Summary The lead Control & Protection System Application Engineer is responsible for the requirement definition, design, studies, validation, and commissioning of Control & Protection Systems for VSC based HVDC transmission schemes, including MMC converter technology. This role provides technical leadership across the full project lifecycle, ensuring compliance with applicable standards and delivering reliable, safe, and high-performance HVDC systems.   Roles and Responsibilities   <ol><li> Technical Leadership</li></ol><ul><li>Oversee the overall technical solution, ensuring customer requirements are met based on reference solutions.</li><li>Lead requirements gathering, system design, implementation, and development of HVDC Control & Protection systems.</li><li>Lead the HVDC control and protection system design for LCC and/or VSC HVDC schemes.</li><li>Act as the technical authority for controls and protection within the project team.</li><li>Review and approve technical documents, including control/protection settings, control philosophies, protection logic, and system architecture, test plans, and test procedures.</li><li>Serve as the primary customer interface for technical discussions, training, and requirement clarification.</li></ul>  <ol><li> Control System & Protection Design</li></ol><ul><li>Define control philosophies, protection and interlocking logics, and data exchange configurations.</li><li>Lead and participate in engineering design processes, including design reviews and approval cycles.</li><li>Ensure that all design outputs comply with industry standards, system requirements, and quality procedures.</li></ul>  <ol><li>Advanced Modelling & Simulation</li></ol><ul><li>Conduct Electromagnetic Transient (EMT) studies using PSCAD, EMTP-RV, and model control/protection functions in MATLAB/Simulink.</li><li>Perform network conversion, modelling, tuning, and verification using PSSE, PSCAD, MATLAB and RSCAD.</li><li>Develop full plant/system models and lead end-to-end validation across multiple simulation platforms.</li><li>Lead Control System Studies & Testing, including:</li></ul>o Software-in-the-Loop (SIL) o Dynamic performance studies o Protection coordination o Overall system integration   <ol><li>System Testing & Commissioning</li></ol><ul><li>Conduct Integration System Test (IST), Functional System Test (FST), Factory Acceptance Tests (FAT), Site Acceptance Tests (SAT), and system commissioning at customer sites.</li><li>Lead root cause analysis and troubleshooting of complex VSC control and protection issues.</li></ul>  <ol><li> Process Improvement & Operational Excellence</li></ol><ul><li>Identify and implement improvements in engineering tools, processes, systems, and technical solutions to enhance customer value and operational efficiency.</li><li>Make informed decisions regarding work processes, schedules, priorities, and operational plans to achieve departmental objectives.</li><li>Uphold and promote SQDC principles across teams.</li></ul>  Required Qualifications & Skills <ul><li>Education: Degree in Electronics/Electrical Engineering or equivalent proven experience in HVDC systems.</li><li>Experience: Minimum 7 years in HVDC control and protection system design.</li><li>Technical Expertise:</li><li>HVDC Control, Protection, and Sequencing strategies.</li><li>Dynamic performance studies and system modelling for VSC-HVDC schemes.</li><li>Proficiency in PSCAD and MATLAB/Simulink.</li></ul>

Lead Control & Protection System Application Engineer

Summary <ul><li>As part of the V and V Test Automation Engineering team, the Automation test engineer will work with a highly motivated, and dynamic team of engineers on the delivery and automation of existing and new power electronics application requirements for power systems, particularly for HVDC converters and the forthcoming “HVDC Grid”.</li><li>The development of scripts is technically challenging and involves a variety of engineering disciplines, contribution through teamwork, clear communication with the software and validation departments of the project and an innovative approach.</li><li> </li></ul>Essential responsibilities: <ul><li>Design and develop testing framework.</li><li>Test automation planning.</li><li>Develop test scripts according to company defined standards.</li><li>Support create and enhance in-house tools.</li><li>Execution of automated tests for different aspects such as PSCAD and MATLAB.</li><li>Clearly communicate details of failures to the respective engineering functions.</li><li>Carry out execution of tests and provide clear reporting of results.</li><li>Seek to automate testing wherever possible using out automatic testing platform.</li><li>Support continual improvement, raising the effectiveness and efficiency of the team through the introduction of tools, methods, and process improvements.</li></ul>  Qualifications and requirements: <ul><li>Engineering degree or equivalent including power systems and power electronics subjects or proven equivalent knowledge and experience in embedded system testing.</li><li>Moderate experience in the automation test across any industry.</li><li>Experience of working with test frameworks involved in testing of embedded systems.</li><li>Strong communication skills with a fluency in English language.</li><li>Willingness to travel to support projects globally and readiness for flexible with working hours</li></ul>  Desired characteristics <ul><li>Strong knowledge of python programming.</li><li>Good understanding of how scripts interact with the software environment.</li><li>Specification & report writing such as technical note.</li><li>Flexible work approach.</li><li>Eager to learn.</li><li>Strong problem-solving skills.</li><li>Good communication skills.</li><li>Accountable for delivery.</li><li>Proactive approach to solve issues.</li><li>Perfection seeking mindset.</li><li>Can deliver under tight schedule and pressure.</li><li>Attention to details.</li><li>Organised.</li><li>EHS compliance ability.</li></ul>

Automation Test Engineer

QHSE Offshore Medical Officer – Senior Duration: 13/7/2026 – 16/10/2026 Location: Rhode Island USA Rotation: 4/4 – 5/5 Description: Client information This client is a world leader in the highly specialised fields of dredging, solutions for the offshore energy market, infra marine and environmental works. With more than 140 years of experience and 5,200 highly skilled professionals, we bring tailor-made solutions, innovation and new technologies to our customers’ projects, ensuring that they are performed safely, efficiently and cost-effectively. Department Description and Responsibilities As an Offshore Medic, you will play a key role as part of the on-site team assigned to one of our offshore projects worldwide. In this role, you will be responsible for overseeing, maintaining, and controlling all medical practices onboard, ensuring they meet company and international standards. Your duties will include providing direct medical care to personnel, managing medical facilities and supplies, and conducting regular inspections of activities and equipment to verify their compliance with health and safety requirements. You will also ensure the proper implementation of medical procedures, support emergency response preparedness, and contribute to promoting a safe and healthy working environment for all offshore staff. Primary Tasks and Responsibilities - Provide medical care to offshore personnel, including emergency response, occupational health treatments, and accurate documentation of all cases. - Maintain and operate the offshore medical facilities, ensuring readiness, functionality, and availability of sufficient medical supplies and equipment. - Ensure proper documentation and filing of medical reports, compile statistics, and provide analysis and reports as required. - Oversee occupational health and hygiene programs, including health surveillance, fitness-to-work monitoring, and workplace environment assessments. - Assist in planning and conducting emergency drills and training exercises, evaluate medical preparedness, and recommend improvements. - Actively participate in safety meetings and toolbox talks, providing medical and health-related input where relevant. - Support incident investigations from a medical perspective, ensuring findings and corrective actions are documented and followed-up. - Carry out medical inspections onboard, ensuring compliance with health standards, proper reporting, and effective follow-up. Technical profile requirements - 5 years’ experience as Offshore Medic in high-risk industries. - Good knowledge & experience with MS Office. - Experience with Offshore Wind operations is a plus. - Willingness to travel abroad on 4:4 or 5:5 rotation. - Fit for Offshore work. Non-Technical profile requirements - Pragmatic, proactive and forward-thinking. - Team player, excellent communication skills, tactful. - Service-oriented and problem-solving attitude. - Critical and analytical thinking. - Accurate, efficient in organising your work. Job-specific certification requirements - HSE Offshore Medic (or similar). - Licensed Medic. - NEBOSH IDIP/Certificate or similar (through experience) is a plus. Offshore-specific certifications requirements -Full GWO -Offshore Medical. -Helicopter Underwater Escape Techniques (HUET) CA-EBS. -Chester Step Test (or similar) -Bi-deltoid measurement VISA requirements - US B1 OCS WIND VISA (!!) Language proficiencies - Fluent proficiency in English is required (written and spoken). - Proficiency in other languages is a plus

QHSE Offshore Medical Officer

US - Protection Engineer Location: Rhode Island, USA Duration: 15-Jun-2026 - 31-Dec-2026 Business Unit: Engineering Rotation: 21 days on / 21 days off Project: Sunrise Wind Farm Description We're looking for a consultant of protection engineer or protection test engineer to be onsite at SRW01 offshore in US. S/he would be in 21/21 rotation scheme and to work closely with our protection lead (protection system engineer) in the project. Requirements: - Preferably HVDC protection engineer - Preferably has great knowledge about Siemens HVDC equipment - Must have a minimum of 1 year experience at offshore site OR a minimum of 3 years experience at onsite substation. - Has GWO valid certificate.

Protection Engineer

Senior Onshore Civils Engineer Duration: 15/05/2026 to 14/05/2027 (ASAP) Project: Dogger Bank South AYM Type: Freelance Base location: London, Swindon or Coventry Travel: Expensed back outside of base location The Senior Onshore Civils Project Engineer will play a key role in defining the optimal solution for the onshore infrastructure associated with the project. The role will include the Landfall, onshore cable route, and the onshore substation. The successful candidate will have strong project management skills and knowledge of the onshore civil works which are required for the development and operations of an offshore wind farm. Experience working in offshore wind is not essential, though this would be an advantage, and transferable skills from a related industry would be necessary. Your key tasks and responsibilities: As a Senior Project Engineer for Onshore Civils your primary responsibilities will be to: Thrive as part of a multi-disciplinary team of technical specialists supporting all stages of the offshore wind farm Support the site selection and design activities through the consent phase Manage the civil engineering activities and design contract during the FEED and Detailed Design stages, and then continue supporting the project on into construction Ensure alignment with the CDM and company policies Support Offshore Operations in driving the lifecycle implementation strategy for the installed works Manage and implement onshore site investigation works Deliver specialist engineering knowledge for onshore cable routing and crossing design (with particular emphasis on trenchless methods) Support with technical input to landowner negotiations Mentor and develop junior and associate colleagues within the team Support preparing the employer’s requirements and technical specifications through the tender process with technical input to programme development Participate in the procurement activities associated with onshore civil works in the project Provide financial estimates for the project cost book based on your experience from similar schemes and extrapolations from prior projects Management of sub-consultants, ensuring that safety in design is appropriately accounted for in the designs and that quality requirements are met Work closely across all interfaces with; internal stakeholders, external design houses and Contractors to produce cost-effective and value-added solutions Ensure that all lessons learned from the completed works are incorporated into future projects. Essential skill requirements: Educated to degree level in civil or structural engineering or equivalent experience Have a successful track record in the delivery of onshore civil works within the power industry Project management experience in the offshore industry from either design, construction, or operations Strong appreciation for CDM Regulations, safe systems of work and Environmental requirements Excellent communication and negotiation skills, able to communicate effectively within a team The capability to work within a team and to manage competing demands from the project Strong coordination and leadership skills; highly motivated; confident and resourceful The drive and motivation to meet the time, cost and quality targets Desirable skills: Member of professional engineering body Understand the process of developing and constructing the onshore portion of an offshore wind farm A proven track record in civil engineering development and installation of an Onshore HV electrical system and a HV substation Deep understanding of onshore civil design across the entire project lifecycle from pre-FEED to detailed design Understanding and ability to communicate with other engineering disciplines Understand the range of available civil engineering methodologies, including cable placement/HDD, with a practical approach to implementation Ability to carry out/ participate in risk management and optioneering to obtain the most favourable outcomes/ solutions Development of EPC-type technical contracts from a Client perspective Desirable skills: Key Qualifications: <ul><li>Degree/diploma in Civil, Structural/mechanical Engineer</li></ul>

Senior Onshore Civils Engineer

10 x BAL02 OSS: Offshore Electrical Inst. & Comm. Supervisor  Project Name: BAL02 OSS Duration: 01-Nov-2026 - 30-Apr-2027 Business Unit: Engineering Rotations: 14days/14 days – 12 hours a day Type: Freelance     Description: Role Objective Guide management and liaise with back-office engineers, creating a clear insight into progress, risks, quality, and safety on site. Motivate progress and a safe work culture, through contractor engagement, coordination, and collaboration. Responsibilities It is the Offshore Electrical Installation & Commissioning Supervisor’s responsibility to facilitate constructive and fact-based communication between activities at site, Offshore Electrical Installation & Commissioning Management, and back-office functions within the project. Through honest observation-based feedback on progress and quality, enabling, especially the Offshore Electrical Installation & Commissioning Manager, to conduct solid risk assessments, present realistic forecasts to project management, and prepare for a smooth handover to Generation. While on site the Offshore Electrical Installation & Commissioning Supervisor is a role model for safe behaviour, inspiring contractors, sub-contractors, and site visitors to always think safety before quality and progress. Furthermore, the Offshore Electrical Installation & Commissioning Supervisor shall engage with the contractors and working party foremen to understand and obtain knowledge of issues related to quality and progress, collaborating with them to identify suitable mitigations, and finally reporting findings and contractors’ proposed mitigations to Offshore Electrical Installation & Commissioning Management. Tasks • Facilitate alignment meetings with respectively back-office engineers and on-site contractor team leads – enabling collaboration through open communication on quality, progress, and safety. • Update Electrical Installation & Commissioning Management on system specific progress, risks, and quality – providing observation-based input to scope related progress and risks. • Review contractor ITP and test procedures, and witness all test phases (FAT, SAT, SIT, OSAT, and OSIT) based on the Critical to Functionality (CtF) and Critical to Quality (CtQ) guidelines from the functional line department and project specific assessment. • Supervise delivery of equipment, ensuring that all damages and missing equipment is recorded and addressed to the contactor. This includes familiarisation with shipping lists and reviewing equipment unloading Risk Assessment & Method Statements (RAMS) • Supervise the contractors handling and installation of equipment during the outfitting and electrical installation, including pulling and termination of cables focusing on CtF and CtQ. • On projects with multiple contractors directly reporting to client on site, coordinate the on-site cross contractor interfaces and collaboration. • Supervise qualification (mechanical completion) of the installed equipment and cables (high voltage, low voltage, and communication cables). • Execute Low Voltage and High Voltage Authorised Person (LV AP and HV AP) scope, involving establishing and maintaining electrical safety, lock out/tag out, and energisation checks. • Support the PICOS, including substituting, in all matters related to safe substation management, including inductions, daily coordination, and safety drills. • Execute inspections and tests relevant for the Test After Completion prior to asset handover to Generation. • Provide lessons learned and improvement proposals, based on NCR’s, punches, and through using the processes and procedures supplied by the functional line department, enabling a continuous development of clients contracts and the standard processes and procedures, ensuring clients and the Electrical Installation & Commissioning Supervisor role always keep up with contemporary needs. • Take location and task-based safety training (e.g. Global Wind Organisation (GWO) training, and local supervisor safety certifications), observe and intervene on site based on safety on site, and report to the clients QHSE representative on site. Deliverables Completed Commissioning Document Register (CDR). [reported to the Offshore Electrical Installation & Commissioning Manager] Record system progress and provide daily input to the Daily Progress Report (DPR) using Lautec.[visualised through EnSync] Minutes of Meeting from regular alignment meetings with respectively back-office engineers and site-based contractors. [stored within project document management system] Rectified and closed out punches for all electrical and electromechanical systems. [recorded in Aconex Field] Recorded lessons learned and improvement proposals within. Synergi [responsible and actions defined in the Synergi cases] Inform about HSE related observation [observation cards or app, viewable by site HSE representative] Decision Authority Through witnessing of installation and test, the Onshore Electrical Installation and Commissioning Supervisor has the authority to accept or reject completion of test and commissioning, based on the contractual requirements and the project mandated requirements and acceptance criteria. The Consultant must bring his/her own Iphone. External consultants’ equipment such as PCs, mobile phones and iPads must always be up-to-date with the latest iOS release. The owner must allow clients AirWatch security and management software for iPhones and iPads to be installed. The app is mandatory on all mobile devices used by client staff (including External consultants) to protect them from cybercrime. The owner must grant approval for client to remove apps, data and access from privately owned equipment if it is deemed to pose a risk in relation to client security or the GDPR regulations, if the equipment is lost/stolen, or if the owner ceases to have an active contract with Magnit and/or client. When an external consultant leaves the client, they must contact the IT Service Desk to remove all client apps and data. The IT Service Desk can only support privately owned equipment in connection with clients AirWatch security and management software. Requirements: Qualification and Requirements • Possess a bachelor or higher educational degree within subject matter field of engineering. • Have recent experience and obtained competencies with installation, test, and commissioning of dynamic systems, equipment, components, and cables (i.e. high and low voltage electrical, electromechanical, mechanical, fluid, thermo, and multidiscipline dynamic systems) and control & communication systems, equipment, components, and cables (i.e. supervisory control & data acquisition, network, and telecommunication systems). • UKOG Medical Chester Step Test (minimum rating: above average). GWO training, following GWO Basic Safety Training Standard, GWO Enhanced First Aid Training Standard, GWO Control of Hazardous Energies Standard, and GWO High Voltage Standard. Polish Medical certificate Polish BHP training

Offshore Electrical & Installation Commissioning Supervisor

Job Title: Electrical Commissioning Manager Location: Kouvola, Finland Contract Type: Fixed-Term Contract (12 Months) Sector: Data Centre Construction Employer: General Contractor Reports To: Project Director / Commissioning Director Position Summary The Electrical Commissioning Manager will lead and manage all electrical commissioning activities for a large-scale data centre project in Kouvola, Finland. Acting on behalf of the General Contractor, the successful candidate will be responsible for the planning, coordination, execution, and successful delivery of electrical commissioning works from pre-commissioning through integrated systems testing and client handover. The role requires close collaboration with project management, construction teams, MEP subcontractors, equipment vendors, commissioning agents, and the client team to ensure all electrical systems are commissioned safely, efficiently, and in accordance with project specifications, industry standards, and programme requirements. Key Responsibilities Commissioning Leadership<ul><li>Develop and implement the project electrical commissioning strategy and execution plan. </li><li>Manage all electrical commissioning activities throughout the project lifecycle. </li><li>Coordinate commissioning activities with construction, quality, and project controls teams. </li><li>Ensure commissioning milestones align with the overall project schedule. </li><li>Lead commissioning meetings and provide regular progress updates to project leadership. </li></ul>Electrical Systems Management Oversee commissioning activities for: <ul><li>Medium Voltage (MV) distribution systems. </li><li>Low Voltage (LV) distribution systems. </li><li>Transformers. </li><li>Switchgear and switchboards. </li><li>UPS systems. </li><li>Static Transfer Switches (STS). </li><li>Standby generator systems. </li><li>Power monitoring and SCADA systems. </li><li>Earthing and lightning protection systems. </li><li>Electrical protection and control systems. </li><li>Fuel systems associated with backup power infrastructure. </li><li>Data hall power distribution systems. </li></ul>Planning & Documentation<ul><li>Review and approve commissioning procedures, method statements, test scripts, and commissioning schedules. </li><li>Ensure completion of pre-functional and functional testing documentation. </li><li>Maintain commissioning trackers, issue logs, and completion reports. </li><li>Review subcontractor commissioning documentation for compliance with project requirements. </li><li>Manage turnover documentation and handover packages. </li></ul>Stakeholder Coordination<ul><li>Interface with client commissioning teams and third-party commissioning agents. </li><li>Coordinate with MEP contractors, specialist vendors, utility providers, and authorities. </li><li>Facilitate integrated systems testing (IST) and witness testing activities. </li><li>Manage issue resolution and system deficiencies through to closure. </li></ul>Quality Assurance<ul><li>Ensure all commissioning activities are carried out in accordance with project specifications and approved procedures. </li><li>Verify compliance with relevant European, Finnish, and industry standards. </li><li>Support QA/QC inspections and system walkdowns. </li><li>Monitor commissioning readiness and system completion status. </li></ul>Health & Safety<ul><li>Promote and enforce a strong safety culture throughout all commissioning activities. </li><li>Ensure compliance with Finnish HSE regulations and project safety requirements. </li><li>Lead commissioning risk assessments and permit-to-work activities. </li><li>Participate in incident investigations and corrective action implementation where required. </li></ul>Reporting<ul><li>Produce weekly and monthly commissioning progress reports. </li><li>Track commissioning KPIs and milestone achievement. </li><li>Escalate programme risks and technical issues to senior management. </li><li>Provide accurate forecasting of commissioning resource requirements and completion dates. </li></ul>Candidate Requirements Essential Qualifications<ul><li>Degree or Diploma in Electrical Engineering or related discipline. </li><li>Minimum 10 years' experience in electrical construction and commissioning. </li><li>Minimum 5 years' experience in a commissioning leadership role on mission-critical facilities. </li><li>Demonstrated experience delivering electrical commissioning on large-scale data centre projects. </li><li>Strong understanding of commissioning methodologies and best practices. </li><li>Experience with integrated systems testing (IST). </li><li>Ability to read and interpret electrical drawings, schematics, and control philosophies. </li><li>Excellent stakeholder management and communication skills. </li><li>Fluent English language skills. </li></ul>Preferred Qualifications<ul><li>Previous experience working in Finland or the Nordic region. </li><li>Data centre commissioning experience exceeding 20MW critical load. </li><li>Knowledge of Finnish electrical regulations and European standards. </li><li>Commissioning certifications or relevant industry accreditations. </li><li>Experience with hyperscale data centre clients. </li></ul>Key Competencies<ul><li>Leadership and team management. </li><li>Programme and schedule management. </li><li>Technical problem solving. </li><li>Quality-focused approach. </li><li>Strong organisational skills. </li><li>Commercial awareness. </li><li>Ability to perform in a fast-paced construction environment. </li><li>Client-facing communication skills. </li></ul>Contract Details<ul><li>12-month fixed-term contract. </li><li>Site-based position in Kouvola, Finland. </li><li>Competitive day rate or monthly contract package. </li><li>Accommodation, travel allowance, and rotation arrangements subject to agreement. </li><li>Immediate or negotiated start date. </li></ul>Success Criteria The Electrical Commissioning Manager will be deemed successful when: <ul><li>Electrical systems are commissioned safely and without significant incidents. </li><li>Commissioning activities are completed in accordance with the project programme. </li><li>All electrical systems achieve successful integrated systems testing. </li><li>Client acceptance and handover milestones are achieved. </li><li>Commissioning documentation is completed to the required standard. </li><li>Project quality and operational readiness targets are met. </li></ul>

