team PPE • Provided by client (contractor does not need to supply their own) Start Date • Despite original documentation stating February, realistic start date is 1 March • Earlier dates are not feasible In detail, the tasks of the TPL include: - Drafting and adherence to partial budgets for all components, systems and services and monitoring deadlines in service provision - Continuous updating of cost estimates and forecasts (deliveries and services as well as own engineering services) - Identification and defence of technical and economic risks - Technical coordination and interface management (also for operational operations), monitoring and control of the overall planner and suppliers - Ensuring a quality-assured and timely throughput of the VPU, the MEK and FAP test programs, etc. - Maintenance of the so-called measures folder and ensuring a quality-assured and timely submission of the project documentation (including the final documentation) - Definition and implementation of quality requirements in the project - Compliance with all licensing regulations - Compliance with all technical standards of BGZ and client Nuclear GmbH - Consideration of location requirements - Development of sub-project presentations with site specifics - Reporting to the overall project management - Provision of appointments and information to the PS (appointments) for the creation and updating of the schedules - Ensuring valid certificates and approvals of the employees employed in the sub-projects TPL's main tasks and responsibilities in contract management are: - Participation and review of the technical concept and specification of the supplies and services (LuL) - Preparation/adherence to partial budgets and milestones for the LuL - Participation and review in the preparation of tender documents as well as bid review and preparation - Allocation recommendation for LuL (especially from a technical point of view) - Direct (technical) contact for the companies commissioned with LuL - Elaboration of specific quality requirements and ensuring compliance with them in planning, construction and assembly - Document review, in particular examination of the preliminary test documents (VPU) to be submitted by the suppliers, the test programs for MEK, FAP, individual and complete system IBN, etc. as well as the final documentation - Creation and maintenance of the so-called catalogue of measures for the relevant lots - Ensuring the contribution of all relevant or existing technical knowledge to the project work - Checking the accuracy and completeness of instruction and training documents - Moderation of briefings and training courses Short description (bullet points) of requested tasks: • Lead Engineer C&I and Electrical for dedicated lots (see attached job profile documents) • Services in accordance with supplementary sheets

WTG Fabrication Supervisor Gdansk, Poland 06/2026 – 06/2027 Monday – Friday Role: Monitor Quality and progress during the manufacturing of Wind Turbine Towers at Supplier site in Poland and checking NCRs rectification or retrofits works at preassembly site. Responsibilities: · Witness the Supplier works. · Witness the supplier's inspection and test activities · Follow-up on manufacturing progress · Report non-conformities and observations Tasks: · Participate in final inspections and final walkdowns · Monitor production activities and production documentation as spot checks · Monitor product quality and participate in FAI/FAT activities · Report non-conformities detected during inspection and test and manufacturing · Report relevant quality issues in client NCR system (i.e. Synergi) · Follow-up on preservation and maintenance of components at supplier's storage area · Follow-up on manufacturing progress according to agreed project manufacturing schedule · Keep track of trend concerning repeated non-conformities and manufacturing errors and follow-up with the supplier concerning corrective and preventive actions · Documentation of daily work and inspections to WTG Fabrication & Quality Manager · Prioritise participation in inspection/Process monitoring and test activities for different components according to failure trends and criticality of failures · Review quality related as-built documentation · Highlight relevant HSE related issues Deliverables: · Inspection and manufacturing reports · Non-conformity (Synergi) reports Working Schedule: · 8 hours/day · 5 days per week · Work on night shift is not planned, but might become relevant as an exception Additional Comments: · Consultant should preferably live close to the manufacturing site · Work on weekend is not planned, but might become relevant as an exception · Travel activities and inspections at other tower manufacturing sites in Europe might become relevant as an exception · Access and work restrictions, e.g., due to HSE requirements, may exceptionally be applied by the supplier at their site, limiting chargeable workdays Qualifications: · Mandatory technical education and knowledge in mechanical field (e.g. welding of steel structures, bolt assembly, non-destructive testing and measurements of components) · Recommended technical education and knowledge in electrical field (low voltage assembly and testing) · Recommended technical education and knowledge in metallizing and painting of steel structures · Recommended 3 years of work experience within wind- and/or manufacturing industry · Recommended 1 year of experience from similar position · Good knowledge of Microsoft Office programmes and smart phone applications for digital inspections · Safety trainings (optional: e.g. GWO trainings) Language: Fluent English and Polish skills in writing and speaking Soft Skills: · Adaptable, works well in teams, strong communication abilities, · Capable of establishing trustful relationship · Proactive · Self-driven · Hands on experience · Polite and calm by nature · Cooperative · Safety conscious · Quality conscious

WTG Fabrication Supervisor

Offshore Works Coordinator - OSS Period - 23/03/2026 to 30/08/2026 Location - Role will be based offshore at the NSC-A Windfarm OSS. Base Port will be Eemshaven or Emden (Heliport) Rotations – 2 weeks on, 2 weeks off Description: JOB DESCRIPTION The main task of the Works coordinator is to be the SPOC for logistic planning and crew changes handled from Offshore • Collect demand of Contractors and align with the onshore logistics team and MCC • Support for manifesting between OSS and JUB. • Ensure that all requirements for cargo movement are fulfilled (lifting plans in place, correct marking, supervision) The Works coordinator shall work closely with the Offshore Construction Manager and support / deputise him where necessary for • Attend daily meetings, toolbox talks and other discussions as well as package/project meetings. Aligning and escalating topics (as necessary) to the Offshore Site Management. • Ensure that specific tasks are completed safely, on time, and with due consideration and attention to the project requirements (RAMS) for the assigned scope of work. • Review and understand the Project’s HSE Plan, including the Emergency Response Plan, and ensure Contractor adheres to the HSE requirements; • Review health and safety documents as required before the execution phase commences and keep updated on changes in the documents; • Prepare and distribute Daily Progress Reports (DPR) which will include progress of the works, mechanical breakdown, weather downtime etc. and ensure the DPRs are signed by all required parties (as appropriate); • Support the prioritisation and coordination of works, including coordination of required resources and communicate requirements to the Offshore Site Management Team. • Ensure Contractor compliance with technical/operational requirements and that works are executed in a safe manner and to the required quality; • Monitor Safety Observations Cards (SOCs) during daily meetings and ensure they are recorded within the DPR. Highlight any of particular note or concern toward Offshore Site Management and HSE team. • During all defined key activities and otherwise as often as practicable be present as a witness during installation. • Where the HSE Team is unable to attend any asset, vessel or location carry out planned HS&E inspection(s) on their behalf. • Participate in safety walks with health and safety representatives from the Project Company and Contractor. Identify and report any safety-related observations on a day to day basis whilst performing primary duties. • In the event of incident / accident take detailed notes, timeline, pictures and generally gather information to support investigation(s). NOTE – The Contractor will almost always lead on investigation but it is helpful for Project Company to have its own information available. • Where necessary, act on behalf of the Packages Quality Manager and participate in walkdowns, progress monitoring, identification of non-conformance and witnessing in accordance with project Quality Management Plan and Contractor ITPs. CERTIFICATIONS • GWO Training: o Sea Survival, o Working at heights, o First Aid, o Fire Awareness, o Manual Handling. • Current valid medical certificate and exams for offshore work according to legal requirements. • IT proficient (Microsoft Word, Excel and Internet) • Optional: Experience in drafting DPRs • Experience using inspection/auditing software in a construction environment (desirable). SKILLSET / EXPERIENCE The Client Representative offshore shall have • a minimum of 5-years experience of similar services in offshore renewable industry; • working knowledge of offshore construction contracts with a good understanding of the contractual implications of breakdowns, delays, weather downtime etc. • profound understanding of offshore operations, in particular offshore lifting operations, offshore substation installation & commissioning works, DP2 and/or jack-up vessel operations • the ability to read and understand technical documents and observe (offshore) operations and ensure these are carried out according to the contractual requirements (e.g. understanding of reasonable endeavours clauses) • knowledge about industry standards and regulations, including but limited to International Maritime Organization (IMO) & IMCA guidelines; • excellent communication skills, able to communicate effectively with others (shall be fluent in spoken and written English)