Electrical Commissioning Manager

Location: Halden, Norway or other locations depending on the site in question Supervisor: Head of Site Purchasing Project: Power Transmission Duration: 12 months   Roles and Responsibilities: <ul><li>Responsible for Local Site Purchasing and Local Vendor Management: reassessment of needs, launch of RFI, RFQ contract designs, implementation and monitoring of continuous improvement plan.</li><li>Supports the definition of the category strategy / Business Units, in line with the vision of the group, their Business Unit, and ensure the alignment of group practices / BU / sites.</li><li>Is the level 1 escalation of PSS operations for the site (s) for which it is responsible (<€ 50,000).</li><li>For Purchases> € 250,000, it is responsible for the Purchasing performance and the implementation of Procurement strategies, contracts and / or agreements negotiated in collaboration with the Group.</li><li>Provide relevant reports to plant manager / site manager related to purchasing activities and performance</li><li>Provide relevant reports to the SPM and Group Purchasing Department on the performance and all the Purchasing activities related to the site</li><li>Responsible for implementation of Nexans Processes and Standard Purchasing</li><li>Responsible for the implementation of transversal Group Purchasing initiatives on his/her perimeter</li><li>Close link with BPO position to support stakeholder needs</li><li>Contribute to the identification and reduction of risks related to purchases</li><li>Challenge the expression of the needs (recasting of the cost, functional analysis, standardization ...)</li><li>Consolidate needs at the appropriate level (global, local)</li><li>Support the definition of a functional specification (decision matrix for information request / quote, etc.)</li><li>Define the panel of suppliers for consultation</li><li>Lead negotiations to select the best supplier</li><li>Manage contracts and their follow-up (customization, deployment, performance evaluation)</li><li>Contribute to the mitigation of claims</li><li>Contribute to supplier market analysis by providing information on local suppliers</li><li>Analyze market trends and establish market benchmarks (customers, competitors, suppliers)</li><li>Establish the cost structure of the solution</li><li>Identify and propose alternative solutions in the panel supplier</li></ul>  Expected results: <ul><li>Perform purchasing as per Purchasing Rules (POM) and General Management Procedures (GMP)</li><li>Use the negotiations tools available to achieve the best deals taking into consideration all parameters, cost, planning, quality, reputation…</li><li>During RFQ, prepare an evaluation of the offers to be presented and discussed with the teams (technical, legal, management...) before placing the order</li><li>When applicable use the evaluation template matrix (TCO) with criteria and weight</li><li>Be aware and try to reach the yearly KPI targets; for example: savings on P&L, cost avoidance, number of e-auctions & LRN, number of CSR scorecards , … to be cascaded by line management in alignment with Coprorate purchasing</li><li>Ensure our supply chain follows our CSR expectations</li><li>Be fair with the suppliers and involve competition in all purchasing processes</li><li>Leading the competitiveness program of his / her plants related to his/her scope and following up the YTD / YEO results</li><li>Run category strategy process (plant specific) and establish the purchasing savings budget to reach the Purchasing savings objectives</li><li>Good coordination with all sites and central team</li><li>Have valid and useful Frame Agreements with details, costs and options for call off</li><li>Always obtain 3 compliant offers to avoid Single Source situation when purchasing above €50 000</li></ul>  Required Skills and Qualifications: <ul><li>Bachelor’s degree within relevant fields</li><li>Minimum 5 years of purchasing experience</li><li>Good negotiation & communication skills</li><li>Fluent in English and Norwegian, both verbal and written</li><li>Competitive and positive mindset</li><li>Very good Excel analysis skills</li><li>Cohesive and adaptive</li><li>Results oriented</li><li>Preferably SAP & Ariba skills</li></ul>

Senior Purchaser

Overhead Linesman – Distribution Networks Location: Northern Ireland We are looking for an experienced Overhead Linesman to join our client’s team on key distribution network projects. If you take pride in safe, steady, hands-on work and want a role where your skills make a real impact, this role will suit you. What you will do <ul><li>Build, repair, and maintain overhead power lines on LV and HV distribution networks</li><li>Install poles, hardware, conductors, stays, and related equipment</li><li>Work as part of a focused crew to deliver work safely and on time</li><li>Respond to faults and carry out emergency repairs when needed</li><li>Follow all safety procedures and keep accurate job records</li></ul>Required skills <ul><li>Solid training and experience in the electricity industry</li><li>Practical experience with overhead line works</li><li>Strong understanding of Health and Safety and how to apply it on site</li><li>Clear communication skills and a strong team approach</li></ul>

Overhead Linesman

As Harbour & Warehouse Team Lead you will supervise a team of four Warehouse Coordinators working a rotation across two directly managed warehouses, rental warehouse facilities, and a directly managed crew boat harbour facility. You will be the scope lead, reporting directly to the Construction Manager/ Deputy Construction Manager.   Your main responsibilities will be: <ul><li>Be a safety leader to the team.</li><li>Direct supervision, teambuilding, and day-to-day tasking of the working team.</li><li>Monday to Friday from 9 am to 5 pm, no rotation.</li><li>Responsibility for the directly managed warehouses in all aspects, e.g. safe job analysis for every activity, forklift management, inventory management, building and facilities management.</li><li>Responsibility for inventory management in the rental warehouse spaces.</li><li>Regular site visits and supervision of team.</li><li>Responsibility for audits, tracking and recertification of PPE stock sign in/out and reporting deficiencies to project leadership.</li><li>Responsibility and management of Connex containers and other rental equipment, ensuring supply meets demand from remote sites.</li><li>Responsibility for audits and tracking of project owned lifting equipment, ensuring compliance with local regulations. Collecting or requesting return of expiring items from remote sites to remain within certification.</li><li>Stakeholder management for rented spaces and other teams that require support.</li><li>Prepare and deliver clear weekly reports to the Construction Manager / Deputy Construction Manager, covering key metrics such as inventory status, team performance, safety observations, issues, and upcoming needs.</li><li>Other tasks at the direction of Construction Manager / Deputy Construction Manager</li></ul>  Mandatory: <ul><li>TWIC card</li><li>Non expired and non-suspended driving license</li><li>Able and willing to work independently</li><li>Organized and meticulous</li></ul>  Preferable: <ul><li>Experience in using/driving a fork truck.</li><li>Flexibility with working hours on occasion.</li></ul>  Recommended relevant education: <ul><li>2 years' experience from similar position.</li><li>Local knowledge</li><li>Slinger / banksman</li></ul> For more information, do not hesitate to get in touch!

Harbour & Warehouse Team Lead

Shift Supervisor  Vessel : TSV Aethra Project: Celtic Mob Date: approx. early of July Duration: approx. 6 weeks Position: Shift Supervisor Mob: Cork SoW: PLB trenching, survey   Required Certificates 1. Valid Medical Fitness Certificate OGUK or STCW 2. Valid Maritime Safety Training Certificate full GWO or Foet Bosiet

Shift Supervisor

Deputy Offshore Manager Vessel : TSV Argo Project: Celtic Mob Date: approx. mid of June Duration: approx. 3 weeks Position: DOM Mob: Cork SoW: PLB trenching, survey Required Certificates 1. Valid Medical Fitness Certificate OGUK or STCW 2. Valid Maritime Safety Training Certificate full GWO or FOET and BOSIET

Deputy Offshore Manager

Electrical QA/QC Engineer – Data Centre Project (Contract) – Denmark Location: Denmark (On-site) Contract Type: Freelance / Contract Duration: Long-term project Start Date: ASAP The Opportunity We are currently seeking an experienced Electrical QA/QC Engineer to join a major hyperscale data centre project in Denmark. This is a fantastic opportunity to work on a high-profile, technically complex project within a fast-growing, mission-critical sector. You will play a key role in ensuring all electrical installations meet the highest standards of quality, compliance, and performance throughout the project lifecycle. Key Responsibilities<ul><li>Implement and manage QA/QC procedures for all electrical works on site</li><li>Review and approve Inspection & Test Plans (ITPs) and method statements</li><li>Conduct site inspections, audits, and quality walkthroughs</li><li>Monitor installation activities to ensure compliance with project specifications, codes, and standards</li><li>Oversee testing & commissioning documentation (FAT, SAT, pre-commissioning)</li><li>Manage and track non-conformance reports (NCRs) and corrective actions</li><li>Liaise with subcontractors, consultants, and client representatives</li><li>Ensure accurate record keeping and QA documentation</li><li>Support project handover and close-out documentation</li></ul>Requirements<ul><li>Proven experience in Electrical QA/QC on data centre or mission-critical projects</li><li>Strong knowledge of electrical systems (LV/MV, UPS, switchgear, generators, etc.)</li><li>Familiarity with international standards (IEC, ISO, etc.)</li><li>Experience with commissioning processes in data centre environments</li><li>Ability to read and interpret technical drawings and specifications</li><li>Excellent communication and stakeholder management skills</li><li>Eligible to work in the EU / Denmark</li></ul>Desirable<ul><li>Previous experience on hyperscale data centre projects</li><li>Relevant electrical qualifications or engineering degree</li><li>Experience with major contractors or EPCs</li></ul>What’s on Offer<ul><li>Competitive day rate</li><li>Long-term contract on a high-profile project</li><li>Opportunity to work with a leading team in the data centre space</li><li>Exposure to cutting-edge, mission-critical infrastructure</li></ul>

Electrical QA/QC

Duration: 1 year Location: Sweden/Denmark/Italy/Germany Role Purpose The Mechanical QA/QC Lead for Europe will oversee all Quality Control activities across multiple project sites within the region. This role ensures that all construction, mechanical, electrical, and commissioning works meet the highest standards of quality, compliance, and client specifications. The successful candidate will act as the primary QC escalation point for European operations, driving consistency, standardisation, and continuous improvement in QC processes. Regional Leadership & Oversight <ul><li>Lead, support, and mentor QC teams across all European project locations.</li><li>Ensure consistent application of QC procedures, inspection processes, and documentation.</li><li>Provide leadership guidance on complex quality issues and NCR/Defect resolution.</li><li>Work closely with Regional Directors, Project Directors, and Quality/Engineering functions.</li></ul>  Quality Control Execution <ul><li>Oversee completion and approval of Inspection & Test Plans (ITPs), Method Statements, and quality checklists.</li><li>Ensure all QC activities are aligned with project specifications, statutory requirements, and client standards.</li><li>Conduct site audits, inspections, and quality walks across all active projects.</li><li>Verify materials, installations, and systems meet compliance and certification requirements.</li></ul>Standards, Processes & Governance <ul><li>Drive harmonisation and standardisation of QC procedures across all European sites.</li><li>Develop regional QC guidance documents, templates, and best-practice playbooks.</li><li>Implement lessons learned and quality improvement initiatives across teams.</li><li>Support internal and external audits, ensuring corrective actions are completed on time.</li></ul>   Quality Reporting & Performance Tracking <ul><li>Ensure accurate and timely QC reporting for each project.</li><li>Track KPIs including: NCR performance, defects, rework trends, audit findings, and close-out compliance.</li><li>Present monthly/quarterly QC updates to senior leadership.</li><li>Support quality related risk assessments and mitigation plans.</li></ul>Client & Stakeholder Liaison <ul><li>Act as regional QC representative for client meetings, audits, and inspections.</li><li>Support buildability reviews, design coordination, and technical workshops.</li><li>Provide early QC input during pre-construction and startup phases.</li></ul>Skills & Experience Required <ul><li>7 years’ experience in Quality Control or Quality Assurance within construction, data centres, MEP, or industrial projects.</li><li>Strong understanding of CSA, Mechanical and commissioning quality requirements.</li><li>Experience leading multi-site or multi country teams.</li><li>Excellent knowledge of inspection processes, ITPs, and QA/QC standards.</li><li>Strong communication skills with ability to influence at all levels.</li><li>Ability to travel regularly across Europe.</li></ul>   Desirable <ul><li>Experience within hyperscale data centre projects.</li><li>Chartered status or relevant engineering qualification.</li><li>Familiarity with digital quality systems (e.g., Procore, BIM 360, Zutec).</li><li>Background working with Tier 1 contractors or global clients.</li></ul>

Mechanical QAQC Lead

Site Contract Manager – Power Plant  Position: Site Contract Manager Start Date: August 2026 Duration: Approx. 3 years Working Hours: 40 hours (Mon–Fri), with potential to increase depending on project demands Role Overview This is a site-based position responsible for managing all commercial and contractual aspects during project execution. The successful candidate will work closely with site and project leadership to identify, mitigate, and manage contractual risks, while ensuring full compliance with contract terms across all stakeholders. Key Responsibilities General Duties<ul><li>Attend site meetings Monday to Friday, with occasional weekend meetings (paid overtime).</li><li>Coordinate and manage commercial matters on-site with the client, consortium partners, and subcontractors.</li><li>Gather and maintain documentation to protect our client’s contractual position and support risk and claims mitigation.</li><li>Communicate any commercial or contractual risks to Site Manager, Project Manager, Site Installation Manager, and Project Contract Manager.</li></ul>Subcontract & Contract Management<ul><li>Establish and maintain event logs, risk registers, and claims registers.</li><li>Prepare notices, claims, counterclaims, and change orders in collaboration with project teams.</li><li>Support the negotiation of claims and variations.</li><li>Manage non-conformance processes and support recovery of back-charges from subcontractors and suppliers.</li><li>Support commercial aspects of site purchasing activities and implementation of agreed procedures with partners.</li><li>Oversee subcontractor payment applications, issuing Payment Certificates and Milestone Certifications.</li></ul>Reporting, Documentation & Compliance<ul><li>Maintain accurate site records, including daily reports, working hours, and claim support documentation.</li><li>Review project progress reports to ensure key commercial risks and events are captured.</li><li>Maintain and organize contract documentation and records, including evidence for claims and delays.</li><li>Prepare, review, and distribute Minutes of Meetings.</li><li>Produce a weekly Contract Management report, covering:<ul><li>Project delays (EPC, client, or third parties)</li><li>Claims status and associated costs</li><li>Insurance events and recovery progress</li><li>Vendor performance and recovery actions</li></ul></li></ul>Risk, Claims & Commercial Oversight<ul><li>Track delays, costs, damages, and scope changes, and develop mitigation plans.</li><li>Monitor contractual milestones and project schedules, identifying deviations.</li><li>Raise and manage delay notices and claim notifications in a timely manner.</li><li>Support the Extra Works process for design changes, repairs, and site modifications.</li><li>Assist in the management of insurance claims, including documentation and coordination with adjusters.</li><li>Provide contractual guidance and interpretation to site teams to ensure compliance.</li></ul>Coordination & Stakeholder Management<ul><li>Attend daily, weekly, and monthly site meetings to identify and capture commercial risks and disputes.</li><li>Coordinate with site teams to identify potential delay or claim scenarios early.</li><li>Escalate risks impacting cost, schedule, or contractual obligations to senior project stakeholders.</li></ul>Key Requirements<ul><li>Degree in Engineering, Quantity Surveying, Law, Business Administration, or equivalent experience.</li><li>10 years’ experience in contract management within large infrastructure or EPC projects.</li><li>Experience in power generation, gas power plants, or substation projects is highly advantageous.</li><li>Strong knowledge of:<ul><li>Contract management & administration</li><li>Claims preparation & dispute resolution</li><li>Variation orders and extension of time (EOT) strategies</li></ul></li><li>Proven experience in high-value contract negotiations.</li><li>Solid understanding of commercial and contract law principles.</li><li>Strong technical awareness of project scope and contractual obligations.</li><li>Excellent communication and stakeholder management skills.</li><li>Good understanding of project risk management, planning, and controls.</li></ul>

Site Contracts Manager - Power Plant 

General Site Manager – Onshore Substation x2 Location: Norfolk/Swindon/London Duration: 30/03/2026 to 30/03/2027 Rotation: Mon-Fri, 40 hours a week Outside IR35 Description: MSP | UK | Client General Site Manager – Onshore Substation The Onshore General Site Manager is to act as the onsite Client Representative during the site initial designs, constructability assessments and planning of the works, prepare for site establishment and later construction of the Onshore Electrical Substation and associated onshore works. Supports the HVDC Package Manager through the construction phase, and manages all aspects of the Client’s site duties under the Contract. The role will co-ordinate the Client Site Representatives and ensure that all site related information is coordinated between the supporting functions within the project. Details: KEY RESPONSIBILITIES: The Onshore General Site Manager is to act as the onsite Client Representative during the site initial designs, constructability assessments and planning and later construction and handover of the works. Supports the HVDC Package Manager through the construction phase, and manages all aspects of the Client’s site duties under the Contract. The role will co-ordinate the client site representatives and and site information within the project. The role will facilitate resolution of site-based issues to ensure that employers risks are mitigated through regular/adhoc meetings, discussions, ensuring adequate recording of such. The role will have support of the Package Manager in representing and resolving site issues with the Contractor’s Senior Management team. The role will be required to have experience in site management of HV substation construction, including technical knowledge of civil engineering, HV Mechanical & Electrical Installations, testing & commissioning of HV systems and cables. All onshore substation site management activities with respect to the onshore works including, Health, Safety, Environment, Security, Maintenance pre-Handover. The role will need to become familiar with the Contracts, Consent Management Plans, Leases, Designs, Construction Phase Health & Safety Plan, package interfaces, the Employers Requirements (specifications) and any relevant contractors documentation in order the manage the site effectively. The role is expected to be experienced in managing relationships with key stakeholders, including National Grid, Associated Works Contractors and Client Senior Management, and will be the Project presence onsite. The role will also support resolution of client programme risk issues, including relating to Package interfaces. Shall provide co-ordination of all site resources within the onshore client site team, supported by the project engineers, quality inspectors, health & safety inspectors, environmental consultants, consents personnel etc. Liaison with the Commissioning Manager who is responsible for operating the HV Safety Rules for all energised plant. Support the interface planning activities with National Grid and the Onshore Cables Team. Reporting to senior leadership and the project as required. Ensure that the Contractor is fulfilling their duties of the Principal Contractor for the onshore substation site under CDM including: Ensure a safe system of work offshore incorporating the HV Safety Rules. Supervise and record all onshore works relevant to the HVDC substation and grid connection ensuring compliance with the defined health, safety, quality and technical standards Design & Implement an effective handover process for the onshore site from construction, commissioning to O&M. DELIVERABLES: Safe delivery of the Electrical transmission system for the project including continued development, construction and handover to operations, closeout of commercial aspects and delivery of all as built documentation for all associated packages KEY QUALIFICATIONS: A degree in Engineering or equivalent experience Site Management Safety Training Scheme (SMSTS) or equivalent required. High level safety qualifications such as NEBOSH would be an advantage MUST HAVE QUALIFICATION/EXPERIENCE: Extensive experience as a Site Manager role on HV substation construction projects including the integration of equipment throughout the build construction and installation process A proven track record in civil engineering, and HV substation site construction management An excellent understanding of the range of available civil engineering techniques, including HDD with a practical approach to implementation. Business proficient in English Role is site based and expectation is that the role is performed therefore at the site location NOTE: This JP has 2 positions, one for each of the below locations: NO ADDITIONAL TRAVEL COSTS TO/FROM THE BASE LOCATIONS MAY BE CHARGED Position 1. Base location Necton Onshore Substation, Swaffham, Norfolk. PE37 8EG. Travel also required to Swindon office, London Project Office and Coventry Office as required. Position 2: The base location will initially be the London DBS offices and will then change to the Onshore Substation site (TBA) when site activities commence with travel to London, Swindon and Coventry offices or other locations as required. Comments from MSP: KEY RESPONSIBILITIES CONTINUED: Ensure a safe system of work offshore incorporating the HV Safety Rules Supervise and record all onshore works relevant to the HVDC substation and grid connection ensuring compliance with the defined health, safety, quality and technical standards Design & Implement an effective handover process for the onshore site from construction, commissioning to O&M Deliverables Safe delivery of the Electrical transmission system for the project including continued development, construction and handover to operations, closeout of commercial aspects and delivery of all as built documentation for all associated packages" Key Qualifications A degree in Engineering or equivalent experience Site Management Safety Training Scheme (SMSTS) or equivalent required High level safety qualifications such as NEBOSH would be an advantage" Must have Qualification / Experience Extensive experience as a Site Manager role on HV substation construction projects including the integration of equipment throughout the build construction and installation process A proven track record in civil engineering, and HV substation site construction management An excellent understanding of the range of available civil engineering techniques, including HDD with a practical approach to implementation Business proficient in English Role is site based and expectation is that the role is performed therefore at the site location

General Site Manager

Annual Service BKR02 2026 (279229) Project Name: Annual Service BORKUMRIFFGRUND 02 2026 Duration: 17-Jun-2026 - 26-Aug-2026 (options to extend) Business Unit: Operations Type: AUG German Employed Contract ONLY (no freelance allowed) Rotations: 2 weeks on. 2 weeks off Rate: 62EUR an hour Description: The Consultant must bring his/her own PC and/or Iphone. External consultants’ equipment such as PCs, mobile phones and iPads must always be up-to-date with the latest iOS release. The owner must allow Ørsted’s AirWatch security and management software for iPhones and iPads to be installed. The app is mandatory on all mobile devices used by Ørsted staff (including External consultants) to protect them from cybercrime. The owner must grant approval for Ørsted to remove apps, data and access from privately owned equipment if it is deemed to pose a risk in relation to Ørsted’s security or the GDPR regulations, if the equipment is lost/stolen, or if the owner ceases to have an active contract with Magnit and/or Ørsted. When an external consultant leaves Ørsted, they must contact the IT Service Desk to remove all Ørsted apps and data. The IT Service Desk can only support privately owned equipment in connection with Ørsted’s AirWatch security and management software. Mi 6,00 onsigning Do 12,00 work Fr 12,00 work Sa 12,00 work So 12,00 work Mo 12,00 work Di 12,00 work Mi 12,00 work Do 12,00 work Fr 12,00 work Sa 12,00 work So 12,00 work Mo 12,00 work Di 12,00 work Mi 6,00 offsigning 168,00 total/rotation Requirements: AUG contracts only BKR02 consists of 56 Turbines, V164, 8.0 MW. The operation takes place on board our Service Operation Vessel (SOV), Portcall harbor is Emden. Standard PPE is to be brought by the consultant (Life-Vest with PLB, Survival Suit, Safety Boots S3 (ankle high), high-vis workwear, helmet, harness/lanyards, Avanti Glider AL04. A complete list of PPE requirements can be provided if required. Minimum Competency Requirements: Competent Technician: GWO- Working at heights (only valid for 12 months in Germany!) Advanced Rescue Training Enhanced first aid Sea Survival Manual handling Fire Awareness BTT Medical fitness certificate incl. chester step test Generic crane user training Avanti Lift User Training EUP WTSR Core Course Any Vestas certifications