Offshore Site Coordinator

RWE – Cable Installation Engineer   Period - 15/02/2026 to 28/02/2027 Rotations – Monday-Friday, 8 hour days Type – Freelance contract outside IR35 Rate - £760 a day   Location: London or Swindon   Description: Development and coordination of Cable logistic- and installation concepts according to schedule during planning and construction until operation <ul><li>Collection of requirements, definition of scope, planning of time schedule and cost estimation</li><li>Support of the project-specific Risk- and Quality- Planning</li></ul>  RESPONSIBILITIES <ul><li>Responsible to lead the technical definition, evaluation, planning, reporting and</li><li>interfacing of the transport and installation activities for the cables (inter array or export cables). Including load out operations, transportation and installation of components, including handover(s), all in compliance with industry and company standards, and Health, Safety and Environment regulations and guidelines.</li><li>Responsible to write, negotiate and execute technical chapters of the installation tender and contract and of other related transport and installation contracts</li><li>Installation Engineering – Confirming method statements, risk assessments, lift plans, safety procedures, permits to work and related documents for all loading, transportation and offshore work is in place and accepted by all relevant parties</li></ul>  TASKS <ul><li>Drive HSE performance through design and implementation to eliminate or reduce risks during construction, operation and maintenance</li><li>Report and investigate all related near misses and incidents.</li><li>Determine required and installation vessels for the cable offshore installation</li><li>Provide subsea cable input into the other project packages during the design phase and define the working interfaces with them</li><li>Prepare and execute relevant documents for the cable installation ITT Technical evaluation Transportation and Installation proposals</li><li>during tender stage</li><li>Assess the technical aspects of tenders</li><li>Advise on the contract technical requirements,</li><li>Write the technical specifications,</li><li>Perform or oversee engineering calculations</li><li>Review method statements and risk assessments and produce comments sheets.</li><li>Assist the Engineering Manager with tasks associated with ensuring a safe design</li><li>Coordinate within the project of assignment, as well as across-projects (with similar roles in other projects) to ensure delivery as per objectives and company standards (including but not limited to).</li><li>Provide input to the risk and programme analysis.</li><li>Follow up the preparation for execution activities and required interfaces, and support on technical aspects of the transportation and installation.</li><li>Closely Coordinate and communicate with the Principal Contractor and Site Management teams, the Marine Warranty Surveyor, the Employers Inspectors and Engineers and the Contractor’s Offshore Installation Representatives.</li><li>Respond to technical queries or interface with other packages/Contractors to resolve queries</li><li>Ensure offshore works procedures are being carried out in accordance with the Employers Requirements and best industry practice.</li><li>Support the Contract manager in the preparation of variation orders and claims</li><li>Compile the As Built documentation</li></ul>  DELIVERABLES: <ul><li>Installation timeline</li><li>Installation contractor</li><li>UXO Boulder Clearance Campaign for cable routes</li><li>Interface Matrix</li><li>Knowledge Transfer</li><li>Safe installation within the given time and budget</li></ul>  QUALIFICATIONS <ul><li>Engineering background with strong knowledge in submarine cable design, cable fabrication, layout and design of offshore cable decks, cable pull-in operations, seabed assessment and preparation, offshore cable laying and cable protection, and termination and HV testing procedures</li><li>Significant experience in the offshore wind industry (5 years) Significant and in-depth experience in Project Management of offshore submarine cables in either the Offshore Wind Energy industry, Submarine Telecommunications or Oil & Gas</li></ul>

Cable Installation Engineer

Site Planner – Power Plant Projects EarthStream Global are urgently seeking an experienced Site Planner to support the delivery of complex power plant construction projects. This role is ideal for someone who thrives in a fast‑paced environment, understands the unique challenges of large‑scale energy projects, and brings strong technical and commercial awareness to the table. Key Responsibilities<ul><li>Develop, maintain, and optimise detailed project schedules using Primavera P6, ensuring alignment with project milestones, engineering deliverables, procurement activities, and construction sequences.</li><li>Work closely with project managers, engineering teams, construction leads, and subcontractors to gather progress data and update schedules accurately.</li><li>Analyse schedule performance, identify risks, and propose mitigation strategies to maintain project timelines.</li><li>Produce weekly and monthly planning reports, including progress curves, look‑ahead schedules, critical path analysis, and variance reports.</li><li>Support site teams with short‑term planning, resource forecasting, and productivity tracking.</li><li>Integrate cost and schedule data to support cost control, forecasting, and earned value management.</li><li>Collaborate with the commercial and finance teams to monitor budget performance, identify cost deviations, and support corrective action planning.</li><li>Ensure planning and cost‑control processes comply with project governance, contractual requirements, and industry best practices.</li><li>Participate in site coordination meetings and contribute to decision‑making with clear, data‑driven insights.</li></ul>Required Experience & Qualifications<ul><li>Proven experience as a Site Planner or Project Planner on power plants</li><li>Advanced proficiency in Primavera P6</li><li>Strong understanding of cost control principles, including budgeting, forecasting, and earned value analysis.</li><li>Solid knowledge of construction methodologies, sequencing, and site operations within power generation environments.</li><li>Ability to interpret engineering drawings, construction plans, and technical documentation.</li><li>Excellent analytical skills with the ability to translate complex data into clear, actionable insights.</li><li>Strong communication and stakeholder‑management skills, with the confidence to challenge assumptions and influence decisions.</li><li>Relevant degree or technical qualification in engineering, construction management, or a related field (preferred).</li></ul>

Site Planner - Power Plant

Site Planner – Power Plant Projects EarthStream Global are urgently seeking an experienced Site Planner to support the delivery of complex power plant construction projects. This role is ideal for someone who thrives in a fast‑paced environment, understands the unique challenges of large‑scale energy projects, and brings strong technical and commercial awareness to the table. Key Responsibilities<ul><li>Develop, maintain, and optimise detailed project schedules using Primavera P6, ensuring alignment with project milestones, engineering deliverables, procurement activities, and construction sequences.</li><li>Work closely with project managers, engineering teams, construction leads, and subcontractors to gather progress data and update schedules accurately.</li><li>Analyse schedule performance, identify risks, and propose mitigation strategies to maintain project timelines.</li><li>Produce weekly and monthly planning reports, including progress curves, look‑ahead schedules, critical path analysis, and variance reports.</li><li>Support site teams with short‑term planning, resource forecasting, and productivity tracking.</li><li>Integrate cost and schedule data to support cost control, forecasting, and earned value management.</li><li>Collaborate with the commercial and finance teams to monitor budget performance, identify cost deviations, and support corrective action planning.</li><li>Ensure planning and cost‑control processes comply with project governance, contractual requirements, and industry best practices.</li><li>Participate in site coordination meetings and contribute to decision‑making with clear, data‑driven insights.</li></ul>Required Experience & Qualifications<ul><li>Proven experience as a Site Planner or Project Planner on power plants</li><li>Advanced proficiency in Primavera P6</li><li>Strong understanding of cost control principles, including budgeting, forecasting, and earned value analysis.</li><li>Solid knowledge of construction methodologies, sequencing, and site operations within power generation environments.</li><li>Ability to interpret engineering drawings, construction plans, and technical documentation.</li><li>Excellent analytical skills with the ability to translate complex data into clear, actionable insights.</li><li>Strong communication and stakeholder‑management skills, with the confidence to challenge assumptions and influence decisions.</li><li>Relevant degree or technical qualification in engineering, construction management, or a related field (preferred).</li></ul>