Service Technician

EHS Advisor – Data Centre Construction Location: Mons, Belgium Sector: Data Centres / Mission-Critical Construction Employment Type: Permanent About the Role A leading international construction and engineering contractor is seeking an Environmental, Health & Safety (EHS) Advisor to support major data centre construction projects in Belgium. Working closely with Project Managers and the wider EHS team, you’ll play a key role in ensuring projects are delivered safely, responsibly, and in full compliance with statutory requirements. You’ll be hands-on across site activities, helping to embed a proactive safety culture while supporting high standards of environmental and occupational safety performance. This is an excellent opportunity for an EHS professional looking to develop their experience within mission-critical, fast-paced construction environments. Key Responsibilities<ul><li>Support the implementation of the company’s EHS policies to prevent injury, ill health, environmental harm, and damage</li><li>Promote a proactive safety culture across construction sites</li><li>Ensure compliance with local and statutory EHS requirements</li><li>Carry out regular site safety inspections, audits, and reporting</li><li>Track and ensure close‑out of corrective actions within agreed timescales</li><li>Support accident and incident investigations, including reporting and follow-up actions</li><li>Ensure all site operatives and subcontractors receive appropriate inductions</li><li>Monitor welfare facilities, site setup, and statutory notice displays</li><li>Review risk assessments and method statements (RAMS) for suitability</li><li>Ensure permit-to-work systems are correctly implemented</li><li>Monitor COSHH compliance and environmental protection measures</li></ul> Key Requirements<ul><li>Relevant qualification in Health & Safety, Environmental Management, or a related discipline</li><li>NEBOSH Certificate (or equivalent)</li><li>Proven EHS experience within construction environments</li><li>Knowledge of statutory health, safety, and environmental regulations</li><li>Experience conducting site inspections, audits, and investigations</li><li>Confident working with project teams and site management</li><li>Strong communication and organisational skills</li><li>Ability to work across live, fast-track construction sites</li></ul> Why Apply?<ul><li>Work on high-profile data centre and mission-critical projects</li><li>Gain exposure to complex, technically challenging builds</li><li>Join a growing European project portfolio</li><li>Clear progression opportunities within the EHS function</li><li>Stable, long-term project pipeline in Belgium</li></ul>

EHS Advisor

COMPANY SITE REPRESENTATIVE (Barge / Vessel Client Representative / Lead)** Qualifications <ul><li>Minimum BSc (Honours) in Mechanical Engineering or equivalent</li></ul>Experience <ul><li>Minimum 15 years total offshore Oil & Gas experience</li><li>Minimum 10 years’ experience in offshore construction projects including:<ul><li>Jacket installation</li><li>Decks and bridges</li><li>Subsea cables</li><li>Pipelines and risers</li><li>Hook-up and tie-ins</li><li>Pre-commissioning and commissioning</li></ul></li><li>Experience gained on:<ul><li>Offshore construction vessels</li><li>Self-elevating barges</li><li>Derrick and lay barges</li></ul></li></ul>Technical Knowledge <ul><li>Offshore construction practices</li><li>Marine and safety regulations</li><li>QA/QC</li><li>Welding and coating</li><li>Jacket and deck installation procedures</li><li>Anchor handling and barge movements</li><li>Survey, navigation, and positioning systems</li><li>Pipe laying, cable laying, and riser installation</li><li>Hook-up and tie-ins for piping, E&I</li><li>System and equipment commissioning</li><li>Familiarity with:<ul><li>SOLAS</li><li>MODU</li><li>ADNOC HSE Standards</li><li>ADNOC Offshore marine standards</li></ul></li></ul>Core Responsibilities <ul><li>Act as Project focal point and represent the Project Management Team during offshore installation campaigns</li><li>Report to ADNOC Offshore Project Team Leader (Abu Dhabi)</li><li>Act as main communication link with contractors, TPA, and Operations field personnel</li><li>Liaise closely with ADNOC Offshore Marine Representative</li><li>Ensure approved construction procedures are strictly followed</li><li>Obtain formal approval for any changes via Project MOC procedures</li><li>Develop risk mitigation measures based on risk assessments</li><li>Supervise and monitor contractors’ daily work activities</li><li>Review contractor variation and change-order requests and report impacts</li><li>Be responsible for all assigned ADNOC Offshore site team members</li><li>Produce:<ul><li>Daily progress reports</li><li>Accident/incident reports</li><li>Safety and improvement recommendations</li></ul></li><li>Sign Contractor Daily Progress Reports with comments</li><li>Ensure compliance with HSE, QA, and company standards</li><li>Conduct safety meetings, toolbox talks, and safety drills</li><li>Be familiar with emergency response plans (evacuation, medevac, etc.)</li><li>Produce a Close-Out Report upon assignment completion, including lessons learned</li><li>WMS approved</li></ul>

COMPANY SITE REPRESENTATIVE

Provision of a competent ADNOC Offshore Logistics (Marine / HSE) approved Marine Advisor to act as the COMPANY marine representative, experienced in offshore installation works. Responsibilities <ul><li>Conduct marine vessel inspections (Marine / HSE)</li><li>Attend Marine LD main office for routine daily work, including:<ul><li>Vessel monitoring</li><li>Preparation of Scope of Work (SOW) and specifications for vessel tenders</li><li>Reviewing risk assessments</li><li>Participating in technical evaluations for vessels</li><li>Conducting contractor audits (ISM and ASMC)</li></ul></li><li>Witness and monitor marine operations related to offshore lifts and installation activities</li><li>Participate in and conduct incident investigations</li><li>Provide technical and practical marine advice to contractor marine key personnel</li><li>Verify that all marine and operational documentation complies with ADNOC Offshore standards</li><li>Prepare all required reports</li><li>Participate in emergency management and ensure timely reporting to focal points</li><li>Ensure implementation of HSE marine-related rules</li></ul>Education & Qualifications <ul><li>One of the following:<ul><li>Unlimited Class 1 Master Mariner Certificate of Competence (STCW 1995 & amendments) from a white list country</li><li>BSc Degree in Maritime Discipline or equivalent</li></ul></li><li>Strong computer skills and experience in report writing</li><li>Very good command of written and spoken English</li></ul>Experience Requirements <ul><li>Minimum 10 years’ experience in offshore Oil & Gas, serving as Master on vessels such as:<ul><li>PSV</li><li>AHTS</li><li>Heavy Lift</li><li>Dive</li><li>Construction</li><li>Pipe Lay</li><li>Cable Lay</li><li>DP and conventional vessels</li></ul></li><li>Familiarity with:<ul><li>ADNOC Offshore fields</li><li>SIMO</li><li>ASMV</li><li>ASMC</li><li>JUIMS</li></ul></li><li>Prior experience in ADNOC Offshore oil fields</li></ul>

MARINE ADVISOR

Cable Lay Superintendent – Senior Duration: 25/5/2026 – 31/7/2026 Location: International Waters Project: Coastal Virginia Offshore Wind Farm Vessel: Living Stone (NL) Rate: Candidate expectations     Description:   Client information  This client is a world leader in the highly specialised fields of dredging, solutions for the offshore energy market, infra marine and environmental works. With more than 140 years of experience and 5,200 highly skilled professionals, we bring tailor-made solutions, innovation and new technologies to our customers’ projects, ensuring that they are performed safely, efficiently and cost-effectively.  Department Description and responsibilities   Offshore is a global solutions provider in the offshore oil, gas and renewables industry. We have an unrivalled track record in the transport and installation of foundations, turbines, inter-array cables, export cables and substations for offshore wind farms. In the oil & gas industry we are experts in landfalls and civil works, rock placement, heavy lift, umbilicals and installation and decommissioning services. By operating a high-tech and versatile fleet of vessels we offer flexible solutions for the most complex offshore energy projects. Primary Tasks and responsibilities   -Make sure all cable related operations are done in the most safe and optimal way.  -Lead a team of 10 to 15 members (foremen and operators).  -Hold the shift handover meetings with the team onboard.  -Liaise with colleagues on the bridge and surveyors for an optimal cable operation.  -Run and supervise all operations on the back-deck. This includes the operability of the Cable, installation System (CIS), ROVs, cranes and other equipment onboard.  -Make sure works are performed with the highest level of safety.  -Take care of the integrity of the cable during loading, transporting and installation phases.  -Do a daily log of activities performed.  -Assume responsibility for overseeing the cable installation process, ensuring precise, secure cable placement, and upholding the highest quality and performance standards.  -Utilize your technical acumen to identify and resolve complex technical challenges that may arise during cable installation, ensuring the seamless progress of projects.  -OIM is single point of contact but the Cable Lay Superintendents have daily contact with the client representatives during the operations and to answer questions about the progress and technical questions  Technical profile requirements   - 7 years of experience in submarine cable installation, demonstrated through several years of experience in senior technician or similar roles.  -Safety Focus: A strong commitment to prioritizing safety and adhering to safety protocols and guidelines.  -Leadership Excellence: Proven leadership abilities and exceptional communication skills to effectively manage and lead a diverse team.  Non-Technical profile requirements   -Strong communication skills  -Good knowledge & experience with MS Office  -Good command of English, both written and spoken  -Fit for Offshore work.  Methodology/Certification requirements   -MSC/MSc Degree in Civil Engineering, Mechanic Engineering, Chemical Engineering OR equivalent through experience. Certifications required -Valid US Visa or B1 OCS Wind (!) Visa -Full GWO -Offshore medical -VCA/SCC Language proficiencies   -Fluent speaking and writing English, proficiency in other languages is a major plus

Cable Lay Superintendent

Role Overview Design Manager, you will lead the full design process across the entire project lifecycle, ensuring design excellence from concept through construction and final handover. This role is central to aligning client expectations, technical compliance, construction delivery, and commercial objectives. You will serve as the key point of coordination between clients, consultants, subcontractors, BIM teams, and internal delivery teams, ensuring all design information is accurate, timely, compliant, and fully integrated into project execution. This position is ideal for an experienced construction or engineering professional with strong leadership capabilities, technical expertise, and a proven ability to manage multidisciplinary design teams on complex projects. Key Responsibilities Design Leadership & Stakeholder Coordination<ul><li>Lead and manage all design activities throughout project planning, development, construction, and closeout</li><li>Coordinate architects, engineers, consultants, subcontractors, and internal teams to ensure seamless design integration</li><li>Act as the primary contact for all design-related communication between project stakeholders</li><li>Chair and facilitate design coordination meetings, workshops, and technical reviews</li><li>Ensure design intent is maintained while balancing budget, programme, and buildability requirements</li><li>Promote collaboration across all disciplines to reduce conflicts and improve project outcomes</li></ul>Programme Management & Design Deliverables<ul><li>Develop and manage the design delivery schedule in line with overall project milestones</li><li>Monitor progress of design packages, identifying risks, delays, and resource challenges early</li><li>Ensure all drawings, specifications, and technical documentation are issued on time</li><li>Manage design revisions, technical queries, and change control processes to minimise disruption to site activities</li><li>Support procurement and construction teams with timely and coordinated technical information</li></ul>Quality Assurance & Regulatory Compliance<ul><li>Ensure all design outputs meet client specifications, contractual obligations, and project quality standards</li><li>Review and approve design submissions including construction drawings, shop drawings, technical submittals, and consultant packages</li><li>Verify compliance with Belgian, European, and relevant international building regulations</li><li>Oversee adherence to fire safety, building physics, structural integrity, and technical performance requirements</li><li>Drive continuous improvement in design quality, coordination standards, and document control</li></ul>BIM & Digital Design Coordination<ul><li>Co-lead BIM coordination alongside digital engineering teams</li><li>Support implementation of BIM workflows, clash detection, and model integration</li><li>Promote efficient use of digital design tools, project management systems, and collaborative platforms</li><li>Ensure design data is structured, coordinated, and accessible for all project stakeholders</li><li>Champion innovation in digital construction and design processes</li></ul>Construction Phase Support<ul><li>Provide technical design leadership during live construction activities</li><li>Conduct site visits and inspections to ensure accurate design implementation</li><li>Resolve on-site design issues, RFIs, and technical challenges efficiently</li><li>Coordinate design updates in response to site conditions or project changes</li><li>Manage the preparation and completion of As-Built documentation and handover packages</li></ul>Reporting & Project Visibility<ul><li>Prepare weekly and monthly design progress reports for senior leadership and clients</li><li>Track design KPIs, programme milestones, technical risks, and mitigation actions</li><li>Provide clear reporting on commercial, technical, and delivery impacts of design decisions</li><li>Support strategic project planning through data-driven design performance insights</li></ul>Required Skills & Experience Education & Professional Background<ul><li>Degree in Architecture, Civil Engineering, Structural Engineering, Building Services, MEP, or a related discipline</li><li>Significant experience in Design Management, Senior Design Coordination, or Technical Project Leadership within construction, infrastructure, or engineering sectors</li><li>Demonstrated success delivering multidisciplinary projects in complex environments</li></ul>Technical Expertise<ul><li>Strong knowledge of construction methods, sequencing, materials, and detailing</li><li>In-depth understanding of building regulations, fire safety, technical compliance, and quality standards</li><li>Proficiency in BIM, CAD, and digital coordination tools</li><li>Experience with design management systems, project controls, and document management platforms</li><li>Ability to integrate technical, commercial, and operational priorities</li></ul>Leadership & Communication Skills<ul><li>Exceptional stakeholder management and team leadership abilities</li><li>Strong communication, negotiation, and presentation skills</li><li>Highly organised with excellent problem-solving capabilities</li><li>Commercially aware with a practical understanding of project constraints</li><li>Able to manage complexity, change, and competing priorities in fast-paced environments</li></ul>Additional Requirements<ul><li>Fluency in English is essential</li><li>Dutch and/or French language skills are advantageous</li><li>EU work authorisation is required</li></ul>

Design Manager

EHS Lead – Data Centre Construction Location: Belgium Sector: Mission-Critical / Data Centre Construction Employment Type: Permanent About the Role An international construction and engineering contractor is seeking an experienced Environmental Health & Safety (EHS) Lead to support large-scale, mission-critical data centre projects across Belgium. This is a senior site-based leadership role, responsible for driving best-in-class EHS performance across complex, fast-paced construction environments. You’ll act as the EHS authority on site, influencing project teams, clients, and supply-chain partners while embedding a proactive, behavioural safety culture from pre-construction through commissioning and handover. This role goes beyond compliance — it’s about leadership, visibility, and raising standards on some of Europe’s most technically demanding projects. Key Responsibilities Leadership & Safety Culture <ul><li>Lead and champion a proactive, high-performance safety culture on site</li><li>Provide guidance and leadership to EHS Advisors and wider project teams</li><li>Act as the senior EHS point of contact for project leadership and client representatives</li><li>Drive continuous improvement and behavioural safety initiatives</li></ul> Operational Delivery <ul><li>Oversee all EHS activities on high-risk data centre construction sites</li><li>Ensure robust implementation of RAMS, permit-to-work systems, and safe systems of work</li><li>Carry out site inspections, audits, and safety walks, driving timely close-out of actions</li><li>Support safe planning and execution of high-risk activities (lifting operations, energisation, confined spaces, commissioning)</li><li>Ensure effective inductions, toolbox talks, and training programmes</li></ul> Governance & Compliance <ul><li>Ensure compliance with local, EU, and international EHS legislation</li><li>Maintain ISO 45001, ISO 14001, and internal EHS management systems</li><li>Lead incident investigations, root cause analyses, and corrective actions</li><li>Deliver accurate EHS reporting to internal and external stakeholders</li></ul> Stakeholder & Client Engagement <ul><li>Act as a key interface with clients on EHS matters</li><li>Influence subcontractors and supply chain partners to meet stringent safety standards</li><li>Participate in audits, inspections, and regulatory engagement</li></ul> Key Requirements<ul><li>Degree-qualified in Occupational Health & Safety, Environmental Science, Engineering, or similar</li><li>NEBOSH Diploma (or equivalent Level 6 qualification)</li><li>7–10 years’ EHS experience within construction or technical project environments</li><li>Proven data centre construction experience (essential)</li><li>Strong knowledge of high-risk construction activities in mission-critical environments</li><li>In-depth understanding of EU and local EHS legislation</li><li>Experience implementing ISO 45001 & ISO 14001</li><li>Confident communicator with strong stakeholder management skills</li><li>Fluent English required (Dutch and/or French advantageous)</li></ul> Why Apply?<ul><li>Work on major, high-value mission-critical data centre projects</li><li>Take ownership of EHS on complex, fast-track builds</li><li>Join a growing international contractor with a strong pipeline across Europe</li><li>High visibility role with real influence on project outcomes and safety culture</li></ul>

EHS Lead

Protection & Controls Technician (Substation Testing & Commissioning) Location: Nationwide (U.S. – 100% Travel) Position Overview: We are seeking a highly skilled Protection & Controls (P&C) Technician to support substation testing and commissioning projects across the United States. This role is fully travel-based and requires extensive fieldwork supporting new construction, upgrades, and maintenance of high-voltage substations. The ideal candidate will have strong experience in relay testing, control systems, and commissioning activities within utility or EPC environments and be comfortable working in dynamic, fast-paced field conditions. Key Responsibilities<ul><li>Perform testing, commissioning, and maintenance of protection and control systems in substations (up to 765kV or as applicable)</li><li>Conduct functional testing of protective relays, including SEL, GE, ABB, Siemens, and other OEM devices</li><li>Execute end-to-end commissioning activities, including:<ul><li>Point-to-point wiring checks</li><li>Control circuit verification</li><li>SCADA and communications testing</li><li>Breaker timing and functional checks</li></ul></li><li>Interpret and work from schematics, wiring diagrams, and logic drawings</li><li>Perform relay settings verification and implementation</li><li>Carry out troubleshooting and diagnostics on P&C systems, resolving issues efficiently in the field</li><li>Support energization and system turn-over activities</li><li>Ensure compliance with safety standards, company procedures, and client requirements</li><li>Document testing results, produce commissioning reports, and maintain accurate field records</li><li>Collaborate with project engineers, utility clients, and field teams to deliver projects on schedule</li></ul>Required Qualifications<ul><li>3 years of experience in protection & controls, substation testing, or commissioning</li><li>Associate’s degree or technical certification in Electrical Engineering Technology or related field</li><li>Experience working with major utilities or EPC contractors</li><li>Hands-on experience with protective relay testing equipment</li><li>Strong understanding of:<ul><li>Substation protection schemes (line, transformer, bus, feeder protection)</li><li>Electrical fundamentals and power systems</li></ul></li><li>Ability to read and interpret electrical drawings and relay logic</li><li>Valid driver’s license and ability to travel extensively (100%)</li><li>Strong commitment to safety practices and procedures</li></ul>

Protection & Controls Technician

Protection & Controls Technician (Substation Testing & Commissioning) Location: Nationwide (U.S. – 100% Travel) Position Overview: We are seeking a highly skilled Protection & Controls (P&C) Technician to support substation testing and commissioning projects across the United States. This role is fully travel-based and requires extensive fieldwork supporting new construction, upgrades, and maintenance of high-voltage substations. The ideal candidate will have strong experience in relay testing, control systems, and commissioning activities within utility or EPC environments and be comfortable working in dynamic, fast-paced field conditions. Key Responsibilities<ul><li>Perform testing, commissioning, and maintenance of protection and control systems in substations (up to 765kV or as applicable)</li><li>Conduct functional testing of protective relays, including SEL, GE, ABB, Siemens, and other OEM devices</li><li>Execute end-to-end commissioning activities, including:<ul><li>Point-to-point wiring checks</li><li>Control circuit verification</li><li>SCADA and communications testing</li><li>Breaker timing and functional checks</li></ul></li><li>Interpret and work from schematics, wiring diagrams, and logic drawings</li><li>Perform relay settings verification and implementation</li><li>Carry out troubleshooting and diagnostics on P&C systems, resolving issues efficiently in the field</li><li>Support energization and system turn-over activities</li><li>Ensure compliance with safety standards, company procedures, and client requirements</li><li>Document testing results, produce commissioning reports, and maintain accurate field records</li><li>Collaborate with project engineers, utility clients, and field teams to deliver projects on schedule</li></ul>Required Qualifications<ul><li>3 years of experience in protection & controls, substation testing, or commissioning</li><li>Associate’s degree or technical certification in Electrical Engineering Technology or related field</li><li>Experience working with major utilities or EPC contractors</li><li>Hands-on experience with protective relay testing equipment</li><li>Strong understanding of:<ul><li>Substation protection schemes (line, transformer, bus, feeder protection)</li><li>Electrical fundamentals and power systems</li></ul></li><li>Ability to read and interpret electrical drawings and relay logic</li><li>Valid driver’s license and ability to travel extensively (100%)</li><li>Strong commitment to safety practices and procedures</li></ul>

Protection & Control Technician

Senior Authorised Person (Electrical) We are looking for an experienced Senior Authorised Person to lead electrical safety on complex engineering and construction projects. The role is responsible for managing HV/MV/LV systems, including safe isolation, energisation, switching, and enforcing electrical safety procedures such as lock-out/tag-out and permit-to-work systems. You will ensure compliance with all safety rules, review risk assessments and method statements, manage arc flash and electrical hazards, and oversee commissioning activities through to energisation. Key requirements include: <ul><li>Qualified electrician with relevant certification</li><li>Experience with HV/MV/LV switching and testing</li><li>Strong knowledge of electrical safety systems and regulations</li><li>Ability to manage high-risk activities and lead teams</li><li>Competence in fault finding, testing, and commissioning processes</li></ul>

Senior Authorised Person

We are seeking an experienced LV/MV Authorised Person to support complex construction and engineering projects in Munich, working on large-scale data centre and industrial developments. Role overview You will be responsible for the safe control of electrical works on site, including switching, isolations, energisations, and permit-to-work systems within a live project environment. Key responsibilities<ul><li>Enforce Electrical Safe Systems of Work (ESSOW), PTW, LOTO, and COHE procedures</li><li>Manage safe switching, isolations, and energisation activities (LV/MV)</li><li>Review and approve RAMS and subcontractor electrical documentation</li><li>Support commissioning, testing, and inspection activities</li><li>Ensure compliance with safety procedures and site regulations</li><li>Identify hazards and implement control measures</li><li>Maintain clear communication with site and engineering teams</li><li>Assist with incident reporting and investigations</li></ul>Requirements<ul><li>Qualified electrician </li><li>Strong experience with LV/MV systems and infrastructure projects</li><li>Background in data centres, power, or industrial environments</li><li>Experience with testing, commissioning, and switching operations</li><li>Knowledge of EN standards and local electrical regulations</li><li>MV switching experience (where applicable)</li><li>Strong understanding of electrical drawings and systems</li></ul>

Authorised Person 

Mechanical & Piping Estimator / Kalkulator Frankfurt, Germany | Data Centers & Life Sciences Projects Are you an experienced Mechanical & Piping Estimator looking to work on some of Europe’s most complex and technically advanced projects? We are supporting a fast‑growing, international construction organisation delivering high‑tech facilities across the Life Sciences and Data Center sectors. With a strong footprint across Germany and Switzerland, this business is known for delivering sophisticated, mission‑critical projects using a highly collaborative and engineering‑led approach. Due to continued growth, they are seeking a Mechanical and Piping Estimator / Kalkulator to strengthen their preconstruction team in Frankfurt. The Role  As a Mechanical & Piping Estimator, you will play a key role in shaping project success from early concept through to final construction documentation. Key responsibilities include: <ul><li>Developing conceptual budgets and detailed cost estimates for Mechanical & Plumbing works</li><li>Preparing independent cost estimates, tenders, financial analyses, and pricing strategies</li><li>Reviewing technical drawings and specifications, ensuring scope alignment across MEP systems (HVAC, Electrical, Fire Protection, BMS/BAS, EPMS)</li><li>Driving Value Engineering initiatives and identifying cost‑saving opportunities</li><li>Leading communication with MEP subcontractors, suppliers, and vendors</li><li>Supporting procurement and tendering, including commercial evaluation and negotiations</li><li>Collaborating with preconstruction and design teams to manage risk, scope clarity, and cost certainty</li></ul>What We’re Looking For<ul><li>Apprenticeship or degree in engineering or a related technical discipline</li><li>Fluent German and English (written and spoken)</li><li>5 years’ experience in Mechanical & Plumbing estimating</li><li>Background in Data Centers, Life Sciences, Pharmaceutical, or Advanced Technology projects</li><li>Strong knowledge of local German standards, market norms, and supply chain</li><li>Experience using cost estimating, quantity take‑off, CAD, and MS Office tools</li><li>A structured, analytical working style with excellent communication skills</li><li>Ability to manage multiple preconstruction workflows in a dynamic environment</li></ul>Why Apply?<ul><li>Work on technically challenging, high‑profile projects</li><li>Be part of a collaborative, international project delivery team</li><li>Strong pipeline of work across Germany and Europe</li><li>Opportunity to influence projects early and add real value through preconstruction expertise</li><li>Long‑term career growth within a stable and expanding organisation</li></ul>

Estimator (Mechanical)

Salary: £55-60k per year The Opportunity We are looking for an experienced CSA Quantity Surveyor to join our project team in the UK. The successful applicant will work closely with the project leadership team and wider Commercial department to ensure the successful delivery of the project for our clients and stakeholders.   Key Tasks <ul><li>Provide commercial and contractual administration support to the Commercial Manager.</li><li>Undertaking internal valuations and production of cost reports</li><li>Supporting the management of applicable subcontract packages and overseeing payments to subcontractors, suppliers and consultants</li><li>Preparing remeasures and variations for submission and follow on agreement with our clients</li><li>Reporting on project budgets and variations</li><li>Distribute and track invoices to various project owners/leads for approval</li><li>Respond to and resolve enquiries from Suppliers, Procurement, and Finance departments (including monthly accruals) in a professional and timely manner</li></ul>Key Qualifications Required: <ul><li>A CSA or tertiary qualification in Quantity Surveying, Engineering, or a similar field.</li><li>A minimum of 3 years of post-graduate experience in the construction sector.</li><li>Strong analytical skills and ability to clearly present findings.</li><li>High level of computer literacy, with experience using relevant estimating software.</li><li>Good communication skills for internal and external liaison.</li><li>Ability to achieve demanding time and quality targets.</li><li>Meticulous approach to take-offs and pricing to ensure accuracy.</li></ul>

CSA Quantity Surveyor

Mechanical Design Engineer – Senior ASAP to end of the year (options to extend) Olen, Belgium   Your task is to participate in engineering projects for the site facilities and the different business units EOM & CSM to modernize, adapt and expand their hydro- and pyrometallurgical production facilities on the Olen site.   Primary tasks & responsibilities <ul><li>Translate client requirements into a technical design for equipment, piping, and mechanical components of an installation.</li><li>Provide input and coordinate the drawing of PFDs and P&IDs by a drafter.</li><li>Design layout plans, mechanical structures, and components in 3D, create detailed drawings, or coordinate the drafting by a drafter.</li><li>Prepare piping specifications (including isometrics).</li><li>Perform basic calculations (pipe resistance, pump calculations, pipe sizing, determining PED class, heat capacity, etc.).</li><li>Provide advice for risk analyses and ensure the implementation of measures in the design.</li><li>Prepare specifications/requirement books for bidding and execution files.</li><li>Participate in procurement activities related to projects (from inquiry, through ordering and delivery, to completion and invoicing).</li><li>Prepare budgets and contribute to planning for your discipline.</li><li>Respect agreed quality, deadlines, and budgets.</li><li>Discuss the construction file with site managers regarding project realization and provide technical support during execution and startup of the project.</li><li>Maintain contacts with internal clients and external partners/contractors.</li><li>Monitor the quality of work delivered by external partners/contractors.</li><li>Archive documents and ensure an as-built technical construction file is maintained.</li></ul>  Technical Profile Requirements: <ul><li>Bachelor’s or Master’s degree in Mechanics or Electromechanics or equivalent through experience.</li><li>5 years of relevant experience in designing process installations in an industrial environment.</li><li>Experience with AutoCAD and ACAD Plant 3D software (experience with Revit, Inventor, or other programs is a plus).</li><li>Experience in setting up 3D layouts is a plus.</li><li>Operational knowledge of legal regulations and guidelines (PED, ATEX, VLAREM, etc.) is a plus.</li><li>Basic knowledge of chemistry, electricity, and automation, along with necessary material knowledge.</li></ul>  Non-Technical Profile Requirements: <ul><li>Skilled in analyzing, reporting, organizing, and solving technical issues.</li><li>A team player with strong communication and social skills.</li><li>Proficient in using office software packages.</li></ul>  Certifications <ul><li>VCA is mandatory</li></ul>  Language proficiencies <ul><li>Fluent in Dutch & English</li><li>Basic knowledge of German & French</li></ul>  Location <ul><li>Olen</li><li>On site presence is mandatory.</li><li>Ad hoc home work can be approved by the hiring manager upon request.</li></ul>  Contract <ul><li>First contract till EOY</li><li>extension possible</li></ul>  Interviews <ul><li>First interview via teams: 30-45min.</li><li>2nd interview onsite at Olen</li></ul>

Mechanical Design Engineer

ASAP to end of the year (options to extend) Olen, Belgium   Your task is to participate in engineering projects for the site facilities and the different business units EOM & CSM to modernize, adapt and expand their hydro- and pyrometallurgical production facilities on the Olen site.   Primary tasks & responsibilities <ul><li>Translate client requirements into a technical design for equipment, piping, and mechanical components of an installation.</li><li>Provide input and coordinate the drawing of PFDs and P&IDs by a drafter.</li><li>Design layout plans, mechanical structures, and components in 3D, create detailed drawings, or coordinate the drafting by a drafter.</li><li>Prepare piping specifications (including isometrics).</li><li>Perform basic calculations (pipe resistance, pump calculations, pipe sizing, determining PED class, heat capacity, etc.).</li><li>Provide advice for risk analyses and ensure the implementation of measures in the design.</li><li>Prepare specifications/requirement books for bidding and execution files.</li><li>Participate in procurement activities related to projects (from inquiry, through ordering and delivery, to completion and invoicing).</li><li>Prepare budgets and contribute to planning for your discipline.</li><li>Respect agreed quality, deadlines, and budgets.</li><li>Discuss the construction file with site managers regarding project realization and provide technical support during execution and startup of the project.</li><li>Maintain contacts with internal clients and external partners/contractors.</li><li>Monitor the quality of work delivered by external partners/contractors.</li><li>Archive documents and ensure an as-built technical construction file is maintained.</li></ul>  Technical Profile Requirements: <ul><li>Bachelor’s or Master’s degree in Mechanics or Electromechanics or equivalent through experience.</li><li>5 years of relevant experience in designing process installations in an industrial environment.</li><li>Experience with AutoCAD and ACAD Plant 3D software (experience with Revit, Inventor, or other programs is a plus).</li><li>Experience in setting up 3D layouts is a plus.</li><li>Operational knowledge of legal regulations and guidelines (PED, ATEX, VLAREM, etc.) is a plus.</li><li>Basic knowledge of chemistry, electricity, and automation, along with necessary material knowledge.</li></ul>  Non-Technical Profile Requirements: <ul><li>Skilled in analyzing, reporting, organizing, and solving technical issues.</li><li>A team player with strong communication and social skills.</li><li>Proficient in using office software packages.</li></ul>  Certifications <ul><li>VCA is mandatory</li></ul>  Language proficiencies <ul><li>Fluent in Dutch & English</li><li>Basic knowledge of German & French</li></ul>  Location <ul><li>Olen</li><li>On site presence is mandatory.</li><li>Ad hoc home work can be approved by the hiring manager upon request.</li></ul>  Contract <ul><li>First contract till EOY</li><li>extension possible</li></ul>  Interviews <ul><li>First interview via teams: 30-45min.</li><li>2nd interview onsite at Olen</li></ul>

Senior Mechanical Design Engineer

Project Scheduler – CCPP (EPC Power Projects) EarthStream Global is currently recruiting for an experienced Project Scheduler to support the delivery of large‑scale Combined Cycle Power Plant (CCPP) projects. This role is suited to a planning professional with a strong background working on EPC power generation projects, providing schedule control, analysis, and reporting across all project phases. The Project Scheduler will play a key role in supporting project management teams by developing, maintaining, and analysing detailed project schedules to ensure programme milestones are achieved. Key Responsibilities<ul><li>Develop, maintain, and manage fully integrated EPC project schedules for CCPP projects from design through commissioning.</li><li>Establish and maintain Level 3 and Level 4 schedules covering engineering, procurement, construction, installation, and commissioning activities.</li><li>Coordinate closely with engineering, procurement, construction, commissioning, and project management teams to validate schedule logic and sequencing.</li><li>Monitor progress against baseline schedules and identify critical paths, float consumption, and schedule risks.</li><li>Perform schedule updates, progress measurement, and forecast analysis.</li><li>Support mitigation planning and recovery schedules where delays or risks are identified.</li><li>Prepare and present schedule reports, dashboards, and progress updates for internal and client stakeholders.</li><li>Interface with cost control teams to support integrated schedule and cost performance analysis.</li><li>Participate in project reviews, planning workshops, and schedule risk assessments.</li><li>Ensure planning best practices and EPC procedures are consistently applied.</li></ul>Required Experience & Qualifications<ul><li>Proven experience working as a Project Scheduler / Planning Engineer on CCPP or thermal power plant projects.</li><li>Strong background working EPC‑side (Engineering, Procurement & Construction).</li><li>Solid understanding of the full power plant project lifecycle, including:<ul><li>Engineering and design phases</li><li>Long‑lead equipment procurement</li><li>Construction and installation sequencing</li><li>Pre‑commissioning, commissioning, and handover</li></ul></li><li>Proficiency in Primavera P6 (mandatory); experience with other planning tools is an advantage.</li><li>Experience developing and managing schedules for multi‑disciplinary power projects.</li><li>Excellent communication and stakeholder coordination skills.</li><li>Strong reporting and documentation capabilities.</li></ul>Preferred Qualifications<ul><li>Degree in Engineering, Construction Management, or a related discipline.</li><li>Experience working on international or large‑scale CCPP projects.</li><li>Familiarity with claims support, delay analysis, and contractual schedule requirements.</li></ul>

Project Scheduler - Power Plants - Texas

Project Scheduler - Power Plants - Louisiana

Project Scheduler - Power Plants - Georgia

Project Scheduler - Site Based

Commissioning Manager – Power Plant Job Summary: The Commissioning Manager is responsible for leading and executing the full commissioning scope of a Power Plant, from mechanical completion through to Final Turnover and commercial operation. This role requires proven leadership in Power Plant commissioning, strong technical expertise across gas turbine, steam turbine, HRSG, BOP, and electrical systems, and strict enforcement of EHS, quality, and regulatory compliance. Key Responsibilities Commissioning Leadership & Execution <ul><li>Lead, manage, and coordinate the multidisciplinary commissioning team across all CCPP systems.</li><li>Develop, review, and execute the Commissioning Management Plan, detailed system commissioning procedures, test protocols, and schedules.</li><li>Plan and execute commissioning activities from Mechanical Completion (MC) through Cold Commissioning, Hot Commissioning, First Fire, First Synchronization, Performance Testing, Reliability Run, and Final Turnover.</li><li>Interface closely with Construction, Engineering, OEMs, Vendors, and the Client to ensure seamless handover and issue resolution.</li><li>Oversee commissioning of Gas Turbines, Steam Turbines, HRSGs, Balance of Plant, Electrical, I&C, Water Treatment, and Auxiliary Systems.</li><li>Ensure all pre-commissioning, flushing, blowing, testing, and start-up activities are executed safely and to specification.</li><li>Enforce the highest standards of Environmental, Health & Safety (EHS) throughout all commissioning activities.</li><li>Ensure commissioning is executed in full compliance with project HSE plans, local regulations, permits, and site safety rules.</li></ul>Required Qualifications & Experience Education<ul><li>Bachelor’s degree in Mechanical, Electrical, or Chemical Engineering (or equivalent).</li><li>Minimum 10–15 years of power plant experience, with proven leadership in Combined Cycle Power Plant (CCPP) commissioning.</li><li>Demonstrated experience leading commissioning teams on large-scale CCPP projects through to Commercial Operation.</li><li>Strong hands-on experience with GT, ST, HRSG, Electrical, and I&C commissioning.</li><li>Experience with OEM coordination and grid synchronization processes is essential.</li></ul>

Commissioning Manager - Power Plant 

Commissioning Manager – Combined Cycle Power Plant Job Summary: The Commissioning Manager is responsible for leading and executing the full commissioning scope of a Combined Cycle Power Plant, from mechanical completion through to Final Turnover and commercial operation. This role requires proven leadership in CCPP commissioning, strong technical expertise across gas turbine, steam turbine, HRSG, BOP, and electrical systems, and strict enforcement of EHS, quality, and regulatory compliance. Key Responsibilities Commissioning Leadership & Execution <ul><li>Lead, manage, and coordinate the multidisciplinary commissioning team across all CCPP systems.</li><li>Develop, review, and execute the Commissioning Management Plan, detailed system commissioning procedures, test protocols, and schedules.</li><li>Plan and execute commissioning activities from Mechanical Completion (MC) through Cold Commissioning, Hot Commissioning, First Fire, First Synchronization, Performance Testing, Reliability Run, and Final Turnover.</li><li>Interface closely with Construction, Engineering, OEMs, Vendors, and the Client to ensure seamless handover and issue resolution.</li><li>Oversee commissioning of Gas Turbines, Steam Turbines, HRSGs, Balance of Plant, Electrical, I&C, Water Treatment, and Auxiliary Systems.</li><li>Ensure all pre-commissioning, flushing, blowing, testing, and start-up activities are executed safely and to specification.</li><li>Enforce the highest standards of Environmental, Health & Safety (EHS) throughout all commissioning activities.</li><li>Ensure commissioning is executed in full compliance with project HSE plans, local regulations, permits, and site safety rules.</li></ul>Required Qualifications & Experience Education<ul><li>Bachelor’s degree in Mechanical, Electrical, or Chemical Engineering (or equivalent).</li><li>Minimum 10–15 years of power plant experience, with proven leadership in Combined Cycle Power Plant (CCPP) commissioning.</li><li>Demonstrated experience leading commissioning teams on large-scale CCPP projects through to Commercial Operation.</li><li>Strong hands-on experience with GT, ST, HRSG, Electrical, and I&C commissioning.</li><li>Experience with OEM coordination and grid synchronization processes is essential.</li></ul>

Commissioning Manager - CCPP

Commissioning Manager / Client Representative for Mission Critical – Data Centers EarthStream Global is currently hiring a Commissioning Manager / Client Representative to support the delivery of complex mission‑critical data centre projects. This role requires a commissioning professional with a strong background in Data Centre CX (Commissioning & Validation) who can act as a key interface between site teams, project teams, and the client, ensuring technical issues are identified early and resolved effectively. The position is both technical and oversight‑focused, with responsibility for commissioning execution, quality control, and quality assurance throughout the project lifecycle. Key Responsibilities Commissioning & Client Representation <ul><li>Act as the Client Representative for all commissioning activities on site.</li><li>Lead and oversee Data Centre commissioning (CX) from early-stage planning through IST, validation, and handover.</li><li>Serve as the primary liaison between site teams, project management, vendors, and client/end‑user stakeholders.</li><li>Proactively identify commissioning risks, technical issues, or programme conflicts and drive resolutions.</li><li>Review and manage commissioning strategies, schedules, method statements, test scripts, and procedures.</li><li>Ensure systems are commissioned in line with design intent, client standards, and operational requirements.</li></ul>Quality Control & Quality Assurance <ul><li>Ensure all commissioning activities comply with the project Quality Management Plan.</li><li>Implement and monitor Quality Control (QC) procedures during commissioning and testing activities.</li><li>Carry out reviews of installation readiness, pre‑commissioning sign‑off, and test readiness.</li><li>Verify accuracy and completeness of commissioning documentation, test records, and close‑out deliverables.</li><li>Identify non‑conformances and coordinate corrective actions with construction, commissioning, and vendor teams.</li><li>Support audits, client inspections, and quality reviews related to commissioning and system validation.</li><li>Ensure handover documentation meets client QA/QC standards and operational acceptance criteria.</li></ul>Coordination & Reporting <ul><li>Facilitate communication between construction, commissioning agents, QA/QC teams, and client stakeholders.</li><li>Track progress against commissioning milestones and highlight risks to programme or quality.</li><li>Provide regular status updates, technical reports, and issue logs to the client and project leadership.</li><li>Support witnessing, validation, and acceptance testing activities.</li></ul>Required Experience & Qualifications<ul><li>Proven experience as a Commissioning Manager, Lead Commissioning Engineer, or Client Representative on mission‑critical data centre projects.</li><li>Strong expertise in Data Centre CX, including mechanical, electrical, controls, and Integrated Systems Testing (IST).</li><li>Demonstrated experience with quality control and quality assurance within commissioning environments.</li><li>Strong knowledge of critical infrastructure systems (HV/LV distribution, UPS, generators, cooling systems, BMS).</li><li>Experience representing the client or end user is highly desirable.</li><li>Excellent stakeholder engagement, problem‑solving, and communication skills.</li><li>Ability to work collaboratively on site and manage multi‑disciplinary teams.</li><li>Strong documentation, reporting, and organisational skills.</li></ul>

Commissioning Manager / Client Representative - Oklahoma

HSE Advisor  Project: Celtic Mob Date: approx. mid-end May Duration: approx. 6 weeks Position: HSE Advisor Mob: Cork SoW: Post-lay burial (Trenching & jetting), survey   Required Certificates 1. Valid Medical Fitness Certificate OGUK or STCW 2. Valid Maritime Safety Training Certificate full GWO or Foet Bosiet 4. For non-EU citizens, working permit 5. ETA Visa 6. A1 certification

HSE Advisor

SCADA Engineer Representative Duration: 01-May-2026 - 28-Feb-2027 Department: Electrical Systems Rotations: 14/14 days – 12 hrs a day Location: Rhode Island, USA Description: We are seeking an experienced SCADA Commissioning Lead to support the delivery of SCADA systems across offshore wind projects. The role is positioned as an independent, on-site consultant function with responsibility for ensuring that all SCADA commissioning activities are executed safely, in compliance with applicable standards, and in alignment with the overall project schedule. The consultant will act as the central coordination point for SCADA commissioning, working across contractors, engineering teams, and commissioning management to ensure seamless execution. The scope includes Substation Control Systems, WTG SCADA and grid compliance, communication networks, metering systems, and associated auxiliary systems. The role requires both technical depth and the ability to operate effectively in a complex, multi-stakeholder EPC environment. A key part of the assignment is to establish and maintain full control over commissioning activities. This includes driving the preparation and execution of FAT, SAT, and SIT, ensuring that all testing is properly conducted, documented, and approved. The consultant will be responsible for developing and maintaining the SCADA Commissioning Plan, including scope definition, quality assurance, and timelines, and for ensuring that all deliverables meet internal standards as well as regulatory and HSE requirements. The consultant is expected to actively manage interfaces between SCADA contractors, electrical commissioning teams, and project stakeholders. This includes coordinating daily commissioning activities, monitoring progress against the plan, and proactively identifying risks that may impact schedule or quality. Where deviations occur, the consultant must take ownership of driving corrective actions and ensuring alignment across involved parties. In addition, the role carries a clear mandate to ensure quality and compliance. The consultant will have the authority to challenge and reject non-compliant work or documentation and is expected to enforce project standards consistently across all SCADA-related activities. Regular reporting to the Commissioning Manager and SCADA Package Manager will be required, with a focus on transparency, risk visibility, and progress tracking. Overall, the success of the assignment will be measured by the timely and high-quality commissioning of SCADA systems, the absence of critical HSE incidents within scope, and the delivery of complete, audit-ready documentation. The consultant is expected to contribute not only through execution, but by strengthening coordination, reducing risk, and ensuring that SCADA commissioning supports the broader project objectives. The resource will work onshore and offshore. The Consultant must bring his/her own PC and/or Iphone. External consultants’ equipment such as PCs, mobile phones and iPads must always be up-to-date with the latest iOS release. The owner must allow the client’s AirWatch security and management software for iPhones and iPads to be installed. The app is mandatory on all mobile devices used by client staff (including External consultants) to protect them from cybercrime. The owner must grant approval for client to remove apps, data and access from privately owned equipment if it is deemed to pose a risk in relation to client’s security or the GDPR regulations, if the equipment is lost/stolen, or if the owner ceases to have an active contract with Magnit and/or client. When an external consultant leaves the client, they must contact the IT Service Desk to remove all client apps and data. The IT Service Desk can only support privately owned equipment in connection with client's AirWatch security and management software. Requirements: The ideal candidate brings a minimum of five years of experience within SCADA or automation commissioning, preferably from offshore wind or similar large-scale infrastructure projects. A solid technical foundation combined with strong project execution capabilities is essential, as is the ability to operate independently in a demanding site environment. Experience working with international contractors and managing complex interfaces is critical to success in this role. Has GWO and hold the cost to maintain it. A person with offshore Wind expirations and is willing to stay for a longer period at the time if needed.