We are seeking an experienced Lead Engineer – Drive System Specialist to take ownership of engineering activities across complex projects.  Key Responsibilities<ul><li>Lead and manage engineering activities across projects, ensuring compliance with client expectations, legal requirements, and industry standards.</li><li>Take full ownership of the Functional Safety lifecycle within projects.</li><li>Supervise, guide, and motivate teams of engineers, including external contractors, ensuring high-quality deliverables.</li><li>Mentor apprentices, trainees, junior, and graduate engineers to foster professional development.</li><li>Collaborate closely with Project Managers to deliver projects on time and within budget, proactively identifying and mitigating technical risks.</li><li>Participate in the Engineering Management Working Group, contributing to the development of internal standards and continuous improvement initiatives.</li><li>Develop electrical and controls concept designs, including Functional Design Specifications, Safety Requirements Specifications, Single Line Diagrams, Network Topologies, Device Layouts, Cause & Effect Matrices, and Safety Block Diagrams.</li><li>Produce software design specifications and develop software/configuration deliverables for PLCs, HMI, SCADA, robots, drives, BMS, and related systems.</li><li>Lead Factory Acceptance Testing (FAT), Commissioning, and Site Acceptance Testing (SAT).</li><li>Maintain and own the Technical Construction File.</li><li>Undertake other duties as required to support project and business objectives.</li></ul>

Electrical Installation & Commissioning Supervisor 02/2026 – 03/2027 Location: Norfolk The consultant will be part of a project team where trust, integrity and accountability play a fundamental role in the collaboration it takes to execute a project successfully. You will engage with internal and external stakeholders, aligning with your team leader and coordinating site activities between various suppliers. Main Responsibilities: <ul><li>Collaborate amongst the electrical installation and commissioning supervisors to establish a high degree of trust.</li><li>Proactively establish and maintain good professional relationship with all stakeholders, especially main contractor’s staff and workers, and internal stakeholders.</li><li>Facilitate day-to-day collaboration on site between contractors and internal stakeholders, and efficient installation and electrical outfitting, test, and commissioning.</li><li>Ensure quality in relation to workmanship during electrical Installation.</li><li>Be present in day-to-day planning and supervision, participating in toolbox talks, site coordination meetings, installation work, and test & commissioning activities.</li><li>Ensure that commissioning within the defined technical area(s) is executed safely in accordance with industry standards and national legislation.</li><li>Ensure that test and commissioning are properly coordinated and documented, in accordance with processes, using only accepted procedures.</li><li>Supervise and proactively support that the work is carried out in compliance with the project HSE rules and local legislation.</li><li>Align with and report to the Electrical Installation and Commissioning Manager. Responsible to follow up on contractors' deliverables within agreed scopes.</li></ul> Main Tasks: <ul><li>Perform day-to-day supervision and QA/QC during the Contractors electrical installation of HV Primary and Secondary systems.</li><li>SAT witnessing of HV Primary and Secondary systems.</li><li>Installation and commissioning progress reporting.</li><li>Carry out comprehensive documentation review of completed test documentation and electrical schematic drawings.</li><li>Facilitate Planning, co-ordination, and participation in Contractors SIT activities, ensuring all relevant test protocols are being followed and that all applicable safety systems and procedures are being adhered to.</li><li>Recording quality observations (punches) and highlight potential NCRs.</li><li>Supervise Contractor Pre-energisation activities.</li><li>Supervise Contractor Post-energisation checks, on-load tests, and verification of the stability of the protection systems.</li><li>All work is on site in the contract specified city with potential for an occasional business trip to factory acceptance test. All costs for transport, accommodation, and food to/from and in the contract specified city lies with the consultant. In case of business trip to anywhere other than the contract specified city, flights, accommodation, and food is covered by client.</li></ul> All safety training (L-AUS, GWO, HUET with CA-EBS, medical UKOG Chester step test) lies with the consultant. Mainly for offshore related contract and may be required under certain conditions for onshore related contracts. Requirements: <ul><li>The candidates must have 10 years hands-on experience with the installation and commissioning of up to 400kV Primary and associated Secondary electrical equipment on onshore substations.</li><li>Low voltage systems experience: Commissioning of low voltage electrical distribution systems, both AC and DC associated with Primary and Secondary systems,</li><li>Have a completed degree or vocational training within electrical engineering.</li><li>Speak, read, and write English at advanced level.</li><li>Excel at establishing and maintaining good collaboration through acknowledging communication with stakeholders.</li></ul>

Electrical Instrumentation & Commissioning Supervisor

The consultant will be part of a project team where trust, integrity and accountability play a fundamental role in the collaboration it takes to execute a project successfully. You will engage with internal and external stakeholders, aligning with your team leader and coordinating site activities between various suppliers.   Main Responsibilities: <ul><li>Collaborate amongst the electrical installation and commissioning supervisors to establish a high degree of trust.</li><li>Proactively establish and maintain good professional relationship with all stakeholders, especially main contractor’s staff and workers, and internal stakeholders.</li><li>Facilitate day-to-day collaboration on site between contractors and internal stakeholders, and efficient installation and electrical outfitting, test, and commissioning.</li><li>Ensure quality in relation to workmanship during electrical Installation.</li><li>Be present in day-to-day planning and supervision, participating in toolbox talks, site coordination meetings, installation work, and test & commissioning activities.</li><li>Ensure that commissioning within the defined technical area(s) is executed safely in accordance with industry standards and national legislation.</li><li>Ensure that test and commissioning are properly coordinated and documented, in accordance with processes, using only accepted procedures.</li><li>Supervise and proactively support that the work is carried out in compliance with the project HSE rules and local legislation.</li><li>Align with and report to the Electrical Installation and Commissioning Manager. Responsible to follow up on contractors' deliverables within agreed scopes.</li></ul>  Main Tasks: <ul><li>Perform day-to-day supervision and QA/QC during the Contractors electrical installation of HV Primary and Secondary systems.</li><li>SAT witnessing of HV Primary and Secondary systems.</li><li>Installation and commissioning progress reporting.</li><li>Carry out comprehensive documentation review of completed test documentation and electrical schematic drawings.</li><li>Facilitate Planning, co-ordination, and participation in Contractors SIT activities, ensuring all relevant test protocols are being followed and that all applicable safety systems and procedures are being adhered to.</li><li>Recording quality observations (punches) and highlight potential NCRs.</li><li>Supervise Contractor Pre-energisation activities.</li><li>Supervise Contractor Post-energisation checks, on-load tests, and verification of the stability of the protection systems.</li><li>All work is on site in the contract specified city with potential for an occasional business trip to factory acceptance test. All costs for transport, accommodation, and food to/from and in the contract specified city lies with the consultant. In case of business trip to anywhere other than the contract specified city, flights, accommodation, and food is covered by Ørsted.</li></ul>    All safety training (L-AUS, GWO, HUET with CA-EBS, medical UKOG Chester step test) lies with the consultant. Mainly for offshore related contract and may be required under certain conditions for onshore related contracts.   Requirements: <ul><li>The candidates must have 10 years’ hands-on experience with the installation and commissioning of up to 400kV Primary and associated Secondary electrical equipment on onshore substations.</li><li>Low voltage systems experience: Commissioning of low voltage electrical distribution systems, both AC and DC associated with Primary and Secondary systems,</li><li>Have a completed degree or vocational training within electrical engineering.</li><li>Speak, read, and write English at advanced level.</li><li>Excel at establishing and maintaining good collaboration through acknowledging communication with stakeholders.</li></ul>  For more information, do not hestiate to get in touch!