SCADA Engineer

SAP (Senior Authorised Person) – 66kV 04/2026 – 03/2028 Responsible for HV system integration, operational supervision and electrical safety rules (HV/MV/LV). Ensure safety when working with High HV and LV. Responsibilities <ul><li>Responsible for electrical issues accordingly to the affected Country's legislation and regulation.</li><li>Delegating scopes of works for the whole team of Transmission Specialist on sites both offshore and onshore work scopes.</li><li>Responsible for and managing rotaplan’s for all Transmission Specialist and Operators on site.</li><li>Leading all improvements of instructions and site-specific instructions improvements related to High Voltage electrical operations on sites.</li><li>Implementation of the client's Electrical Safety Rules on site, including the safe system of Work.</li><li>Advise operationally on high voltage electrical installations to WTG, offshore substations and both HV submarine and onshore cables.</li><li>Oversee safe commissioning of grid connections, onshore substations and associated MV/HV/LV plant and equipment.</li><li>Oversee all MV/HV/LV electrical operational activities to ensure safety, security and integrity of the HV network.</li><li>Contribute to proactive management, good coordination and communication between all parties and that the process works effectively.</li><li>Coordinate MV/HV/LV commissioning activities through the project construction Stages.</li><li>Advise operationally on high voltage electrical installations to WTG, offshore substations and both HV submarine and onshore cables.</li><li>Oversee all MV/HV/LV electrical operational activities to ensure safety, security and integrity of the HV network.</li><li>Oversee and the delegation of planning of all switching activities on sites, both offshore and onshore activities.</li><li>Controlling the safety documents for the Electrical Safety Rules on site.</li><li>Define safety procedures for electrical matters.</li><li>Delegation of tasks to the Operators on sites, who oversee safe commissioning of grid connections, onshore substations and associated MV/HV/LV plant and equipment.</li><li>Reviewing the high voltage scope of work.</li><li>Knowledge and experience with country specific standards.</li></ul> Tasks <ul><li>Ensure compliancy with and managing of the client's Electrical Safety Rules.</li><li>Safety coordination in electrical matters.</li><li>Manage and coordinate HV/MV/LV commissioning activities.</li><li>Coordinate with National Grid and attend commissioning panel meetings.</li><li>Act as senior authorized person.</li><li>Outage management and network control in collaboration with the Control Engineers.</li><li>Prepare and check high voltage switching schedules.</li><li>Update MV/HV/LV schematic diagrams.</li><li>Inspect work sites and perform site safety inspections and auditing for electrical matters.</li><li>Check method statements for electrical matters.</li><li>Implement and provide training programs for relevant staff according to the rules.</li><li>Mentor HV APs during field training.</li></ul> Deliverables <ul><li>Input to the project commissioning management manual and related documents (including pre-commissioning and commissioning quality plans).</li><li>Participation in different audits.</li><li>Reports from FAT & SAT on the different high voltage equipment’s.</li><li>Onsite check of switching programs.</li><li>Participation in the planning of resource and work activities.</li><li>Participation in authorizations and assessments of new candidates.</li><li>Deliver inputs to the design phase of the project on technical aspects.</li></ul> Decision Authority <ul><li>Final say in relation to MV/HV switching and isolations.</li><li>Issue of the client's Electrical Safety Rules safety rules documents.</li><li>Organization and management of the SAP permit office, including all operational staff.</li></ul> Qualifications and Requirements <ul><li>Several years of operation and commissioning experience within the field of high voltage 9electricity, offshore experience preferable.</li><li>Appropriate electrical qualification and background related to the authorization scope.</li><li>Minimum 3 year of working experience within onshore substations systems.</li><li>Complete and up to date GWO courses and HUET with CA-EBS if required by site (climbing gear person weight limit – 120kg/264lb).</li></ul>

Senior Authorised Person 66KV

Join our clients team and work on world-class hyperscale data centre projects with leading global clients! We are seeking an experienced Electrical Authorised Person to ensure safety, compliance, and excellence across electrical commissioning and operations. Key Responsibilities Safety: <ul><li>Enforce company procedures including Control of Hazardous Energies, Permit to Work, and Lock-Out Tag-Out (LOTO) systems. </li><li>Ensure compliance with the Electrical Safe System of Work (ESSOW) and client safety directives. </li><li>Review and approve subcontractor electrical RAMS and COHE documentation. </li><li>Manage and control LOTO systems, safe switching, energisations, and isolations during commissioning. </li><li>Conduct regular safety audits, inspections, and incident reporting. </li><li>Ensure correct use, selection, and maintenance of electrical PPE and arc flash mitigation procedures. </li></ul>Technical: <ul><li>Perform commissioning, testing, troubleshooting, and inspection of LV/MV electrical systems, including MCCs, VSDs, switchgear, and distribution panels. </li><li>Read and interpret technical drawings, SLDs, and wiring diagrams. </li><li>Complete and record all pre- and post-energisation testing in compliance with local regulations. </li><li>Support all commissioning phases (Levels 1–5) and enforce the Electrical Permit to Work system. </li><li>Assist in electrical incident investigations and ensure safety and calibration of testing equipment. </li><li>Execute safe switching schedules and energisation procedures under SAP direction. </li><li>Collaborate effectively within multi-disciplinary teams. </li></ul>Why Join Us: <ul><li>Work on prestigious hyperscale data centre projects with global clients. </li><li>Competitive compensation package with accommodation and travel support. </li><li>Opportunity for long-term engagement and career development within a growing international team. </li></ul>visa support available for UK Citizens.

Authorised Person - Netherlands

Authorised Person - Finland

Senior Authorised Person (SAP) – Hyperscale Data Centre Projects  We are seeking an experienced Senior Authorised Person (SAP) to join our clients team on cutting-edge hyperscale data centre projects in Germany. This is an exciting opportunity to play a key role in the safe and efficient operation of HV/ MV and LV systems within one of the world’s fastest-growing infrastructure sectors. You will be responsible for implementing, supervising, and controlling all electrical switching operations, isolations, and energisation activities in accordance with project and client safety standards.  Key Responsibilities<ul><li>Manage and oversee HV/LV electrical operations, ensuring full compliance with safety rules and site procedures.</li><li>Prepare and execute switching schedules, isolation procedures, and testing protocols.</li><li>Issue and control safety documentation, including permits, limitations, and sanction-for-test.</li><li>Coordinate with design, construction, and commissioning teams to ensure system integrity.</li><li>Maintain a high standard of safety awareness and ensure adherence to EN 50110-1 and other relevant standards.</li><li>Provide guidance and training to authorised and competent persons as required.</li></ul>Requirements<ul><li>Proven experience working as a Senior Authorised Person </li><li>Extensive hands-on experience with HV and LV electrical networks.</li><li>In-depth knowledge of switching schedules, isolation protocols, and operational safety rules.</li><li>Familiarity with operational safety documentation and relevant industry standards (e.g. EN 50110-1).</li><li>Strong communication and coordination skills, with the ability to work within multi-disciplinary teams.</li></ul>Why Join Our Client<ul><li>Work on world-class hyperscale data centre projects with leading global clients.</li><li>Competitive compensation package and accommodation/travel support </li><li>Opportunity for long-term engagement and career development within a growing international team.</li></ul>Visas can be provided for UK Citizens

Senior Authorised Person - Netherlands

Senior Authorised Person (SAP) – Hyperscale Data Centre Projects  We are seeking an experienced Senior Authorised Person (SAP) to join our clients team on cutting-edge hyperscale data centre projects in Belgium. This is an exciting opportunity to play a key role in the safe and efficient operation of HV/ MV and LV systems within one of the world’s fastest-growing infrastructure sectors. You will be responsible for implementing, supervising, and controlling all electrical switching operations, isolations, and energisation activities in accordance with project and client safety standards.  Key Responsibilities<ul><li>Manage and oversee HV/LV electrical operations, ensuring full compliance with safety rules and site procedures.</li><li>Prepare and execute switching schedules, isolation procedures, and testing protocols.</li><li>Issue and control safety documentation, including permits, limitations, and sanction-for-test.</li><li>Coordinate with design, construction, and commissioning teams to ensure system integrity.</li><li>Maintain a high standard of safety awareness and ensure adherence to EN 50110-1 and other relevant standards.</li><li>Provide guidance and training to authorised and competent persons as required.</li></ul>Requirements<ul><li>Proven experience working as a Senior Authorised Person (SAP)</li><li>SAP certification</li><li>Extensive hands-on experience with HV/MV and LV electrical networks.</li><li>In-depth knowledge of switching schedules, isolation protocols, and operational safety rules.</li><li>Familiarity with operational safety documentation and relevant industry standards (e.g. EN 50110-1).</li><li>Strong communication and coordination skills, with the ability to work within multi-disciplinary teams.</li></ul>Why Join Us<ul><li>Work on world-class hyperscale data centre projects with leading global clients.</li><li>Competitive compensation package and accommodation/travel support </li><li>Opportunity for long-term engagement and career development within a growing international team.</li></ul>

Senior Authorised Person - Belgium

Material Handling Manager – Power Plant Projects (USA) We are seeking an experienced Material Handling Manager to support large-scale power plant projects within the energy sector. This role is critical to ensuring the safe, compliant, and high‑quality control, storage, and movement of materials and equipment, including heavy-duty power generation components. Key Responsibilities<ul><li>Manage all site material handling activities across power plant construction and installation phases</li><li>Oversee inventory control for heavy-duty power plant equipment, including turbines, generators, auxiliaries, and balance-of-plant materials</li><li>Ensure materials are received, inspected, stored, preserved, and issued in accordance with project quality standards and OEM requirements</li><li>Coordinate logistics, warehousing, laydown yard operations, and interface with procurement, quality, and construction teams</li><li>Implement and maintain robust material tracking, documentation, and reporting systems</li><li>Ensure full compliance with quality plans, inspection & test plans (ITPs), and material traceability requirements</li><li>Manage non-conformance issues related to material damage, incorrect storage, or handling and support corrective actions</li><li>Enforce HSE, lifting, and quality procedures during all material handling activities</li><li>Identify risks related to material quality, preservation, or availability and implement mitigation plans</li></ul>Required Experience & Qualifications<ul><li>Proven experience as a Material Handling Manager on power plant or major industrial projects</li><li>Strong background supporting OEM-led projects</li><li>Demonstrated experience managing quality-critical and heavy-duty power generation equipment inventory</li><li>Solid understanding of material quality control, preservation standards, and documentation requirements</li><li>Experience working closely with QA/QC teams and supporting audits and inspections</li><li>Ability to work in a fast-paced, schedule-driven project environment</li><li>Strong communication and coordination skills across multiple stakeholders</li></ul>

Material Handling Manager - Texas

Commissioning Manager / Client Representative for Mission Critical – Data Centres EarthStream Global is currently hiring a Commissioning Manager / Client Representative to support the delivery of complex mission‑critical data centre projects. This role requires a commissioning professional with a strong background in Data Centre CX (Commissioning & Validation) who can act as a key interface between site teams, project teams, and the client, ensuring technical issues are identified early and resolved effectively. The position is both technical and oversight‑focused, with responsibility for commissioning execution, quality control, and quality assurance throughout the project lifecycle. Key ResponsibilitiesCommissioning & Client Representation <ul><li>Act as the Client Representative for all commissioning activities on site.</li><li>Lead and oversee Data Centre commissioning (CX) from early-stage planning through IST, validation, and handover.</li><li>Serve as the primary liaison between site teams, project management, vendors, and client/end‑user stakeholders.</li><li>Proactively identify commissioning risks, technical issues, or programme conflicts and drive resolutions.</li><li>Review and manage commissioning strategies, schedules, method statements, test scripts, and procedures.</li><li>Ensure systems are commissioned in line with design intent, client standards, and operational requirements.</li></ul>Quality Control & Quality Assurance <ul><li>Ensure all commissioning activities comply with the project Quality Management Plan.</li><li>Implement and monitor Quality Control (QC) procedures during commissioning and testing activities.</li><li>Carry out reviews of installation readiness, pre‑commissioning sign‑off, and test readiness.</li><li>Verify accuracy and completeness of commissioning documentation, test records, and close‑out deliverables.</li><li>Identify non‑conformances and coordinate corrective actions with construction, commissioning, and vendor teams.</li><li>Support audits, client inspections, and quality reviews related to commissioning and system validation.</li><li>Ensure handover documentation meets client QA/QC standards and operational acceptance criteria.</li></ul>Coordination & Reporting <ul><li>Facilitate communication between construction, commissioning agents, QA/QC teams, and client stakeholders.</li><li>Track progress against commissioning milestones and highlight risks to programme or quality.</li><li>Provide regular status updates, technical reports, and issue logs to the client and project leadership.</li><li>Support witnessing, validation, and acceptance testing activities.</li></ul>Required Experience & Qualifications<ul><li>Proven experience as a Commissioning Manager, Lead Commissioning Engineer, or Client Representative on mission‑critical data centre projects.</li><li>Strong expertise in Data Centre CX, including mechanical, electrical, controls, and Integrated Systems Testing (IST).</li><li>Demonstrated experience with quality control and quality assurance within commissioning environments.</li><li>Strong knowledge of critical infrastructure systems (HV/LV distribution, UPS, generators, cooling systems, BMS).</li><li>Experience representing the client or end user is highly desirable.</li><li>Excellent stakeholder engagement, problem‑solving, and communication skills.</li><li>Ability to work collaboratively on site and manage multi‑disciplinary teams.</li><li>Strong documentation, reporting, and organisational skills.</li></ul>

Commissioning Manager - Client Representative - Texas

Senior Site Safety & Health Specialist EarthStream Global are seeking a Senior Site Safety & Health Specialist to provide on-site safety leadership for commercial construction projects. This role is ideal for a local candidate with hands-on experience supporting complex, high‑risk builds. What You’ll Do<ul><li>Lead and enforce site-specific safety and health programs</li><li>Ensure compliance with OSHA and applicable safety regulations</li><li>Conduct job site audits, safety walk‑throughs, and risk assessments</li><li>Manage incident investigations, near misses, and corrective actions</li><li>Stop work when unsafe conditions exist and partner with project teams on resolutions</li><li>Deliver safety training and promote a zero-incident culture</li><li>Collaborate with clients, project teams, and subcontractor safety representatives</li><li>Maintain all safety documentation in an audit‑ready state</li></ul>Required Experience & Qualifications<ul><li>Experience on BESS, Substation, Power Generation, or Mission Critical (data center) projects required</li><li>Commercial building construction experience</li><li>7 years construction safety or construction management experience (education‑equivalent combinations accepted)</li><li>Strong knowledge of OSHA Construction & General Industry standards</li><li>OSHA 10‑Hour or 30‑Hour Construction Certification</li><li>Proficient in Microsoft Word, Excel, and PowerPoint</li><li>Valid driver’s license and ability to travel to local job sites</li><li>Ability to work flexible site schedules as required</li></ul>

Health & Safety Specialist - Georgia

Health & Safety Specialist - Texas

Health & Safety Specialist - Ohio

Quality Manager/Quality Engineer Electrical   Duration: 01/05/2026 – 30/04/2027 Location: Swindon, London (depending on the project) Type: Outside IR35   Your tasks as Quality Manager - Define and implement complex concepts, processes and methods for quality planning, assurance and control in line with the companies Quality Management Framework • Define and implement the project quality strategy under a risk-based approach, including planning and monitoring of quality resources and budgets • Setting the project quality objectives and relevant standards to be achieved • Communication and collaboration with all relevant project stakeholders • Carry out supplier qualification and assessment; continuous further development of supplier quality • Preparation of quality-related tender documents (e.g. quality assurance agreement), evaluation of offers and support in contract negotiations with suppliers Your tasks as Quality Engineer - Be the Quality Engineer on the Electrical Package for the Dogger Bank South Projects reporting to the Project Quality Manager, Project/Package Manager, and line organisation on the scope of delivery. • Project planning, co-ordination and control of quality activities for the Electrical Contractor their Manufacturers, Fabricators, Civil Contractors, Installers and their supply chains, with the support of the Offshore Substation Fabrication and Civil Quality Engineers. • Implement contractual and corporate quality and technical requirements within the project package. • Plan and manage the production/installation monitoring and inspection of equipment at manufacturing plants, fabrication sites, onshore and offshore sites from design to handover to O&M/OFTO with all deliverables and checks. • Co-ordinate multi-disciplined teams of inspectors managed by the Quality Manager both onshore and offshore in the delivery of scope of works. • Evaluation of reports, inspection results and findings from Contractor and Employer Systems. • Capture all work progress, inspections, and non-conformities (NC) in the client's Quality inspection app and monitor and report on compliance and progress of work. Assess non-conformities, conduct root cause analysis and follow-up of correction and corrective action process. • Manage Document Deliverables to acceptance ready for handover to O&M/OFTO • Prepare tender documents (e.g., quality assurance agreements), evaluate tender returns, and support contract negotiations with suppliers as required. • Plan/conduct general quality monitoring/audits. • Perform supplier qualification and assessment and continuously develop supplier quality. • Collaborate with Project Quality Manager to identify and manage risks within the Projects. Your profile - Successfully completed university degree or significant experience with a (HNC/HND) in an HV Electrical Engineering Environment (or in a comparable field) as well as additional qualifications as quality auditor, quality manager or comparable. • Relevant professional experience and expertise in quality assurance, control/monitoring and management as well as comprehensive expertise in offshore wind farm components in general and substation electrical components in particular. • Extensive knowledge in the application of relevant international project and quality management standards as well as technical regulations and standards such as IEC, BSH, DNV, BS/EN/ISO and NORSOK etc. • Practical experience from the construction and/or manufacturing industry with a good understanding of OEM HVDC, electrical components and the Supply Chain. • Able to demonstrate a good understanding of quality requirements and risks in onshore and offshore environment and the associated standards. • Business fluent in written and spoken English with a very good knowledge of common IT tools and systems. • Motivation to independently and sustainably advance your cause and the ability to keep an overview at all times in hectic project business. • You are an empathetic, reliable and motivated team player with a willingness to travel in accordance client Travel Policies in delivery of scope of work.