Electrical Installation and Commissioning Supervisor

Senior Hydrographer 05/2026 – 10/2026 2 days a week in Swindon would be preferred, can be remote Provision of hydrographic services to project as required. To include: · Technical support to projects as required as part of technical team · Support to the package manager on unspecified technical tasks · Review of reports, data and documents · Support across packages during consent application · Support during survey planning, tender negotiations, and execution · Support to projects during construction works. Working knowledge of CARIS, ArcMap/ArcPRO, QGIS and other relevant software necessary. Relevant degree course in geoscience or surveying and at least 10 years suitable sufficient experience in a similar role.

Senior Hydrographer

Senior Hydrographer 05/2026 – 10/2026 2 days a week in Swindon would be preferred, can be remote   Provision of hydrographic services to project as required. To include: <ul><li>Technical support to projects as required as part of technical team</li><li>Support to the package manager on unspecified technical tasks</li><li>Review of reports, data and documents</li><li>Support across packages during consent application</li><li>Support during survey planning, tender negotiations, and execution</li><li>Support to projects during construction works.</li></ul>  Working knowledge of CARIS, ArcMap/ArcPRO, QGIS and other relevant software necessary.   Relevant degree course in geoscience or surveying and at least 10 years suitable sufficient experience in a similar role. If interested, do not hestiate to get in touch!

My client is a large renewable energy provider, working all across Europe. They are looking for a site manager/client representative for an initial 10 month contract to work in Essen, Germany. Responsibilities: <ul><li>Be client representative on the construction site vis-à-vis the general contractor, the neighbouring nuclear site and, if applicable, authorities.</li><li>Management of and contact person for the general contractor and client's suppliers</li><li>Coordination, management, instruction, supervision, and support of client's component suppliers at and on the construction site.</li><li>Interface coordination with the neighboring power plant and engineering colleagues in Essen and Dresden</li><li>Responsibility for the construction and commissioning of the construction site in the role of client</li><li>Responsibility for health, safety, and the environment on the construction site in the role and on behalf of the client</li><li>Monitoring the work of component suppliers and general contractor</li><li>Coordinating and monitoring the commissioning of components provided by client (battery containers, converters, MV and HV transformers) by the relevant suppliers together with the general contractor.</li><li>The construction site itself is handed over to a contracted general contractor who is responsible for the construction site, safety, compliance with permits, and construction site management. The client representative acts as the second line of contact for client on site but does not bear any direct responsibility in the sense of a site manager vis-à-vis authorities or official bodies.</li></ul> Requirements: <ul><li>Electrical engineering training/degree with practical experience in the construction of energy industry facilities</li><li>Experience in the supervision, leadership, and management of large construction sites.</li><li>Experience in monitoring occupational safety.</li><li>Experience in commissioning electrical engineering systems - 10 kV desirable</li><li>Good verbal and written communication skills with the general contractor</li></ul> For more info, do not hesitate to get in touch!

Site Manager (Bauleiter)

Land Surveyor Start date: ASAP Duration: Long term contract. Location: Hoboken Belgium Rotation: Monday-Friday. Description The client is a global leader in materials technology. It is a stable international group and, at the same time, a thoroughly Belgian company with four sites in Belgium. We develop technologies and produce materials for high-quality solar cells used in satellites, rechargeable batteries, LED applications, catalysts, and more. Through recycling, we extract valuable metals from items such as laptops and mobile phones. Department Description and Responsibilities The newly established Space Management & Infrastructure service within the Technology department is responsible for the management and development of the site infrastructure in Hoboken. The Hoboken site comprises various buildings, installations, roads, cable and pipeline networks, sewage systems, and piperacks. The Space Management & Infrastructure department acts as the central link between internal services for managing infrastructure data, conducting inspections, and ensuring changes are correctly incorporated into digital and 3D models. Safety and compliance with Seveso standards are top priorities. Primary Tasks and Responsibilities • Supporting internal colleagues in the management of infrastructure projects, including inspections, measurements, and updating digital and 3D models. Infrastructure is interpreted in its broadest sense: buildings, installations, roads, cables and pipelines, sewage systems, piperacks, etc. • The role contributes to the internal ambition to carry out surveying tasks internally instead of outsourcing. • You will assist in ensuring all changes to this infrastructure are properly recorded; you will update all changes on the site plan and in the 3D model. • The 3D model of the utility pipelines on the site is under development, and you will help manage and expand this model. • Co-develop solutions regarding our infrastructure: traffic safety, environmental measures, maintenance proposals, and compliance with legislation. • Creating digital site plans is a fundamental part of the job. • SAP skills for searching old documents in our archives are an advantage. • You will be working on a Seveso site where safety is the highest priority. Procedures and safety rules must be strictly followed (Golden Rules), and exemplary behaviour is essential. Technical Profile Requirements • You hold a Bachelor’s or Master’s degree specialising in construction or surveying, or you have equivalent experience. • You have at least 5 years of experience in monitoring and executing construction works; basic training as a surveyor is required. • Multidisciplinary construction knowledge is an asset, and a background in infrastructure works is a significant plus. • You are familiar with safety standards within the construction industry and legislation, as well as the usual procedures at a Seveso or (petro)chemical company such as the client. • You are capable of independently conducting surveying measurements on projects in progress, such as staking out Lambert coordinates and measuring cables and pipelines. • You are familiar with the following software programmes: o MS Office o SAP o AutoCAD o Revit is a plus o Navisworks, Ultimo, Plant2D, Inventor are a plus Non-Technical Profile Requirements • Good communication skills and a structured working style. • Flexibility to switch quickly between tasks. • Safety awareness and exemplary behaviour. Language Proficiencies • Dutch: fluent • English: basic knowledge Location • Hoboken – client site. • 100% onsite presence required – occasional homeworking is possible. Contract • This is an internal position, temporarily replaced by an external contractor. • We are open to internalisation after 6–12 months. Contractor moving to Perm. Skills required – Experience as infrastructure 3D designer in an industrial environment - 5 Years Experience as Land surveyor - 5 Years Experience in infrastructure surveys - 7 Years You have a degree in Construction or Surveying – Yes Please fill in the additional questionnaire – each candidate needs to complete this to be considered by the client

Land Surveyor

My client is a global leader in materials technology. The newly established Space Management & Infrastructure service within the Technology department is responsible for the management and development of the site infrastructure in Hoboken. The Hoboken site comprises various buildings, installations, roads, cable and pipeline networks, sewage systems, and piperacks. They are looking for a Land Survey for a 6-12 months contract with options to move permanent after. Primary Tasks and Responsibilities <ul><li>Supporting internal colleagues in the management of infrastructure projects, including inspections, measurements, and updating digital and 3D models. Infrastructure is interpreted in its broadest sense: buildings, installations, roads, cables and pipelines, sewage systems, piperacks, etc.</li><li>The role contributes to the internal ambition to carry out surveying tasks internally instead of outsourcing.</li><li>You will assist in ensuring all changes to this infrastructure are properly recorded; you will update all changes on the site plan and in the 3D model.</li><li>The 3D model of the utility pipelines on the site is under development, and you will help manage and expand this model.</li><li>Co-develop solutions regarding our infrastructure: traffic safety, environmental measures, maintenance proposals, and compliance with legislation.</li></ul> Technical Profile Requirements <ul><li>You hold a Bachelor’s or Master’s degree specialising in construction or surveying, or you have equivalent experience.</li><li>You have at least 5 years of experience in monitoring and executing construction works; basic training as a surveyor is required.</li><li>Multidisciplinary construction knowledge is an asset, and a background in infrastructure works is a significant plus.</li><li>Fluent Dutch</li></ul> For more information, do not hesitate to get in touch!

Site Manager (Bauleiter – Building Leader) Duration: 01/04/2026 – 28/02/2027 Type: Freelance Description: The site manager or client representative is a functional role in a project for which the following skills are desirable: - Electrical engineering training/degree with practical experience in the construction of energy industry facilities - Experience in the supervision, leadership, and management of large construction sites. - Experience in monitoring occupational safety. - Experience in commissioning electrical engineering systems ? 10 kV desirable - Good verbal and written communication skills with the general contractor, suppliers, the client site on location, and headquarters in Essen. Job description: The site manager/client representative is a functional role in a project, which essentially involves the following activities (list is not exhaustive). - Client representative on the construction site vis-à-vis the general contractor, the neighbouring client Nuclear site and, if applicable, authorities. - Management of and contact person for the general contractor and client's own suppliers - Coordination, management, instruction, supervision, and support of client's component suppliers at and on the construction site. - Interface coordination with the neighbouring power plant and engineering colleagues in Essen and Dresden - Responsibility for the construction and commissioning of the construction site in the role of client - Responsibility for health, safety, and the environment on the construction site in the role and on behalf of the client - Monitoring the work of component suppliers and general contractors - Coordinating and monitoring the commissioning of components provided by the client (battery containers, converters, MV and HV transformers) by the relevant suppliers together with the general contractor. - The construction site itself is handed over to a contracted general contractor who is responsible for the construction site, safety, compliance with permits, and construction site management. The client representative acts as the second line of contact for the client on site but does not bear any direct responsibility in the sense of a site manager vis-à-vis authorities or official bodies. NOTE: proficiency in German language is MANDATORY

Site Manager

Offshore HV Senior Authorized Person North Sea, Offshore Germany 02/02/2026 – 31/08/2026 Scope of Work: <ul><li>Work alongside the Electrical Systems Package site representatives and Client Commissioning Team to assist in delivering the hot commissioning activities as Clients Engineer, driving the work scope forward on site to meet the project programme.</li><li>Client witness and sign off for Stage 1 and Stage 2 completion for Substations</li><li>Provide technical support for Project Senior Authorised Persons and M&E Engineers.</li><li>Reporting to the Commissioning Manager (Lead)</li><li>Based principally in the Jack-Up Vessel following installation of the assets offshore. Alternatively, limited work period in the onshore construction yard before Load-Out.</li><li>Initial investigation and reporting of incidents</li><li>Plan, document and perform switching operations (66 kV – 155 kV) at offshore substations, export cables, and wind turbines in line with RWE HV Safety Rules.</li><li>Manage the Permit to Work (PTW) system – Permit request and approval,.</li><li>Carry out fault diagnosis and troubleshooting on offshore HV equipment.</li></ul> Deliverables: <ul><li>Weekly reporting and record keeping on progress and issues to the Commissioning Manager (Lead)</li><li>Liaise with Engineering and Quality Departments to ensure Outstanding Engineering/Quality Issues are resolved.</li><li>Interface with the IAC team, OSS team and WTG team.</li><li>Elaboration of Switching Plan and HV Switching Schedules.</li><li>Responsible for revisionof accurate ‘As Built’ Drawings and Records produced by Contractors.</li></ul> Certifications: <ul><li>Relevant technical education in an electrical engineering discipline</li><li>Certified Switching Operator (Schaltberechtigter) or eligibility to be certified with the corresponding training.</li><li>GWO basic safety training</li><li>GWO Enhanced First Aid Training (Ersthelfer Offshore DGUV)</li><li>Helicopter Underwater Escape Training (HUET)</li><li>Offshore medical fitness</li><li>Other requirements:</li><li>Proven experience as Senior Authorized Person in MV/HV assets (Client or Contractor role)</li><li>Knowledge of testing Alarms/Controls/Indications from a range of MV/HV Equipment</li><li>Knowledge of commissioning of LV/MV/HV Switchgear and associated components.</li><li>Knowledge of GE/Hitachi protection relays including IEC61850/Goose communications is desirable.</li><li>Experience of BMS Systems is desirable</li><li>Understanding of HV Safety Rules.</li><li>Self-starting with planning/coordination and problem solving abilities.</li><li>Fluent written and verbal English with good communication skills.</li><li>Broad knowledge of HV/MV equipment operations combined with commissioning experience.</li><li>Eligibility to be nominated as Electrical Person in Charge of the Electrical Installation</li></ul>

Offshore HV Senior Authorised Person

Commissioning Manager – Data Centres We are seeking an experienced Commissioning Manager to join a collaborative, high-performing project team delivering complex data centre projects. This role offers the opportunity to work alongside highly skilled, culturally diverse professionals in an environment that values trust, ownership, and shared success. You will be empowered to take real responsibility for the commissioning process, play a key role in project delivery, and continue to grow your technical and leadership capabilities within a challenging and rewarding environment. Key Responsibilities<ul><li>Attend key project meetings to monitor progress, collaborate on problem solving, and clearly communicate impacts to stakeholders</li><li>Conduct site inspections to review QA/QC compliance and commissioning activities</li><li>Develop, implement, and manage the project commissioning strategy and procedures</li><li>Drive the commissioning process, including scope definition, scheduling, and execution</li><li>Review and apply best practices to deliver quality, cost-effective commissioning solutions</li><li>Communicate commissioning progress related to scope, schedule, and budget to senior stakeholders</li><li>Oversee vendor performance to ensure high-quality delivery</li><li>Facilitate coordination meetings with vendor and contractor project managers</li><li>Identify and manage interfaces, dependencies, timelines, and budgets across multiple stakeholders</li><li>Proactively identify issues and work collaboratively to resolve them</li><li>Oversee and manage client-appointed commissioning teams</li><li>Work independently in support of a wider data centre commissioning program</li></ul>About You<ul><li>Strong technical understanding of UPS systems, switchgear, generators, and critical mechanical systems</li><li>Proven experience developing detailed commissioning scripts</li><li>Demonstrated experience project managing data centre projects</li><li>Degree or equivalent experience in project management, engineering, construction, or a related discipline</li><li>A collaborative mindset with the ability to build strong relationships with teams and clients</li><li>Comfortable working in a fast-paced environment with multiple priorities</li></ul>