Quality Manager

Role Summary As a Project Coordinator / Work Planner, you are responsible for ensuring that all preparatory activities are completed so that projects and operational works can start and finish smoothly, safely, and in accordance with agreements. You act as the central point of coordination and control within the project team, where all project information comes together. Key Responsibilities <ul><li>Monitoring and reporting on integrated project quality across all project control aspects (GROTIK: Scope, Risk, Organization, Time, Information, Cost), acting as the “conscience” of the project team</li><li>Supporting the Project Manager in preparing:<ul><li>Project management meetings</li><li>Periodic progress and accountability meetings with the Lead</li></ul></li><li>Preparing and updating monthly and quarterly financial forecasts, including:<ul><li>Cashflow</li><li>ETC (Estimate to Complete)</li><li>EAC (Estimate at Completion)</li><li>Substantiating deviations from the approved budget</li></ul></li><li>Preparing, maintaining, and updating project schedules to ensure contractual milestones and final commissioning dates are met</li><li>Developing and maintaining internal resource planning per project and processing this in relevant systems</li><li>Preparing, updating, and monitoring project risk registers</li><li>Managing internal documentation together with the Document Controller, including:<ul><li>Contract documentation</li><li>Requests for Change (RFC)</li><li>Requests for Acceptance (RFA)</li><li>Monitoring review and approval timelines with contractors</li></ul></li><li>Monitoring Owner-Supplied Goods (client-direct supplies) delivered to contractors</li></ul>Candidate Profile Education & Experience <ul><li>HBO-level education or equivalent working and thinking level</li><li>5–10 years of recent experience in roles such as:<ul><li>Work Planner</li><li>Project Coordinator</li><li>Project Controls Manager</li></ul></li><li>Experience in infrastructure or technically oriented organizations, preferably within the energy sector</li></ul>Skills & Competencies <ul><li>Familiarity with project control systems for managing:<ul><li>Cost</li><li>Planning</li><li>Risk</li><li>Documentation (Within TenneT: IFS, Primavera, ARM, Meridian)</li></ul></li><li>Strong communication and negotiation skills</li><li>Excellent organizational, planning, and prioritization abilities</li><li>Professional, analytical, flexible, and able to work independently</li><li>Strong stakeholder awareness and organizational sensitivity</li><li>Proven ability to collaborate effectively with:<ul><li>Project Managers</li><li>Project team members</li><li>Internal and external stakeholders</li></ul></li><li>Preferred (not mandatory):<ul><li>Experience with different contract types (Specifications / Bestek, UAV, UAV‑GC)</li><li>Systems-Oriented Contract Management</li><li>Project management methodologies such as PRINCE2 or IPMA</li></ul></li><li>Full professional proficiency in Dutch and English (spoken and written), due to contractor communication requirements</li></ul>Important Information <ul><li>Primary workplace schedule:<ul><li>2 days per week in Hoogeveen (preferably Monday and Tuesday)</li><li>2 days per week in Eemshaven (Thursday mandatory)</li><li>1 day per week remote (home office)</li></ul></li></ul>

Project Coordinator / Work Planner

As a Lead Engineer, you are responsible for the technical integrity of projects throughout the execution phase: <ul><li>Requesting and coordinating discipline engineers and managing their technical input</li><li>Leading the assessment of contractor documentation and taking responsibility for all technical aspects of projects</li><li>Active involvement in project realization, from detailed design through commissioning, with frequent presence on-site</li><li>Maintaining close contact with internal and external stakeholders, including regional grid operators and contractor engineers</li><li>Supporting and advising during the tendering, design, and execution phases</li><li>Reviewing and approving:<ul><li>Technical specifications</li><li>Work packages</li><li>Drawings and calculations</li></ul></li><li>Working with multiple contract types, including traditional contracts, UAV, and UAV-GC</li></ul>Candidate Profile Education & Experience <ul><li>Bachelor’s or Master’s degree in Electrical Engineering or Energy Technology</li><li>Minimum 5 years’ experience in high-voltage engineering (≥110 kV), including substations<ul><li>Alternatively:<ul><li>Minimum 3 years of relevant experience for experienced engineers</li><li>Engineers with experience from ≥10 kV networks are also eligible</li></ul></li></ul></li></ul>Skills & Competencies <ul><li>Strong leadership or coordination capabilities (not mandatory for experienced engineers)</li><li>Analytical, structured, and able to maintain a helicopter view</li><li>Strong communication skills and resilience under time pressure</li><li>Experience with project-based working methods (e.g. PRINCE2, IPMA)</li><li>Knowledge of and experience with:<ul><li>Contract forms (Specifications, UAV, UAV-GC)</li><li>Systems-Oriented Contract Management</li><li>Systems Engineering</li><li>Requirements management tools such as Relatics</li></ul></li><li>Full professional fluency in Dutch (mandatory)</li></ul>

Lead Engineer

About the Role We are seeking an experienced Construction Manager to lead the delivery of substation construction projects across the United States. This role is critical to the successful execution of high‑voltage electrical infrastructure projects supporting utilities, renewable integration, and grid modernization. The Construction Manager will oversee all site‑based activities, ensuring projects are delivered safely, on schedule, and in compliance with technical, regulatory, and quality standards. This position offers the opportunity to work on complex, high‑impact power projects in a growing market sector. Key Responsibilities<ul><li>Manage on‑site construction activities for new‑build and expansion substation projects (distribution, transmission, and high‑voltage)</li><li>Coordinate civil, structural, electrical, and commissioning works across multiple contractors and trades</li><li>Oversee project schedules, field budgets, quality control, and daily construction operations</li><li>Enforce strict compliance with OSHA, company safety policies, and utility safety standards</li><li>Lead subcontractor coordination meetings and resolve site issues proactively</li><li>Ensure adherence to construction drawings, technical specifications, and approved methods</li><li>Support testing, energization, and close‑out activities in coordination with utility stakeholders</li><li>Maintain accurate progress reporting and communicate risks, delays, or changes to project leadership</li></ul>Required Qualifications<ul><li>7 years of construction management or supervisory experience within substation or power infrastructure projects</li><li>Strong understanding of high‑voltage systems, substation construction sequencing, and electrical safety practices</li><li>Proven experience working with utilities, EPC contractors, or heavy civil/electrical contractors</li><li>Demonstrated ability to manage multiple subcontractors and complex site logistics</li><li>Excellent leadership, communication, and problem‑solving skills</li><li>Familiarity with US electrical codes, standards, and utility requirements</li><li>Willingness to travel or relocate to project sites as required</li></ul>Preferred Qualifications<ul><li>Bachelor’s degree in Construction Management, Engineering, or related field</li><li>Experience with transmission & distribution (T&D) or renewable interconnection projects</li><li>OSHA 30 certification</li><li>Proficiency with construction management software (e.g., Procore, Primavera P6, MS Project)</li><li>Working knowledge of commissioning and energization processes</li></ul>

Construction Manager - Substations 

About the Role We are seeking an experienced Construction Manager to lead the delivery of substation construction projects across the United States. This role is critical to the successful execution of high‑voltage electrical infrastructure projects supporting utilities, renewable integration, and grid modernization. The Construction Manager will oversee all site‑based activities, ensuring projects are delivered safely, on schedule, and in compliance with technical, regulatory, and quality standards. This position offers the opportunity to work on complex, high‑impact power projects in a growing market sector. Key Responsibilities<ul><li>Manage on‑site construction activities for new‑build and expansion substation projects (distribution, transmission, and high‑voltage)</li><li>Coordinate civil, structural, electrical, and commissioning works across multiple contractors and trades</li><li>Oversee project schedules, field budgets, quality control, and daily construction operations</li><li>Enforce strict compliance with OSHA, company safety policies, and utility safety standards</li><li>Lead subcontractor coordination meetings and resolve site issues proactively</li><li>Ensure adherence to construction drawings, technical specifications, and approved methods</li><li>Support testing, energization, and close‑out activities in coordination with utility stakeholders</li><li>Maintain accurate progress reporting and communicate risks, delays, or changes to project leadership</li></ul>Required Qualifications<ul><li>7 years of construction management or supervisory experience within substation or power infrastructure projects</li><li>Strong understanding of high‑voltage systems, substation construction sequencing, and electrical safety practices</li><li>Proven experience working with utilities, EPC contractors, or heavy civil/electrical contractors</li><li>Demonstrated ability to manage multiple subcontractors and complex site logistics</li><li>Excellent leadership, communication, and problem‑solving skills</li><li>Familiarity with US electrical codes, standards, and utility requirements</li><li>Willingness to travel or relocate to project sites as required</li></ul>Preferred Qualifications<ul><li>Bachelor’s degree in Construction Management, Engineering, or related field</li><li>Experience with transmission & distribution (T&D) or renewable interconnection projects</li><li>OSHA 30 certification</li><li>Proficiency with construction management software (e.g., Procore, Primavera P6, MS Project)</li><li>Working knowledge of commissioning and energization processes</li></ul>

Construction Manager - Substation 

About the Role We are seeking an experienced Construction Manager to lead the delivery of complex, mission‑critical construction projects across the United States. This role will play a key part in managing high‑value, fast‑paced projects where safety, quality, and schedule adherence are critical to success. You will oversee site operations from pre‑construction through close‑out, working closely with owners, designers, subcontractors, and internal teams to ensure world‑class project delivery in environments where uptime and reliability are paramount. Key Responsibilities<ul><li>Lead on‑site construction activities for mission‑critical projects, including data centers and other critical facilities</li><li>Manage project schedules, budgets, quality controls, and safety performance</li><li>Coordinate subcontractors, vendors, and suppliers to ensure project milestones are achieved</li><li>Enforce compliance with OSHA regulations, company safety standards, and site‑specific requirements</li><li>Collaborate with project managers, engineers, and commissioning teams to support seamless project delivery</li><li>Review construction documents, RFIs, submittals, and change orders</li><li>Maintain clear communication with stakeholders, providing regular progress and risk updates</li><li>Support commissioning, turnover, and close‑out processes</li></ul>Required Qualifications<ul><li>Minimum 7–10 years of construction management experience, with significant exposure to mission‑critical or complex technical projects</li><li>Proven experience managing large‑scale projects in live or high‑reliability environments (data centers highly preferred)</li><li>Strong knowledge of construction means and methods, sequencing, and cost controls</li><li>Excellent leadership, communication, and problem‑solving skills</li><li>Thorough understanding of US construction codes, standards, and OSHA safety requirements</li><li>Ability to travel or relocate to project sites as required</li></ul>Preferred Qualifications<ul><li>Bachelor’s degree in Construction Management, Engineering, or a related discipline</li><li>Experience delivering data center projects for hyperscale, colocation, or enterprise clients</li><li>Proficiency with construction management software (e.g., Procore, P6, MS Project)</li><li>OSHA 30 certification (or higher)</li></ul>

Construction Manager - Mission Critical 

03/05/2026 – 31/12/2026 14/14 rotations   Key Responsibilities: <ul><li>Perform routine inspections and basic maintenance tasks across the converter station</li><li>Carry out general “odd jobs” including minor repairs, housekeeping, and equipment checks</li><li>Assist with planned and reactive maintenance activities as directed by the offshore team</li><li>Monitor equipment and systems, reporting abnormalities or faults promptly</li><li>Support logistics operations, including handling deliveries, tools, and materials</li><li>Maintain cleanliness and organisation of work areas, workshops, and accommodation spaces</li><li>Assist other departments (electrical, mechanical, HSE) as required during night operations</li><li>Ensure compliance with all health, safety, and environmental procedures</li><li>Participate in emergency response duties as part of the offshore team</li></ul>  Skills & Experience: <ul><li>Previous offshore experience (wind, oil & gas, or marine) preferred</li><li>Practical, hands-on approach with basic mechanical or electrical awareness</li><li>Ability to work independently with minimal supervision during night shifts</li><li>Strong problem-solving skills and willingness to take on varied tasks</li><li>Good communication and teamwork skills</li><li>Comfortable working in a remote offshore environment</li></ul>  Qualifications: <ul><li>Offshore certifications – GWOs with Enhanced first aid, medical, chester step, HUET CA EBS, Slinger, and signals</li><li>Relevant technical or trade background (desirable but not essential)</li><li>Crane operator (desirable but not essential)</li></ul>  Personal Attributes: <ul><li>Flexible and proactive attitude</li><li>High level of reliability and self-discipline</li><li>Safety-conscious mindset</li><li>Able to adapt to changing priorities and unexpected tasks</li></ul>  Working Conditions: <ul><li>Night shift role on a rotating offshore schedule</li><li>Exposure to offshore weather conditions and confined working environments</li><li>Requires physical fitness and ability to perform manual tasks</li></ul>

Site Night Technicians

Health & Safety Specialist - California

Health & Safety Specialist - Arizona

HR Business Partner  6-months initial  Nysa, Poland – hybrid work options available    This client is a global leader in materials technology. The organization focuses on clean mobility, sustainable materials, battery technologies, and high?performance recycling. Umicore operates multiple production sites globally, including key locations throughout Belgium and Poland.    Department Description and Responsibilities  The People & Organization (P&O) team at the Nysa site supports the full HR lifecycle within a rapidly growing industrial production environment.    Core responsibilities include:  <ul><li>Workforce planning & staffing support </li></ul><ul><li>Leadership & talent development </li></ul><ul><li>Labor relations & social dialogue </li></ul><ul><li>HR compliance & policy governance </li></ul><ul><li>People analytics & reporting </li></ul><ul><li>Employee engagement & communication </li></ul>  Project Description  This client is seeking a Site P&O Lead (HR Business Partner) to strengthen the P&O operations at the Nysa location.    This role combines strategic HR Business Partnering with hands on operational work, in close collaboration with site leadership, HR coaches, and global P&O teams.    Key domains for 2026 include:  <ul><li>Implementing Career Development frameworks </li></ul><ul><li>Integrating IATF/automotive quality requirements into HR processes </li></ul><ul><li>Improving labor relations and managing union interactions </li></ul><ul><li>Rolling out Absenteeism & Return to work programs </li></ul><ul><li>Executing Stay Interviews & People Survey action plans </li></ul><ul><li>Ensuring policy review, compliance, and harmonization </li></ul>  Primary Tasks and Responsibilities  <ul><li>Lead and execute HR projects relating to career frameworks, competence models, and quality integration </li></ul><ul><li>Prepare and execute training, communication, and rollout of key P&O initiatives </li></ul><ul><li>Strengthen labor relations and ensure compliance with Polish labor law </li></ul><ul><li>Support and challenge management on workforce, talent, and organizational topics </li></ul><ul><li>Facilitate survey sessions, team dialogues, and engagement workshops </li></ul><ul><li>Audit, update, and standardize HR policies, procedures, and SOPs </li></ul><ul><li>Provide operational coaching to HR team members where needed </li></ul><ul><li>Serve as the local point of contact for global HR implementations </li></ul><ul><li>Ensure documentation and reporting accuracy to meet audit and IATF standards </li></ul>  Technical Profile Requirements  <ul><li>Min 7yrs. HR Business Partner experience in industrial environments </li></ul><ul><li>Strong knowledge of Polish labor law and experience working with trade unions </li></ul><ul><li>Experience implementing HR frameworks (career paths, competency models) </li></ul><ul><li>Understanding of IATF or other automotive quality standards </li></ul><ul><li>Experience with HR compliance, audits, and procedural governance </li></ul><ul><li>Proficiency in MS Office </li></ul><ul><li>Experience with SAP SuccessFactors is a strong plus </li></ul>  Non-Technical Profile Requirements  <ul><li>Senior, confident professional able to work autonomously </li></ul><ul><li>Strong stakeholder management & communication skills </li></ul><ul><li>Hands-on mindset: strategic yet willing to support operational tasks </li></ul><ul><li>High adaptability to a complex and evolving environment </li></ul><ul><li>Culturally aware and strong interpersonal skills </li></ul><ul><li>Able to manage sensitive cases with discretion and integrity </li></ul>  Language Proficiencies  <ul><li>Native Polish </li></ul><ul><li>Fluent English </li></ul>  Location  <ul><li>Main location: Nysa </li></ul><ul><li>Minimum 3 days per week onsite </li></ul><ul><li>Increased onsite presence during onboarding period </li></ul>  Contract  <ul><li>Start date: ASAP </li></ul><ul><li>First contract of 6 months, extension possible </li></ul>

HR Business Partner

Control & Instrumentation Engineer for Battery Projects (Battery Planning) Voerde & Biblis 01/05/2026 – 31/12/2028    Key Responsibilities: <ul><li>Development and preparation of C&I concept designs.</li><li>Translation of project requirements into technical specifications.</li><li>Coordination of internal and external C&I interfaces in line with project requirements.</li><li>Preparation of the technical section of tender documentation.</li><li>Identification of required components for the C&I system and definition of specifications, considering standards, best engineering practices, and RWE experience.</li><li>Development of a project schedule for procurement, engineering, installation, and commissioning of the C&I system.</li><li>Technical evaluation of supplier bids.</li><li>Support during contract negotiations.</li><li>Reporting on the technical project status to the Project Manager.</li><li>Execution of design reviews.</li><li>Management of technical interfaces with other disciplines/work packages, contractors, and stakeholders.</li><li>Preparation, review, and approval of technical C&I documentation.</li><li>Preparation and organization of all technical documentation required for installation and commissioning, and handover to the Site Manager.</li><li>On-site supervision when activities fall within own responsibility or when specific project team support is required.</li></ul>  Key Qualifications <ul><li>Relevant professional expertise in control and communication engineering planning.</li><li>Ability to quickly become familiar with BESS-specific control systems, including:</li><li>Battery Control System (BCS)</li><li>Energy Management System (EMS)</li><li>SCADA systems</li><li>Remote control interfaces (control room, operations and maintenance, grid operator)</li><li>C&I data networks</li><li>IT/OT infrastructure</li><li>Plant monitoring systems (e.g., CCTV systems, fire alarm systems, intrusion detection systems, electronic access control)</li><li>Proficient knowledge of MS Office applications.</li><li>Strong communication skills and ability to work collaboratively in a team.</li><li>Independent and self-driven working style.</li><li>Responsibility for lead execution of C&I work packages.</li></ul>  German speaking is a must

Control and Instrumentation Engineer (Battery Planning)

Key Responsibilities: <ul><li>Development and preparation of C&I concept designs.</li><li>Translation of project requirements into technical specifications.</li><li>Coordination of internal and external C&I interfaces in line with project requirements.</li><li>Preparation of the technical section of tender documentation.</li><li>Identification of required components for the C&I system and definition of specifications, considering standards, best engineering practices</li><li>Development of a project schedule for procurement, engineering, installation, and commissioning of the C&I system.</li><li>Technical evaluation of supplier bids.</li><li>Support during contract negotiations.</li><li>Reporting on the technical project status to the Project Manager.</li><li>Execution of design reviews.</li><li>Management of technical interfaces with other disciplines/work packages, contractors, and stakeholders.</li><li>Preparation, review, and approval of technical C&I documentation.</li><li>Preparation and organization of all technical documentation required for installation and commissioning, and handover to the Site Manager.</li><li>On-site supervision when activities fall within own responsibility or when specific project team support is required.</li></ul>  Key Qualifications <ul><li>Relevant professional expertise in control and communication engineering planning.</li><li>Ability to quickly become familiar with BESS-specific control systems, including:</li><li>Battery Control System (BCS)</li><li>Energy Management System (EMS)</li><li>SCADA systems</li><li>Remote control interfaces (control room, operations and maintenance, grid operator)</li><li>C&I data networks</li><li>IT/OT infrastructure</li><li>Plant monitoring systems (e.g., CCTV systems, fire alarm systems, intrusion detection systems, electronic access control)</li><li>Proficient knowledge of MS Office applications.</li><li>Strong communication skills and ability to work collaboratively in a team.</li><li>Independent and self-driven working style.</li><li>Responsibility for lead execution of C&I work packages.</li></ul>  German speaking is a must

Control & Instrumentation Engineer Battery

Job Title: Electrical Commissioning Engineer Location: Milan, Italy Project Type: Data Centre Construction Duration: 1 year Rotation: 3 weeks on, 1 week off Job Summary We are seeking an experienced Electrical Commissioning Engineer to support the delivery and commissioning of a large-scale data centre project in Milan. The successful candidate will be responsible for ensuring that all electrical systems are installed, tested, and commissioned in accordance with project specifications, industry standards, and client requirements. Key Responsibilities<ul><li>Plan, coordinate, and execute commissioning activities for electrical systems, including:<ul><li>Medium and low voltage distribution systems</li><li>UPS systems and battery installations</li><li>Standby generators and associated controls</li><li>Switchgear, transformers, and protection systems</li><li>Earthing and lightning protection systems</li></ul></li><li>Develop and review commissioning plans, method statements, and procedures</li><li>Liaise with design teams, subcontractors, vendors, and client representatives</li><li>Witness and validate factory acceptance tests (FAT) and site acceptance tests (SAT)</li><li>Ensure proper integration and testing of electrical systems with mechanical and BMS systems</li><li>Troubleshoot and resolve technical issues during commissioning phases</li><li>Maintain detailed commissioning records, reports, and documentation</li><li>Ensure all activities comply with health, safety, and environmental regulations</li><li>Support handover processes, including training and documentation for operations teams</li></ul>Qualifications & Experience<ul><li>Bachelor’s degree in Electrical Engineering or related field</li><li>Minimum 5–8 years of experience in electrical commissioning, preferably on data centre or mission-critical projects</li><li>Strong knowledge of international standards (IEC, ISO) and commissioning best practices</li><li>Experience working for a general contractor or commissioning agent on large-scale construction projects</li><li>Familiarity with data centre infrastructure, redundancy (N 1, 2N), and reliability requirements</li><li>Proficient in reading and interpreting electrical schematics and technical drawings</li></ul>Skills & Competencies<ul><li>Strong analytical and problem-solving skills</li><li>Excellent communication and coordination abilities</li><li>Ability to work under pressure and meet tight project deadlines</li><li>Detail-oriented with a strong focus on quality and safety</li><li>Proficient in MS Office and commissioning/documentation tools</li></ul>Languages<ul><li>English (required)</li><li>Italian (preferred)</li></ul>Working Conditions<ul><li>Site-based role in Milan with potential extended working hours during critical commissioning phases</li><li>May require occasional travel to vendor sites for FAT inspections</li></ul>Reporting Line<ul><li>Reports to: Commissioning Manager / Project Manager</li></ul>Contract Type<ul><li>Contract</li></ul>Start Date<ul><li>As soon as possible</li></ul>Additional Requirements<ul><li>Valid EU work authorization</li><li>Relevant safety certifications (e.g., IOSH, NEBOSH preferred)</li></ul>Application Interested candidates should submit their CV along with details of relevant project experience, particularly within data centre or mission-critical environments.

Electrical Commissioning Engineer x2

A global engineering consultancy specialising in complex power system challenges, dedicated to providing high-quality solutions for the energy transition. Our multidisciplinary team of experts offers strategic, technical, and regulatory advice across all fields related to power transmission, as well as specialist solutions to a diverse international client base in the power sector. Your function We wish to reinforce our team working on Power System Operations and Security in the context of deep integration of renewable energy sources and Energy/Balancing Market Integration. To achieve this, we are looking for experienced professionals with expertise in transmission system operation. These experts will participate in local and international projects focusing on RES integration, security of supply, sustainability and economic efficiency of Power Systems. Typical activities involve (but are not limited to): <ul><li>Analysis and definition of operational principles;</li><li>Model definition and validation;</li><li>Steady-state analysis (load flow, short circuit calculations, etc.);</li><li>Dynamic stability analysis (frequency, voltage stability, etc.);</li><li>Grid Code requirement and connection compliance studies;</li><li>Support the analysis and evaluation of grid reliability and security (e.g., capacity calculation, balancing, operational planning);</li><li>Support business development teams in identifying and pursuing opportunities by establishing trusted relationships with clients and developing proposals.</li></ul> Your profile <ul><li>Master's degree in Engineering or Applied Mathematics/Physics;</li><li>10 years of experience in Power System Operations and Security (balancing and RES system integration, system operation and state-of-the-art technological solutions);</li><li>Expertise in translating complex data into key strategic insights and valuable actions;</li><li>Knowledge of power system simulation tools (PowerFactory, PSSE);</li><li>Fluent in English;</li><li>Additional language skills are considered a strong asset.</li></ul> For more information, do not hesitate to get in touch!