Commissioning Manager

Position Overview We are seeking a qualified Inspector to provide on-site quality oversight for the manufacturing and final preparation of UF6 (Uranium Hexafluoride) cylinders. T The inspector will witness critical operations, ensure compliance with nuclear industry standards, and verify adherence to client-specified procedures. This role requires strict attention to detail, safety consciousness, and technical expertise in pressure vessel inspection. Primary Responsibilities 1. Internal Cleanliness Inspection • Witness and verify cylinder internal cleanliness compliance with ANSI N14.1 / ISO 7195 standards 2. Component Installation Oversight • Witness valve and plug installation immediately following internal inspection per latest Westerman procedure (client-released version) • Verify applied torque values align with WNTI GPG – Installation of valves and plugs in UF6 cylinders 3. Leak Testing & Sealing • Witness leak testing of threaded connections, valve seats, and packing per latest Westerman work instructions (client-released version) • Witness final sealing of valves and plugs per client instruction UG-LOG-Inst-02 4. Nonconformance Management • Document and report all deviations immediately to both Client and fabricator • Verify Client acceptance of nonconforming conditions before fabricator implements corrective actions 5. Reporting • Prepare and submit bi-weekly Source Inspection Reports detailing: o Equipment inspected (by serial/unit numbers) o Inspection activities performed o Results and acceptance status o Any deviations or corrective actions taken Required Qualifications • High School Diploma or equivalent (minimum); Technical/Engineering degree preferred • Certified Welding Inspector (CWI) or ASNT NDT Level II certification (or equivalent) strongly preferred • Minimum 3-5 years of experience in: o Pressure vessel inspection o Nuclear/uranium processing equipment o Chemical/Nuclear cylinder manufacturing • Proven experience with ANSI, ISO, and nuclear industry standards • Familiarity with torque verification, leak testing, and sealing procedures Essential Skills • Strong understanding of quality assurance/quality control (QA/QC) principles • Ability to read and interpret technical drawings, procedures, and specifications • Proficiency in technical report writing • Basic computer skills (Microsoft Office, report templates) • Excellent communication and interpersonal skills for vendor-client liaison

Pressure Vessel Inspector

My client&nbsp;has subcontracted the cable pulling works for the land cable part of their project in Germany. 1 Cable Pulling Surveyor will be required on site to follow and survey the cable pulling activities Function: Follow and survey the cable pulling works on site for the installation of the land cables for&nbsp;project work in Germany Purpose: 
<ul>
<li>Ensure that the cable pulling works are done in accordance with existing procedures, specifications and permits</li>
<li>Ensure that the cable pulling works are executed according to the contractual specifications</li>
</ul>
 Areas of Responsibility: 
<ul>
<li>Follow and survey the cable pulling activities</li>
<li>Follow and survey the inspection activities related to cable pulling</li>
<li>Support on HSE topics related to cable pulling</li>
<li>Report on a daily basis on the progress and status of the cable pulling works and on the observations made</li>
<li>Follows risks, incidents, issues and actions related to able pulling works</li>
<li>Support the Project Manager, Site Manager regarding technical questions</li>
<li>Support the project claim management with technical explanations and information</li>
<li>Work and support on project documents related to cable pulling works</li>
<li>Support the procurement process with technical input</li>
</ul>
Competencies and Qualification: 
<ul>
<li>Experience in cable pulling works or similar works</li>
<li>Experience in High Voltage Land cable installation projects</li>
<li>Readiness to work on construction site</li>
<li>Knowledge of standard IT-tools (Word, Excel, Windows&hellip;)</li>
<li>Driving license</li>
<li>Speaking German and English</li>
</ul>
For more information, do not hesitate to get in touch!

Cable Pulling Surveyor

Deputy Technical Project Director &ndash; Electrical &ndash; DC Projects! Earthstream is currently partnered with an international business that delivers large-scale turnkey Data Centre projects, who are looking for an experienced Deputy Tech Director (Electrical) to join the team. As Deputy Technical Director you will play a key expert role within the Technical Department, coordinating stakeholders, managing technical exchanges with clients, and acting as a trusted technical representative on projects. Key Responsibilities: During the Commercial / Tender Phase For projects with a strong design component, you will be responsible for:
<ul>
<li>De-risking projects from a technical standpoint</li>
<li>Defining study priorities and engineering strategies</li>
<li>Managing external engineering resources where necessary</li>
<li>Defining the optimal study path to meet cost, schedule and technical objectives</li>
<li>Acting as the customer&rsquo;s trusted technical interlocutor</li>
<li>Negotiating and contractually qualifying technical aspects of the project</li>
</ul>
 During the Execution Phase On large-scale or technically critical projects, you may act as Technical Assistant to the Project Director, with responsibilities including:
<ul>
<li>Close collaboration with Design Managers</li>
<li>Identification of technical risks and bottlenecks</li>
<li>Proposal and implementation of technical solutions</li>
<li>Involvement throughout the full project lifecycle, from design to commissioning</li>
</ul>
 Your Profile
<ul>
<li>Engineering degree, ideally Electrical or equivalent)</li>
<li>15 years of experience in the electrical field</li>
<li>Recognised technical expert in electrical standards and regulations</li>
<li>Strong expertise in electrical distribution design</li>
<li>Strong adaptability and problem-solving skills</li>
<li>Ability to coordinate complex technical topics and multiple stakeholders</li>
<li>High level of rigor, flexibility, and professional curiosity</li>
<li>Excellent teamwork and interpersonal skills</li>
<li>Fluent technical English, enabling effective communication with international partners and clients during tender and project phases</li>
</ul>
Please get in touch asap to be considered!

Deputy Technical Project Director

Mechanical Project Manager - Data Centre Projects - Paris Earthstream is currently partnered with an international business that delivers large-scale turnkey Data Centre projects, who are looking for an experienced Mechanical Project Manager (HVAC) to join the team. Reporting to the Head of the Technical Department, you will focus on the development of technical and financial studies for data centre construction projects, covering HVAC (CVC), Smoke extraction, and Plumbing. You will be responsible for leading and coordinating project bidding activities, proposing technical and economic variants, drafting the technical and methodological sections of commercial offers, and managing a project team of 2/3 people. You will also liaise with external partners and clients’ technical teams throughout the bidding and design phases. Essential skills and experience: <ul><li>Engineering Degree - HVAC / Mechanical / Building Services or equivalent)</li><li>10 years’ experience in ventilation/HVAC systems</li><li>Strong knowledge of HVAC standards, technical regulations, system design</li><li>Ability to coordinate complex technical topics and multiple stakeholders</li><li>Strong teamwork, interpersonal and managerial skills</li><li>Fluent technical English, enabling effective communication with partners and customers during bidding phases</li><li>Knowledge of AutoCAD, Revit and Quick Devis 7 is a plus</li></ul>Get in touch asap to be considered!

Mechanical Project Manager 

WTG Fabrication Supervisor Duration: 01-May-2026 - 31-Jul-2027 Business Unit: Engineering Category Name: WTG Fabrication Supervisor Type: Inside IR35 Description: 1. Role objective
<ul>
<li>Monitor quality and progress of (WTG) Blades at WTG Supplier&rsquo;s factory in Hull, UK</li>
</ul>
 2. Responsibilities
<ul>
<li>Witness the supplier works</li>
<li>Witness the supplier's inspection activities</li>
<li>Follow-up on manufacturing progress (via Manufacturing Inspection Plan and project related plans of P/D Dates and shipments)</li>
<li>Report non-conformities and observations</li>
</ul>
 3. Tasks
<ul>
<li>Participate in final inspections (paint &amp; add on) and final tagging</li>
<li>Monitor production activities and production documentation as spot checks</li>
<li>Monitor product quality and participate in FAI activities</li>
<li>Report non-conformities detected during inspection and manufacturing (Clients Digital Inspection tool)</li>
<li>Report relevant quality issues in Client NCR system (i.e. Synergi)</li>
<li>Follow-up on preservation and maintenance of components at supplier's storage area</li>
<li>Follow-up on manufacturing progress according to agreed project manufacturing schedule (MIP)</li>
<li>Keep track of trend concerning repeated non-conformities and manufacturing errors and follow-up with the supplier concerning corrective and preventive actions</li>
<li>Documentation of daily work and inspections to WTG Fabrication &amp; Quality Manager</li>
<li>Prioritise participation in inspection for different Add on components according to failure trends and criticality of failures</li>
<li>Check of CTQs according to Digital inspection tool e.g LEP- VG &ndash; DT- Paint- LPS-LOPC</li>
<li>Review quality related as-built documentation</li>
<li>Highlight relevant HSE related issues</li>
</ul>
 4. Deliverables
<ul>
<li>Inspection and manufacturing reports</li>
<li>Non-conformity (Synergi) reports</li>
</ul>
 5. Working schedule
<ul>
<li>8 hours/day</li>
<li>5 days per week</li>
<li>Possible night shifts are expected (3 to 10 per month)</li>
</ul>
 6. Additional comments
<ul>
<li>Consultant should bring own PPE (Personal Protection Equipment) needed to perform the work and flashlight</li>
<li>Consultant should preferably live close to the blade manufacturing site</li>
<li>Work on weekend is not planned, but might become relevant as an exception</li>
<li>Access and work restrictions, e.g., due to HSE requirements, may exceptionally be applied by the supplier at their site, limiting chargeable workdays</li>
<li>Requirements:</li>
</ul>
 7. Qualifications
<ul>
<li>Technical education relevant for the subject matter.</li>
<li>Recommended 3 years of work experience within wind /manufacturing of blades</li>
<li>Recommended 1 year of experience from similar position</li>
<li>Good knowledge of Microsoft Office programmes and smart phone applications for digital inspections</li>
</ul>
 8. Language skills
<ul>
<li>Good English skills in writing and speaking</li>
</ul>
 9. Soft skills
<ul>
<li>Adaptable, works well in teams, strong communication abilities</li>
<li>Capable of establishing trustful relationship</li>
<li>Proactive</li>
<li>Self-driven</li>
<li>Hands on experience</li>
<li>Polite and calm by nature</li>
<li>Cooperative</li>
<li>Safety conscious</li>
<li>Quality conscious</li>
</ul>

Commissioning Supervisor &ndash; Solar PV Project Position Summary Responsible for supervising and coordinating commissioning and energization activities, ensuring the plant is safely tested, commissioned, and handed over in compliance with contractual and grid requirements. Key Responsibilities
<ul>
<li>Review and implement commissioning plans, procedures, and schedules.</li>
<li>Coordinate pre-commissioning and commissioning activities with EPC and grid operator.</li>
<li>Supervise functional testing, performance testing, and energization.</li>
<li>Ensure all commissioning documentation and test records are completed.</li>
<li>Support resolution of commissioning issues and punch-list items.</li>
<li>Assist with final handover and readiness for commercial operation.</li>
</ul>
Minimum Qualifications &amp; Experience
<ul>
<li>Degree or diploma in Electrical or Power Engineering.</li>
<li>5 years&rsquo; experience in commissioning of Solar PV or power plants.</li>
<li>Experience with grid compliance testing and performance testing.</li>
<li>Strong coordination and reporting skills.</li>
</ul>
Site Presence Options
<ul>
<li>Resident option: Full-time during commissioning phase</li>
<li>Ad-hoc option: Mobilized during defined commissioning windows</li>
</ul>

Commissioning Supervisor – Solar Project

Electrical Supervisor – Solar PV Project Position Summary The Electrical Supervisor will oversee electrical installation activities including DC, AC, inverters, transformers, MV/LV systems, and grid connection works. Key Responsibilities <ul><li>Supervise electrical works in accordance with approved drawings and standards.</li><li>Ensure correct installation of PV strings, combiner boxes, inverters, transformers, and cabling.</li><li>Verify testing activities (continuity, insulation resistance, functional tests).</li><li>Ensure compliance with quality plans, ITPs, and safety requirements.</li><li>Coordinate with commissioning activities and support punch-list closure.</li><li>Maintain accurate inspection and testing records.</li></ul>Minimum Qualifications & Experience <ul><li>Degree or diploma in Electrical Engineering.</li><li>5 years’ experience in Solar PV or power projects.</li><li>Strong knowledge of PV electrical systems and grid interconnection.</li><li>Experience in site inspections, testing, and documentation.</li></ul>Site Presence Options <ul><li>Resident option: Full-time on site</li><li>Ad-hoc option: Attendance during electrical installation and testing phases</li></ul>

Electrical Supervisor – Solar Project

Civil / Mechanical Supervisor – Solar PV Project Position Summary Responsible for supervising civil and mechanical construction activities to ensure works are executed in accordance with drawings, specifications, quality standards, and project schedule. Key Responsibilities<ul><li>Supervise civil works (earthworks, foundations, roads, drainage) and mechanical installations (mounting structures, trackers).</li><li>Verify works against approved drawings, method statements, and ITPs.</li><li>Coordinate daily activities with contractors and report progress/issues.</li><li>Ensure quality control checks and inspections are completed and documented.</li><li>Support resolution of technical issues and construction non-conformities.</li><li>Coordinate with Electrical and Commissioning teams to ensure interface alignment.</li></ul>Minimum Qualifications & Experience<ul><li>Degree or diploma in Civil or Mechanical Engineering.</li><li>5 years’ experience in energy or Solar PV construction projects.</li><li>Experience with large-scale PV mounting systems and civil works.</li><li>Good understanding of construction quality control and site documentation.</li></ul>Site Presence Options<ul><li>Resident option: Full-time on-site</li><li>Ad-hoc option: Site attendance during critical civil/mechanical phases</li></ul>

Civil / Mechanical Supervisor – Solar Project

HSE Supervisor &ndash; Solar PV Project Position Summary The HSE Supervisor is responsible for implementing and monitoring Health, Safety, and Environmental (HSE) requirements on site to ensure compliance with project standards, Moroccan regulations, and international best practices. Key Responsibilities
<ul>
<li>Implement and enforce the Project HSE Plan.</li>
<li>Conduct site inspections, toolbox talks, and safety inductions.</li>
<li>Monitor contractor compliance with HSE procedures and permits to work.</li>
<li>Report incidents, near misses, and unsafe conditions; support investigations and corrective actions.</li>
<li>Ensure environmental controls are implemented (waste management, dust, noise, spill prevention).</li>
<li>Maintain HSE records, statistics, and reporting.</li>
<li>Liaise with Site Manager and Client on HSE performance.</li>
</ul>
Minimum Qualifications &amp; Experience
<ul>
<li>Technical diploma or degree (Engineering, HSE, or related discipline).</li>
<li>Minimum 5 years&rsquo; experience in energy or Solar PV construction projects.</li>
<li>Strong knowledge of construction site HSE risks and controls.</li>
<li>Familiarity with international standards (ISO 45001 / ISO 14001 preferred).</li>
<li>HSE certifications (NEBOSH, IOSH, or equivalent) are an advantage.</li>
</ul>
Site Presence Options
<ul>
<li>Resident option: Full-time on site</li>
<li>Ad-hoc option: Periodic site visits based on project needs</li>
</ul>