Senior Power System Expert

Responsibilities Include: • Co-coordinating and planning all payroll activities within the team • Processing and validating payroll mutations for the in-house payroll administration • Acting as a point of contact for colleagues regarding (flexible) employment conditions, CAO applications, and company policies • Working closely with departments such as Services, HR, Rewards & Benefits, and Tax • Proactively improving payroll services by identifying optimisation opportunities and executing both large and small improvement initiatives Who are you? • An MBO or HBO level qualification, for example in HRM or Finance, supplemented with payroll certifications such as PDL or VPS • Experience as a payroll supporter/administrator within a large, complex organisation • Knowledge of relevant HR and payroll legislation and regulations • Proficiency with HR systems; SAP experience is strongly preferred (SuccessFactors, HCM / ECP) • Strong MS Office skills, particularly Excel (formulas, filtering, sorting, etc.) and Microsoft Teams • Experience with project-based working and a continuous-improvement mindset, with the ability to oversee and connect the full HR chain • High level of accuracy and attention to detail, striving for 100% quality and structured work • Strong prioritisation skills and the ability to work independently • Excellent analytical and communication skills, enabling effective stakeholder engagement • Proactive and improvement-driven attitude, taking initiative to optimise processes • Strong command of both Dutch and English, written and spoken

Payroll Specialist

You will set up, lead, and manage several large projects within a defined scope, ensuring that project results are delivered in accordance with agreed objectives, requirements, and criteria, in an efficient manner and in line with TenneT standards. Key Responsibilities<ul><li>Preparing project plans, aligning plans and budgets with the client, translating the project plan into execution and project control plans, and establishing the project organisation</li><li>Performing overall project management and reviewing, assessing, and accepting deliverables from suppliers and consultants</li><li>Managing and coaching project team members (site managers, planners, and engineers) and external resources, and resolving organisational and technical issues</li><li>Directing work package owners to ensure the entire project is delivered in accordance with plan</li><li>Preparing decision documents, evaluations, and reports, and ensuring compliance with quality, occupational health & safety (HSE), and environmental requirements</li><li>Providing progress and performance reports to the client</li><li>Coordinating and managing project matters with internal and external stakeholders, including other TenneT business units, regional grid operators, authorities, permitting bodies, companies, and private parties</li></ul>What Do You Bring?<ul><li>HBO / Master’s level of working and thinking, with at least a completed HBO degree</li><li>At least 5 years of recent experience successfully leading very large and complex (electro-)technical and/or infrastructure projects, preferably within the energy sector</li><li>Extensive experience with project-based working according to PRINCE2</li><li>Significant experience with various contract forms; demonstrable knowledge and experience with UAV-GC contracts and Systems-Oriented Contract Management (SCB) is a strong advantage</li><li>Experience on both the contractor and client side is an asset</li><li>Excellent communication and negotiation skills, with the ability to organise and (ensure) effective planning of activities</li><li>Recognised by others as professional, environmentally aware, decisive, and independent</li><li>Excellent command of Dutch and good command of English, both written and spoken</li><li>Additional key competencies: anticipation, prioritisation, and predictability</li></ul>

Project Manager

Cost Engineer Sofia, Vanguard and Dogger Bank Swindon – hybrid work options available 13/04/2026 – 30/11/2026 Key Responsibilities: <ul><li>Creation and administration of forecasts for the costs of the Offshore wind projects, maintaining a schedule of the forecast cash flow from the Investment decision to final completion</li><li>Record and monitor the financial impact of change requests and communicating outcomes and consequences with the Project Management Team.</li><li>Control and monitor project total expenditure including verifying and checking of invoices and claims from suppliers, vendors and sub-contractors to ensure that all project expenditures are captured and properly recorded.</li><li>Identify and monitor financial risks and clearly present these to the Project Finance Director</li><li>Support the monthly reporting including the preparation of financial information on the project for Project Financing requirements and shareholders as required.</li><li>FX hedge monitoring and maintaining inputs necessary for hedge accounting</li><li>Support the valuation of OFTO assets and input as necessary into the transaction process for the regulated divestment.</li><li>Ensure internal controls are being adequately applied e.g Delegation of Authority for client's investment spend , controls detailed in specific project shareholder agreements or local country specific procedures etc</li><li>Development and maintain good working relationships with all internal stakeholders as required to ensure clear visibility on the status of the tasks above to both project and line management.</li></ul> Key Qualifications: <ul><li>Knowledge and understanding of contract(s) of assigned packages for a construction project in the renewables market or comparable large infrastructure project is essential</li><li>Advanced Excel proficiency is essential</li><li>SAP or Similar ERP system knowledge is an advantage</li><li>English as a working language is essential, other European languages an advantage</li><li>Quantity surveyor qualification or similar an advantage</li><li>Good communication and organisational skills</li><li>Ability to work in a dynamic and global environment with an entrepreneurial attitude</li><li>Ability to manage relationships with a variety of stakeholders in a matrix organisation</li></ul> Must have Qualification / Experience: <ul><li>Project and Cost management, Advanced Excel. Experience in energy construction projects</li></ul> Nice to have: <ul><li>SAP, QS</li></ul>

Cost Engineer

Category Manager Duration: 28/04/2026 to 31/12/2026 Location: Antwerp Rotation: Monday-Friday, 8 hours Type: Freelance contract Description: Client information <ul><li>This client is a world leader in the highly specialised fields of dredging, solutions for the offshore energy market, infra marine and environmental works. With more than 140 years of experience and 5,200 highly skilled professionals, we bring tailor-made solutions, innovation and new technologies to our customers’ projects, ensuring that they are performed safely, efficiently and cost-effectively.</li></ul> Department Description and responsibilities <ul><li>As a Category Manager Auxiliary Equipment at company corporate procurement you will develop and implement category strategies that contribute to cost efficiency, service quality, and sustainability, in line with the company's broader procurement objectives. You will collaborate with internal stakeholders and project teams worldwide to achieve the best solutions and promote best practices within the organization. You will report to the Lead Category Manager "Shipyards, Machinery & Equipment" and lead a team of Category buyers and Operational buyers.</li></ul> Primary Tasks and responsibilities <ul><li>Develop and execute a category strategy to optimize cost, quality, and efficiency</li><li>Manage relationships with internal stakeholders;</li><li>Guide and lead a team of Category Buyers and Operational buyers to execute procurement activities in accordance to agreed service levels;</li><li>Get directly involved in high value / critical spot buys and framework agreements;</li><li>Manage performance of category team reporting and tracking KPI’s;</li><li>Conduct market research (knowledge of suppliers, state-of-the-art technology, etc.)</li><li>Develop and sustain supplier relationships with key suppliers</li><li>Ensure compliance with sourcing procedures and contract management;</li><li>Monitor market trends and identify opportunities for process improvements, cost reductions, and innovation.</li></ul> Technical profile requirements <ul><li>Minimum 10 years of experience in strategic purchasing, category management or logistics management</li><li>Experience in the maritime and/or civil infrastructure company is a plus</li><li>Proven experience in coaching and leading a team;</li><li>Strong commercial and negotiation skills with the ability to manage high-value contracts.</li></ul> Non-Technical profile requirements <ul><li>Fluent in English; additional languages are a plus;</li><li>A strategic mindset, hands-on approach, and the ability to drive change;</li><li>Experience in supplier relationship management, contract negotiation, and procurement best practices;</li><li>A results-oriented team player with excellent stakeholder management and problem-solving skills;</li><li>Ability to thrive in a dynamic, international environment.</li></ul> Methodology/Certification requirements <ul><li>Bachelor’s or Master’s degree in engineering, Business Administration, Applied Economics, or Supply Chain Management;</li></ul> Language proficiencies <ul><li>Native English, proficiency in Dutch is a plus</li></ul>

Category Manager

If you’re the kind of engineer who wants to take real ownership of commissioning — not just tick boxes — this should get your attention. We’re delivering a major data centre project in Milan. It’s fast‑paced, highly technical and full of the sort of moving parts where strong commissioning leadership makes or breaks the job. That’s why we’re looking for a Mechanical Commissioning Lead who knows how to bring systems online properly, manage multiple specialists, and keep both the quality and the momentum exactly where they need to be. What You’ll Do You’ll be the person who makes sure the commissioning doesn’t just happen — it happens in the right sequence, with the right documentation, and to the standard the client expects. That includes:<ul><li>Reviewing IFC drawings, specs and technical submittals</li><li>Working closely with the PM and QS on any commissioning‑related cost impacts</li><li>Mentoring junior engineers and supporting their development</li><li>Developing and implementing the commissioning plan</li><li>Coordinating commissioning with planners, package engineers and vendors</li><li>Attending client commissioning meetings and ensuring alignment</li><li>Getting all descriptions of operations and setpoints approved</li><li>Ensuring checklists, scripts, and documentation meet client standards</li><li>Managing specialist vendors and ensuring their activities align with programme</li><li>Verifying and witnessing commissioning activities</li><li>Running and updating commissioning trackers, logs and weekly progress reports</li><li>Leading walkdowns, tag walks and system sign‑off</li><li>Managing snag lists and ensuring issues are closed out quickly</li><li>Ensuring client training is completed on schedule</li></ul> Quality & Risk You’ll help define system boundaries, manage benchmarks, oversee test packs, and ensure everything is accurate, compliant and ready for inspection. You’ll also take a proactive role in identifying risks, reporting them clearly, and helping the project team stay ahead of possible delays. Communication & Commercial Awareness You’ll issue weekly commissioning and risk reports, advise on potential variations, and work closely with QS and PM teams to avoid surprises. Clear communication is essential — especially when something might impact programme. Who This Suits If you like being the person who brings systems to life, who spots issues early, and who knows how to manage commissioning in a structured but practical way — you’ll thrive here. Data centre experience is an advantage, but strong commissioning leadership and mechanical expertise matter most. You’ll enjoy this role if you prefer action over bureaucracy, responsibility over hand‑holding, and clarity over chaos.

Mechanical Commissioning Lead

ICP Project Manager – Utility Scale Projects – Remote with travel Earthstream Global is working with and international renewables EPC that is seeking an experienced ICP Project Manager to take ownership of 132 kV grid connection projects across the UK. This position will suit a self-sufficient professional who is confident managing projects relating to ICP's, and ensuring delivery against programme, cost, and quality expectations. You will work closely with internal project teams, ICPs, DNOs, suppliers, and clients, playing a critical role in the successful delivery of 132kV grid connection works nationwide. Key Responsibilities: <ul><li>Manage 132kV grid connection scopes of projects during the construction phase.</li><li>Lead and manage Independent Connection Providers (ICPs), holding contractors accountable for delivery and performance.</li><li>Managing and negotiating contracts with ICP's.</li><li>Support responses to RFQs for HV and grid connection works, including sourcing quotations from ICP's and HV equipment suppliers.</li><li>Collaborate with internal stakeholders to develop project budgets and client proposals.</li><li>Drive continuous improvement and optimisation of grid connection processes.</li></ul> Skills and experience: <ul><li>Strong experience delivering electrical projects specifically relating to 132kV substations and grid connections.</li><li>Good experience managing renewable projects, Solar, BESS, Wind</li><li>Proven experience gained within an ICP, DNO, Solar, BESS, Wind EPC environment.</li><li>Excellent written and verbal communication skills, with the ability to manage multiple projects simultaneously.</li><li>Highly organised with strong time management and attention to detail.</li><li>Strong interpersonal skills with the ability to build trusted internal and external relationships.</li><li>Industry recognised Project Management certification/qualification.</li><li>Willingness to travel across the UK</li></ul> This role requires an experienced professional who can operate autonomously while representing the business confidently with contractors and stakeholders.

ICP Project Manager

Job Summary The HSE (Health, Safety & Environment) Manager is responsible for leading and managing all HSE activities on a pharmaceutical manufacturing site. The role ensures full compliance with Irish legislation and global pharma standards while promoting a strong safety culture and minimizing operational risks. Key Responsibilities 1. HSE Strategy & Compliance<ul><li>Develop, implement, and maintain HSE policies and procedures.</li><li>Ensure compliance with Irish regulations (HSA, EPA) and international standards (ISO 45001, ISO 14001, GMP).</li><li>Act as the main contact for regulatory authorities and external auditors.</li></ul>2. Risk Management<ul><li>Conduct risk assessments, hazard analysis, and safety audits.</li><li>Implement corrective and preventive actions to mitigate risks.</li><li>Monitor workplace conditions to ensure safe operations.</li></ul>3. Site Safety Leadership<ul><li>Promote a strong safety culture across all departments.</li><li>Lead HSE initiatives, campaigns, and continuous improvement programs.</li><li>Provide leadership and guidance to HSE teams and site personnel.</li></ul>4. Incident & Emergency Management<ul><li>Lead investigations of incidents, accidents, and near misses.</li><li>Develop and manage emergency response plans and drills.</li><li>Ensure proper reporting and documentation of all HSE incidents.</li></ul>5. Training & Awareness<ul><li>Deliver HSE training programs (inductions, toolbox talks, SOPs).</li><li>Ensure all employees understand safety procedures and compliance requirements.</li><li>Maintain training records and competency matrices.</li></ul>6. Environmental Management<ul><li>Monitor environmental impact, waste management, and emissions.</li><li>Ensure compliance with environmental permits and sustainability goals.</li><li>Manage hazardous materials and chemical safety (SDS, labeling, storage).</li></ul>7. Reporting & Documentation<ul><li>Prepare HSE reports, KPIs, and audit documentation.</li><li>Maintain accurate records for inspections and regulatory compliance.</li><li>Track performance metrics and drive continuous improvement.</li></ul>Requirements Education & Qualifications<ul><li>Degree in Occupational Health & Safety, Environmental Science, Engineering, or related field</li><li>NEBOSH / IOSH certification (essential)</li><li>Knowledge of GMP and pharmaceutical regulations</li></ul>Experience<ul><li>5 years HSE experience, preferably in pharmaceutical or life sciences industry</li><li>Experience in managing HSE systems in manufacturing environments</li></ul>Skills<ul><li>Strong knowledge of Irish HSE legislation</li><li>Excellent leadership and communication skills</li><li>Risk assessment and incident investigation expertise</li><li>Strong analytical and problem-solving abilities</li></ul>

HSE Manager

Job Title: Commissioning Manager – Data Centre Project Location: Finland (site-based) Reporting To: Project Director / Project Manager Employment Type: Full-time Role Overview The Commissioning Manager is responsible for planning, coordinating, and managing all commissioning activities on a large-scale data centre project. This role ensures that all mechanical, electrical, and control systems are installed, tested, and commissioned in accordance with project requirements, client specifications, and Finnish regulatory standards. The Commissioning Manager plays a critical role in delivering a fully operational, reliable, and efficient facility, ready for handover to the client. Key Responsibilities Commissioning Strategy & Planning<ul><li>Develop and implement the overall commissioning strategy, programme, and deliverables</li><li>Define commissioning scope, responsibilities, and sequencing in alignment with construction schedules</li><li>Establish commissioning procedures, checklists, and documentation requirements</li></ul>System Commissioning & Integration<ul><li>Oversee commissioning of all MEP systems, including:<ul><li>Electrical distribution (MV/LV, transformers, switchgear)</li><li>UPS systems and backup generators</li><li>Mechanical systems (HVAC, CRAH/CRAC units, chilled water systems)</li><li>BMS/EPMS and control systems</li></ul></li><li>Ensure proper integration and interoperability of all systems</li></ul>Level Testing & Validation<ul><li>Manage all levels of commissioning (Level 1–5), including:<ul><li>Factory Acceptance Testing (FAT)</li><li>Site Acceptance Testing (SAT)</li><li>Integrated Systems Testing (IST)</li></ul></li><li>Lead and coordinate performance and load bank testing</li></ul> Coordination & Stakeholder Management<ul><li>Coordinate with subcontractors, vendors, consultants, and client representatives</li><li>Chair commissioning meetings and provide progress updates</li><li>Interface with utility providers and local authorities as required</li></ul>Quality Assurance & Compliance<ul><li>Ensure all commissioning activities comply with:<ul><li>Project specifications</li><li>Finnish electrical and mechanical regulations</li><li>EU standards and industry best practices</li></ul></li><li>Review and approve method statements, risk assessments, and commissioning documentation</li></ul>Programme & Risk Management<ul><li>Monitor commissioning progress against the project schedule</li><li>Identify risks and implement mitigation strategies</li><li>Support recovery plans to maintain project milestones</li></ul>Documentation & Handover<ul><li>Oversee preparation and completion of commissioning documentation, including:<ul><li>Test scripts and reports</li><li>O&M manuals</li><li>As-built drawings</li></ul></li><li>Ensure systems are fully documented and ready for client handover</li></ul>Health, Safety & Environmental Compliance<ul><li>Promote a strong safety culture during all commissioning activities</li><li>Ensure adherence to site HSE policies, including permit-to-work and LOTO procedures</li><li>Conduct audits and inspections of commissioning activities</li></ul>Key Requirements Qualifications<ul><li>Degree or equivalent in Electrical or Mechanical Engineering (or related discipline)</li><li>Professional certifications in commissioning or project management are advantageous</li></ul> Experience<ul><li>Minimum 8–12 years’ experience in commissioning or MEP project delivery</li><li>Proven track record delivering data centre or other mission-critical projects</li><li>Experience working for a general contractor or EPC environment</li></ul>Technical Expertise<ul><li>Strong knowledge of data centre infrastructure and critical systems</li><li>Experience with commissioning processes, including IST and reliability testing</li><li>Familiarity with BMS/EPMS systems and controls integration</li></ul>Regulatory Knowledge<ul><li>Understanding of Finnish regulations and European standards</li><li>Experience coordinating with utilities and local authorities preferred</li></ul>Soft Skills<ul><li>Strong leadership and team coordination abilities</li><li>Excellent communication and stakeholder management skills</li><li>Problem-solving mindset with attention to detail</li><li>Ability to perform under pressure and meet tight deadlines</li></ul>Additional Requirements<ul><li>Fluent in English (Finnish is advantageous)</li><li>Willingness to be site-based in Finland for project duration</li><li>Flexibility to work extended hours during critical commissioning phases</li></ul>What’s on Offer<ul><li>Competitive salary</li><li>Accommodation, travel, and rotation options</li><li>Opportunity to work on a high-profile hyperscale data centre</li><li>Long-term opportunities in mission-critical project delivery</li></ul>

Commissioning Manager

Job Title: Senior Authorised Person (SAP) – Data Centre Project Location: Finland Reporting To: Electrical Project Manager Employment Type: Full-time Role Overview The Senior Authorised Person (SAP) is responsible for the safe management, control, and execution of electrical systems on a large-scale data centre project. This role ensures compliance with local Finnish regulations, project specifications, and industry best practices, while overseeing energisation, isolation, and operational safety of high- and low-voltage systems. Key Responsibilities Electrical Safety & Authorisation<ul><li>Act as the Authorised Person for HV/LV systems in accordance with project and statutory requirements</li><li>Implement and manage safe systems of work, including permit-to-work (PTW), lockout/tagout (LOTO), and switching procedures</li><li>Control and approve all electrical isolations and energisation activities</li></ul>Switching Operations<ul><li>Plan, coordinate, and execute HV/LV switching operations</li><li>Prepare and review switching schedules, method statements, and risk assessments</li><li>Maintain accurate switching logs and system status records</li></ul>Commissioning & Energisation<ul><li>Support commissioning teams during testing and energisation phases</li><li>Witness and approve energisation of critical systems (UPS, transformers, switchgear, generators)</li><li>Ensure readiness of systems prior to energisation, including documentation and safety compliance</li></ul>Compliance & Standards<ul><li>Ensure all activities comply with Finnish electrical safety regulations and EU standards</li><li>Interface with local authorities, utility providers, and third-party inspectors</li><li>Conduct audits and inspections to ensure adherence to safety procedures</li></ul> Coordination & Leadership<ul><li>Liaise with design teams, subcontractors, and client representatives</li><li>Provide technical guidance on electrical safety and operational procedures</li><li>Mentor junior authorised persons and site engineers</li></ul>Documentation & Reporting<ul><li>Maintain up-to-date electrical safety documentation, permits, and system drawings</li><li>Produce reports on switching activities, incidents, and system status</li><li>Ensure red-line drawings and as-built documentation are accurate</li></ul>Key Requirements Qualifications<ul><li>Recognised electrical engineering qualification (Degree, HND, or equivalent)</li><li>Authorised Person / Senior Authorised Person certification (HV/LV)</li><li>Strong knowledge of data centre electrical infrastructure</li></ul>Experience<ul><li>Minimum 7–10 years’ experience in electrical engineering, with significant time in SAP/AP roles</li><li>Proven experience on data centre, mission-critical, or large industrial projects</li><li>Experience working with general contractors or EPC environments</li></ul>Technical Skills<ul><li>In-depth knowledge of HV/LV systems up to 33kV</li><li>Familiarity with UPS systems, backup generators, and critical power distribution</li><li>Strong understanding of commissioning and energisation processes</li></ul>Regulatory Knowledge<ul><li>Knowledge of Finnish electrical safety standards and European norms</li><li>Experience working with local utilities and grid connection requirements is highly desirable</li></ul>Soft Skills<ul><li>Strong leadership and decision-making under pressure</li><li>Excellent communication and coordination skills</li><li>High attention to detail and safety-first mindset</li><li>Ability to work in a multicultural, fast-paced project environment</li></ul>Additional Requirements<ul><li>Fluency in English (Finnish is a strong advantage)</li><li>Willingness to work on-site in Finland for project duration</li><li>Flexibility to work shifts or extended hours during critical energisation phases</li></ul>What’s on Offer<ul><li>Competitive salary </li><li>Accommodation and travel allowance</li><li>Opportunity to work on a high-profile data centre project</li><li>Long-term career development in mission-critical construction</li></ul>

Senior Director – Global Sales (Connectivity & Network Infrastructure) Location: Flexible / Remote (Portugal/Spain/France or Ireland) Type: Full-time About the Role We are seeking an experienced Senior Sales Director to lead global sales activities for high‑performance connectivity and network infrastructure solutions. This is a senior, hands‑on role suited to a commercially driven leader who thrives in a fast‑growing, international environment. You will own the full sales lifecycle, drive revenue growth across multiple customer segments, and play a key role in shaping commercial strategy as the business continues to scale globally. Key Responsibilities<ul><li>Build, manage, and convert a robust global sales pipeline across telecom operators, ISPs, content providers and enterprise customers</li><li>Lead complex, high‑value sales cycles from opportunity identification through to contract execution</li><li>Balance new business development (hunter) and account growth (farmer) responsibilities across direct and partner channels</li><li>Prepare and negotiate commercial offers, pricing structures, SLAs, and MSAs</li><li>Deliver accurate forecasting, pipeline reporting, and sales performance updates against targets</li><li>Track market trends, customer feedback, and competitive intelligence to inform strategy</li><li>Collaborate closely with technical, operations, and leadership teams in a cross‑functional, multicultural setup</li><li>Represent the business at customer meetings and industry events globally</li></ul>Experience & Background<ul><li>Minimum 5 years’ experience in senior B2B sales within telecommunications, connectivity, subsea or terrestrial infrastructure, or related network services</li><li>Proven track record of closing complex, international, high‑value deals</li><li>Strong understanding of network technologies such as IP, optical/DWDM, data centres, and capacity services</li><li>Experience managing long sales cycles with multiple technical and commercial stakeholders</li><li>Comfortable operating independently in a remote, entrepreneurial environment</li></ul>Skills & Attributes<ul><li>Commercially astute, results‑driven and highly organised</li><li>Excellent negotiation, communication, and relationship‑building skills</li><li>Strategic mindset with the ability to execute tactically</li><li>Analytical and data‑driven approach to forecasting and pipeline management</li><li>Fluent English required; additional languages are advantageous</li><li>Willingness to travel internationally as required</li></ul>Tools & Qualifications<ul><li>Experience using CRM tools such as Salesforce (or equivalent)</li><li>Strong working knowledge of Microsoft Office (Excel, PowerPoint)</li><li>Bachelor’s or Master’s degree in Engineering, Telecommunications, Business or a related field preferred</li></ul>

Sales Director

Wind Turbine Generator Package Manager Location: Base Location can be either Swindon or London. Role is to support a project in Japan - Some international travel will be needed. Duration: 04/05/2026 to 02/04/2027 Rotations: Monday-Friday, 8 hours a day Project: Noshiro Mitane Type: Freelance contract – outside IR35 Description: The WTG Package Manager is accountable for the planning and delivery (engineering, procurement, construction, manufacturing, installation, commissioning and Taking-Over ) of the wind turbine Package of Works until handover to Operations, including the management of HSE, scope, risk, quality, budget, resource, and time scheduling in line with the project objectives and governance, with a view of LCoE optimisation. Key tasks and responsibilities: In particular, but not limited to: • provides HSSE leadership and ensures that HSSE is managed throughout the package by all team members and contract partners in accordance with the company’s established HSSE principles; • leads a team of experts assigned to the package and promotes a collaborative, transparent and supportive culture within the package and their interaction with other project roles; • manages the package in accordance with the company’s essential behaviours, established standards for project management, quality and within the project’s Delegation of Authority; • ensures clear lines of communication internally and with external contract partners; • oversees the engineering process and ensures that safety in design and operational aspects are adequately considered; • oversees the procurement process (tender, supplier selection and contract negotiation) until contract signature; • serves as Employer Representative under the Conditions of Contract; • manages the overall package budget; • identifies and manages package risks and opportunities; • ensures compliance with internal policies and external legislation; • fosters knowledge exchange with other projects and ensures that lessons • learnt are implemented, whilst capturing future lessons learnt during the • package life cycle; and • recognises the Operation team as the end customer and ensures that the WTG package can be operated / maintained in a safe and efficient manner. Qualifications and Experience • Engineering degree from an accredited university in a relevant subject (Civil, Structural, Mechanical, Ocean, Naval, etc); • Circa 10 years relevant industry experience; • Professional Engineer / Project Manager, with experience managing design and or engineering teams; • Experience in Offshore Wind, Onshore Wind, Offshore Oil and Gas, or other large engineering infrastructure projects; • Proven experience in major contract negotiations and contract management of large infrastructure projects (ideally offshore wind); • Excellent logical thinker, communicator, organiser, package lead and team player; • Demonstrable experience of working effectively in an international business; and • Fluent in spoken and written English (Japanese is desirable, but not essential).

WTG Package Manager

🚧 WE ARE HIRING: SENIOR SITE MANAGER 🚧 📍 Location: Bergrheinfeld Construction Site 🏗️ Sector: Energy / EPC Projects We are looking for an experienced Senior Site Manager (P3 level) to lead the execution of large-scale, complex construction projects within the energy sector. This is a key leadership role responsible for delivering projects safely, on time, within budget, and to the highest quality standards. 🔹 About the Role As Senior Site Manager, you will oversee all site activities and act as the main interface between the customer, contractors, and stakeholders. You will ensure full compliance with contractual obligations, HSE regulations, and project quality standards while driving strong execution performance on site. You will also manage multiple workstreams, coordinate teams, and ensure seamless integration of construction, installation, and commissioning activities. 🔹 Key Responsibilities <ul><li>Act as primary site interface for customers and local authorities</li><li>Lead and coordinate site workforce to achieve project milestones</li><li>Ensure clear understanding of Scope of Work (SoW) and Division of Work (DoW) across teams</li><li>Manage change requests, variation orders, and subcontractor coordination</li><li>Ensure all testing and commissioning activities meet contractual requirements</li><li>Drive strict adherence to Health, Safety & Environment (HSE) standards</li><li>Oversee quality assurance, documentation, and compliance processes</li><li>Manage permits, licenses, and regulatory requirements</li><li>Control project schedule, budget, and cost performance</li><li>Ensure contractual obligations are fulfilled to customer satisfaction</li><li>Lead execution on large EPC converter station and consortium projects</li></ul>🔹 Requirements <ul><li>Bachelor’s degree in Mechanical, Electrical, or Civil Engineering</li><li>Minimum 6 years’ experience as Site Manager / Senior Site Manager in construction (energy sector or large-scale infrastructure projects preferred)</li><li>Strong experience in civil works, installation, and/or commissioning</li><li>Solid knowledge of HSE regulations and certified HSE experience</li><li>Strong commercial awareness and contract management skills</li><li>Excellent organizational, leadership, and communication abilities</li><li>Fluent in German and English (B2–C1 minimum)</li><li>Valid driving licence required</li></ul>

Senior site manager - Senior Bauleiter (

Site Adminstrative Coordinator  Position: Fixed-term project contract (CDIC) Location: Bricquebec-en-Cotentin (Normandy), on-site 5 days/week The Opportunity The Site Administrative Coordinator supports the Site Manager and the entire site team with all administrative tasks. They contribute to maintaining a structured and organized site office, apply approved operational and project processes, and enable technical teams to focus on their core activities. The Site Coordinator maintains an overall view of site processes and resources, identifies low value-added activities, and optimizes operations within their scope of responsibility. They report hierarchically to the Project Site Manager to whom they are assigned, and functionally to the Head of Construction & Commissioning (C&C) Site Support. Depending on workload, this role may be combined with that of Site Document Controller and/or Site Logistics Coordinator. Your Impact • Collect, organize, and manage progress reports • Contribute to the creation of presentations (progress, site, project, management) • Participate in meetings, write and distribute minutes, and follow up on actions • Carry out or coordinate site onboarding and support new employees • Monitor timesheets and working hours; maintain history (tables, charts) and share with relevant departments • Maintain an up-to-date register of the client personnel on site • Provide reporting support to the site team • Implement operational processes and contribute to continuous improvement • Identify and eliminate non-value-added activities • Maintain records, databases, filing systems, and archives (paper and electronic) • Perform various general administrative tasks and provide backup during absences or workload peaks • Organize or coordinate document translation • Track delivery status • Manage shipment and receipt of parcels • Administer housing, site vehicles, and local transportation • Manage site offices and facilities • Introduce new arrivals to administrative processes and site routines • Maintain regular contact (as authorized) with local suppliers and subcontractors (cleaning, security, etc.) • Monitor office supplies and availability of visitor PPE • Coordinate travel arrangements for staff and visitors with mobility services and construction/commissioning managers Your Profile Education: Bachelor’s degree (Bac 2 / Bac 3 equivalent) in: • Administration • Business Support / Office Management • Logistics • Project Management • QHSE Support • Operational Support Experience: 2 to 5 years of experience in one or more of the following areas: • Site administration • Project coordination / support • Site office management • Logistics and document management • Support to construction / commissioning / engineering teams Experience in a construction / energy / EPC / industrial environment is a strong advantage. Languages: • French and English: good level required (interaction with international teams, suppliers, and visitors) • Can be a contract or a perm position open for both

Site Administrative Coordinator

We are seeking a Marine Engineering / Electrical Technical Consultant with proven experience delivering Dynamic Positioning (DP) System assurance across diverse vessel types and client groups. You will support assurance activities, attend vessels, produce high‑quality technical reports, and contribute expertise across both traditional offshore energy and growing renewable sectors. This is a short-term contract (2–3 months) with strong potential for extension depending on project pipeline and performance. Key Responsibilities <ul><li>Conduct and support DP System FMEA and Proving Trials authoring, review, verification, and validation.</li><li>Attend vessels as an independent witness, recording results from approved trials programmes.</li><li>Review and develop FMEA and Trials Programmes in line with industry guidelines (IMCA M190 / M191).</li><li>Produce robust, clear, and client‑ready technical reports.</li><li>Provide client-facing support, including offshore or onsite attendance as needed.</li><li>Support projects involving closed-bus power systems, battery/hybrid installations, and related technologies.</li><li>Develop marine operating procedures, method statements, and risk assessments.</li><li>Perform SIMOPS assessments and marine risk evaluations for multi-vessel operations.</li><li>Ensure all work aligns with assurance standards and relevant industry guidance.</li></ul>About You You are a technically strong, client-focused consultant with a background in marine operations. You should bring experience from offshore support vessels such as Drillships, Dive Vessels, PLVs/CLVs, AHTS, or SOVs, ideally at the level of: <ul><li>Chief Engineer / Second Engineer / Electrician / ETO</li></ul>Requirements <ul><li>Strong understanding of marine regulatory/statutory requirements (Class rules), industry standards, and guidelines (IMCA / OCIMF / MTS).</li><li>Offshore medical fitness (ENG1 or OEUK), or ability to obtain.</li><li>Strong client‑facing communication skills and commercial awareness.</li><li>Ability to simplify technical issues and advise clients confidently.</li><li>Proactive, self‑driven, and responsive to project timelines.</li><li>Right to live and work in the UK.</li><li>Offshore safety certification desirable (BOSIET / FOET / GWO).</li><li>Fluent English, both written and verbal.</li></ul>

Marine Engineering Technical Consultant

Job Title: NDT Technician – Wind Turbine Blade Data Analyst Location: Wind Turbine Blade Manufacturing Facility (Factory Environment) Department: Quality Assurance / Non-Destructive Testing (NDT) Job Description The NDT Technician is responsible for analysing inspection data from non-destructive testing (NDT) processes carried out on wind turbine blades during manufacturing. The role focuses on evaluating inspection results, identifying defects or anomalies within composite structures, and ensuring that blades meet quality and safety standards before leaving the factory. Working closely with inspection teams, engineers, and quality control personnel, the technician reviews data from advanced NDT methods such as Phased Array Ultrasonic Testing (PAUT), Time of Flight Diffraction (TOFD), and other inspection technologies used in composite blade manufacturing. Key Responsibilities<ul><li>Analyse and interpret NDT inspection data from wind turbine blade components.</li><li>Review PAUT, UT, and other NDT scan results for structural defects such as:<ul><li>Delamination</li><li>Voids</li><li>Debonding</li><li>Cracks</li><li>Adhesive failures</li></ul></li><li>Evaluate B-scan, C-scan, and A-scan data from ultrasonic inspection systems.</li><li>Use specialised software (e.g., OmniPC, OmniScan, or similar) to review and analyse scan results.</li><li>Identify and map defects within blade structures including spar caps, shear webs, leading edge, and trailing edge sections.</li><li>Prepare detailed inspection reports in accordance with company and industry standards.</li><li>Document inspection findings and classify indications based on acceptance criteria.</li><li>Communicate results to production, engineering, and quality assurance teams.</li><li>Support root cause analysis and quality improvement initiatives within the manufacturing process.</li><li>Ensure compliance with industry standards, internal procedures, and quality requirements.</li><li>Maintain accurate records of inspection data and reports.</li></ul>Required Qualifications<ul><li>Certification in Non-Destructive Testing (NDT) Level 2 or equivalent (e.g., PCN / ISO 9712 / ASNT).</li><li>Experience with ultrasonic testing methods, particularly Phased Array Ultrasonic Testing (PAUT).</li><li>Knowledge of composite materials used in wind turbine blade manufacturing.</li><li>Experience analysing ultrasonic scan data and interpreting inspection results.</li><li>Familiarity with NDT inspection software and data analysis tools.</li><li>Strong attention to detail and analytical skills.</li><li>Ability to prepare clear and accurate technical reports.</li></ul>Preferred Experience<ul><li>Experience in wind turbine blade manufacturing or inspection.</li><li>Experience analysing composite blade structures (spar caps, shear webs, bond lines).</li><li>Knowledge of automated scanning systems and crawler inspection equipment.</li><li>Familiarity with industry inspection procedures from turbine manufacturers.</li></ul>Key Skills<ul><li>NDT data analysis</li><li>Ultrasonic testing interpretation</li><li>Composite materials inspection</li><li>Technical reporting</li><li>Quality control and defect evaluation</li><li>Problem solving and analytical thinking</li><li>Communication and teamwork</li></ul>

NDT Technician

Party Chief – Senior Duration: 01/07/2026 to 02/12/2026 Rotation: 4/4 Location: International Waters (Netherlands) Description: Client information This client is a world leader in the highly specialised fields of dredging, solutions for the offshore energy market, infra marine and environmental works. With more than 140 years of experience and 5,200 highly skilled professionals, we bring tailor-made solutions, innovation and new technologies to our customers’ projects, ensuring that they are performed safely, efficiently and cost-effectively. Department Description and responsibilities The Party Chief Will be involved only with the inshore section survey works during project mobilization, execution, as built and demobilization phase. Primary Tasks and responsibilities - Responsible for the execution of all survey related works involved on the Project. - Ensure that the survey activities are planned and performed according to the quality, HSE procedures. - QA/QC all survey data. - Check all data meets project specific requirements. - Distribute all data needed to support cable laying and trenching vessel. - Distribute the data to the Company according to delivery schedule. - Discuss and communicate the survey results with the Project Team. - Prepare GIS Data. - Solving problems with survey equipment and software, - Reports to Chief Surveyor. Technical profile requirements -Minimum 5 years’ experience as a Party Chief -Work experience for cable shore pull and installation and dredging operations: Total station experiences - Network experiences - Octans & GNSS experiences, -Strong knowledge of hydrographic survey techniques, equipment and trenching -Experience with offshore navigation and positioning systems (Bricscad, Qinsy, Civil3D, QGIS / Arcgis Pro, DTPS, NavaQ, Tendo -Additional experience with subsea acoustic positioning systems and multibeam. Non-Technical profile requirements -Excellent problem-solving and analytical skills. -Effective communication and teamwork abilities. -Attention to detail and a commitment to producing accurate results. -Willingness to work in various locations and adapt to project-specific requirements Methodology/Certification requirements -Bachelor’s degree in surveying, Geomatics, or a related field. Certifications required: -Full GWO -Offshore medical - (other certificates to be confirmed) Language proficiencies -Fluent speaking and writing English, proficiency in other languages is a major plus

Party Chief Senior

HRSG Field Engineer - TN Start Date: ASAP Project Duration: Approximately 8 months Summary Our client is seeking a qualified and experienced HRSG Field Engineer to support HRSG installation and commissioning activities on a power plant project in Tennessee. The role is responsible for the execution of HRSG installation and commissioning works within the assigned discipline, ensuring full compliance with safety, quality, schedule, and budget requirements. Roles and Responsibilities<ul><li>Supervise positioning of templates and embedded pieces prior to concrete pour</li><li>Review heavy lift plans for HRSG modules and drums</li><li>Supervise assembly of main and secondary steel structures, including access platforms</li><li>Supervise installation of HRSG casing panels and field-insulated joints to prevent hot spots</li><li>Supervise installation of HRSG modules and drums</li><li>Supervise HRSG piping installation, including valve and instrument positioning, welding, NDT, heat treatment, hydro testing, and preservation</li><li>Prepare hydro test plans and supervise execution</li><li>Prepare and supervise piping flushing, chemical cleaning, and air or steam blows to meet cleanliness requirements</li><li>Supervise safety valve hydro plug removal</li><li>Perform final HRSG audits prior to gas turbine first fire</li><li>Supervise piping thermal insulation works</li><li>Supervise paint application activities</li><li>Provide technical recommendations on installation techniques, tools, and resource requirements</li><li>Interface with the HRSG vendor’s engineering office</li><li>Participate in site coordination meetings and schedule/progress reviews</li><li>Ensure full compliance with site-specific rules, safety regulations, and environmental protection measures</li><li>Ensure subcontractors comply with site EHS requirements within the discipline scope</li><li>Document non-conformities, maintain logs, and track cost of non-quality</li><li>Issue regular progress reports to Site Management</li></ul>Required Qualifications<ul><li>Significant technical knowledge of HRSG systems</li><li>Strong technical understanding of gas-fired power plants and associated equipment</li><li>Minimum of 10 years’ relevant experience in a similar role, preferably within the power industry</li><li>Excellent written and verbal communication skills in English</li></ul>Desired Characteristics<ul><li>Strong oral and written communication skills</li><li>Strong interpersonal and leadership abilities</li><li>Proven problem-solving and analytical skills</li><li>Demonstrated ability to lead projects and teams</li><li>Ability to document, plan, and execute complex programs</li></ul>

Field Engineer - HRSG

HRSG Field Engineer Start Date: ASAP Project Duration: Approximately 8 months Working Hours: 60 hours (Monday–Saturday), with potential to increase to 72 hours depending on project needs Job Description Summary Our client is seeking a qualified and experienced HRSG Field Engineer to support HRSG installation and commissioning activities on a power plant project in PA. The role is responsible for the execution of HRSG installation and commissioning works within the assigned discipline, ensuring full compliance with safety, quality, schedule, and budget requirements. Roles and Responsibilities<ul><li>Supervise positioning of templates and embedded pieces prior to concrete pour</li><li>Review heavy lift plans for HRSG modules and drums</li><li>Supervise assembly of main and secondary steel structures, including access platforms</li><li>Supervise installation of HRSG casing panels and field-insulated joints to prevent hot spots</li><li>Supervise installation of HRSG modules and drums</li><li>Supervise HRSG piping installation, including valve and instrument positioning, welding, NDT, heat treatment, hydro testing, and preservation</li><li>Prepare hydro test plans and supervise execution</li><li>Prepare and supervise piping flushing, chemical cleaning, and air or steam blows to meet cleanliness requirements</li><li>Supervise safety valve hydro plug removal</li><li>Perform final HRSG audits prior to gas turbine first fire</li><li>Supervise piping thermal insulation works</li><li>Supervise paint application activities</li><li>Provide technical recommendations on installation techniques, tools, and resource requirements</li><li>Interface with the HRSG vendor’s engineering office</li><li>Participate in site coordination meetings and schedule/progress reviews</li><li>Ensure full compliance with site-specific rules, safety regulations, and environmental protection measures</li><li>Ensure subcontractors comply with site EHS requirements within the discipline scope</li><li>Document non-conformities, maintain logs, and track cost of non-quality</li><li>Issue regular progress reports to Site Management</li></ul>Required Qualifications<ul><li>Significant technical knowledge of HRSG systems</li><li>Strong technical understanding of gas-fired power plants and associated equipment</li><li>Minimum of 10 years’ relevant experience in a similar role, preferably within the power industry</li><li>Excellent written and verbal communication skills in English</li></ul>Desired Characteristics<ul><li>Strong oral and written communication skills</li><li>Strong interpersonal and leadership abilities</li><li>Proven problem-solving and analytical skills</li><li>Demonstrated ability to lead projects and teams</li><li>Ability to document, plan, and execute complex programs</li></ul>

Latest Data Centre Jobs

With over a decade of experience in energy recruitment, 9 of which he has worked at EarthStream, Chris is now the EMEA Managing Director. Starting his career in 2008, he has expanded his expertise from the UK market to encompass Europe, the Middle East, Africa, Asia, and the Americas. Chris' responsibilities include maintaining a compliant contract business spanning 80+ countries and adeptly managing major turnkey projects, ensuring adherence to budget, resource allocation, and strict timeframes. His leadership and deep industry knowledge have solidified his reputation as a trusted leader, driving EarthStream's success in the EMEA region.

Chris Rawley

EMEA Managing Director

Craig joins our EarthStream team as a Senior Account Consultant. With nearly a decade of recruitment experience, he specialised in the tech, infrastructure, and telecoms sectors, working across diverse markets in the US, UK, Europe, and Africa.

Craig Hulls

Senior Account Consultant

Dan brings 12 years of recruitment experience across both the IT and Engineering sectors, with a proven track record of supporting clients and candidates on complex, high-value projects. He began his career in IT recruitment, partnering with organisations delivering large-scale infrastructure projects and transformation programmes before transitioning into Engineering recruitment.  Since then, Dan has specialised in providing talent solutions across the offshore wind sector, major EPC projects, mission-critical environments, pharmaceuticals, data centres, and other large-scale industrial developments. His extensive industry knowledge and consultative approach enable him to connect skilled professionals with the organisations driving some of the world's most significant infrastructure and engineering projects.

Dan Masters

Associate Director

Rachel joins our team in our Spain office as a Senior Consultant with 8 years of experience specialising within the Controls and Automation sector. 

Rachel Bastin

Senior Consultant

Ryan has spent the last eight years in recruitment, partnering with clients and candidates across a range of technical, engineering, and project-driven industries. He began his career specialising in the offshore renewables sector, supporting businesses delivering major energy projects worldwide.  Over the years, Ryan has expanded his expertise into broader EPC and mission-critical markets, working across large-scale civil construction, pharmaceutical projects, data centres, and other complex infrastructure developments. His consultative approach and commitment to building long-term relationships enable him to gain a deep understanding of both client requirements and candidate aspirations, helping to create successful, lasting partnerships.

Ryan Watts

Manager

Simon joins our team as a Business Development Director with 14 years of experience in the energy recruitment sector.

Simon Cottenham

Business Development Director

With 8 years of experience in the Mission Critical and Renewable Energy spaces, Warwick joins our Industrial team as a Senior Consultant. While he predominantly covers site-based projects such as QA/QC and Commissioning, he also has experience with Project Management and blue-collar roles. 

Warwick Picozzi

Zac specialises in sourcing and placing QA/QC teams for key clients involved in Mission-Critical Construction Projects within Battery Manufacturing, Pharmaceutical & Data Centres across Europe. He has supported projects across various disciplines, such as CSA, Mechanical, Electrical, Project Controls, Planning, Automation & HSE. Zac has a proven track record of ensuring projects stay on schedule and remain within budget.

Data Centres

Specialisms

Latest Data Centre Jobs