HSE Supervisor – Solar Project

Site Manager &ndash; Solar PV Project (Resident) Position Summary The Site Manager will act as the overall on-site representative, responsible for managing construction activities, coordinating contractors, and ensuring compliance with project schedule, quality, HSE, and contractual requirements. This is a 100% resident position. Key Responsibilities
<ul>
<li>Full responsibility for day-to-day site management of the Solar PV project.</li>
<li>Coordinate and supervise all site activities including civil, mechanical, electrical, and commissioning works.</li>
<li>Act as the primary interface with EPC contractors, subcontractors, Owner&rsquo;s Engineer, and Client.</li>
<li>Ensure compliance with approved drawings, specifications, quality plans, and HSE requirements.</li>
<li>Monitor construction progress and support schedule recovery actions where required.</li>
<li>Lead site coordination meetings and report progress, risks, and issues to Project Management.</li>
<li>Ensure site documentation, daily reports, NCRs, RFIs, and progress records are properly managed.</li>
<li>Support handover activities and readiness for commissioning and commercial operation.</li>
</ul>
Minimum Qualifications &amp; Experience
<ul>
<li>Bachelor&rsquo;s degree in Engineering (Civil, Electrical, Mechanical, or equivalent).</li>
<li>8&ndash;10 years&rsquo; experience in energy projects, preferably Solar PV.</li>
<li>Strong experience in site construction supervision, contractor coordination, and quality control.</li>
<li>Proven leadership on utility-scale or large infrastructure projects.</li>
<li>Strong reporting and stakeholder management skills.</li>
</ul>
Site Presence
<ul>
<li>100% resident on site (mandatory)</li>
</ul>
Commercial Note All-inclusive resident daily/monthly rate to cover: salary/fee, accommodation, transport, per diem, insurance, taxes, and mobilisation.

Site Manager – Solar Project 

QHSE Officer Duration: 01/02/2026 &ndash; 31/03/2026 Location: UK Waters Project: NNG Project Type: Outside IR35 &nbsp; Description: DEME's objective is to provide a healthy work environment, to promote sound work practices and a healthy lifestyle for everyone involved in our business. QHSE is therefore one of the supportive departments that is involved in all Quality, Health, Safety and Environmental matters on our projects, vessels, and in HQ. As a project QHSE engineer you will be part of the team that is on site on one of our offshore projects worldwide, responsible for the maintenance and control of QHSE-S practices on site, as well as inspecting all activities and equipment to reassure proper operation and implementation of procedures. Primary Tasks and responsibilities: -Project QHSE reporting, KPI and communications with Project management and vessel -Participating in meetings and toolboxes onboard and on site -Investigation incidents &amp; non-conformities -Engage the supervisors and workforce to actively participate in HSE matters and campaigns -Carry out HSE inspections on the work floor and ensure proper reporting, communication and follow-up of the findings -Management SHOC cards on board/on site Technical profile requirements: -Provide support to the project team for all QHSE related matters -Ensure that personnel use the latest versions of PQMP, PHSEMP, ITP, MST, RA, etc. Non-Technical profile requirements: -Strong communication skills -Good knowledge &amp; experience with MS Office -Good command of English, both written and spoken - any other languages are a plus Methodology/Certification requirements: -MSC/MSc Degree in Civil Engineering, Mechanic Engineering, Chemical Engineering OR equivalent through experience OR MSc Degree Safety Engineering, prevention advisor level 1 &nbsp;

QHSE Officer

Onshore Substation Package Manager &nbsp; Period - 16/01/2026 to 01/03/2027 Business Unit - Package Management Electrical (OTC-CE) Rotations &ndash; Monday-Friday Type &ndash; Freelance contract outside IR35 Rate - &pound;800 a day &nbsp; Location: Swindon office, London Project Office, Coventry Office or Necton Onshore Substation, Swaffham, Norfolk. PE37 8EG. Travel also required to these sites as required for the works. &nbsp; Description: The role will safely deliver all aspects of the design, contracting, construction and handover to operations of the Onshore Substation Package &bull; As the Onshore Substation Package Manager you will safely deliver the Onshore Substation and connection to the national electricity transmission network including substation design, supply, installation and commissioning, and liaison with the RWE 400kV package Manager Grid/TSO and other authorities as required. You will ensure the package equipment is developed and integrated fully into the wider electrical system including the offshore substations, offshore cables and landfall infrastructure and handed over with all documentation complete as required. &bull; Deliver the electrical system, procurement and project management of the electrical system component parts (where technical and commercial synergies exist) in liaison with the Lead Electrical Engineer and Senior Project Manager for the project. &bull; Be responsible for the planning, time schedule and budget control of the Onshore Substation, grid connection works and associated electrical systems and equipment, and civils and mechanical works. &bull; Face to face interactions with the site team and main contractor at the construction site is expected for a minimum of two days per week. &nbsp; CERTIFICATIONS &bull; Degree or Chartership in Project Management and membership of recognised Project Management organisation such as APM &bull; Sound knowledge of Electrical Engineering, preferably higher qualification, or closely related competency &bull; Renewable energy/offshore wind farm experience &bull; Demonstrable experience of working effectively in an international business OTHER REQUIREMENTS &bull; Understanding of and ability to work to the CDM regulations. &bull; Experience of working in package management of Offshore substations or closely related complex infrastructure. &bull; Experience on large, complex capital projects through development and construction phase, especially HV and EHV transmission systems and associated works in the UK. &bull; Knowledge of grid infrastructure and grid code &bull; Renewable energy/offshore wind farm experience &nbsp;

Onshore Substation Package Manager - RWE

​With 5 years of experience in recruitment, Hari joins our Bromley team as a Delivery Consultant focusing on the renewables sector.

Hari Udhaydharshan

Delivery Consultant

03/2026 – 05/2027 Denmark – travel to various locations globally 14/14 rotation   Description: <ul><li>UVS Operator/Pilot that can operate the clients USV´s from on of the Ørsted Remote Operating Centers (ROC).</li><li>It will primarily be from the ROC at the ESK or GTF office location (candidate can often chose).</li><li>Initially and occasionally there will be trips to site (Grimsby UK) to either operate the vessel from the ROC or via remote control within line of sight to get the USV in and out of harbor.</li><li>This will be on ad-hoc basis, up to 12 hours per day and up to 7 days a week. Night-time work is also to be expected in some occasions.</li><li>The job can (if mutually agreed) include service and maintenance or supervision of suppliers working on the vessels.</li></ul>  Requirements: <ul><li>The candidate must hold the certificates specified below and they must be up to date.</li><li>USV Operator Training Course (Maritime Robotics) (This can be arranged after hiring)</li><li>GWO or STCW Basic Safety Training VI/I 1,2,3,4</li><li>GMDSS Restricted Operator Certificate</li><li>STCW Deck Hand for USV</li><li>STCW ECDIS AIS for USV</li><li>STCW Radar/ARPA for USV</li><li>USV Experience is a firm requirement.</li><li>The Candidate must be able to travel to and work in the UK (Potential Visa will be at their own expense).</li><li>The candidate must bring own relevant PPE for site work including but not limited to life vest when working near key side.</li></ul> For more info, do not hestiate to get in touch!

USV Operator

APPLY FOR THIS JOB

Hari Udhaydharshan